Answer:
C. Density
Explanation:
A baseball bat is a lever. Which of the following explains how a baseball bat differs from a lever like a pry bar?
Complete question is;
A baseball bat is a lever. Which of the following explains how a baseball bat differs from a lever like a pry bar?
A) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a long distance.
B) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a short distance.
C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.
D) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a short distance.
Answer:
C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.
Explanation:
The correct answer is option C. This is because unlike in a pry bar, the effort force when swinging a baseball bat is larger and it is applied over a short distance; and in return the resisting force is smaller and it's applied over a long distance.
can anyone solve this?
Carol pushes down at an angle of 30 degrees from the vertical on a 10.0 kg wood crate causing the crate to move across a wood floor at a constant velocity of 2.0 m/s. How much force does Carol exert on the crate? (μs = 0.5 and μk = 0.2)
Answer:
F = 39.2 N
Explanation:
Since, the object is in uniform motion. Therefore, the frictional force on object will be:
Frictional Force = μk N = μk mg
where,
μk = coefficient of kinetic friction = 0.2
m = mass of crate = 10 kg
g = 9.8 m/s²
Therefore,
Frictional Force = (0.2)(10 kg)(9.8 m/s²)
Frictional Force = 19.6 N
The horizontal component of force must be equal to this frictional force to continue the uniform motion:
F Sin 30° = 19.6 N
F = 19.6 N/Sin 30°
F = 39.2 N
What is the net force required to accelerate a 1.1 kg box at a rate of 2.8
m/s??
Answer:
Fnet = 13.86N
Explanation:
Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.
Mathematically, net force is given by the formula;
[tex] Fnet = Fapp + Fg[/tex]
Where;
Fnet is the net force Fapp is the applied forceFg is the force due to gravitationGiven the following data;
Mass = 1.1kg
Acceleration = 2.8m/s²
To find the applied force;
[tex] Fapp = ma[/tex]
Substituting into the equation, we have;
[tex] Fapp = 1.1 * 2.8[/tex]
Fapp = 3.08N
To find the gravitational force;
We know that acceleration due to gravity, g = 9.8m/s²
[tex] Fg = mg[/tex]
Substituting into the equation;
[tex] Fg = 1.1 * 9.8[/tex]
Fg = 10.78N
To find the net force;
[tex] Fnet = Fapp + Fg[/tex]
Substituting into the equation, we have;
[tex] Fnet = 3.08 + 10.78[/tex]
Fnet = 13.86N
Therefore, the net force required is 13.86N
YO YO I NEED HELP!!!
Answer: Light energy
Explanation: Light energy is a form of radiant energy that is visible to the human eye.
Which of the following is a location with a high probability of containing an electron?
O orbital
O proton
O Bohr
Answer:
The answer is orbitial! :))
Answer:
it's orbitial
Explanation:
A student hangs the south pole of a bar magnet near the north pole of
another hanging bar magnet. What do the magnets do?
A. They move away from each other.
B. They move away from each other, then toward each other.
C. They move toward each other.
O D. They do not move.
When the south pole of a bar magnet is near the north pole of another bar magnet, they move toward each other. Therefore, option (C) is correct.
What is a magnet?A magnet can be described as a substance that creates a magnetic field and this magnetic field is the reason for the considerable properties of a magnet. The magnetic force pulls ferromagnetic materials, such as iron, cobalt, etc., and attracts or repels other magnetic substances.
A permanent magnet is composed of a material that is magnetized and produces its own magnetic field such material can be magnetized, and strongly attracted towards a magnet, is known as ferromagnetic, and contain the elements iron, and cobalt.
Each bar magnet possesses a set of North and South poles within them. The south pole of one magnet brings closer to the north pole of another magnet they attract each other and move toward each other.
Learn more about the magnet, here:
brainly.com/question/2841288
#SPJ5
anybody got any answers???
Answer:
b? to a?
Explanation:
It converts mechanical energy to electrical.
Therefore, Option A is the correct answer
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
Answer:
The negative charges and positive charges in the wire are pushed in the opposite directions by the magnetic field .
Explanation:
Hope this helps
When a wire moves through a magnetic field, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
What is electromagnetic induction?A magnetic field is a region in space where a magnetic force can be detected, so when a wire moves through a magnetic field, the magnetic force exerted on the wire generates a voltage, and the voltage creates an electric current in the wire. This electromagnetic induction phenomenon occurs because of the movement of charged particles within the wire, and this phenomenon can be explained by Faraday's Law of Electromagnetic Induction.
