The correct statement regarding the resolution of a grating is that the resolution increases with the number of grooves per mm, the correct option is (c).
The resolution of a grating is defined as the ability to separate two closely spaced spectral lines or wavelengths. It is determined by the number of grooves per unit length on the grating surface, as well as the wavelength of the incident light and the angle of incidence.
A higher number of grooves per mm means that the grating will disperse the incoming light into more angles, resulting in higher resolution. Therefore, the number of grooves per mm is the primary factor that determines the resolution of a grating, the correct option is (c).
To learn more about resolution follow the link:
https://brainly.com/question/30753488
#SPJ4
The complete question is:
Which statement is true regarding the resolution of a grating?
a. resolution increases with wavelength
b. resolution decreases with number of grooves per mm
c. resolution increases with number of grooves per mm
d. resolution is not determined by the monochromator
e. resolution increases with slit width
A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier.
The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.
In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.
To know more about microscope, here
brainly.com/question/18661784
#SPJ4
--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?
a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.
b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.
c. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--
the value of the total radiant energy flux density at the earth from the sun normal to the incident rays is called the solar constant of the earth. the observed value integrated over all emission wavelengths and referred to the mean earth-sun distance is:
The observed value of the total radiant energy flux density at the earth from the sun, integrated over all emission wavelengths and referred to the mean earth-sun distance, is approximately 1,366 watts per square meter.
This value is known as the solar constant and is an important factor in understanding the earth's climate and energy balance. It represents the amount of solar energy that is received per unit area at the top of the earth's atmosphere and is a key input for models of global climate change.
Learn more about energy flux
https://brainly.com/question/30480603
#SPJ4
How much heat does it take to raise the temperature of 5.0 kg of plastic from 15°C to 75°C? The specific heat of plastic is 2.60 kJ/(kg × °C).
where
m is the mass
c is the specific heat capacity
ΔT is the change in temperature
In your problem,
m=2.5 kg
c=2.60 kJ⋅°C-1kg-1
Δ
∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ
A student collected the data below on the time and distance traveled by a beetle.
Flight of a Beetle
OB. 1 m/s
O C. 1.25 m/s
Distance in meters (m)
OD. 4 m/s
€5.0
4.0
1.0 2.0 3.0 4.0 5.0
Time in seconds (s)
What was the beetle's average flight speed during the time represented in the graph?
O A. .75 m/s
3.0
2.0
1.0
Answer: the correct answer is option C) 1.25 m/s.
Explanation: The formula for average speed can be expressed as the quotient of the total distance traveled divided by the total time elapsed.
Upon examination of the presented graphical representation, it is evident that the beetle traversed a cumulative distance of 5 meters within a duration of 4 seconds.
Thus, it can be observed that the mean velocity of the beetle would be:
The mean velocity of the object is 5 meters per 4 seconds.
The mean velocity is equivalent to 1.25 meters per second.
The data depicted in the aforementioned graph indicates that the average velocity of the beetle during its flight is 1.25 meters per second.
what do you call a bar optic where there isn't an amount and it starts when pressure is applied and stops when it is released
The type of bar optic you are describing is commonly known as a "free flow pourer" or "free pour spout."
These types of pourers do not have a specific amount they dispense but instead rely on the bartender's skill to regulate the flow of liquid by applying and releasing pressure on the bottle. The flow of liquid stops when pressure is released, allowing for precise and controlled pouring.
Free flow pourers are commonly used in bars and restaurants to pour spirits, mixers, and other liquids into cocktails and drinks. They can come in a variety of sizes and materials, including plastic, metal, and silicone, and are easily replaceable when worn or damaged.
Learn more about bar optic
https://brainly.com/question/30694096
#SPJ4
An inductor is connected to a 20 kHz oscillator that produces an rms voltage of 9.0 V. The peak current is 60 mA. What is the value of the inductance L? Final answer in mH. Please explain step by step.
The value of the inductance L is approximately 1193.25 mH.
To solve for the value of the inductance L, we can use the formula:
Vrms = Ipeak * (2 * pi * f * L)
where:
Vrms = 9.0 V
Ipeak = 60 mA = 0.06 A
f = 20 kHz
Substituting the values into the formula:
9.0 V = 0.06 A * (2 * pi * 20,000 Hz * L
Simplifying:
L = 9.0 V / (0.06 A * 2 * pi * 20,000 Hz)
L = 9.0 / (0.007536)
L = 1193.25 mH (rounded to two decimal places)
Therefore, the value of the inductance L is approximately 1193.25 mH.
