Answer:
I would say the best choice, would be Choice C.
For all of these scenarios a force is being applied to displace an object. But the displacement occur in the case of trying to push a car and pushing a child on a swing. Thus, options b and c are correct.
What is work done?Work done in physics is the dot product of force and displacement. Therefore, every work done is associated with a force but not all force result in work done. Those force, which result in a displacement will do work done.
Holding a heavy piece of wood does not make a displacement in the object. Similarly, when we hold the door to stop we just apply a force and not displacing the door. In both cases work done is zero.
When we push a car to make it move and any movement from the side of the car result in a work done. Similarly in when we push a child in a swing we make the swing move a distance by applying force. Thus work is being done on the object.
To find more on work done, refer here:
https://brainly.com/question/13662169
#SPJ5
Answer quick!!! (Edge 2021)
Haley noticed a small spot on her skin that turned out to be skin cancer. Which treatment is her doctor most likely to use?
A) Brachytherapy
B) Superficial external beam radiation therapy
C) Radiopharmaceuticals
D) High Intensity Focused Ultrasounds
The treatment most likely to use is Superficial External bean Radiation Therapy. Then the correct option is B.
What is the electromagnetic spectrum?The electromagnetic spectrum consists of the range of all types of EM radiation. Radiation is a packet of energy that travels and spreads out.
It has radio waves, infrared waves, visible light waves, ultraviolet rays, and microwaves.
They possess high energy even to penetrate deep within the material. the electromagnetic spectrum has a longer wavelength and less frequency.
Haley noticed a small spot on her skin that turned out to be skin cancer.
Surgery, radiation, chemotherapy, and hormone therapy can all be used to relieve signs and symptoms.
Medications may relieve symptoms such as pain and shortness of breath. Palliative treatment can be used.
The treatment most likely to use is Superficial External bean Radiation Therapy.
Then the correct option is B.
Learn more about the electromagnetic spectrum.
https://brainly.com/question/23727978
#SPJ5
The speed of an object in motion will _____ if the net force acting on it is opposite the direction that the object is moving.
Answer:
Decrease
Explanation:
What's the net fore and gravity
Answer:
Force = Mass x Acceleration. Since the acceleration of gravity is always constant at 9.81 m/s2, the force of gravity is constant as well, according to Newton. If the object is sitting motionless on the ground, then the net force (sum of all forces) acting on it is zero
Explanation:
sorry if it doesn't help
what is more reactive calcium or strontium?
Answer:
Calcium is less reactive than strontium.
hope it helps
Which of the following describes how cooling
systems transfer thermal energy?
a. Thermal energy naturally flows from cooler
areas to warmer areas.
b. Thermal energy naturally flows from warmer
areas to cooler areas.
c. Work is done to transfer thermal energy from
warmer areas to cooler areas.
d. Work is done to transfer thermal energy from
cooler areas to warmer areas.
What is the magnitude and direction (right or left) of the
net force acting on the box?
______ N to the _______
Answer:
12 N to the Right
Explanation:
12 N is the answer for the first box and right is the answer for the second box
Which is not a step in the scientific method?
a. Problem or question
b. Ask other people for their opinion
O c. Formulate a hypothesis
O d. Arrive At a conclusion
HURRY PLEASE
Answer:
Umm I'm pretty sure is all of the above
A bus as speed of 20m/s begin to slow at constant acceleration of 8.00m/s2 along a straight line find the average speed for the 5al.S interval
Answer:
the final velocity of the bus is -20 m/s.
Explanation:
Given;
initial velocity of the bus, u = 20 m/s
deceleration of the bus, -a = 8 m/s²
time of motion, t = 5 s
The final velocity of the bus is calculated as;
v = u + at
v = 20 + (-8 x 5)
v = 20 - 40
v = -20 m/s.
Therefore, the final velocity of the bus is -20 m/s.
High energy waves have what
Answer:
It means that the frequency will be a lot higher with a shorter wave.
6. Which of the following best describes the situation?
Answer:
D
Explanation:
the man is pull the box that is the force and the box rubbing against the ground causes friction
An unknown element has 5 protons, 5 electrons, and 6 neutrons what is the atomic mass of this element
Answer:
Atomic mass 5
Explanation:
No. protons=Atomic mass
Can someone help me please?
how to use a circuit breaker
?