Hence, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
Learn more about electromagnetic induction here.
https://brainly.com/question/26334813
#SPJ6
The question is incomplete, complete question is below
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
A) electromagnetic induction
B)magnetic force
What is the common property of the elements pinctogen
Answer:
The pnictogens consist of two non-metals, two metalloids, one metal, and one element with unknown chemical properties. All the elements in the group are solids at room temperature, except for nitrogen which is gaseous at room temperature.
What happens when the two waves meet?
A.
They superimpose and remain at the same amplitude.
B.
They experience destructive interference and cancel each other out.
C.
They experience constructive interference and have twice the amplitude.
D.
They superimpose and have half of their original amplitude.
when two or more waves meet, they interact with other. The intersection of waves with other waves is called wave interference. wave interference may occur when two waves that are traveling I opposite directions meet. the two waves pass through each other, and this affects their amplitude
Plz help !!!!!! ................................
Answer:
I think the answer is B. Can I have brainlest if I am right, please?
Explanation:
Answer:
it is B because period =1/ frequency and B has lower period
plz help urgent
will give brainliest
Answer:
D
Explanation:
Highest Pressure in water is always at the bottom
The motion of a car on a position time graph is represented with a horizontal tine What does this indicate about the car's motion?
Answer:
Position-Time graphs display the motion of a object by showing the changes of velocity with respect to time.
The motion of a car on a position-time graph that is represented with a horizontal line indicates that the car has stopped moving.
A straight line with a positive slope indicates that the car is moving at a constant velocity, and thus the slope is constant. On the other hand, a curve with a changing slope, shows that the velocity is changing.
Describe the importance that keystone species have in the environment. What would happen if these species disappeared? How would it affect the local ecosystems?
Answer:
See the answer below
Explanation:
The keystone species of an environment are those species of organisms that are highly influential to the functioning of the ecosystem without whom the ecosystem would be drastically affected, lose its structure, or cease to exist totally.
The influence of keystone species in an environment is disproportionately high when compared to their population in the environment. If keystone species disappeared from an environment, such an environment will find it difficult to perform ecosystem functions with an entirely different structure. In some cases, the ecosystem might cease to exist in its entirety because the species that hold it together are no longer present.
What changes when unbalanced forces are
applied to a moving bike along the direction
it is moving?
Water waves with a frequency of 4.5 Hz and a wavelength of 2.0m are traveling across a small harbor that is 200 m wide. How long does it take the waves to travel from one side of the harbor to the over?
Answer:
22.2 seconds
Explanation:
recall that for a regular wave
v = fλ
where v = wave velocity (we need to find this to solve the next part)
f = frequency = 4.5 Hz
λ = wavelength = 2.0m
Substituting these into the equation above,
v = fλ
v = (4.5)(2)
v = 9.0m/s
Also recall that Distance travelled = velocity x time
in our case, we found velocity above (= 9.0 m/s) and the distance across the harbor is given as 200m, hence
Distance travelled = velocity x time
200 = 9.0 x time
time = 200/9.0
time = 22.2 seconds
A force of 5 N gives to mass my and an acceleration of 8m/s2 and a mass m2
an acceleration of 24m/s2. What acceleration would it give if both masses are
tied together
Answer:
a=6m/sec²
Explanation:
f=5 N
a1=8m/sec²
a2=24m/sec
m1=f/a1=5/8kg
m2=f/a2=5/24kg
New, f=(m1+m2)a
a=5/5/8+5/24=5/15+5/24=24*5/20
a=6m/sec²
6. A light ray strikes a reflective plane surface at an angle of 560 with the surface.
a) Find the angle of incidence.
b) Find the angle of reflection.
c) Find the angle made by the reflected ray and the surface.
d) Find the angle made by the incident and reflected rays.
Answer:
deez nouts
Explanation:
HELPP!! Does anybody have the answer key to Lab Report: Conservation of Linear Momentum for my online class for physics?? WILL GIVE 80points
Answer:
Try copy and pasting the intructions it into google, and it should pop up if it exists.
Hope this helps.
