Answer: The answer is B
Explanation:
RiP BoZo. shout out to faze gabi staright up bopped potato girl.
Answer:
B
:D
Explanation:
In an aqueous solution at 25°C, if [H30+] = 3.3 * 10^4 M, then [OH-] is:
Answer:
[OH-] = 3.0 x 10^-19 M
Explanation:
[H3O+][OH-] = Kw
Kw = 1.0 x 10^-14
[H3O+][OH-] = 1.0 x 10^-14
[OH-] = 1.0 x 10^-14 / 3.3 x 10^4 = 3.0 x 10^-19
An alpha particle is an ionized helium nucleus, consisting of 2 protons and 2 neutrons bound together. When alpha particles are beamed toward a thin metal foil, most of them pass through, undergoing a small deflection, while a small fraction of them bounce back at much larger angles in excess of 90 degrees relative to their incoming direction. The reason this happens is that Group of answer choices
Answer:
Due presence of empty as well as heavy particles.
Explanation:
The main reason for this is the presence of empty spaces as well as heavy particles in the nucleus of Helium atom. Most of the beam pass through the helium atom due to the presence of empty spaces in the atom whereas some beams deflect from the helium atom because both repel each other due to same charge i.e. positive charge. Few beams of light bounce back with an angle of 90 degree due hitting with the nucleus where heavy particles such as neutron and proton are present.
What is the mass of 3.5 x 10 23 molecules of co2
Answer:
x = 3/6.02 = 0.50.
Explanation:
1 mole of CO2 has 6.02 x 10^23 molecules of CO2.
Say x moles of CO2 has 3.0x10^23 molecules of CO2.
Therefore x = 3/6.02 = 0.50.
Directions: Read each sentence carefully. Write the letter of the
correct answer on the answer sheet provided.
1. What is produced when two surfaces rub against each other?
A. air
B. pressure
C. motion
D. friction
2. Which surface increases friction?
A. polished B. rough
C. lubricated
D. shiny
3. What causes falling objects to fall?
A. speed
B. gravity
C. acceleration
D. wind
4. Which surface decreases friction?
A. smooth B. rugged
C. rough
D. rocky
5. Why do you move faster when running down a hill?
A. Gravity pulls you up.
C. Gravity pulls you down.
B. Wind pushes you back.
D. Wind pulls you.
Answer:
1 - D) friction
2- B) rough
3- B) gravity
4- A)smooth
5- C)gravity pulls you down
C. 2.86 g
D. 1.22 g
13. At what Kelvin temperature will 25.2 mol of Xe occupy a volume of 645 L at a pressure of 732 torr?
A. 361 K
B. 291 K
C. 402 K
D. 300 K
write the chemical equation of sodium reacts with hydrochloric acid
Answer:
NaOH + HCl → H2O and NaCl.
Explanation:
plzz mark as brainliest
Answer:
NaOH + HCl → H2O and NaCl.
Explanation:
I'm not sure 100%, but I think so...
CsBr formula name???
Answer
PubChem CID/molecular formula
Explanation:
Cesium bromide
PubChem CID 24592
Molecular Formula CsBr or BrCs
Synonyms CESIUM BROMIDE 7787-69-1 Caesium bromide Cesiumbromide Cesium bromide (CsBr) More...
Molecular Weight 212.81 g/mol
Component Compounds CID 260 (Hydrogen bromide) CID 5354618 (Cesium)
have a good day /night
may i please have a branllist
True or False: Having a greater volume definitely means a lower concentration (molarity) solution
Having a greater volume definitely means a lower concentration (molarity) of solution. So, the statement is true.
What is meant by molarity of a solution ?Molarity of a solution is defined as the number of moles of solute present per unit volume of solution.
Here,
Since, the number of moles of solute in one litre of solution is known as the molarity, we can say that the change in volume of the solution will affect the molarity of the solution.
Molarity, M = n/V
where n is the number of moles of solute and V is the volume of solution
From the equation, we can say that the molarity of the solution is inversely proportional to its volume.
We know that, molarity of a solution is a temperature dependent parameter.
As the volume of the solution increases, the temperature also increases( Volume [tex]\alpha[/tex] Temperature). When the temperature increases, it affects the molarity of the solution such that the number of moles remains constant and as a result of the increasing volume, the molarity decreases.
