Answer:
A. Two nonmetal atoms share electrons between them
General Formulas and Concepts:
Chem
Covalent Bonding: between 2 nonmetalsIonic Bonding: between a metal and a nonmetalMetallic Bonding: between 2 metalsExplanation:
Covalent bonds are the ones between 2 nonmetal elements. Covalent bonding has 2 subcategories: Nonpolar Covalent and Polar Covalent.
state the law of conservation of energy
Answer:
In physics and chemistry, the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time. ... For instance, chemical energy is converted to kinetic energy when a stick of dynamite explodes.
The diagram below shows four sound waves.
m А.
Wave 1
Wave 2
Wave 3
Wave 4
Which of these shows the waves in the increasing order of their frequencies? (3 points)
Оа
Wave 1, Wave 4, Wave 3, Wave 2
Oь
Wave 2, Wave 1, Wave 3, Wave 4
Ос
Wave 3, Wave 4, Wave 1, Wave 2
Od
Wave 4, Wave 3, Wave 1, Wave 2
Answer: D (Wave 4, Wave 3, Wave 1, Wave 2)
The arrangement of these waves in order of increasing frequency is;Wave 4, Wave 3, Wave 1, Wave 2.
What is a wave?A wave is a disturbance along a medium that transfers energy. We have to note that waves are shown in the manner that is depicted by the images shown in the question.
Now, the arrangement of these waves in order of increasing frequency is;Wave 4, Wave 3, Wave 1, Wave 2.
Learn more about waves:https://brainly.com/question/16263433
#SPJ2
What will happen if we increase the friction on a roller coaster?
A. The speed of the roller coaster will increase.
B. The speed of the roller coaster will decrease
C. The speed of the roller coaster will remain constant.
D. The roller coaster will fly away
Answer: B. The speed will decrease.
Explanation:
When you ride a roller coaster, the wheels rub/scrape the rails, creating heat as a result of friction. And friction will slow you down. So increasing the friction on a roller coaster would slow it down.
Answer:
B
Explanation:
Friction opposes motion therefore reducing motion
10. A boat traveling at 9.5 m/s reduces its acceleration at a rate of 2.5 m/s2. What is the final speed of the boat
after it travels 12 meters?
Answer:
6.75m/s
Explanation:
using the second equation of motion, the time is calculated.
and with the formula a= (v - u)/t
where a is acceleration but in this case it's deceleration (and should be negated as you solve it ) .
v is final velocity
u is initial velocity
t is time taken
What is the form of energy that our eyes can detect?
A. Sound Energy
B. Chemical Energy
C. Light Energy
D. Thermal Energy
Answer: C. Light energy.
Explanation:
If the density of water is 1000 kg/m², what is the pressure at the bottom of a swimming pool 2m
deep when it is full of water?
The pressure at the bottom when the given tank is full of water will be 19600 Pa.
Pressure can be calculated by the formula,
[tex]\bold {P = \rho h g}[/tex]
Where,
P- pressure = ?
[tex]\bold {\rho}[/tex] - density of water = 1000 kg/m²
h - height of water = 2 m
g - gravity acceleration = 9.8 m/s
Put the values in the formula
[tex]\bold {P = 2 \times 1000 \times 9.8} \\\\\bold {P = 19600\ Pa}[/tex]
Therefore, the pressure at the bottom when the given tank is full of water will be 19600 Pa.
To know more about pressure,
https://brainly.com/question/23603188
Cellular respiration takes place in the mitochondria of cells.
Answer:
True
Because mitochondria is the powerhouse of the cell.
Explanation:
Hope this helps you
Answer:
True
Explanation:
The diagram below shows the velocity vectors for two cars that are moving relative to each other.
From the frame of reference of car 1, what is the velocity of car 2?
Answer:
The answer is "[tex]5 \ \frac{m}{s} \ west[/tex]"
Explanation:
[tex]\to \vec{V_1} = (25 \frac{m}{s}) (\hat{-i})\\\\\to \vec{V_2} = (20 \frac{m}{s}) (\hat{-i})\\\\[/tex]
velocity of car | respect to car :
[tex]\to \vec{V_{12}} = \vec{V_1} - \vec{V_2}\\\\[/tex]
[tex]=\vec{-25} \hat{i}+ \vec{20} \hat{i}\\\\= 5 \ \frac{m}{s} \ west[/tex]
Answer:
70 m/s east
Explanation:
if 8000cm3 of liquid drains off an hour glass in one hour, what is the flow rate of water from the clock
Answer:
8000cm³/hr
Explanation:
Given parameters:
Volume of the liquid draining off per hour = 8000cm³
Time taken to drain off = 1hr
Unknown:
Flow rate = ?