Explanation:
Answer:
Send me the download of the lab and I will complete it for you
2. If the ball has a velocity of 2.3 m/s, how long does it take it to go 1.1 m?
s
Answer:
2 seconds lol im just a kid but I know these lol who has tiktok
In this chemical reaction, one or more atoms replaces a part of a
compound.
*
synthesis
decomposition
combustion
replacement
neutralization
Explanation:
If there are more reactants than products, it is a synthesis reaction. If oxygen is a part of the reactant, it is a combustion reaction. If one ion replaces another, it is a single replacement reaction. If there are two compounds in a reactant where cations switch, it is a double replacement reaction.
How long does it take for skin to replace itself
Throughout your life, your skin will change constantly, for better or worse. In fact, your skin will regenerate itself approximately every 27 days. Proper skin care is essential to maintaining the health and vitality of this protective organ.
calculate the value of net force acting on given body?5N acting towards right & 15N force acting towards left on the brick.(draw fbd)
please help!!!!!
Answer:
-10N to the left.
Explanation:
The net force on a body is the single force that represent all the forces acting on a body.
Let the right direction be positive
Let the left direction be negative
Force acting to the right = 5N
Force acting to the left = -15N
Net force = 5N + (-15N) = -10N
The net force will be directed -10N to the left.
How could fluid friction be decressed
Answer:The fluid friction or drag can be reduced are minimised by giving special shape called streamlined shape to the objects which Move through fluids like air or water
Explanation:
plz mark brainlyest
whats the net force
Answer:
13n pushing left
Explanation:
1563 - 1550
A person lifts a package weighing 75 N. If she lifts it 1.2 m off the floor, what work has she done?
Answer:
The answer is 90 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
From the question we have
workdone = 75 × 1.2
We have the final answer as
90 JHope this helps you
Answer:
[tex]\boxed {\boxed {\sf 90 \ Joules}}[/tex]
Explanation:
Work can be found by multiplying the force by the distance.
[tex]W=f*d[/tex]
The force of the package is 75 newtons.
The distance the package is lifted off the ground is 1.2 meters.
[tex]f= 75 \ N \\d=1.2 \ m[/tex]
Substitute the values in and multiply.
[tex]W= 75 \ N *1.2 \ m[/tex]
[tex]W=90 \ N*m[/tex]
1 Newton meter (N*m) is equal to 1 Joule (J).
Therefore, our answer of 90 Newton meters is equal to 90 Joules.
[tex]W= 90 \ J[/tex]
The work done is 90 Joules.
If you throw a ball up with a velocity of 7 m/s, how long will it take for the ball to reach
the top of its path?
Answer:
42secs
Explanation:
v=u-gt
0=7-10t
10t=7
t=7/10
t=7/10*60
t=42
What are gears and what is a lever ?
Answer:
agear lever or agear stick is the lever that you use to change gear in acar or other vehicle
A B-52 bomber jet flies at a horizontal velocity of 286.2 m/s and at an altitude of 7500 m above the ground.
How far away horizontally should a payload be dropped to land on a target?
Answer:
you need to divide 7500/286.2
A 3 kg rubber block is resting on wet concrete. The coefficient of static friction is 0.3. What is the minimum force that must be applied to the block to make the block begin to accelerate?
Answer:
You would have to find the friction force of the rubber block which would be found with the equation of Normal force (mass*gravity) times cooeficient of friction which would give 8.82 N for the amount of friction and because you need more force than 8.82 N (assuming gravity is 9.8)
We need to find the frictional force of the rubber block. This is the normal force (mass × gravity) multiplied by the coefficient of friction, which gives us a friction quantity of 8.82N. This is because it requires a force greater than 8.82N (Gravity is 9.8)
What is coefficient of friction?Mathematically, = F/N, where F represents the frictional force and N represents the normal force. Because F and N are both measured in force units (such as Newtons or Pounds), the coefficient of friction is dimensionless.The friction coefficient is the ratio of the frictional force resisting movement of two contacting surfaces to the normal force pushing the two surfaces together.Both F and N are measured in units of force (such as Newtons or Pounds), so the coefficient of friction is dimensionless. The coefficient of friction has different values for static friction and sliding friction.In stiction, the frictional force resists the force applied to the object and the object remains stationary until the force of stiction is overcome. In kinetic friction, the frictional force opposes the motion of an object.To learn more about coefficient of friction, refer to:
brainly.com/question/20241845
#SPJ2