Answer:
The energy needed to split an atom into separate protons, neutrons, and electrons
Explanation:
The equation E = MC^2 is developed by Einstein’s Special Relativity Theory
where,
E = Energy
M = mass
C = speed of the light
The energy should be measured in Joules i.e J
The mass should be measured in Kilogram i.e Kg
And, the speed of the light should be measured in meters per second i.e ms-1
The C should be squared
Now the energy is required to divided into three particles i.e protons, electrons and neutrons
It also needs to allocate the nucleus into distinct protons and neutrons that we called binding energy of nuclear
And if the energy is required to take off an electron from an atom we called the energy of ionization
And if the energy is required to add an electron to an atom so we called it affinity of electron
Why are the oxidation and reduction half-reactions separated in an
electrochemical cell?
Answer:
Electrochemical cells typically consist of two half-cells. The half-cells separate the oxidation half-reaction from the reduction half-reaction and make it possible for current to flow through an external wire.
Explanation:
How many significant figures are there in 6.07x10^-15?
Answer:
3
Explanation:
6.07 has 3 digits and all are significant
The volume of a sample of pure HCl gas was 221 mL at 20°C and 111 mmHg. It was completely dissolved in about 50 mL of water and titrated with an NaOH solution; 18.7 mL of the NaOH solution was required to neutralize the HCl. Calculate the molarity of the NaOH solution.
Answer:
[tex]molarity =6.9\times 10^{-3}\ M\\[/tex]
Explanation:
We know that , the reaction of HCl and NaOH is given as follows
[tex]NaOH+HCl=NaCl +H_2O[/tex]
Given that
Pressure = 111 mm Hg
[tex]P=111\times 13.6\times 10^{-3}\times 9.81\times 1000=14.809\ kPa[/tex]
Temperature = 20°C
T=20+273=293 K
Volume= 221 m L
V=0.221 L
Number of moles of HCl is given as follows
[tex]n=\dfrac{P\times V}{R\times T}\\n=\dfrac{0.148\times 0.221}{0.821\times 293}=1.3\times 10^{-4}\ moles[/tex]
From the above reaction we can say that
Number of moles of HCl=Number of moles of NaOH
Volume of NaoH is given as follows
V=18.7 = 0.0187 L
Therefore molarity
[tex]molarity =\dfrac{n}{V_{NaOH}}\\molarity =\dfrac{1.3\times 10^{-4}}{0.0187}=6.9\times 10^{-3}\ M\\molarity =6.9\times 10^{-3}\ M\\[/tex]
Si el elemento "X" tiene 8 protones y el elemento "Y" tiene 11 protones, al reaccionar ¿Qué tipo de enlace pueden formar? Seleccione una: a. Metálico. b. Covalente puro. c. Covalente polar. d. Iónico.
Answer:
D; Iónico
Explanation:
El elemento con 8 protones es oxígeno, mientras que el elemento con 11 protones es sodio.
El sodio es un metal alcalinotérreo, mientras que el oxígeno no es un metal.
En general, cuando tenemos un elemento metálico como el sodio, que se une con uno no metálico como el oxígeno, el tipo de enlace formado como resultado de la transferencia completa de electrones desde la capa de valencia del sodio a la capa de valencia del oxígeno para completar su propia configuración de octeto se denomina enlace electrovalente o, más generalmente, enlace iónico
A. If both Assertion & Reason are true and the reason is the correct explanation of the assertion. B. If both Assertion & Reason are true but the reason is not the correct explanation of the assertion. C. If Assertion is true statement but Reason is false. D. If Assertion is false and Reason is true Assertion: .Formation of soluble products from insoluble ones is called precipitation. Reason : Precipitation involves formation of insoluble products from soluble ones
Answer:
D- Assertion is false and Reason is true
Explanation:
Precipitation is said to have occurred when an insoluble product is formed from soluble ones. Let us take an instance;
BaCl2(aq) + H2SO4(aq) -------> BaSO4(s) + 2HCl(aq)
The barium sulphate so formed is an insoluble product obtained from the reaction of soluble barium chloride and sulphuric acid. This is a typical example of a double replacement reaction as the both ions exchanged partners.
Thus, the assertion is false but the reason is true.
Volume occupied 3.52x10^32 moluchles
of Mathane (CH4)
1) At STP
Answer:
volume = 13097674418.528dm³
Explanation:
n = (3.52)*10^32/(6.02)*10^23)
n = (584717607.97)
n = volume /molar volume
molar volume at stp = 22.4dm³
volume= 584717607.97 x 22.4
volume = 13097674418.528dm³
Q1. Because metals are malleable, we use some of them to make saucepans. Give two other examples of uses of metals that depend on: (a):their malleability. (b):their ductility. (c):their ability to conduct electricity. [3]
Explanation:
(a):their malleability:
>iron making. iron worker heat the meat and hammer it to give them the desired shape.