Learn more about inductance L
https://brainly.com/question/20471259
#SPJ4
An inductor is connected to a 20 kHz oscillator that produces an RMS voltage of 9.0 V. The peak current is 60 mA. The value of the inductance L is 1.692 mH.
Let's start by using the given information and then we'll solve for the value of the inductance L step by step:
1. Frequency of the oscillator (f) = 20 kHz = 20,000 Hz
2. RMS voltage (Vrms) = 9.0 V
3. Peak current (I_peak) = 60 mA = 0.06 A
Now, let's find the peak voltage (V_peak) using the relationship between RMS voltage and peak voltage:
Vrms = V_peak / √2
V_peak = Vrms * √2
V_peak = 9.0 V * √2 ≈ 12.73 V
Next, we'll calculate the impedance (Z) of the inductor using Ohm's law, which relates peak voltage and peak current:
Z = V_peak / I_peak
Z ≈ 12.73 V / 0.06 A ≈ 212.17 Ω
Now, we'll use the formula for the impedance of an inductor:
Z = 2 * π * f * L
Let's solve for the inductance L:
L = Z / (2 * π * f)
L ≈ 212.17 Ω / (2 * π * 20,000 Hz)
L ≈ 1.692 × 10^-3 H
Finally, convert the inductance L to millihenries (mH):
L ≈ 1.692 mH
So, the value of the inductance L is approximately 1.692 mH.
To learn more about inductor, refer:-
https://brainly.com/question/15893850
#SPJ11
1. Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice.
Now consider a patient who is told to keep hot compresses on an eye infection for 10 minutes. She discovers that her compress is no longer hot after only 5 minutes and therefore wants to keep it warm twice as long. Is the better strategy to use more hot water to keep it warm longer, or use the same amount of water as before, but just make the water hotter?
2. The desert sand is very hot during the day and very cold at night. What does this tell you about its specific heat capacity?
3. James Joule used a spinning set of paddles to heat the water in which they were placed, and by comparing the mechanical energy he put in, and temperature rise of the liquid afterwards, he determined the interconversion between mechanical and thermal energy. Inspired by Joule's experiment, you decide to heat your bath water by pushing your hand through it in circles. Estimate the total distance your hand will have travelled to raise the water temperature by 10°C in a typical bathtub. You may assume your hand exerts a continuous force of 50 N.
4. When cooking frozen cheese ravioli, the directions say to put the 255 grams of cheese-filled pasta into 3 quarts of boiling water. We want to explore, by calculations, why you are told to use 3 quarts when it's obvious that 1 quart would easily cover them all, and get dinner cooked even faster?
Suppose the ravioli are in the freezer at - 40 °C. You may consider the ravioli to have a specific heat of 0. 4 cal/gam-°C, both when frozen and when in water.
(A) By how much does the temperature of the 3 quarts of water drop when you add the frozen ravioli?
(B) How much would the water temperature drop if you used only 1 quart?
(C) So what is the answer? Why do they ask for 3 quarts?
5. The energy of a thunderstorm results from the condensation of water vapor in humid air. Suppose a thunderstorm could condense all the water vapor in 10 km3 of air.
How much heat does this release?
(You may assume each cubic meter of air contains 0. 017 kg of water vapor. )
How does this compare to an atomic bomb which releases an energy of 2 x 1010 kcal?
The given Statement "Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice." is True . Because, When an injury like black eye occurs, blood vessels in affected area can become damaged and leak blood, causing swelling and inflammation.
Applying ice to area can help to constrict blood vessels, slowing down the flow of blood and reducing amount of blood that accumulates in affected area. This can help to reduce swelling and inflammation, as well as alleviate pain and discomfort. Heat can cause blood vessels to dilate which can increase blood flow and promote healing in some cases.
To know more about blood flow, here
brainly.com/question/14781793
#SPJ4
--The complete Question is, ''Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice. ''
State True or False'-
The __________ notation of entity-relationship modelling can be used for both conceptual and implementation modelling.
a. Bachman
b. UML
c. Chen
d. Crow's Foot
The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling.
