Which statement is the best interpretation of the ray diagram shown?

A. A convex lens forms a larger, virtual image. B. A convex lens forms a larger, real image.
C. A convex mirror forms a larger, real image.
D. A convex mirror forms a larger, virtual image.​

Answer:

You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.

Explanation:

Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.

[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the concept of Net force on a body.

We know that net force on a body is the force that is calculated from all direction and added , if there is any force remained at last, then the forces are unbalanced,

and if the net force on a body is Zero, then it is a balanced force,

here,

Force to left on skier = 50 N

Force to right on skier = 40 N

hence the net force = left force - right force

Net force = 50 - 40 ==> 10 N

hence the Net force is 10 N in the left direction of the skier.

Answer:

Explanation:

11.) d

12.) f

13.) c

15.) i

pls give me brainliest

Answer:

Oxygen or more precisely, the O-15 isotope.

Answer:

The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.

Explanation:

Answer:

Disadvantages of Nuclear Power

The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.

Explanation:

Answer:

trueeeee

Explanation:

Answer:

B because 17100 is the half of the carbon

Answer:

C a fast-moving cold front moved through the area.

Explanation:

This is because, since there is a there is a thunderstorm and high winds in the area, this can only be caused by a fast moving front. Also there is a temperature drop, this can only be caused by the fast moving cold front since a cold front has a low temperature.

Thus, for the area to experience thunderstorms with high winds and a drop in temperature, a fast-moving cold front moved through the area.

Answer:

160000 calories or 669440 Joules

Explanation:

Using the formula as follows;

Q = L × m

Where;

Q = amount of heat (J)

L = specific latent heat

m = mass (g)

* Latent heat (L) required for melting of ice is 80 calories/grams.

* Mass of ice in grams = 2kg × 1000 = 2000g.

Hence, Q = 80 × 2000

= 160000 Calories

1 calorie = 4.184J

160000 calorie = 160000 × 4.184

= 669440J

Answer:

E: None of the above

Explanation:

Since the force on the wire F = ∫idL × B where i = current in wire = 2.0 mA = 2.0 × 10⁻³ A, dL = vector length of wire = dyj and we integrate from y₁ = 0 m and y₂ = 0.25 m, and B = magnetic field = (0.3y)i + (0.4y)j

So, F = ∫idL × B

and we integrate from y₁ = 0 m and y₂ = 0.25 m

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + (0.4y)j]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + dyj m × (0.4y)j]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[(0.3y) × dy(j × i) + 0.25 × (0.4y)(j × j)]

F = 2.0 × 10⁻³ A∫₀⁰°²°⁵[(0.3ydy(-k) + 0.1y)(0)]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵(-0.3ydy)k

F = 2.0 × 10⁻³ A[-0.3y²/2]₀⁰°²⁵k

F = -2.0 × 10⁻³ A[0.3(0.25)²/2 - 0.3(0)²/2]k

F = -2.0 × 10⁻³ A[0.3(0.0625)/2 - 0]k

F = -2.0 × 10⁻³ A[0.3(0.0625)/2]k

F = -1 × 10⁻³[0.01875]k N

F = -[0.01875 × 10⁻³]k N

F = -[1.875 × 10⁻⁵]k N

Since the answer is not contained in the options, the answer is E.

Answer:

Explanation:

Here, we are asked to calculate the average speed in km/minute.

As we know that,

Here,

→ Total distance = 10 km + 10 km

→ Total distance = 20 km

→ Total time = 8 minutes + 2 minutes

→ Total time = 10 minutes

Substitute the values in the formula of average speed,

→ Average speed = Total distance ÷ Total time taken

→ Average speed = 20km ÷ 10 minutes

Our solar system is the only place in the universe where gravity played a key part in the formation of planets.

This is Flase

Answer:

0.500 T

Explanation:

Since the change in time and the number of coils are both 1, I set the problem up to be 1.3=(1.5(x)-13(x)). I then plugged in numbers for x until I got the answer to be 1.3 V.

Answer: Yes

Explanation:

Given

Martin initial speed is [tex]u=20\ m/s[/tex]

Stones is at 170 m ahead

Deceleration [tex]a=2\ m/s^2[/tex]

Using the equation of motion [tex]v^2-u^2=2as[/tex]

Insert the values

[tex]0-20^2=2\times (-2)s\\s=\dfrac{400}{4}\\\\s=100\ m[/tex]

So, it took 100 m to stop completely. Hence martin will be able to stop in time.

Answer:

c. Protons and electrons

Explanation:

electrons carry out negative charge

protons carry out positive charges

Answer:

Increasing temperatures evaporate water faster, causing an increase in salinity.

Explanation:

When the water molecules of the ocean become heated, they expand. ... Since warmer water thus can hold more salt and other molecules than cold water; it can have a higher salinity.

The correct option is C, increasing temperatures cause faster evaporation of water which results in an increase in salinity.

Hence we can conclude that as the temperature rises, the process of evaporation takes place more rapidly which decrease the concentration of salt in water, which leads to higher salinity.

Learn more about temperature mapping here:

https://brainly.com/question/1418606

#SPJ10

Answer:

Req= 220 ohm

Explanation:

In series combination just add the resistances.

Req=R1+Req(23)

Req=100+120

Req= 220 ohm

Answer:

sorry

Explanation:

Answer:

Thermal energy can be transferred to one object to another in the form of heat. It causes molecules and atoms to collide with each other because of the rising of heat.

Explanation: Well thermal energy is a example of kinetic energy. It is heated by motion. It is heat that can be measured

Answer:

[tex]\rho=3\times 10^{-8}\ \Omega-m[/tex]

Explanation:

Given that,

Voltage, V = 120 V

The length of the wire, l = 20 m

The current density of the wire, [tex]\dfrac{I}{A}=2\times 10^8\ A/m^2[/tex]

We need to find the resistivity of this wire. We know that,

[tex]R=\rho \dfrac{l}{A}[/tex]

Where

[tex]\rho[/tex] is the resistivity of wire

Also, [tex]R=\dfrac{V}{I}[/tex]

So,

[tex]\dfrac{V}{I}=\rho \dfrac{l}{A}\\\\\rho=\dfrac{V}{l\dfrac{I}{A}}[/tex]

Put all the values,

[tex]\rho=\dfrac{120}{20\times 2\times 10^8}\\\\=3\times 10^{-8}\ \Omega-m[/tex]

So, the resistivity of this wire is equal to [tex]3\times 10^{-8}\ \Omega-m[/tex].

Answer: A.) concave lens

Explanation: i hope this helps shawtay :)

In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.

A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.

Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."

A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.

Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6

Explanation:

the correct answer is (true) if am not mistaking incase am wrong sorry

Answer:

Let No be initial no of atoms

N = N0 / 2      after 1 half-life

N = N0 / 4     after 2 half-lives

So after 2 half-lives 20 of the 80 atoms remain

Answer:

If I did my calculations correctly then the answer is 11 but I may be weong

Answer:

it's 11

gkccgkxcgikvxxkg

Answer:

D) 1 & 2

Explanation:

Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil

Answer:

longitudinal

Explanation:

Answer:

W = 0 J

Explanation:

The amount of work done by gas at constant pressure is given by the following formula:

[tex]W = P\Delta V[/tex]

where,

W = Work done by the gas

P = Pressure of the gas

ΔV = Change in the volume of the gas

Since the volume of the gas is constant. Therefore, there is no change in the volume of the gas:

[tex]W = P(0\ m^3)\\[/tex]

W = 0 J