which property of a sound wave is related to the pitch of the sound?

Answers

Answer 1

Answer:

Frequency

Explanation:

I do not see the options but I know the answer:

The frequency of a sound wave is what your ear understands as pitch. A higher frequency sound has a higher pitch, and a lower frequency sound has a lower pitch.

If you find my answer helpful

Pls consider marking my answer as Brainliest! It would mean a lot!

Answer 2

Answer:

frequency

Explanation:

vaild


Related Questions

Which further observation led Mendeleev to create the periodic table

Answers

Answer:

Mendeleev realized that the physical and chemical properties of elements were related to their atomic mass in a 'periodic' way, and arranged them so that groups of elements with similar properties fell into vertical columns in his table.

Explanation:

google

Convert 122 moles of Methane to liters?

Answers

122 moles of Methane to liters is 2734.5

What would happen if there were 3 protons and 0 neutrons in the nucleus of an atom?

Answers

Answer:

the atom will be positife atom

When calculating percent error, the accepted value is in the denominator
True or false

Answers

Answer:

True

Explanation:

The answer is TRUE

Have a nice day / night! :)

Which isotope of sulfur is the most naturally abundant

Answers

Answer:

The Isotope of sulfur.  

32S 94.99% stable.

33S 0.75%   Stable.

Explanation:

What is wrong with the answer, 10.5 x 10^3? Think about the proper form used to show a number in scientific notation.

Answers

Answer:

1.05 × 10^4.

Explanation:

The proper scientific notation will be

1.05 × 10^4.

1. Collect data: Create two water cycles using the Gizmo. Each cycle should have at least four steps and should begin and end at the same location. Choose any starting point from the list on the right. When the cycle is complete, choose the PATH tab and write the steps below.

Answers

Answer:

Cycle 1: Lake,atmosphere, clouds,rain,lake

Cycle 2: Atmosphere, clouds, rain, ocean

1. Using a triple beam balance and a graduated cylinder, a student collected data on a sample of an
element:
Mass of sample - 67.9 g
Volume of water - 52.0 ml
Volume of water and sample - 28.0 ml
a) Calculate the density of the sample. Show all work and use significant figures and units.

Answers

Answer:

d = 2.8 g/mL

Explanation:

Given data:

Mass of sample = 67.9 g

Volume of water = 28.0 mL

Volume of water + sample = 52.0 mL

Density of sample = ?

Solution;

Density is equal to the mass of substance over volume of substance.

Formula:

d = m/v

d = density

m = mass

v= volume

Now we will calculate the volume of sample.

Volume of sample = (volume of water+ sample) - volume of water

Volume of sample = 52.0 mL - 28.0 mL

Volume of sample = 24.0 mL

Now we will calculate the density.

d =67.9 g /24.0 mL

d = 2.8 g/mL

8. Which word best describes the element in box number 2?
a а Brittle
b Gas
С Semiconductor
d. Shiny

Answers

Answer:

gas

Explanation:

i think it might be gas

How many neutrons make up one of these potassium atoms?

Answers

Potassium has twenty neutrons

Answer:

20

Explanation:

Elements in group to are cold alkaline earth metals what is most similar about alkaline earth metals how many protons and neutrons they have which Chemical properties he have how many total electrons they have which period They have most often found in

Answers

Answer:

explanations below

Explanation:

The alkaline earth metals are the 6 chemical elements that can be found in group two of the periodic table. These elements have a lot of properties in common, in the sense that they are generally shiny, reactive at standard temperature and pressure and they are also silvery-white. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra)

These metals have two electrons at their orbits, which can be easily lost to form cations (with charge +2, and an oxidation state of +2)  

Below are some of their details

Name: Beryllium  

Number of Protons/Electrons: 4  

Number of Neutrons: 5  

Name: Magnesium  

Number of Protons/Electrons: 12  

Number of Neutrons: 12  

Name: Calcium  

Number of Protons/Electrons: 20  

Number of Neutrons: 20  

Name: Strontium  

Number of Protons/Electrons: 38  

Number of Neutrons: 50  

Name: Barium  

Number of Protons/Electrons: 56  

Number of Neutrons: 81  

Name: Radium  

Number of Protons/Electrons: 88  

Number of Neutrons: 138  

what do you mean by international understanding peace

and cooperation​

Answers

Answer:

International understanding or internationalism is a feeling that the individual is a not only a member of his country, but a member of the world as well.  To ensure world peace.  To prevent world wars.  To promote human welfare. To promote mutual understanding and interdependence.