The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling. Notation refers to the symbols and conventions used to represent concepts in a model. Entity-relationship modelling is a technique used in database design to represent the relationships between entities. Conceptual modelling is the process of creating a high-level representation of a system, while implementation modelling involves creating a detailed representation of the system's implementation.
To learn more about Chen notation Here:
https://brainly.com/question/28234454
#SPJ11
3. When the procedure is repeated with a third line how will it distinguish whether the location of the center of gravity is accurate or not?
If the procedure is repeated with a third line, it will distinguish whether the location of the center of gravity is accurate or not by checking if the intersection point of the three lines passes through the same point as the previous two lines.
This is because the intersection of the third line with the other two lines should also pass through the same point as the previous two lines if the location of the center of gravity is accurate. If the intersection point of the third line is not consistent with the previous two, then it suggests that the location of the center of gravity is not accurate.
To know more about intersection point , here
brainly.com/question/14217061
#SPJ4
voyager 1 is a space probe launched by nasa in 1977 and is the farthest human-made object. it experiences negligible gravity. voyager 1 is propelled by thrusters but will run out of fuel by 2040. what will happen to voyager 1 after this date?multiple select question.the velocity of voyager 1 will remain unchanged.voyager 1 will slow down from the velocity it will have when the fuel runs out.voyager 1 will immediately stop.voyager 1 will continue moving with the speed it will have when the fuel runs out.
Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.
Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.
Learn more about Voyager 1
https://brainly.com/question/3412409
#SPJ4
A 55 kg skater is gliding along the ice at a velocity of 8 m/s to the right while holding a 3 kg ball. The skater throws the ball at a velocity of 4 m/s to the right. What will be the skaters velocity after throwing the ball?
Answer:
Speed of Skater = 8.16 m/s
Explanation:
Using kinetic energy:
[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]
This gives the skater a velocity of 8.16 m/s after throwing the ball
Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would be
expected to
O experience an increase in frequency.
O experience a decrease from transverse waves to longitudinal waves.
O experience a decrease in frequency
O experience an increase in their amplitude.
7
8
9 10 11 12 13 14 15 16 Next
Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would experience a decrease in frequency.
option C.
What is Doppler effect?The Doppler effect is a phenomenon where the frequency of waves (such as electromagnetic waves or sound waves) is shifted as a result of the relative motion between the source of the waves and the observer. When a source of waves is moving away from an observer, the waves get stretched out, resulting in a decrease in frequency. This is known as redshift for light waves, which are a type of electromagnetic waves.
In the context of a galaxy moving away from Earth, the electromagnetic waves (such as light) emitted by the galaxy would experience a redshift, which means the frequency of the waves would decrease. This is a key observation in astronomy and cosmology that has been used to provide evidence for the expanding universe and the Big Bang theory, as galaxies in the universe are generally observed to be moving away from each other, causing their light to be redshifted.
Learn more about doppler effect here: https://brainly.com/question/3841958
#SPJ1
If 5.4 J of work is done in raising a 178 g apple, how far is it lifted? Assume
9 = 9.81 m/s?.
Answer in units of m. Answer in units of m.
Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).
Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.
The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:
weight = mass x acceleration due to gravity.
we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.
Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).
Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.
to resolve two point sources, what distribution of cones must occur where the image strikes the retina?
The distribution of cones at the point of image formation is crucial in resolving two point sources
To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.
In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.
The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .
To learn more about : distribution
https://brainly.com/question/28027633
#SPJ11
a horizontal force of 80 n used to push a chair across a room does 320 j of work. how far does the chair move in this process?
The amount of work done by the force of 80 n is 320 j. Work is calculated by multiplying the force (F) by the distance (d) moved. Therefore, d = 320/80 = 4 m. This means that the chair moved 4 m in the process.
Energy is transformed into work when it takes another form.
In this instance, the chair is being moved across the room by the force of 80 n, which is transmitting its energy to it as labour. In joules (J), this energy is expressed.
As a result, the work produced by the force of 80 n is equivalent to the 320 J of energy that was transmitted. This quantity of energy is equivalent to the 4 m that the chair has travelled.
