Answer:
Disrupts communication systems
Composed of charged particles
travels at about 400 km/s
Answer:
BCD
Explanation:
Determine the mass of AgCl(s) produced when 0.91 g of AgNO3 in an aqueous solution reacts with excess NaCl aqueous solution as shown below: AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq) i Respond with the correct number of significant figures in scientific notation (Use E notation and only 1 digit before decimal e.g. 2.5E5 for 2.5 x 10")
Answer:
0.77 g
Explanation:
Step 1: Write the balanced equation
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
Step 2: Calculate the moles corresponding to 0.91 g of AgNO₃
The molar mass of AgNO₃ is 169.87 g/mol.
0.91 g × 1 mol/169.87 g = 5.4 × 10⁻³ mol
Step 3: Calculate the moles of AgCl produced from 5.4 × 10⁻³ moles of AgNO₃
The molar ratio of AgNO₃ to AgCl is 1:1. The moles of AgCl produced are 1/1 × 5.4 × 10⁻³ mol = 5.4 × 10⁻³ mol.
Step 4: Calculate the mass corresponding to 5.4 × 10⁻³ moles of AgCl
The molar mass of AgCl is 143.32 g/mol.
5.4 × 10⁻³ mol × 143.32 g/mol = 0.77 g
Can some one help I'm lost iam being timed:( Show using two conversion factors how you would convert from 0.020 kg into mg
Answer:
20000 Mg
Explanation:
There is a 2 percent defect rate at a specific point in a production process. If an inspector is placed at this point, all the defects can be detected and eliminated. The inspector would cost $10 per hour and could inspect units in the process at the current production rate of 48 per hour.
If no inspector is hired and defects are allowed to pass this point, there is a cost of $11 per defective unit to correct the defects later on.
Assume that the line will operate at the same rate (i.e., the current production rate) regardless of whether the inspector is hired or not.
a. If an inspector is hired, what will be the inspection cost per unit? (Round your answer to 3 decimal places.)
Inspection cost per unit _____________$
b. If an inspector is not hired, what will be the defective cost per unit? (Round your answer to 3 decimal places.)
Defective cost per unit _____________$
c. Should an inspector be hired based on costs alone?
Answer:
A) $0.208 per unit
B) $0.220 per unit
C) An inspector should be hired
Explanation:
percentage of defect rate = 2% = 0.02
cost of inspector = $10 per hour
production rate = 48 per hour
cost of not hiring an inspector = $11
A) Determine the inspection cost per unit if an inspector is hired
= cost of inspector / production rate
= 10 / 48 = $0.208 per unit
B) Determine the defective cost per unit if an Inspector is not hired
= cost of not hiring an inspector * percentage of defect rate
= 11 * 0.02
= $0.220 per unit
C) Inspection cost < defective cost i.e. $0.208 < $0.220 hence an inspector should be hired
A continuously stirred tank reactor is designed to remove the hazardous waste compound trichloroethylene (TCE) from industrial wastewater. The tank is 3250 liters. The wastewater flows into the tank at 200 L/min with a TCE concentration of 25 mg/L. The reactor decays TCE at a reaction rate of 0.20 min-1 . What is the steady-state concentration of TCE in the treated water leaving the reactor
Answer:
the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L
Explanation:
Given that;
Tank volume v = 3250 liters
wastewater flows into the tank Q = 200 L/min
TCE concentration Co= 25 mg/L
reactor decays TCE at a reaction rate K = 0.20 min-1
mass balance
we know that;
Accumulation = inflow - outflow ± generation
⇒dc/dt = QCo - Qc ± rc.V
now at a steady state; dc/dt = 0
so
0 = QCo - Qc + rcV
where rc = -kc
0 = QCo - Qc - kcV
Qc + kcV = QCo
c(Q + kV) = QCo
c = QCo / (Q + kV)
so we substitute
c = (200 × 25) / (200 + (0.2×3250))
c = 5000 / 850
c = 5.88 mg/L
Therefore, the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L
Just like cans of soup, atoms of the same element often have different masses. These different varieties are called isotopes. In the Average Atomic Mass Gizmo, you will learn how to find the average mass of an element using an instrument called a mass s
Answer:
ions are deflected and the lighter the ions the more the deflection.
Placing magnetic field in the path of the ions cause them to move in a curved path.
Explanation:
This question is all about the way in which mass spectroscopy works. Mass spectroscopy Is one of the techniques in spectroscopy which is used in the identification of chemical compounds.