Where exactly is an orbital? I understand they are a volume where we expect to find electrons 90% of the time but I don't understand where their shapes are and fit on an atom, and the different forms of orbitals confuse me a little. Can someone explain me where they are with the help of an image? Pardon me if my question isn't very clear

Answers

Answer:

95% of the time (or any other percentage you choose), the electron will be found within a fairly easily defined region of space quite close to the nucleus. Such a region of space is called an orbital. You can think of an orbital as being the region of space in which the electron lives

What questions might remain that will one day be answered by new technology?

Answers

Answer:

Can we find a safe cure for cancer?

Explanation:

pls mark brainliest

cy sprints 100 meters in 13 seconds going south. what is his average velocity?

Answers

Answer:

Explanation:

This should be in physics.

d = 100 meters south

t = 13 seconds

v = d/t

v = 100 / 13

v = 7.69 m/s going south.

The point is that you have to specify the direction.

What do we call the molecule that forms when two atoms of the same element are covalently bonded to each other?

Answers

Answer:

Covalent Compounds and Diatomic Elements

Explanation: The two atoms that are held together by a covalent bond may be atoms of the same element or different elements. When atoms of different elements form covalent bonds, a new substance, called a covalent compound, results. Water is an example of a covalent compound.

Is steam a water , oxygen or hydrogen molecule ?

Answers

it’s a water molecule

Answer:

In thermolysis, water molecules split into their atomic components hydrogen and oxygen. For example, at 2200 °C about three percent of all H2O are dissociated into various combinations of hydrogen and oxygen atoms, mostly H, H2, O, O2, and OH.

Explanation:

Which description applies to a physical property? Choose the correct answer
O depends directly on the amount of the substance present
O examines changes in the composition and structure of matter
O measured or observed without changing the identity and composition of matter
O determined by changing the identity of a substance and observing how it reacts

Answers

Answer:

the third one, measured or observed without changing the identity and composition of matter. because physical property does not under go any change but can be put back.

What is the volume of kristas rock

Answers

Answer:

30

Explanation:

Measure the water rised in the beaker which is 180 and subtract 150 and you get 30

Radio waves are primarily used to

Answers

Answer:

Radio is used primarily for communications including voice, data and entertainment media.

Which helps in the production of eggs?

Answers

Answer:

Feed Consistency.

Explanation:

Feeding that is supposed to yield the volume of a gnome for our chickens to lay eggs.

The Boxes of Clean Nests.

The Areas Free.

With calcium.

Regularly check it.

Protection Coop.

About fresh water.

Controlling Parasites.

Answer:

A. testosterone

Explanation:

i took the unit test

GIVING 5 STARS AND BRAINLY IF YOU ANSWER FIRST AND CORRECTLY
Please answer asap. Thank you.

QUESTION:

How many total elements are involved in the process of photosynthesis?

A. 2
B. 3
C. 4
D. 5

Answers

3 there are three different chemical symbols on each side of the equation

A student observes that instant tea dissolves more rapidly in a cup of 250 mL of stirred hot water than in a cup of 250 mL of stirred cold water. Which is the most relevant hypothesis that the student could develop based on this observation?

A.
Volume affects the rate that instant tea dissolves in a solvent.
B.
Temperature affects the rate that instant tea dissolves in water.
C.
Stirring affects the rate that instant tea dissolves in water.
D.
Pressure affects the rate that instant tea dissolves in water.

Please answer my question!

Answers

Answer:

B

Explanation:

In this question, there is no mention of pressure, so we can eliminate answer D. In both cups, it mentions they contain 250 mL of water and both are stirred, so these would be constants. The only difference between the cups is temperature, so temperature must affect the rate that instant tea dissolves in water. Therefore the answer is B.

Dilute hydrochloric acid reacts with sodium

2HCl(aq) + Na2CO3(aq) + 2NaCl(aq) + H2O(l) + CO2(g)

A Explain why effervescence is seen during the reaction.

Answers

Answer:

Because the reaction releases CO2 gas

Explanation:

therefore creating an effervecence within the solution as the carbonate dissociates

One way to separate the different kinds of matter in a mixture is through


A. filteration
B. decomposition
C. electrolysis
D. chemical reactions

Answers

The answer is filtration (A).