Complete Question:
A horizontal force of 80 n used to push a chair across a room does 320 j of work. How far does the chair move in this process?
To learn more about work visit:
https://brainly.com/question/25573309
#SPJ4
an air parcel rises over a mountain and cools adiabatically. which lifting mechanism has acted on this parcel?
The mountain or orographic lifting mechanism has acted on the air parcel, causing it to rise and cool adiabatically as it moves up and over the mountain.
A mountain presents a physical barrier that pushes an air parcel to ascend when it rises over it. Orographic lifting is the term for this procedure. The parcel undergoes a drop in pressure as it rises, which causes adiabatic cooling. The air parcel cools due to adiabatic expansion as it climbs, which causes a decrease in temperature.
The dry adiabatic lapse rate, which measures the temperature drop as 10°C per 1000 metres of climb, is used to describe this phenomenon. The air's ability to condense and form clouds in response to cold may also result in precipitation.
Learn more about orographic lifting:
https://brainly.com/question/12489498
#SPJ4
Orographic lifting mechanism has been used.
Orographic lift of moist air coming off the ocean produces clouds along the Santa Lucia Mountains south of Monterey, California, USA (Credit: NOAA). As an example, the North Shore mountains immediately north of Vancouver often experience heavy rain and snowfall due to orographic uplift.
Detailed Answer - Hi! The lifting mechanism that has acted on the air parcel as it rises over a mountain and cools adiabatically is called Orographic Lifting. This occurs when an air mass is forced to rise over elevated terrain, such as a mountain, causing it to cool and potentially form clouds or precipitation.
to learn more about orographic lifting, click here -
brainly.com/question/8912667
#SPJ11
seamus made an electromagnet from an iron nail, a piece of copper wire with three coils spread out across the nail, and a aaa-sized battery. he's magnet attracts only one paper clip, and he wants to boost the power of his magnet to attract at least four paper clips. what two things can seamus do to accomplish his goal? responses seamus can add batteries to decrease the voltage, and he can increase the space between the wire coils. seamus can add batteries to decrease the voltage, and he can increase the space between the wire coils. seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. seamus can add batteries to decrease the voltage, and he can decrease the space between the wire coils. seamus can add batteries to decrease the voltage, and he can decrease the space between the wire coils. seamus can add batteries to increase the voltage, and he can increase the space between the wire coils. seamus can add batteries to increase the voltage, and he can increase the space between the wire coils.
Seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils.
This will increase the magnetic field strength and attract more paper clips. Another option would be to add more coils to the wire, which would increase the magnetic field strength as well. Seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. By doing these two things, he will be able to boost the power of his electromagnet and attract at least four paper clips.
More on voltage: https://brainly.com/question/13863356
#SPJ11
when a fan is turned off, its angular speed decreases from 10 rad/s to 4.4 rad/s in 2.50 s. what is the magnitude of the average angular acceleration of the fan? a. 0.86 rad/s2 b. 2.24 rad/s2 c. 0.37 rad/s2 d. 11.0 rad/s2 e. 1.20 rad/s2
The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.
The average angular acceleration can be calculated using the formula:
average angular acceleration = (final angular speed - initial angular speed) / time
Plugging in the given values, we get:
average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s
average angular acceleration = -2.56 rad/s2
Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.
|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .
Therefore, the correct answer is (b).
To know more about magnitude, here
brainly.com/question/14452091
#SPJ4
based on the reading of the geiger counter, which type of radiation do you think is primarily emitted from the fiesta ware plate?
Based on the reading of the Geiger counter, it is likely that the Fiesta Ware plate is emitting beta radiation.
Beta radiation consists of high-energy electrons or positrons that can penetrate through skin and clothing but can be stopped by a thin sheet of metal. This type of radiation is commonly emitted by radioactive materials such as strontium-90, which was often used in the production of Fiesta Ware.
Beta radiation (β) is the transmutation of a neutron into a proton and an electron (followed by the emission of the electron from the atom's nucleus: e − 1 0 ). When an atom emits a β particle, the atom's mass will not change (because there is no change in the total number of nuclear particles).
To know more about Beta Radiation, please click:
brainly.com/question/16645044
#SPJ11
The tire had an initial volume of 7 liters, at a temperature of 25° C. After driving for an hour, friction from the road had increased the temperature of air in the tire to 35° C. Assuming the pressure inside the tire did not change, what would the tire’s new volume be?