Answer:
circuit breakers work in a similar way to fuses, and also protect the circuit from damage if too much current flows but work in a different way. when circuit breakers detect a surge in current in a circuit, they break the circuit by opening a switch. one type of circuit breaker used instead of a fuse and an earth wire is a Residual Current Circuit Breaker (RCCB)
How does a parallel circuit change when a branch is added? The total resistance increases, so the current in the circuit decreases. The total resistance decreases, so the current in the circuit increases. The total resistance increases, so bulbs shine at a lower brightness. The total resistance decreases, so bulbs shine at a higher brightness.
Answer:
i know i'm way late. i'm so sorry but the answer is b not c. i just took the test and got 90% this one is wrong. it's B
Explanation:
just took the test.
hope this helps!
have a good day/ night
When a branch is added to a parallel circuit, the total resistance decreases, so the current in the circuit increases.
What is meant by a parallel circuit ?A parallel circuit is defined as the type of circuit in which the resistors are connected in parallel such that the current flowing through each of them is different.
Here,
The given circuit is connected in parallel combination of resistors. The current has different pathways to flow through. The voltage applied across each resistors will be the same.
Consider a parallel resistance circuit having a combination of n number of resistors with resistance R. The effective resistance of the parallel circuit can be given as,
1/Reff = 1/R₁ + 1/R₂ + 1/R₃ +....1/Rₙ
Since, the resistance is same on all resistors, we can write,
Reff = R/n
So, when adding a branch, the number of resistors, n increases. As a result, the effective resistance of the circuit decreases.
According to Ohm's law, as the resistance of a circuit decreases, the flow of current through the circuit increases.
Hence,
When a branch is added to a parallel circuit, the total resistance decreases, so the current in the circuit increases.
To learn more about parallel circuit, click:
https://brainly.com/question/4069479
#SPJ7
The smallest bird is the Cuban bee hummingbird, which has a mass of only 1.7 g. If this bird did 8.8 10 –4J of work by exerting an upward force of 3.4 10 –4 N, how far did it fly?
Answer:
The distance the bird flew is approximately 2.59 meters
Explanation:
We list out the parameters in the question, and the required measurement as follows;
The mass of the Cuban bee hummingbird, m = 1.7 g = 0.0017 kg
The amount of work the bird does, W = 8.8 × 10⁻⁴ J
The amount of upward force the bird exerts, F = 3.4 × 10⁻⁴ N
Let 'd' represent the distance flown by the bird
(The downward force, [tex]F_g[/tex] = The weight of the bird, W
W = The mass of the bird, m × The acceleration due to gravity, g
The acceleration due to gravity, g ≈ 9.81 × 10 m/s²
∴ [tex]F_g[/tex] ≈ 0.0017 kg × 9.81 m/s² = 0.016677 N > F)
Given that the weight of the bird is larger than 'F', we assume that the force exerted by the bird is the net force, [tex]F_{NET}[/tex] = F
Therefore;
Work done, W = Net Force, [tex]F_{NET}[/tex] × Distance, d
∴ W = [tex]F_{NET}[/tex] × d
d = W/[tex]F_{NET}[/tex] = 8.8 × 10⁻⁴ J/(3.4 × 10⁻⁴ N) = 2.58823529 meters
The distance the bird flew, d ≈ 2.59 m.
1.Two materials that can be scratched by an iron mail are ___, ___
2.What is the substance that can be scratched by an iron nail but not a penny?
Please answer
Answer:
1. Two materials that can be scratched by an iron nail are zinc and aluminum
2. A substance that can be scratched by an iron nail but not a penny is;
Nickel
Explanation:
The hardness of a material can be defined as its ability to resist being plastically deformed at a location due to mechanical scratching, abrasion or indentation
The Mohs hardness scale provides a ranking of materials in the order of hardness with a material having a higher Mohs hardness number being able to scratch other materials which have a lower Mohs hardness number
1. From the Mohs scale of hardness, iron which has an harness number of 4.5 can scratch zinc which has an harness number of 2.5, and iron can also scratch aluminum which has an hardness number of 2.5 to 3
2. A penny is made from copper plated material and will have an outer layer hardness of copper which has an hardness number of 3 on the Mohs scale
Therefore, a penny cannot scratch a material mode of nickel which has an hardness number of 4, while iron which has an hardness of 4.5 will scratch a nickel material
(1) Zinc and aluminum can be scratched by an iron nail.