Creating a mixture is a physical process; as such, the substances that make up a true mixture do not undergo any chemical reactions with one another. It follows, then, that to separate substances that are mixed together, the process to use would be physical, not chemical. Filtration fits that bill: Solutes that do not dissolve in the solvent can be trapped, for example, by a fine mesh whose openings are large enough for the solvent to pass through but too small for the undissolved solute(s) to do so.

Choices B, C, and D are all chemical processes.

Decomposition (B) is the breakdown of a substance into chemically distinct fragments. For example, hydrogen peroxide in a mixture (solution) with water decomposes in the presence of an appropriate catalyst—the products you are left with are water and oxygen gas, which bubbles out of the mixture. But you haven’t separated the hydrogen peroxide from the water—through decomposition, the hydrogen peroxide molecules are broken up and the atoms rearranged to form different molecules. There’s no hydrogen peroxide left to separate anymore. So, decomposition doesn’t separate different substances in a mixture—it transforms them.

Electrolysis (C) is a chemical process that uses an electric current to drive the movement of charged particles (electrons and ions) through a conductive medium. Suffice it to say that this will almost certainly change the chemistry of a mixture. For example, assume you’ve got a mixture of some inert, insoluble solute in water. If you run a very strong electric current through water, you’ll end up decomposing the water molecules themselves into oxygen and hydrogen gases. Again, you haven’t technically separated the solute from the mixture because separation implies that you have the separated substances still around. In this example, you’ve “separated” your solute by chemically transforming your solvent into two different gases; one part of your mixture no longer exists. (Side note: electrolysis of pure water takes quite a bit of energy; on the other hand, tap water, which contains dissolved electrolytes, can be readily decomposed via electrolysis using the current delivered by a standard alkaline battery.)

As a rule of thumb, the suffix (–lysis) usually indicates chemical decomposition, and the stem that precedes the suffix usually indicates what the decomposition process involves. Examples include electrolysis (as we just discussed), hydrolysis (breaking a chemical bond using water), glycolysis (the biochemical process of breaking down glucose into smaller molecules to harness the energy released), and radiolysis (splitting a bond within atoms comprising a molecule using ionizing radiation).

Finally, as should be clear by this point, chemical reactions are not the way to go about separating mixtures. Again, the chemical substances in a mixture retain their chemical identities. Separating the constituents of a mixture essentially entails isolating these substances. Filtration can and does isolate solutes from solvents without altering their chemical identities (assuming the filter itself is chemically inert). A chemical reaction changes a substances chemical identity, and so could not properly be regarded as a method of separation, and only separation.

One way to separate the different kinds of matter in a mixture is through filtration. The correct option is A.

What is filtration?

Filtration is a physical or mechanical process by which two or more substances are of different compositions. These substances can be solid, liquid, or gas.

There are three types of filtration. These are mechanical, chemical, and biological. The different types of filtration are based on a similar principle, which is a mixture of several types poured onto a filter membrane. A specific size of the pore is present in the filter membrane.

The other options are decomposition, which is a process of breaking down substances. Electrolysis is separating charged ions and chemical reactions to form compounds.

Thus, the correct option is A. filtration.

To learn more about filtration, refer to the link:

https://brainly.com/question/14530470

#SPJ6

You will learn in this course that organic compounds have covalent bonds with a significant amount of energy stored in them. This is why we burn fossil fuels to generate energy to heat our homes or drive our cars. Given this information, which of the compounds listed below would you expect to have the most energy is its carbon-carbon bond?

Answers

Answer:

See explanation

Explanation:

This question is obviously supposed to be a multiple choice question but the options are missing.

However, the question intends to test the student's knowledge about combustion of fossil fuels. Fossil fuels are mostly composed of hydrocarbons of different chain lengths.

The longer the chain length, the greater the energy released when the compound is burnt since there are more energy stored in its bonds.

Hence, the correct answer to this question will be the option that contains the greatest number of C-C and C-H bonds.

Please answer it correctly and explain clearly

Answers

Answer:

i think that the children will inherit the brown eyes, it is the best answer since the other things cant be inherited and he dyed his hair blonde

Explanation:

What is the last energy level of N? Mg?

Answers

Answer:

2

3

Explanation:

To infer the last energy of the given atoms, we need to write their electronic configuration:

For N = 1S² 2S² 2P³

     Mg  = 1S² 2S² 2P⁶ 3S²  

The energy levels are usually designated as;

   n = 1

   n = 2

   n = 3

   n =4

For N, the last energy level is 2

     Mg, the last energy level is 3

We can also determine this number by the periods the atoms can be found.

