Answer: The Molecules that make up maple syrup have a harder time moving past one another because they are larger than the molecules that make up orange juice
Explanation:Ap3x
The correct statement about the viscocity of the maple syrup is that the Molecules that make up maple syrup have a harder time moving past one another because they are larger than the molecules that make up orange juice.
What is viscosity?The resistance of a fluid (liquid or gas) to a change in shape or movement of adjacent sections relative to one another is called viscosity. Viscosity indicates resistance to flow.
The Molecules that make up maple syrup have a harder time moving past one another because they are larger than the molecules that make up orange juice is correct as it is related to movement.The molecules that make up maple syrup are positive ions, while the molecules that make up orange juice are negative ions as viscosity is not related to the charge.The molecules that make up maple syrup have a harder time moving past one another because they are smaller than the molecules that make up orange juice is incorrect because the small molecules relatively have great movement.The molecules that make up maple syrup are negative ions, while the molecules that make up orange juice are positive ions is also wrong.Hence the correct statement is that the Molecules that make up maple syrup have a harder time moving past one another because they are larger than the molecules that make up orange juice.
To know more about viscosity, visit the below link:
https://brainly.com/question/2684299
#SPJ2
How many electrons will aluminum gain or lose in forming an ion?
Answer:
It would tend to gain one electron and form a -1 ion. Aluminum is in the fifth column and therefore has 5 electrons in its outermost shell. It would tend to lose three electrons and form a +3 ion.
Explanation:
If helpful, please mark as brainliest! =)
Aluminum (Al) is an element with atomic number 13, which means it has 13 protons and 13 electrons in its neutral state.
How does aluminum form ionWhen forming an ion, aluminum tends to lose three electrons. This is because aluminum belongs to Group 13 in the periodic table, also known as the "boron group" or "Group IIIA."
Elements in this group have three valence electrons in their outermost energy level. To achieve a stable electron configuration, aluminum can lose these three valence electrons, leaving behind a complete inner electron shell and forming a 3+ cation.
So, when aluminum forms an ion, it loses three electrons to become Al3+.
Learn more about electrons at
https://brainly.com/question/860094
#SPJ6
A truck was carrying a substance tank. The molecules of that substance were moving away from each other. The molecules truck parked overnight in a place where energy tranferred out of the substance. In the morning, the substance was a gas. How were the molecules moving in the morning? Explain why the molecules were moving that way after the energy was tranferred out of them.
Answer:
Molecules of matter such as liquid, gas and solid still move even if the energy is transferred because it isn't a hundred percent. There is still energy and the time it took to transfer that said energy would have changed its state of matter.
Explanation:
Solid -the molecules are tight together. (touching)
Liquid - the molecules are close but not touching about mid way(not to far not to close)
Gas- the molecules in gasses are far apart.
It almost always goes from solid to liquid to gas. but in extreme conditions it could be different.
If it helped please give a thanks on the thanks button
Hope you have a wonderful day :)
Which statement is true? a. Energy is capability of doing work b. A cup of water has kinetic energy c. Kinetic energy is stored energy in substances. d. Potential energy is enery in motion. e. Heat and electricity are different forms of energy
Answer:
Option A an E.
Explanation:
Energy can be described as the capability to do work. It is what has to be transferred to an object in order to get this object to do work. Energy can be in various forms such as heat energy, kinetic, potential, electrical, chemical, nuclear etc.
It takes energy to do quite a number of things, from cooking food to driving and also in engaging in exercises.
Silver has a density of 10.5 grams/cm3. What would be the mass of a 5 cm3 piece of sliver
Answer:
52.5 g
Explanation:
Density= mass/volume
Rearranging the equation gives us m= d(V)
m= d(V)
m= (10.5 grams/cm^3)(5 cm^3)
m= 52.5 g
ANSWER FAST
is water wet?
a.) yes
b.) no
c.) a baby goat is a kid
Answer:
c
Explanation:
is heating an aluminum pan a chemical or physical reaction
Answer: chemical
Explanation: whenever heat is applied, it indicates a chemical change
True or False. Physical changes result in the formation of a new substance.