(2) Nickel can be scratched by an iron nail but not a penny.
Hardness and deformation:The hardness of a material is defined as its ability to resist deformation due to mechanical scratching, abrasion, or indentation.
According to the Mohs hardness scale, a material having a higher Mohs hardness number is able to scratch other materials which have a lower Mohs hardness number.
From the Mohs scale of hardness, iron has a hardness number of 4.5, zinc has a hardness number of 2.5, and aluminum which has a hardness number between 2.5 to 3. So, iron can scratch both, Zinc and Aluminium.
A penny is made from copper-plated material copper has a hardness number of 3 on the Mohs scale. Whereas Nickel has a hardness number of 4. Therefore, a penny cannot scratch a material made of Nickel.
Learn more about hardness:
https://brainly.com/question/13409009?referrer=searchResults
In a head on collision, if you aren’t wearing your seatbelt you could go through the window. What Law is being applied?
Answer:
inertia
..............
Answer:law of inertia
Explanation:
True or False: A tree is an example of an object that contains chemical energy. help!! Please!! True False
Answer:
Is a tree an example of chemical energy?
Take, for example, an apple tree. The tree absorbs light energy from sunlight, converting the light energy into chemical potential energy stored in chemical bonds. The tree uses this energy to build leaves and branches and fruit. ... Then it takes that heat and converts it into motion, or kinetic energy
Explanation:
A 40 kg shell is flying at a speed of 72 km/h. It explodes into two
pieces and one piece with a mass of 15 kg stops. The velocity of the
other piece will be 32 m/s.
true or false?
Answer: This is true
Explanation: v2=800/25= 32m/s
QUICK WILL GIVE BRAINLIEST EDG 2021
What is the best prediction for what will happen when all of the hydrogen in the sun has undergone fusion?
Helium nuclei will split to form hydrogen and the sun will no longer release energy.
Helium nuclei will split to form hydrogen and the sun will continue to release energy.
Helium nuclei will fuse to create heavier elements but the sun will no longer release energy.
Helium nuclei will fuse to crazy heavier elements and the sun will confuse to release energy.
Answer:
Helium nuclei will split to form hydrogen and the sun will no longer release energy.
Explanation:
:)
When all the hydrogen in the sun has gone for fusion, helium nuclei will split to form hydrogen and the sun will continue to release energy.
What is nuclear fusion?The term nuclear fusion has to do with the combination of two or more nuclei to obtain a larger nuclei with the emission of a tremendous amount of energy.
Hence, when all the hydrogen in the sun has gone for fusion, helium nuclei will split to form hydrogen and the sun will continue to release energy.
Learn more about fusion:https://brainly.com/question/12701636
#SPJ2
why is the sun considered as the prime source of heat energy ?
Answer:
The Sun is the Ultimate Source of Energy. Every morning the sun rises, bringing light and heat to the earth, and every evening it sets. ... Plants convert light energy from the sun into chemical energy (food) by the process of photosynthesis. Animals eat plants and use that same chemical energy for all their activities.
2. A hammer hits a nail with a force of 50 N into some wood. The area of the point of the nail is 0.02 cm2. What is the pressure the nail puts on the wood?
What is the pressure the nail puts on the wood?
Answer:
hmmdndbdjjdjdhdjejjejdjdhdudududjhdhdhdhd
I hope this helps.......
How is it that even light precipitation can still cause the collection of large amounts of water.
Answer:
the heat of the light.
Explanation:
no matter the light, there's always heat being produced from it. and heat makes liuqid rise
True or false.
a-
Magnetic force is a force acting from a
distance.
A 15 kg dog sits at the top of a hill. If the dog possesses 600 J of potential energy,
what is the height of the hill?