Answer:
using
V2= V1T2/T1
V2= 9.8L
after the switch s is closed, what will be the current in the circuit at the instant that the capacitors have lost 80.0% of their initial stored energy?
After switch S is closed, the capacitors in the circuit start to discharge.
The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],
where C is the capacitance of the capacitors and V is the initial voltage across them.
As the capacitors discharge, the voltage across them decreases and so does the stored energy.
When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.
At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.
Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.
For more such answers on Capacitance
https://brainly.com/question/16998502
#SPJ11
what is the power, in diopters, of eyeglasses that will correct his vision when held 1.50 cm from his eyes?
To calculate the power, in diopters, of eyeglasses that will correct vision when held 1.50 cm from the eyes, you need to know the individual's refractive error in diopters.
Refractive error refers to the degree of near sightedness (myopia), farsightedness (hyperopia), or astigmatism that an individual has. This value is typically measured by an optometrist or ophthalmologist using a phoropter.
Once the refractive error is known, the power of the corrective eyeglasses can be determined by dividing the refractive error by the distance (in meters) between the glasses and the eyes. In this case, since the glasses are held 1.50 cm from the eyes, the distance in meters would be 0.015 meters.
For example, if the individual has a refractive error of -2.00 diopters, the power of the corrective eyeglasses when held 1.50 cm from the eyes would be -2.00 / 0.015 = -133.33 diopters.
To know more about Refractive error:
https://brainly.com/question/30162760
#SPJ11
imagine that two identical asteroids crashed into the same type of rocks on the surface of the moon and earth. both impacts produce craters. how will the craters compare?
The crater on the moon will be more well-preserved than the crater on the Earth.
The main reason for this is the lack of atmosphere on the moon. On Earth, the atmosphere absorbs some of the energy from the impact, reducing the severity of the crater. Additionally, erosion from wind and water can also affect the appearance of the crater on Earth. On the moon, however, there is no atmosphere to absorb the energy from the impact, so the crater will retain its original shape and size for a longer period of time.
The moon also lacks the same degree of erosion processes as Earth. As a result, the craters formed on the moon are often well-preserved and can be used to study the history of impacts on the lunar surface.
To learn more about crater on the moon, here
https://brainly.com/question/24409142
#SPJ4
another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:
The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.
When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:
[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]
Where C1, C2, ..., Cn are the capacitances of the individual capacitors.
Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.
Learn more about circuit's capacitance.
https://brainly.com/question/28884207
#SPJ4
the average temperature of mars is lower than that of earth. if a distant observer measures the infrared radiation from both mars and earth, then
If a distant observer measures the infrared radiation from both Mars and Earth, they would find that Earth emits more infrared radiation than Mars.
If a distant observer measures the infrared radiation from both Mars and Earth, they would observe that Mars emits less infrared radiation compared to Earth. This is because the average temperature of Mars is much lower than that of Earth, and objects with lower temperatures emit less infrared radiation. Therefore, the observer would detect more infrared radiation coming from Earth compared to Mars.
To know more about Infrared Radiations , click on this -
brainly.com/question/20779091
#SPJ11
A distant observer measuring the infrared radiation from both Mars and Earth would observe that Mars emits less infrared radiation than Earth, indicating a lower average temperature.
When the temperature of is about absolutely zero, all bodies emits infrared radiations. This amount of radiation highly depends on the temperature of the body.
As we assume this, Mars has a lower average temperature as compared to Earth, Mars emits less IR rays. Therefore, a distant observer measuring the infrared radiation from both planets would observe that Mars emits less radiation than Earth. Hence, this is the logic we are using to conclude that there is a lower temperature on Mars than Earth.
To know more about Infrared rays, visit,
https://brainly.com/question/29796311
#SPJ4
in a(n) ____ joint the edges of the metal meet so that the thickness of the joint is approximately equal to the thickness of the metal.
In a butt joint, the edges of the metal meet so that the thickness of the joint is approximately equal to the thickness of the metal.