Solution:
Flow rate is the volume of fluid that passes per unit of time.
Flow rate = [tex]\frac{volume of fluid}{time taken}[/tex]
Flow rate = [tex]\frac{8000cm^{3} }{1hr}[/tex]
Flow rate = 8000cm³/hr
what are some advantages of gravitational energy
Answer:
Explanation: Gravity keeps our bones and bodily muscles from not working, things like dams can be one example of gravitational energy being used for our benefits. Without gravitational energy, our earth most likely won't stay in it's own atmosphere. Another example is like a car on the top of the hill, or a snow pack (Where an avalanche might happen)
PLEASE help!!
"A gas has an initial pressure of 296 atm, is now at 1246 atm (final pressure) and a final volume of 72 L, what is the initial volume of this gas?"
Answer:
in which standard you are, i am typing your answer till please reply.
It will take 3000 Joules of energy to push a large moving box up a ramp and into the back of a truck in 10 mins. If the length of the ramp is 15 meters, how much force will be required to accomplish this task?(include the units)
Answer:84
Explanation:
To solve this we must be knowing each and every concept related to force. Therefore, 200N is the force that will be required to accomplish this task.
What is force?When applied, force is described as an external source that alters or tends to modify the condition of the body. If indeed the body is moving this should come to rest, but if it is at rest, it will move. It can also induce changes in the body's orientation, form, size, and so on.
One example is pushing or shoving a door with force. Vector quantity, which means it has a magnitude as well as a direction. Newton's second law states that force is defined as the "product of such a body's acceleration and mass.
energy = 3000 Joules
time=10 mins
length = 15 meters
work= energy=force ×length
force ×15= 3000
force =200N
Therefore, 200N is the force that will be required to accomplish this task.
To know more about force, here:
https://brainly.com/question/13014979
#SPJ2
What is the effect on the current in a simple circuit when both the voltage and the resistance are halved?
Answer:
It doesn't change. It stays the same.
I hopes this helped you and if it did I'm glad I helped someone!!!
Explanation:
What, exactly, is moving across the medium?
Answer:
So waves are everywhere. But what makes a wave a wave? What characteristics, properties, or behaviors are shared by the phenomena that we typically characterize as being a wave? How can waves be described in a manner that allows us to understand their basic nature and qualities?
A wave can be described as a disturbance that travels through a medium from one location to another location. Consider a slinky wave as an example of a wave. When the slinky is stretched from end to end and is held at rest, it assumes a natural position known as the equilibrium or rest position. The coils of the slinky naturally assume this position, spaced equally far apart. To introduce a wave into the slinky, the first particle is displaced or moved from its equilibrium or rest position. The particle might be moved upwards or downwards, forwards or backwards; but once moved, it is returned to its original equilibrium or rest position. The act of moving the first coil of the slinky in a given direction and then returning it to its equilibrium position creates a disturbance in the slinky. We can then observe this disturbance moving through the slinky from one end to the other. If the first coil of the slinky is given a single back-and-forth vibration, then we call the observed motion of the disturbance through the slinky a slinky pulse. A pulse is a single disturbance moving through a medium from one location to another location. However, if the first coil of the slinky is continuously and periodically vibrated in a back-and-forth manner, we would observe a repeating disturbance moving within the slinky that endures over some prolonged period of time. The repeating and periodic disturbance that moves through a medium from one location to another is referred to as a wave.
Hope That Helps!!
Explanation:
In which image below is the angle of refraction the greatest?
Answer:
Explanation:
Angle of refraction is the angle made by refracted ray with the normal at the point of incidence . In this figure , refracted ray has been shown by line having arrow-head . Normal has been shown by broken line .
We observe that in figure D , angle made by refracted ray with normal is greatest . So figure D is the answer.
The image where the angle of refraction is the greatest is the image D
What is the angle of refraction?The angle of refraction is the angle that the refracted ray made with the x-axis.
The higher the angle between the refracted ray and the x-axis, the higher the angle of refraction and vice versa.
From the given diagram, we can see that the image where the angle of refraction is the greatest is the image D
Learn more on angle of refraction here: https://brainly.com/question/15838784
1.A runner has a displacement of 20 meters in 5 seconds, what is his velocity
during this time?
Answer:
The required velocity of runner is 4m/s.
A group of athletes are trying to turn a large wheel and axle to move a stone. What can they do to move the wheel with less effort?
For a straight line on a position-time graph, the slope of the line represents:
Group of answer choices
velocity
displacement
acceleration
distance
Diffraction occurs when waves _______ around the edge of a barrier?
Answer:
travels
Explanation:
hope this helps and have a blessed day
What is the difference between physical & chemical changes?