Mass spectroscopy works based on the principle of ionization. For a mass spectroscopy to start ionization must first occur that is to say this is the first step in the identification of compound in mass spectroscopy.
The following steps are involve in mass spectroscopy;
=> Ionization: the molecules of the sample are first ionized. The ions formed here are positive ions.
=> Acceleration: the ions in step one are accelerated.
=> Deflection: the smaller ions get deflected more than the bigger ions. The magnetic field is used in the deflection of this ions.
=> Detection: the ions are then detected.
Therefore, to answer the question, the ions are deflected and the lighter the ions the more the deflection.
Placing magnetic field in the path of the ions cause them to move in a curved path.
1. How would you describe what red cabbage juice is?*
(1 Point)
Acid
Neutral
Alkali
Indicator
Salt
CH3CH3C(CH3)2CH2I classification and name
Answer:
1,2 di methyl 5 ene tri chloro hexane
Please help, and if you could also give me a step by step that would be awesome!!
Answer:
4.4 g
Explanation:
Step 1: Write the balanced equation
Cu + 4 HNO₃ ⇒ Cu(NO₃)₂ + 2 NO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 3.2 L of NO₂ at STP
At standard temperature and pressure, 1 mole of NO₂ occupies 22.4 L.
3.2 L × 1 mol/22.4 L = 0.14 mol
Step 3: Calculate the moles of Cu needed to produce 0.14 moles of NO₂
The molar ratio of Cu to NO₂ is 1:2. The moles of Cu needed are 1/2 × 0.14 mol = 0.070 mol.
Step 4: Calculate the mass corresponding to 0.070 moles of Cu
The molar mass of Cu is 63.55 g/mol.
0.070 mol × 63.55 g/mol = 4.4 g
there is no such thing as a universal solvent- explain? I’ll mark brainiest!!!
Answer:
A true universal solvent does not exist. Although water is considered to be a the "universal solvent" it only dissolves other polar molecules. It does not dissolve nonpolar molecules, including organic compounds such as fats and oils. It is only called so because it can dissolve many more than other liquids.
How many moles of "02" are in a 192g sample of O2? *
1
2
3
4
5
6
7
Answer: The number of moles of [tex]O_2[/tex] are 6.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
Given mass = 192 g
Molar mass = 32 g/mol
[tex]\text{Number of moles}=\frac{192g}{32g/mol}=6mol[/tex]
The number of moles of [tex]O_2[/tex] are 6.
HELP!!!! Which of the following substances is a major component in acid rain?
A) KOH
B) NH3
C) SO2
D) NaOH
Answer:
(C) SO2.
SO2 is known as sulfur dioxide.
The below information about acid rain and SO2’s involvement is from epa.gov:
“Acid rain results when sulfur dioxide (SO2) and nitrogen oxides (NOX) are emitted into the atmosphere and transported by wind and air currents. The SO2 and NOX react with water, oxygen and other chemicals to form sulfuric and nitric acids. These then mix with water and other materials before falling to the ground.”
Explanation:
What is the number of nitrogen molecules that reacted with excess hydrogen to make 2x10^10 molecules of ammonia
According to stoichiometry and mole concept,1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is important while balancing chemical equations.
In the given example, as 1 molecule of nitrogen produces 2 molecules of ammonia
∴2 x 10¹⁰ molecules of ammonia will be produced when 2 x 10¹⁰×1/2=1×10¹⁰ molecules .
Thus, 1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ6
What is the equilibrium constant for the reaction
SO2(g) + NO2(9) = SO3(g) + NO(g)?
А. Keq: [S03)(S02]
[NO][NO2]
B. Keq: [SO2)(NO2]
[SO3)(NO]
C. Keq: [SO3)3(NO]
[SO2)2(NO2)2
D. Keq: [SO3)(NO]
[SO2]NO2]
Answer:
D. Keq: [SO3][NO] /[SO2]NO2]
Explanation:
Hello!
In this case, according to the process to set up equilibrium expressions for chemical reactions at equilibrium, we realize we need to write up the concentration of products on top and that of reactants on bottom; thus, for there chemical reaction herein specified, we obtain:
[tex]Keq=\frac{[SO_3][NO]}{[SO_2][NO_2]}[/tex]
Thereby, the answer is D. Keq: [SO3][NO] /[SO2]NO2].
Best regards!
Answer:
D
Explanation:
What causes lightning?
A. Build up of electric charges in the clouds
B. Flow of electric charges among clouds
C. Light energy created in the clouds
D. Reflection of light by the clouds
Answer:
B.