Hence,
Having a greater volume definitely means a lower concentration (molarity) of solution.
To learn more about molarity, click:
https://brainly.com/question/29884686
#SPJ2
Add an oxide ion to Fe2O3
Answer:
Iron Oxide (Fe2O3) also known as rust is also an ionic bond, it has metallic compound Iron (Fe) which contains positively charged cations and it has nonmetallic compound Oxygen (O) which contains negatively charged anions.
Explanation:
i hope it help
Composition of the air breathed in and the air breathed out changes
Answer:
breathed in air contains oxygen while breathed out air contains higher percentage of CO2
How
many mols are in 151 g of dinitrogen monoxide?
Answer:
3.43 moles
Explanation:
To convert moles into grams you must take the number of grams and divide it by the atomic mass of the compound.
in this case, grams is 151 and N2O has an atomic mass of 44.013
so your equation would look like
151/44.013=3.430804535
your answer would be 3.43 moles
For each of the following precipitation reactions, complete and balance the equation, indicating clearly which product is the precipitate.
a) Ba(NO3)2(aq) + (NH4)2SO4(aq) -->
b)CoCl3(aq) + NaOH(aq) -->
c)FeCl3(aq) + (NH4)2SS(aq) -->
Answer:
pagtoon og imo dots
Explanation:
pagtoon og imo dots
Radium-222 undergoes radioactive decay to produce radon-218. Which
particle needs to be added to this equation to show that the total numbers of
neutrons and protons are not changed by the reaction?
22 Ra
21°Ra + ?
88
86
A. He
B. o
tie
c. Le
D. He
Answer:
2/4 HE
Explanation:
Ape.x
charles law . who can please help me with these two problems asap ?
Answer:
k
Explanation:
Is liquid ammonia a household acid?
Yes it is an cleaning product
Answer:
yes
Explanation:
it cleans in the house
Where is chemical energy contained in a compound?
A. in the movement of the electrons
B. in the nuclei
C. in the bonds
D. in unbonded electrons
Answer:
C
Explanation:
Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic.
Answer:
The Answer is C.
Explanation:
Cause I'm smart
A 50.0 mL sample of buffer solution contains 0.120 M acetic acid and 0.150 M sodium acetate. If 5.55 mL of 0.092 M NaOH is added to this solution, identify the resulting number of moles of acetic acid, sodium acetate, and NaOH.
Answer:
see calculations below
Explanation:
Given: HOAc ⇄ [H⁺] + [OAc⁻]
C(i) 0.12M 0M 0.15M
mix => 5.55ml(0.092M NaOH) / (50ml + 5.55ml)
= 0.00555(0.092)mole NaOH / 0.0555 L Soln
= 0.0092M in NaOH is added into the initial buffer solution
= 0.0092M in OH⁻ (NaOH is a strong base => 100% ionized)
Rxn => Addition of 0.0092M OH⁻ will react with 0.0092M H⁺ shifting buffer . equilibrium to the right decreasing [HOAc] and increasing [OAc⁻] by . 0.0092M each.
Therfore ...
Given: HOAc ⇄ [H⁺] + [OAc⁻]
C(i) 0.12M 0M 0.15M
ΔC - 0.0092M +x +0.0092M
C(f) 0.1108M x 0.1592M => New Concentrations . after adding 0.0092M . NaOH
Substituting new acid and ion concentrations into Ka expression ...
Ka = [H⁺][OAc⁻]/[HOAc] = (x)(0.1592M)/(0.1108M) = 1.75 x 10⁻⁵M
=> x = [H⁺](new) = (1.75 x 10⁻⁵M*)(0.1108M)/(0.1592M) = 1.22 x 10⁻⁵M in H⁺ ions
*units of Ka are Molar
FYI => Adding a strong base to a buffer solution will shift pH to more basic.
Adding a strong acid to a buffer solution will shift pH to more acidic.
=> (such is a good way to check that your buffer calculations are correct.)
NOTE => Question asks for moles of HOAc, Na⁺OAc⁻ & NaOH after adding base. Giving answers in terms of Molarity (moles/Liter) is same as moles. Therefore ...