The density of a pure liquid at 25 degrees Celsius was calculated by determining the mass and volume of a sample of the liquid. A student measured the mass of a clean, dry 25.00 mL volumetric flask, filled the flask to its calibration mark with the liquid, and then measured the mass of the flask and liquid. The recorded measurements are shown in the table above. On the basis of this information, to how many significant figures should the density of the liquid be reported?

Answers

Answer

The density of the liquid is 0.82 g/mL.

Explanation:

From the question given above, the following data were obtained:

Mass of empty flask = 18.990 g

Mass of flask + liquid = 39.439 g

Volume of liquid = 25 mL

Density of liquid =..?

Next, we shall determine the mass of the liquid. This can be obtained as follow:

Mass of empty flask = 18.990 g

Mass of flask + liquid = 39.439 g

Mass of liquid =.?

Mass of liquid = (Mass of flask + liquid) – (Mass of empty flask)

Mass of liquid = 39.439 – 18.990

Mass of liquid = 20.503 g

Finally, we shall determine the density of the liquid as follow:

Mass of liquid = 20.503 g

Volume of liquid = 25 mL

Density of liquid =..?

Density = mass / volume

Density of liquid = 20.503 / 25

Density of liquid = 0.82 g/mL

What happens to an egg that is not fertilized?
OIt is reabsorbed by the body
O It travels back up the fallopian tube.
OIt exits during childbirth.
O It is released during menstruation​

Answers

Answer:

D.  It is released during menstruation

Explanation:

The egg that is not fertilized is  released during  the process of menstruation​.

What is menstruation?

Menstruation (also known as a period, among other colloquial terms) is the regular discharge of blood and mucosal tissue from the inner lining of the uterus through the vagina. The menstrual cycle is characterized by the rise and fall of hormones. Menstruation is triggered by falling progesterone levels and is a sign that pregnancy has not occurred.

The first period, a point in time known as menarche, usually begins between the ages of 12 and 15.Menstruation starting as young as 8 years would still be considered normal.The average age of the first period is generally later in the developing world, and earlier in the developed world. The typical length of time between the first day of one period and the first day of the next is 21 to 45 days in young women. In adults, the range is between 21 and 31 days with the average being 28 days.

Learn more about menstruation,here:

https://brainly.com/question/9864045

#SPJ7

Other Questions
Please help ASAP.Will mark brainliste Why are there ethical issues surrounding end-of-life care?because patients have the right to refuse end-of-life carebecause patients do not have the right tomake end-of-life decisionsbecause patients have the right to accept lifesupportbecause sometimes patients cannot makedecisions for themselves What does precise language mean? Provide examples. 0.05 is 1/10 value of what number What value of p makes this equation true? 3/4 p- 1/4p + 3 = -2 What does Emerson compare society to in the excerpt from Self-Reliance? PLEASE HELP QUICKLY: (FIRST ANSWER GETS BRAINLIEST) PERSONAL & FAMILY FINANCEManni wants to start a paper company. He needs to find a place where he can have access to lumber so he can create his products. Which category of economic resource does he require?laborentrepreneurial abilityland can you help me doing an essay about actual self The first industry to industrialize during the industrial revolution was the?*Textile Industry Car IndustryCosmetic industry Shoe Industry What is the difference between the Grand Council and the common house of assembly? Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.Online Content: Site 1What makes the outline method an effective note-taking technique? Help please all of the numbers b4 the equal sign are wrong Solve: 4 2(2x 7) = 6.A)6B)5C)3D)6 a lae is a body _ with land around us The idea that government must treat people fairly when it takes life, liberty, or property is part of your right to A.Due Process B.Eminent Domain C.Warrant-less Searches D.Grand Jury Create three words from the Latin root word "port." A chef places an open sack of flour on a kitchen scale. The scale reading of40 N indicates that the scale is exerting an upward force of 40 N on the sack. The magnitude of this force equals the magnitude of the force of Earths gravitational attraction on the sack. The chef then exerts an upward force of10 N on the bag and the scale reading falls to 30 N.Draw a free-body diagram of the latter situation. Reread paragraphs 9-10. What were the main causes of the narrator's bad behavior?bad boy anylizing lanuageg qution 25 POINTS!!!! I think of two numbers.When I add the numbers, the answer is 8.When I subtract the numbers, the answer Is less than 6.What can the numbers be?The two numbers can be _ and _ . expand (2a +36) (2a-3b