Answer:
Option A an E.
Explanation:
Energy can be described as the capability to do work. It is what has to be transferred to an object in order to get this object to do work. Energy can be in various forms such as heat energy, kinetic, potential, electrical, chemical, nuclear etc.
It takes energy to do quite a number of things, from cooking food to driving and also in engaging in exercises.
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
I could swear all of these are nobles gases but here’s the question.
Which one of these is NOT a Noble Gas
A) Argon
B) Helium
C) Xenon
D) Neon
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
The food colouring mixes through the hot water faster than it mixes with the cold water, this is because in hot water the water molecule have more energy and are moving faster than the molecules of cold water .This makes it easier for the food colouring to get mixed quickly through the hot water.
A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.
Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol
Explanation:
[tex]\pi=CRT[/tex]
where,
[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg = 0.0026 atm
i = Van't hoff factor = 1 (for non-electrolytes)
Mass of solute (polypeptide) = 1.8274 g
Volume of solution = 274 mL
R = Gas constant = [tex]0.0821Latm/Kmol[/tex]
T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]
Putting values in above equation, we get:
[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]
[tex]M=64106g/mol[/tex]
Hence, the approximate molecular weight of the poymer is 64106 g/mol
Can you help me please
Answer:
Explanation:
h
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation:
From point A to point B, the car will . From point B to point C, the car will . Assuming the washer on the car is not blocked by the book, once the car hits the book, the washer will still have . This experimental design will examine Newton’s law.
Answer:
Accelerate, Have Constant velocity, Velocity, and First
Explanation:
Got it right on edge. have a wonderful day!!!
From point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
What is Newton’s law ?The link between an object's motion with even the forces acting on it is outlined by Newton's laws of motion, which were three fundamental principles of classical mechanics.
What is velocity?The displacement of the item in one unit of time would be the definition of velocity.
Therefore, from point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
To know more Newton’s law and Velocity
https://brainly.com/question/27573481
#SPJ3
HELP ME PLEASE ILL GIVE EC AND BRAINLESTPhotosynthesis
Matter and Energy
Claim-Evidence-Reasoning
Name:
Date:
Scenario
Below is the equation of photosynthesis. Photosynthesis is a process that takes place in plants.
Notice that CO, and water are converted into sugar and oxygen.
External Data
600,
6 H,0
Water
light Cº,
+
602
+
Oxygen
ton Dede
Sugar
Prompt:
When you go home Dnight, your mother asks you to explain to her what happens during the
process of photosynthesis. Your mother is a science teacher, so make sure you use scientific terms
to give her a scienífic explanation of how energy is stored as sugar in plants through
photosynthesis.
I
Claim:
Evidence:
Reasoning:
Rebuttal:
Answer:
photosynthesis happens when spring is happening because of the pollen and soil
Explanation:
Help please for this problem.
Characteristics of a substance that describe its' ability to change into a different substance are called?
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
List and Describe the two groups of clastic sedimentary rock.
Answer:
Clastic sedimentary rocks are formed from rock fragments or clasts; chemical sedimentary rocks precipitate from fluids, and biochemical sedimentary rocks form as precipitation from living organisms.
Sedimentary rock is classified into two groups based on how they form. They are clastic and chemical. Clastic sedimentary rock is formed as bits of weathered rock become cemented together. Because all kinds of rock are subject to weathering many different minerals can make up this group of rocks.
Which statement best describes the polarity of the molecule Sil4?
Answer:
I dont a picture
Explanation:
but the answer is 24
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
Can someone please fill in the blanks?
Answer:
g3gegsgehshhwwjwuwuwu2euyeeyeyyy
Answer:
helium formula He
Ammonia formula NH3
methane formula CH₄
chlorine formula Cl-
Explanation:
Which set of coefficients will balance this chemical equation?
__C2H4(g) + __O2(g) → 2CO2(g) + 2H2O(g)
Answer:
Explanation:
USE UR PERDICIRTON TABLE
Environmental factors can influence the way genes are ________________.
Answer:
Similarly, drugs, chemicals, temperature, and light are among the external environmental factors that can determine which genes are turned on and off, thereby influencing the way an organism develops and functions.
Explanation:
Determine the number of molecules present in 1.53 mol of carbon monoxide
Answer:
hi
Explanation:
this is my first time on this app so what do i do
In an experiment, how many variables should you change at a time? And why?
Answer:
it should test one variable at a time.
Explanation: because you will not be able to tell which variable is responsible for the observed results.
The Olympian swam 200 meters in 20 seconds.
1) velocity
2) acceleration
3) speed
Answer: velocity
Explanation:
What is an important effect of gravity?
Answer:
pulling objects with mass closer to each other
Explanation:
that is the only role of gravity
Which statement are part of the safety protocol for this lab experiment?
Answer:
Always wear safety goggles when performing an experiment.
Use caution when constructing the track.
Ensure that the track is clear before releasing cars.
Report all accidents to the teacher.
Explanation:
plsss help ive been stuck on this for a week
Answer:
Thomson's atom model.
Explanation:
His model is the plum pudding model of an atom. There are negatively charged subatomic particles or electrons placed within positively charged matter.
Hope this helps!
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
Facts about flooding
Answer:
No region is safe from flooding. All 50 states are subject to flash floods.[1]
Flash floods can bring walls of water from 10 to 20 feet high.[2]
A car can be taken away in as little as 2 feet of water.[3]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[4]
Flooding is caused by spring thawing (snow and frozen grounds melting in the spring), heavy rains, snow melt runoffs, flash floods, and mudflows.[5]
Floods are the most widespread natural disaster aside from wildfires. 90% of all U.S. natural disasters declared by the President involve some sort of flooding.[6]
In preparation for a flood, it is important to stock up on first aid items, non-perishable foods, 3 gallons of water per person for 3 days, battery operated radio for weather reports, extra batteries, personal hygiene necessities.[7]
Based on Floodsmart, a 2,000 square foot home undergoing 12” of water damage could cost more than $50,000.[8]
Since flood damage is almost never covered by homeowners insurance, flood insurance is important for people living in high-risk flood zones.[9]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[10]
Communities particularly at risk are those located in low-lying areas, near water, or downstream from a dam.[11]
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
Please help I’ll even give you brainliet
What is the molecular formula for a compound that is 34.31% sodium, 17.93% carbon, 47.76% oxygen and has a molar mass of 134.00g?
Answer: Na2C2O4 probably sodium oxalate
Explanation: assume you have 100 g substance.
Mass of Na is m(Na) = 34.31 g, m(C) = 17.93 g and m(O) = 47.76 g.
Calculate moles n(Na) = 34.31 g/22.99 g/mol= 1.49 mol.
For C n(C) = 1.49 mol and n(O) = 2.985. You divide all by 1.49 you
Get n(Na) : n(C) : n(O) = 1:1:2 M(NaCO2) = 67 g/mol.
Divide 134:67 = 2. You get formula Na2C2O4
Buoyancy, density, ductility and solubility describe the ________ of matter
Answer:
the answer is physical properties
if water is added to a 0.70 molar solution of CuSO4 what will change
A. molarity will increase
B. Molarity will decrease
C. the amount of CuSO4 will decrease
D. No change in molarity or amount of salute
Answer:
B. Molarity will decrease
Explanation:
Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.
In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.