> in the jewelry making process, like the gold or silver you wear are results due to the malleability of metal
(b):their ductility:
>for the making of high tension cable that connects different cities for transferring of electricity.
>for making wire gauze
(c):their ability to conduct electricity:
>for lighting up your house with light bulbs
>for using cooking stoves
>to make refrigerator work.
Answer:
a)gold and silver-used to make jewellery
b)gold and copper(we draw them in wires easily because they are not brittle)
c)copper and iron(this is because both of them are metal and metaps are best conductors of electricity)
Explanation:
uses of copper- to make utensils
to make wires for circuits
uses of silver-to make jewellery
to make mirrors
malleability is the property of a meta in which the metal can be changed into different shapes.
Ductility-can be drawn into thin wires.
Matter is composed of exceedingly small particles called atoms. An atom is the
smallest unit of an element that can participate in a -------
Answer:
Matter is composed of exceedingly small particles called atoms. An atom is the
smallest unit of an element that can participate in a chemical reaction.
Answer:
Chemical reaction.
Explanation:
The reaction between hydrogen gas and chlorine gas produces hydrogen chloride according to the following equation: H2(g) + Cl2(g) → 2HCl(g). Using the following bond enthalpies(D) calculate the enthalpy of reaction. D(H-H) =436 kJ/mol; D(Cl-Cl) = 243 kJ/mol D(H-Cl) = 432 kJ/mol
Answer:
The enthalpy of reaction is -185 kJ
Explanation:
To get the reaction:
H₂(g) + Cl₂(g) → 2 HCl(g)
you must follow the following steps:
1) Reactive molecules must break their bonds to obtain their atoms.
H₂(g) → 2 H(g)
Cl₂(g) → 2 Cl(g)
Bond energy (or enthalpy) is the energy required to break one mole of bonds of a gaseous substance. In the case of diatomic molecules with a single bond, it corresponds to the energy necessary to dissociate 1 mole of said substance in the atoms that form it.
Whenever you want to break links you must supply energy, so the link enthalpy will have positive values; while when a mole of bonds is formed energy is released and the bond enthalpy of this process will be negative.
In this case you will then have:
H₂(g) → 2 H(g) ΔH=436 kJ/mol
Cl₂(g) → 2 Cl(g) ΔH=243 kJ/mol
So the total energy needed to break all the bonds is:
ΔH=1 mol*436 kJ/mol +1 mol* 243 kJ/mol= 679 kJ
2) The atoms that were obtained in the break of the bonds must be combined to obtain the product.
2 H (g) + 2 Cl (g) → 2 HCl (g)
Being the single bond energy for one mole of 431 kJ H-Cl bonds and considering that two moles of H-Cl bonds are formed, the ΔH is:
ΔH = -2 moles* (432 kJ/mol) = -864 kJ
As mentioned, when a mole of bonds is formed energy is released, the bond enthalpy of this process will be negative. So the formation of HCl is negative.
Hess's law states that the energy change in an overall chemical reaction is equal to the sum of the energy changes in the individual reactions comprising it. So:
ΔHtotal= -864 kJ + 679 kJ
ΔHtotal= -185 kJ
The enthalpy of reaction is -185 kJ
For reaction: 2 C + O2 --> 2 CO2 If 5.50 g C was reacted with enough O2, what would be the volume (in liter) of the CO2 generated at STP? (0 C and 1 atm)
Answer:
10.2 L of CO₂
Explanation:
Our reaction is:
2C + O₂ → 2CO₂
We convert the mass of C, to moles:
5.50 g / 12g/mol = 0.458 moles
Ratio is 2:2, so if 2 moles of C can produce 2 moles of CO₂ then 0.458 moles of C would produce 0.458 moles of gas.
By the Ideal Gases Law, we know that 1 mol of gas is contained in 22.4L, so:
0.458 mol . 22.4L / 1mol = 10.2 L
A container initially holds 5.67 x 10^-2 mol of propane and has a volume of V1. The volume of the container was increased by adding an additional 2.95 x 10^-2 mol if propane to the container, so that the container has a final volume of 1.93 L. If the temperature and pressure are constant, what was the initial volume of the container?
Answer:
Initial volume of the container (V1) = 1.27 L (Approx)
Explanation:
Given:
Number of mol (n1) = 5.67 x 10⁻²
Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²
New volume (V2) = 1.93 L
Find:
Initial volume of the container (V1)
Computation:
Using Avogadro's law
V1 / n1 = V2 / n2
V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²
V1 = 10.9431 / 8.62
Initial volume of the container (V1) = 1.2695
Initial volume of the container (V1) = 1.27 L (Approx)
Answer: 1.27 L
Explanation:
First, calculate the final number of moles of propane (n2) in the container.
n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol
Rearrange Avogadro's law to solve for V1.