True or False. A major clue to a chemical change is the formation of a new
substance.
Answer:
1. false
2. true
Explanation:
I hope this helps
hi help plz .........
Answer:The answer is C) The total mass of C and D only.
I NEED HELP ON THIS SCIENCE QUESTION
The triple point of water occurs at a pressure of 4.59 mmHg.
What is the pressure in atm?
Answer:
The pressure in atm is 6.04 x 10^-3
Explanation:
Pressure of the gas is defined as the force exerted by the particles on the walls of the container. It is expressed in various terms like 'mmHg', 'atm', 'kiloPascals' etc..
All these units of pressure are inter convertible.
Pressure of the gas = 4.59 mm Hg
760 mm Hg = 1 atm
4.59 mm Hg= 1/760 x 4.59 = 6.04 x 10^-3atm
The pressure in atm is 6.04 x 10^-3
salat tarawih itu boleh dilakukan di masjis
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
finally found
31th July 2000
How many atoms can be found in 6.7 moles of Bromine (Br)
Question 7 options:
4.03 x 10^24
9.13 x 10^-24
8.99 x 10^22
3.31 x 10^24
Answer:
The first one is correct, 4.03 x 10^24.
PLS HELP
A student takes some cold water in a beaker and dissolves two tablespoons of salt in it. When the student adds one more tablespoon of salt it gets settled at the bottom of the beaker. The student warms the water and observes that the salt disappears. What can be the reason for this observation?
Heat increases the solubility of water
Heat evaporates the excess salt in solution
After heating the solution become saturated
Two table spoon of salt makes the solution unsaturated
Answer:
A
Explanation:
The mass of the Atom is determined mainly by the
a) mass of the neutrons
b) mass of the neutrons and protons
c) mass of the electrons
d) mass of the electrons and neutrons
Answer:
B.mass of the neutrons and protons
Explanation:
hope it's help..
help " anyone" plz ....
Answer:
letter A. i hope this is correct answer
What structural formula represents 4 electrons shared between two atoms?
O 0=0
O Sg
ONEN
OP4
Question 1 (1 point)
A party balloon is filled up under the following conditions: 1.1 atm 65°C, 1,55 liters. Then, the balloon is taken to an outdoor wedding with
sightly different conditions: 1.2 atm and 92°C. What is the new size of the balloon?
Do not enter a unit, just the number
Round your answer to 2 sig figs.
Answer:
.5
Explanation:
Answer:
1.5
Explanation:
1.5
plsss helpp ASAP
BRAINLIEST
Answer:
Specific heat is defined by the amount of heat needed to raise the temperature of 1 gram of a substance 1 degree Celsius (°C). Water has a high specific heat capacity which we'll refer to as simply "heat capacity", meaning it takes more energy to increase the temperature of water compared to other substances.
Explanation:
Why do we feel the heat from the sun even though it is far away from Earth?
O The sun is farther away from Earth than any other star.
The sun is closer to Earth than any other star.
O The sun is the largest star.
O The sun is the brightest star.
Answer:
B.) The sun is closer to Earth than any other star.
periodic table
fill in the box :)
Answer:
I took a screen shot of your image, and wrote on top of it!
Explanation:
Hope this helps! :)
A salesman traveled at an average speed of 75 km/h for 2 hours. How far did he travel?
Answer: 150 km
Explanation:
75 × 2 = 150 km
Answer:
74km per hour can be put in fraction form, 75 (km)/ 1 hour
We need to know how man miles in 2 hours so our fraction will be x (km)/ 2 hours
75/1 = x/2
x= 150 km
Explanation:
All of the following are empirical formulas EXCEPT
a) Fe(OH)3
b) Na2SO4
c) N204
d) Sn3(PO4)2
If the mass of an object is 20 kg and the acceleration is 5m/s2 . What is the force?
pleaseee help
Answer:
100 newtons
Explanation:
Using the force equation to solve;
F = m * a
F = 20 * 5
F = 100
What is the mass of 0.0071 moles of lead?