Answer:
4.08m
Explanation:
h = PE/mg
h = 600/(15)(9.8)
h = 600/147
h = 4.08m
what substance is made of components that are not chemically bonded we call that?
they are right it's mixture
Which state of matter would be described as having low energy, with particles that are fixed in place and their only motion is vibrating? *
1 point
A.Liquid
B.Gas
C.Plasma
D.Solid
What is happening to the water molecules as it changes from ice to liquid water? *
1 point
A.They are losing energy, can’t move only vibrate
B.They are gaining energy, can move and slide past each other
C.They are moving at high speeds and are far from each other
D.They are gaining energy, moving slowly until they evaporate
Which state of matter has the highest energy level and is composed of freely moving charged particles? *
1 point
A.Gas
B.Liquid
C.Plasma
D.Solid
Which model(s) best represents the kinetic energy and particle arrangement of a gas? *
1 point
Captionless Image
A.Diagram A
B.Diagram B
C.Diagram C
D.Diagrams B and C
Which state of matter has the highest energy level and is composed of freely moving charged particles? *
1 point
A.Gas
B.Liquid
C.Plasma
D.Solid
Use the Phase Change Diagram to answer questions 5-10
What phase change process is occurring at #2? *
1 point
A.Vaporization
B.Freezing
C.Melting
D.Condensation
What state of matter is represented by the letter A? *
1 point
A.Plasma
B.Liquid
C.Solid
D.Vapor
What phase change process is occurring at #3 and what is happening in terms of energy? *
2 points
A.Vaporization, energy is added
B.Vaporization, energy is removed
C.Condensation, energy added
D.Condensation, energy is removed
What state of matter is represented by the letter B and what phase change process is happening at #1? *
2 points
A.B is solid, and it is freezing as energy is removed
B.B is liquid, and it is evaporating as energy is removed
C.B is solid, and it is melting as energy is added
D.B is liquid, and it is freezing as energy is removed
What state of matter is represented by the letter C, and what would it change into if enough energy is added? *
1 point
A.Gas, it would change to vapor
B.Liquid, it would change to gas
C.Gas, it would change to plasma
D.Gas, it would change to liquid
What phase change process is occurring at #4? *
1 point
A.Condensation
B.Vaporization
C.Freezing
D.Melting
How does temperature affect the particle arrangement and state of matter of a substance? *
1 point
Captionless Image
A.As temperature increases the energy of particles increases and the substance changes from solid to liquid to gas
B.As temperature increases the energy of particles decreases and the substance changes from gas to liquid to solid
C.As temperature decreases the energy of particles increases and the substance changes from gas to liquid to solid
D.As temperature decreases the energy of particles decreases and the substance changes from solid to liquid to gas
What is the major difference between the solid, liquid, and gas phases of matter? *
2 points
Your answer
Submit
why do we use a circuit breaker ?
Answer:to protect an electrical circuit from damage caused by excess current from an overload or short circuit.
Explanation:
PLEASE HELP!!! GIVING BRAINLIEST!! ill also answer questions that you have posted if you answer these correctly!!!! (77pts)
Answer:
Ex.
1. When we try cycling when we push the padel cycle starts but if we do not push the padels the cycle will stop on one position........
A roller skater of 47kg moving with a velocity of 12 m/s to the east picks up a bag of 6.0 kg. What is the final velocity of the person traveling with the basket? show your work HINT: Use the law of conservation of momentum in the perfectly inelastic collision m1v1i + m2v2i = (m1+m2) vf
plz guys i have exam now answer her quikly
Answer:
v_f = 10.85 m/s
Explanation:
We will apply the law of conservation of momentum here:
[tex]m_{1}v_{1i} + m_{2}v_{2i} = m_{1}v_{1f}+m_{2}v_{2f}\\[/tex]
where,
m₁ = mass of roller skater = 47 kg
m₂ = mass of bag = 6 kg
v_1i = initial speed of roller skater = 12 m/s
v_2i = initial speed of the bag = 0 m/s
v_1f = final speed of the roller skater = ?
v_2f = final speed of the bag = ?
Both the bag and the skater will have same speed at the end because kater is carrying the bag:
v_1f = v_2f = v_f
Therefore, the equation will become:
[tex](47\ kg)(12\ m/s)+(6\ kg)(0\ m/s)=(47\ kg)(v_{f})+(5\ kg)(v_{f})\\564\ N.s = (47\ kg+5\ kg)(v_{f})\\v_{f} = \frac{564\ N.s}{52\ kg}\\[/tex]
v_f = 10.85 m/s