V1 = V2 × n1 / n2
Substitute the known values of n1, n2, and V2,
V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L
Which of the following elements does not lose an electron easily? NA F MG AL
Answer:
F
EXPLANATION
Among the given elements fluorine(F)can not lose electrons easily because of its high electron affinity, high nuclear charge and high electronegativity.
Answer:
F
Explanation:
it won't lose electron , rather it would gain electron to complete its octate......
Electronic Configuration of F = 2,7
So F will gain 1 electron ....
what is the relationship between ph and poh?
Answer:
pH and pOH denote the negative log of the concentration of hydrogen or hydroxide ions. High pH means that a solution is basic while high pOH means that a solution is acidic. ... So here the basic definition of pH is that it's equal to negative log base 10 of the concentration of protons in your solution.
pH and pOH are inversely proportional to one another i.e. as one increases, the other decreases and vice versa.
What is pH and pOH?pH and pOH are terms used to measure the level of acidity or alkalinity of a substance.
A basic solution has a pOH less than 7, while an acidic solution has a pOH greater than 7.
On the other hand, a basic solution has a pH greater than 7 while an acidic solution has a pH lesser than 7.
Therefore, it can be said that pH and pOH are related inversely i.e. as one decreases, the other increases.
Learn more about pH at: https://brainly.com/question/15289741
#SPJ9
unknown substance is heated from 10 celsius to 25 celsius, what happens at 17 Celsius
At 17 celsius ❤️
it will start to boil ❤️
#indian❤️
What would be the charge on an ion whose neutral atom has an electron configuration of 2.8.7?
O A. +7
OBO
C. +1
Answer:
–1
Explanation:
The electronic configuration of the neutral atom is given below:
2 8 7
From the electronic configuration of the neutral atom, we can see that the atom has 7 electrons in it's outermost shell. This implies that the element needs 1 more electron to complete it's octet configuration.
Therefore the charge on the ion of the element will be –1 indicating that the atom has received 1 electron to complete it's octet configuration.
Na-23 has 12 neutrons. What is it’s atomic number?
Answer:
11 Protons
Explanation:
Na-23 shows the mass of the element as 23. Therefore subtract 12 neutrons from the mass to get # of protons which is = to atomic #.
The atomic number of 23-Na is 11. It can be calculated from the number of protons present in the nucleus of an atom.
The atomic number is a fundamental property of an element and represents the number of protons found in the nucleus of an atom. It uniquely identifies each element on the periodic table. In a neutral atom, the atomic number also indicates the number of electrons present in the atom, as the number of protons and electrons in an atom are equal.
For example, hydrogen has an atomic number of 1, indicating that it has one proton in its nucleus. Oxygen has an atomic number of 8, indicating that it has eight protons in its nucleus.
The atomic number determines the element's position in the periodic table and provides important information about its properties and behavior.
Learn more about Atomic number, here:
https://brainly.com/question/16858932
#SPJ6
someone plz plz answer this hurry plz it
Answer:
b
Explanation:
What is the [tex]K_{c}[/tex] Expression for the following reaction [tex]C_{6}H_{12}O_{6} + O_{2} \ \ - \ \ \textgreater \ 6H_{2}O+6CO_{2}[/tex] NO ABSURD ANSWERS!
Answer:
[tex]\boxed{\mathrm{view \: explanation}}[/tex]
Explanation:
This is an irreversible reaction, we cannot derive any [tex]\mathrm{K_c}[/tex] expression for it. The [tex]\mathrm{K_c}[/tex] expression can only be derived for reversible reactions and not irreversible reactions. We cannot derive the [tex]\mathrm{K_c}[/tex] expression for this reaction.
Based on my previous question I have posted.. Answer this.. It's the continuation
Table 7.3 is different
Answer:
We don't know what solvent X and solvent Y are, but from the chart, we can see that in solvent X, hydrochloric acid can conduct electricity (bulb lights up), and react with calcium carbonate.
So, we can say the electrical conductivity when HCl is dissolved in solvent X is high, and when HCl is dissolved in solvent Y, the electrical conductivity is low (because light bulb doesn't light up).
Additionally, in solvent X, HCl ionizes, this shows the property of acids: reacts with carbonates to give CO2 (because CO2 reacts with lime water to make it cloudy).
In solvent Y, HCl does not ionize, so there is no reaction between acid and calcium carbonate.
Place the following substances in order of decreasing vapor pressure at a given temperature: BeF2, CH3OH, OF2?