Answer: 1.47 g
Explanation:
207.2 g/mol × 0.0071 mol = 1.47 g
You can find the molar mass of lead, Pb, on the periodic table, 207.2 g/mol.
0.0071 moles lead = 1.47112 grams
PCl3(g) + Cl2(g) ↔ PCl5(g) + energy. Some PCl3 and Cl2 are mixed in a container at 200 oC and the system reaches equilibrium according to the equation above. Which of the following causes an increase in the number of moles of PCl5 present at equilibrium?
Answer: Chlorine Oxide
Explanation:
menciona tres ejemplos en los que un cálculo incorrecto en los en ingredientes indispensables para la elaboración de un producto traería consecuencias graves químicamente hablando
Explanation:
Cada producto o servicio, independientemente de su propósito, debe ser seguro de usar y desarrollado de acuerdo con los más altos estándares de calidad y seguridad.
Algunos ejemplos de cálculo incorrecto de ingredientes que tendrían graves consecuencias químicas podrían ser:
Medicamentos y vacunas: Este es quizás uno de los ejemplos que tendría las consecuencias más graves para las personas si hubiera un cálculo incorrecto de ingredientes, ya que la producción de medicamentos y vacunas es una industria que requiere la máxima calidad agregada debido a que se ocupa directamente de la salud y los errores de formulación pueden agravar la enfermedad y causar la muerte. Actualmente tenemos el ejemplo de la vacuna para el control de la pandemia, que antes de ser aprobada tuvo que someterse a una serie de investigaciones, pruebas en humanos y diferentes fases para demostrar su efectividad y no causar daño al organismo humano.
Cosméticos: Existen cosméticos de la industria de la belleza que tienen la función de prevenir el envejecimiento cutáneo, alisar el cabello, etc. Por tanto, un cálculo incorrecto de los ingredientes químicos también podría provocar daños irreversibles a la salud, como quemaduras en la piel, caída del cabello, alergias, cáncer, etc.
Alimentos: La industria alimentaria utiliza componentes químicos con el fin de conservar los productos y aumentar la vida útil, por lo que si se usan en cantidades mayores de las necesarias, dichos compuestos pueden causar enfermedades en las personas como intoxicación alimentaria, cáncer, gastritis, etc.
How many grams are there in 4.50 moles of Na2SO4?
What is the volume of 13.20 grams of N2 at STP?
Here...........................
Compound name for C3F8
Answer:
Perflutren
Explanation:
Perflutren is a fluorinated hydrocarbon and gaseous substance used as an imaging contrast agent.
is lemon juice a asid base or neutral?
plzz help mee
Answer:
Acid
Explanation:
The pH level is below 7
3. Given the Lewis electron-dot diagram:
H
H:C:H
I: 0:1
Which electrons are represented by all of the dots?
1) the carbon and hydrogen valence electrons
2) the carbon valence electrons, only
3) all of the carbon and hydrogen electrons
4) the hydrogen valence electrons, only
Answer:
1) the carbon and hydrogen valence electrons
Explanation:
The lewis dot diagram illustrates how electrons are arranged round atoms in a molecule. The dots represents the;
1) the carbon and hydrogen valence electrons
The lewis dot structure has been the representation of the valence electrons of carbon and hydrogen. Thus, option A is correct.
The lewis dot structure has been used for the determination of the bonding in the structure with the help of dots. The dots in the structure have been the representation of the electrons in the structure.
The given structure has consisted of the bonds between hydrogen and carbon. The given lewis dot structure has consisted of the 2 dots representing the two electrons i.e. one of hydrogen and one of carbon shared between the atoms.
Thus, the lewis dot structure has been the representation of the valence electrons of carbon and hydrogen. Thus, option A is correct.
For more information about the lewis dot structure, refer to the link:
https://brainly.com/question/4144781