In a butt joint, the edges of the metal pieces are placed together so that they are flush with one another, with little or no overlap. This results in a joint where the thickness of the joint is approximately equal to the thickness of the metal being joined. Butt joints are commonly used in welding and metal fabrication, as they provide a clean, simple joint that can be easily welded or brazed together. However, they may not be as strong as other types of joints, such as lap joints or T-joints, which provide more surface area for welding or brazing.
To learn more about metals, refer:-
https://brainly.com/question/28650063
#SPJ11
In welding, a joint refers to the area where two pieces of metal are joined together. There are several types of joints used in welding, including butt joints.
A butt joint is formed when two pieces of metal are placed together, edge to edge, and welded.
The joint is formed so that the thickness of the joint is approximately equal to the thickness of the metal being joined.
The process of making a butt joint involves
1) first preparing the edges of the metal.
2) This may involve grinding or filing to ensure that the edges are clean and straight.
3) The two pieces of metal are then brought together, with their edges touching, and held in place using clamps or other devices.
4) Once the pieces are in place, a welding machine is used to fuse the metal together.
The welding process may involve the use of heat or pressure, or a combination of both, depending on the type of welding being used.
The resulting joint is strong and durable, and is often used in a variety of applications where a strong, seamless joint is needed.
Butt joints are commonly used in the construction of buildings, bridges, and other structures, as well as in the manufacturing of machinery and equipment.
To know more about butt joint visit link :
https://brainly.com/question/31733313
#SPJ11
Earth's sky is blue during the day because:a. the molecules in the atmosphere scatter blue wavelengths of lightb. the atmosphere absorbs blue wavelengths of lightc. the sun produces more blue wavelengths than it produces in any other colord. red wavelengths are lost as solar radiation passes through the vacuum of space
The molecules in the Earth's atmosphere scatter blue wavelengths of light, making the sky appear blue during the day. The correct answer is a.
This phenomenon is known as Rayleigh scattering, which occurs when sunlight enters the Earth's atmosphere and interacts with the gas molecules in the air. The shorter, blue wavelengths of light are more easily scattered by the molecules in the atmosphere, while the longer, red wavelengths are less affected and continue to travel in a more direct path.
As a result, when we look up at the sky during the day, we see a blue color because the blue light is being scattered in all directions by the atmosphere. At sunrise and sunset, the sky appears more orange or red because the sun's light has to travel through more of the atmosphere, causing more scattering of the shorter, blue wavelengths and leaving more of the longer, red wavelengths to reach our eyes.
Learn more about Earth's atmosphere
https://brainly.com/question/13154099
#SPJ4
what is the largest x-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm?
The largest x-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm is 0.632 nm.
To find the largest X-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm, we can use Bragg's Law:
nλ = 2d sinθ
where n is an integer representing the order of diffraction, λ is the wavelength, d is the separation between crystal planes (0.316 nm), and θ is the angle of incidence. To find the largest possible wavelength, we need to consider the lowest order of diffraction (n = 1) and the maximum angle of incidence (θ = 90°).
Now we can plug in the values and solve for λ:
1λ = 2(0.316 nm) sin(90°)
λ = 2(0.316 nm) * 1
λ = 0.632 nm
The largest X-ray wavelength that can be diffracted by crystal planes is 0.632 nm.
Learn more about Bragg's Law:
https://brainly.com/question/14617319
#SPJ11
Modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods. True/False
False. Here is a step-by-step explanation:
1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.
2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.
3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.
4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.
5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.
6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.
7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.
8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.
9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.
10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.
To know more about Modern geologists :
https://brainly.com/question/28274168
#SPJ11
mine C contient 1000 mg
d'acide ascorbique. Il
se prend dans un verre
d'eau de 20 CL.
1. Une orange contient
115 mg d'acide ascorbique. Combien faut-il d'oranges
pour obtenir la même masse d'acide ascorbique que
le comprimé ?
2. Il faut environ trois oranges pour obtenir 200 mL de
jus. Quelle est la concentration en acide ascorbique
du jus d'orange ?
3. Quel volume de la solution obtenue avec le comprimé
dans le verre contient la même masse d'acide ascor-
bique que ces trois oranges ?
4. Quel volume d'eau faut-il ajouter au verre contenant
le comprimé pour obtenir la même concentration en
acide ascorbique que le jus d'orange ?
Answer:
Explanation: honestly i don’t speak spanish so please explain with english