(a) OF2 > BeF2 > CH3OH
(b) BeF2 > OF2 > CH3OH
(c) BeF2 > CH3OH > OF2
(d) CH3OH > OF2 > BeF2
(e) OF2 > CH3OH > BeF2
Answer:
(b) BeF2 > OF2 > CH3OH
Explanation:
The degree and type of intermolecular forces present in a substance influences its vapour pressure considerably. The greater the magnitude and strength of intermolecular forces in the substance, the lower the vapour pressure of the substance.
BeF2 molecules are held together by weak vanderwaals forces hence BeF2 will exhibit the least degree of intermolecular interaction and have the highest vapour pressure. OF2 molecules are bound together by dipole interactions hence it will exhibit a lower vapour pressure compared to BeF2. CH3OH molecules form hydrogen bonds with water molecules hence it will exhibit the least vapour pressure among the trio.
Who is john Dalton ?
Answer:
He is a English chemist physicist and meteorologist. He is best known for the atomic theory
Answer:
John Dalton was a scientist.
Explanation:
Help ya girl out plz
Answer:
The correct option is B
Explanation:
just did it edg 2020.
Answer:
the answer is c
Explanation:
Which event is most likely occurring? diffusion because particles move from regions of high concentration to regions of low concentration diffusion because particles move from regions of low concentration to regions of high concentration effusion because there is a movement of a gas through a small opening into a larger volume effusion because there is a movement of a gas through a large opening into a smaller volume
Answer: c
Explanation: effusion because there is a movement of a gas through a small opening into a larger volume
pls help...
You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. What step do you need to take next? A. Add ethanol B. Add restriction enzymes C. Add minisatellites D. Add radioactive probes
Add minisatellites. Hence, option C is correct.
What is Electrophoresis?Electrophoresis is a laboratory technique used to separate DNA, RNA or protein molecules based on their size and electrical charge.
You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. you need to add minisatellites.
Hence, option C is correct.
Learn more about Electrophoresis here:
https://brainly.com/question/13949940
#SPJ2
How many atoms are in 10g of Al
Answer:
2.22 x 10²³
Explanation:
number of atoms = mole x 6 x 10²³first we have to find number of moles
moles = mass(g) / molar mass (Mr) (g/mol)mol = 10/27
mol= 0.37 mol
Now,
number of atoms = mole x 6 x 10²³
= 0.37 x 6 x 10²³
= 2.22 x 10²³
what is the smallest particle which prossesses the properties of a compound called?
Answer:
Molecule
Explanation:
Compounds are chemical substances comprising of two or more elements. The smallest particle contained in a compound is the MOLECULE. Molecules are combinations of atoms (same or different) of an element held together by a chemical bond.
Since a compound is a molecule with two or more elements combined, the chemistry of the molecules contained in a compound determines its chemical properties. This means that the molecules of a compound are responsible for the interactions of a compound in a chemical reaction. Examples of molecules are H2O, N2, O3 etc.
A substance contains 23.0 g sodium, 27.0 g aluminum, and 114 g fluorine. How many grams of sodium are there in a 102-g sample of the substance? Select one: a. 4.43 g b. 23.0 g c. 14.3 g d. 102 g e. None of these
Answer:
E. None of the above
Explanation:
What is the concentration of a solution if 65 g of sugar is dissolved into 200 ml of water?
Answer: the concentration in g/L 325 while in molarity is 0.6398(M).
Answer:
325 g/L,
0.9503 M
Explanation:
65 g sugar --- 0.2 L
x g --- 1 L
x = 65/0.2 g/L = 325 g/L
Sugar(sucrose) is C12H22O11.
Molar mass (C12H22O11) = 12*12 + 1*22 + 16*11 = 342 g/mol
325 g/L * 1 mol/342 g = 0.9503 mol/L = 0.9503 M
Answer 0.6398(M) is not related to sugar (sucrose),
it should be given formula or molar mass of sugar if it is different than sucrose.
A container initially holds 5.67 x 10^10-2 mol of propane and has a volume of V1. The volume of the container was increased by adding an additional 2.95 x 10^-2 mol of propane to the container, so that the container has a final volume of 1.93 L. If the temperature and pressure are constant, what was the initial volume of the container ,V1?
Answer:
The initial volume of the container was 1.27L
Explanation:
Avogadro's law states that under the same pressure and temperature, equal moles of gases occupies equal volume. The equation is:
V₁n₂ = V₂n₁
Where V is volume and n moles of 1, initial state and 2, final state.
In the problem, initial moles are 5.67x10⁻², final moles after the addition are:
5.67x10⁻² + 2.95x10⁻² = 8.62x10⁻² moles
And, after the addition, the volume is 1.93L.
Replacing in Avogadro's law:
V₁×8.62x10⁻² moles = 1.93L×5.67x10⁻² moles
V₁ = 1.27L
The initial volume of the container was 1.27LHow can the rate constant be determined from the rate law
Answer: The rate constant is the reaction rate divided by the concentration terms.