Explanation:
Not sure if this is correct if not sorry.
tell me how is your life as a youngster
Answer:
ruthless, my style as a juvenile
ran with a gang, slanged in the meanwhile
Explanation:
An unknown compound contains only C , H , and O . Combustion of 5.90 g of this compound produced 11.8 g CO2 and 4.83 g H2O . What is the empirical formula of the unknown compound
Answer:
C₂H₄O
Explanation:
In a compound that contains Cabon, hydrogen and oxygen, the combustion produce CO₂ from the carbon, and H₂O from the hydrogens. Using the mass of the products we can solve the moles of Carbon and hydrogen. The empirical formula is the simplest whole-number of atoms present in a molecule.
Moles CO₂ = Moles C:
11.8g CO₂ * (1mol / 44g) = 0.268 moles CO₂ = 0.268 moles C * (12g/mol) =
3.216g C
Moles H₂O = 1/2 moles H:
4.83g H₂O * (1mol / 18g) = 0.268 moles H₂O * (2 mol H / 1 mol H₂O) =
0.537 mol H * (1g/mol) = 0.537g H
Mass O to find moles O:
5.90g Sample - 3.216g C - 0.537g H = 2.147g O * (1mol / 16g) = 0.134 moles O
Ratio of atoms -Dividing in 0.134 moles-:
C = 0.268mol C / 0.134 mol O = 2
H = 0.537mol H / 0.134 mol O = 4
O = 0.134mol O / 0.134 mol O = 1
Empirical formula is:
C₂H₄OWhen lava cools outside the Earth, ____ igneous rocks are formed
Answer:The rock forms large crystals
Explanation:
explain how liquid can enter the gas phase without reaching its boiling point
Early chemists, known at the time as alchemists, had a difficult time understanding the Law of Conservation of Mass. Using the burning of wood as an example, what property of matter made this law difficult for early scientists to understand?
The law of conservation of mass states that, for any isolated system, the mass can neither be created nor be destroyed
After burning a log, the remains that are left behind after it burns are lesser than what would initially seem. There is a difference in mass before the burning of the log after the burning of the log. This seems like a violation of the law of conservation of mass, which would have made it difficult for early chemists to understand it. But if we consider the surroundings as a system then we can see that the mass that is lost in burning is actually converted into smoke and energy or forming other forms of substances. Then considering the whole system we can see that the mass and energy are conserved and interrelated.learn more about conservation of mass and energy:
https://brainly.com/question/13971039
7. Consider an element with 2
electrons on the 1st shell and 4
electrons on the 2nd shell. What
element is likely to have that Bohr
model?
Answer:
Carbon (C)
Explanation:
The electron configuration of Carbon is 2-4.
I would like to get some examples of Newtons 1st,2nd, and 3rd Law
Answer:
Explanation:
Newtons 1st law:
If you slide a hockey puck on ice, eventually it will stop, because of friction on the ice. It might also stop if a hockey player places their stick in front of it.
Newton's 2nd law:
If the mass of an object is 20 kg and it's acceleration is 5 m/s, the force acting upon it is (m*a or 20*5) 100 N.
Another example that proves that force is dependent upon mass is that if you were to move a car and a truck (that were both previously stationary) at the same speed, the car would take less force/effort to move than the truck.
Newton's 3rd law:
If a book on a table, the table is exerting a force on it that is equal and opposite to the force of gravity.
If two soccer balls of the same mass collide, one moving and one stationary, then they would both apply an equal and opposite force onto each other, causing the moving ball to stop and the previously stationary ball to move at the speed of the previously moving ball.
I need help please please
Answer:
B should be the answer, and ur low-key valid lol
Explanation:
How many grams of silver nitrate are needed to prepare 0.125 M solution in 250.0 mL of water?*
(1 Point)
AgNO₃
Ag
= 107.868 8
mol
N = 14.0078
mol
8
0 = 15.999
mol
0.313 g
169.872 g
0.0849 g
5.31 g
O 31.3 g
Answer:5.3 grams AgNO3
Explanation:
To solve your problem, take a look at the definition of molality (m):
moles of solute/kg of solvent
You are given the grams of solvent (water) to find the grams of silver nitrate.
First, convert 250 grams to kg:
250 g * 1 kg / 1000g = 0.250 kg
Now that you have the kg of solvent, you can solve for the moles of solute:
kg of solvent * molality = moles of solute
0.250 kg * 0.125 m = 0.03125 mol AgNO3
You can convert the number of moles to grams using the molar mass of AgNO3, which is 169.872 g/mol:
moles of solute * molar mass of solute = grams of solute
0.03125 mol AgNO3 * 169.872 g/mol = 5.3085 g
Because your question provides two significant digits, you must round this number to get the final answer:
5.3 grams AgNO3
I hope this helps!