Slate whether each is an example of a Physleat (P) or Chemteal (C) property
1. Arock's density
2. boiling point of Gatorade
3. ability of an old car to rust
4. red color of a pe apple
S ability of wood to ignite
8. bitler taste of a lemon
7. melting point of wax
8. hardness of marble
9. Luster (shininess) of gold
boiling point Gatoride
with what force will the a car hit a tree if the car has a mass of 3,000 kg and a acceleration of 2m/s^2
Answer:
The answer is 6000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 3000 × 2
We have the final answer as
6000 NHope this helps you
A robot probe drops a camera off the rim of a 239 m high cliff on Mars, where the free-fall acceleration is -3.7 m/s^2. Find the velocity with which the camera hits the ground.
Answer:
42.05 m/s
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 0 m/s
Height (h) = 239 m
Acceleration due to gravity (g) = 3.7 m/s²
Final velocity (v) =?
The velocity with which the camera hits the ground can be obtained as follow:
v² = u² + 2gh
v² = 0² + 2 × 3.7 × 239
v² = 0 + 1768.6
v² = 1768.6
Take the square root of both side
v = √(1768.6)
v = 42.05 m/s
Therefore, the velocity with which the camera hits the ground is 42.05 m/s
Describe Kinetic Energy.
А
train moves with
uniform velocity of 36km/h
for 1os, calculate
total distance travelled
travelled
Explanation:
Distance is the product of speed and time:
Distance is the product of speed and time:[math]36 \frac{km}{h[/math]} ×5seconds
Distance is the product of speed and time:[math]36 \frac{km}{h[/math]} ×5seconds = 180km3600seconds×seconds = 1803600 km
Distance is the product of speed and time:[math]36 \frac{km}{h[/math]} ×5seconds = 180km3600seconds×seconds = 1803600 km= 0.05 km
Distance is the product of speed and time:[math]36 \frac{km}{h[/math]} ×5seconds = 180km3600seconds×seconds = 1803600 km= 0.05 km= 20 m
Hope u this answer cleared ur doubt
List and describe the 5 health reaped components of fitness.
Answer:
(1) body composition, (2) flexibility, (3) muscular strength, (4) muscular endurance, and (5) cardiorespiratory endurance.
Max, who has a mass of 80 kg and his girlfriend, Allison, who has a mass
of 50 kg are wearing skates and are standing together on a frozen lake. If
they push apart and Max has a velocity of 0.72 m/s in the south direction,
then what is the velocity of Allison? (Neglect friction)
Answer:
I don't know but focus on that she ways less so she will have a higher velocity
If mass of the ball is 5kg how to calculate the potential energy?!
The mass of the ball is 5 kg and it is lifted 10 meters above the ground, its potential energy is 490 Joules.
What is Potential Energy?
Potential energy is the energy that an object possesses due to its position or condition. It is the energy that an object has stored within itself, ready to be converted into other forms of energy.
To calculate the potential energy of an object, we need to know its mass, the acceleration due to gravity, and its height above a reference point. The formula for potential energy is:
Potential Energy = Mass x Gravity x Height
where:
Mass is the mass of the object, in kilograms (kg)
Gravity is the acceleration due to gravity, which is approximately 9.8 m/s^2 on Earth
Height is the height of the object above a reference point, in meters (m)
If the mass of the ball is 5 kg, we can calculate its potential energy if we know its height above a reference point. For example, if the ball is lifted 10 meters above the ground, we can calculate its potential energy as:
Potential Energy = 5 kg x 9.8 m/s^2 x 10 m
Potential Energy = 490 Joules
Learn more about Potential Energy from the given link
https://brainly.com/question/24933254
#SPJ1
6. A total of 135 J of work is done on a gaseous refrigerant as it undergoes compression. If
the internal energy of the gas increases by 114 J during the process, what is the total amount
of energy transferred as heat? Has energy been added to or removed from the refrigerant as
heat?
Answer:
Eh = 21 [J]
Removed as heat.
Explanation:
This is a case of energy conservation, we have to take into account the energies that go in and out of the system. In this case, 135 [J] of energy are entered in the form of work of the compressor to the chamber where the refrigerant is compressed, now of these 135 [J] 114 [J] were used as internal energy, this internal energy is used to increase the pressure and temperature of the refrigerant.
In this way the rest of the energy of the 135 [J] was lost in the form of heat to determine this loss of energy, we simply perform the arithmetic subtraction.
Eh = 135 - 114 = 21 [J]
Eh = 21 [J]
What is a super dense gravitationally collapsed mass from which no light
can escape called?
1) neutron star
2) pulsar
3) supernova
4) black hole
helppppppppppppppppp
Answer:
Burning of paper
Explanation:
Because new substance is formed