Richard sketched models of two different neutral isotopes of oxygen. If the
isotope models are accurate, which statement might be true? (Refer to the
periodic table if necessary.)
A. One shows 7 protons, and one shows 9.
B. One shows 8 neutrons, and one shows 9.
C. One shows 8 electrons, and one shows 9.
D. One shows 8 protons, and one shows 7.
Answer:
its b
Explanation:
just did the test on A P E X
If the isotope models are accurate, One shows 8 neutrons, and one shows 9. Therefore, the correct option is option B.
What is isotope?A chemical element's isotope is one of more than one species of atoms that share the same atomic number, spot on the periodic table, and almost identical chemical activity, but differ in atomic mass and physical characteristics. There are a number of isotopes for each chemical element.
The first step in identifying and labelling an atom is to count the protons within its nucleus. Usually, this nuclear number is denoted by the letter Z. The fact that all atoms possessing the same number of electrons have essentially equal chemical characteristics lends the atomic number its enormous significance. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.
Therefore, the correct option is option B. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.
To know more about isotope, here:
https://brainly.com/question/11680817
#SPJ5
list 5 island in the Philippines
Answer:
Coron, Palawan, El Nido, Palawan, Cebu, Boracay, Siargao.
Explanation:
I hope this helps.
coron,palawan,El nidu, Cebu and boracay are 5 island in Philippines.....
what is its molar concentration?
Answer:
The correct answer is - the number of moles of solute per liter of solution.
Explanation:
The molar concentration is also known as molarity which is the amount of concentration of a solute is in a chemical solution is the number of moles of solute per unit volume of solution. It is represented as M and can be calculated by:
M = n/v
Where n is the number of moles of the solute and,
v is the volume of solution (in liters normally)
It is worldwide used measurment for the concentration.
Ionic compounds form between two metals true
Answer (TL;DR):
False, ionic compounds form between a metal and a nonmetal. This is because metals are looking to lose electrons to get a full outer shell while nonmetals are looking to gain electrons to get a full outer shell.
Explanation:
Atoms have a full outer shell when their outermost shell holds the maximum number of electrons. For example, if the outermost shell is the first shell of the atom, it can hold up to 2 atoms. When this shell holds 2 atoms, it is considered full. If the outermost shell is the second shell of the atom, it can hold up to 8 atoms. When this shell holds 8 atoms, it is considered full. This can also be referred to as an atom "gaining a complete octet." The reason that atoms want a complete octet is to become stable and less reactive.
Let's say an atom with 3 shells has only 1 electron on the third shell. It doesn't have a complete octet and it wants to gain one. The third shell can hold up to 8 electrons. So, to gain a complete octet, the atom can either gain 7 electrons or just lose the 1 that it already has, which is the easier option. This is the case with metals and the opposite goes for nonmetals.
Because metals want to lose electrons and nonmetals want to gain electrons, they form compounds with each other.
I hope this helps!
Surface tension is a force that affects....
A. Gases
B. Plasmas
C. Solids
D. Liquids
Answer:
option A iis the right answer
What is the normal pH range of a Base?
Answer:
7.35 - 7.45
Explanation:
The pH scale ranges from 0 (strongly acidic) to 14 (strongly basic or alkaline). A pH of 7.0, in the middle of this scale, is neutral. Blood is normally slightly basic, with a normal pH range of about 7.35 to 7.45. Usually, the body maintains the pH of blood close to 7.40.
Hope this helps
Answer:
The normal pH range if a base is more than 7
Explanation:
Basideally the pH range goes from 0-14 in which
Acidic range is :0-7
Neutral :7
Base : 7 - 14
DIRECTION: Supply the missing information about the scientist listed in the graphic
organizer.
HELP ME PLEASSEEEE
I'll give you brainliest I promise
Answer:
The missing information or their role in the discovery of the cell is as follows:
Robert Hooke: He was the first scientist to called cells to tiny box-like cavities he saw in cork and illustrated as cells.
A. Leeuwenhoek: he was a microscopist and microbiologist who used microscopes and observed many other living cells. He called animalcules to these single-cell living organisms later used to prove that cells are the fundamental unit of life.
Schwann and Schleiden: They presented the theory that suggested that the cells are basic building blocks of all living things.
Virchow: He observed that the cell dividing and come from pre-existing cells.