[HOAc] = 0.1108M
[NaOAc] = 0.1592M
[NaOH] = ∅M (from rxn of H⁺ + OH⁻ => H₂O, all NaOH was consumed in acid/base reaction. Remaining are only Na⁺ as a spectator ion and OH⁻ as a function of the new concentration of H⁺ => [OH⁻] = Kw/[H⁺] = 1 x 10⁻¹⁴/1.22 x 10⁻⁵ = 8.2 x 10⁻¹⁰M.
Hope this helps. :-)
A potential energy diagram is shown. What is the activation energy of this reaction?
a. 50 kJ
b. 100kJ
c. 150kJ
d. 200kJ
Answer: a. 50 kJ
Explanation: good luck
How many grams are in 32.2 L of CO2?
Answer:
63.25 grams of CO₂
Explanation:
To convert from liters to grams, we first need to convert from liters to moles. To do this, we divide the liters by 22.4, the amount of liters of a gas per mole.
32.2 / 22.4
= 1.4375 moles of CO₂
Now we want to convert from moles to grams. To do this, we multiply the moles by the molar mass of CO₂. The total molar mass can be found on the periodic table by adding up the molar mass of carbon (12) and two oxygen (32).
12 + 32 = 44
Now we want to multiply the moles by the molar mass.
1.4375 • 44
= 63.25 grams of CO₂
This is your answer.
Hope this helps!
How many moles of O2 are dissolved n 10.0 L of a 0.001 mol dm-3 solution?
Answer:
[tex]0.01molO_2[/tex]
Explanation:
Hello there!
In this case, by considering the definition of molar solution as the moles of solute over volume in liters or cubic meters of solution, we can see that actually 10.0 L of the solution are equal to 10.0 dm³. In such a way, since the concentration is 0.001 mol / dm³, the moles of oxygen that are dissolved turn out to be:
[tex]0.001mol/dm^3 * 10.0dm^3\\\\0.01molO_2[/tex]
Best regards!
How are ionic compounds named?
Answer:
Ionic compounds are neutral compounds made up of positively charged ions called cations and negatively charged ions called anions.
Explanation:
For binary ionic compounds (ionic compounds that contain only two types of elements), the compounds are named by writing the name of the cation first followed by the name of the anion.
when the energy is released what happens to the energy of the system
Answer:
Whether a chemical reaction absorbs or releases energy, there is no overall change in the amount of energy during the reaction. That's because energy cannot be created or destroyed. This is the law of conservation of energy.
2C10H22 + 3102
20CO2 + 22H2O
What mass of O2 is needed to react completely with 7.5 grams of C10H22?
Answer:
2c11h21
Explanation:
Which of the following equations correctly describes how to calculate net income? a. net income = (cost of goods sold) - (net sales) - (operating expenses) b. net income = (operating expenses) - (cost of goods sold) - (net sales) c. net income = (operating expenses) + (cost of goods sold) - (net sales) d. net income = (net sales) - (cost of goods sold) - (operating expenses) Please select the best answer from the choices provided A B C D Mark this and return
Answer:
The answer is D. net income= (net sales) - (cost of goods sold)- (operating expenses).
Explanation:
Which of these are found in eukaryotic cells?
1. nucleoid
2. vacuole
3. mitochondria
4. Golgi apparatus
O A. 1, 3, 4
O B. 1, 2,4
O C. 2, 3, 4
O D. 1, 2, 3
Answer:
C
Explanation:
nucleoid is prokaryotic
Answer:
mitochondria is found in eukaryotic cells.
If you picked up a hot coffee mug with lots of thermal energy using your hand, where will the thermal energy transfer to?
Answer:
It will go to your hand.
Explanation: If you touch a hot cup/mug you'll most likely burn yourself, so it would probably go to your hand.
A chemist prepares a solution of silver(I) nitrate AgNO3 by measuring out 62.3μmol of silver(I) nitrate into a 50.mL volumetric flask and filling the flask to the mark with water.
Calculate the concentration in /molL of the chemist's silver(I) nitrate solution. Be sure your answer has the correct number of significant digit
*please write the answer without any files disturbance*
Answer:
0.0012 mol/L.
Explanation:
From the question given above, the following data were obtained:
Number of mole of AgNO₃ = 62.3 μmol
Volume = 50 mL
Molarity of AgNO₃ =?
Next, we shall convert 62.3 μmol to mole. This can be obtained as follow as follow:
1 μmol = 10¯⁶ mole
Therefore,
62.3 μmol = 62.3 × 10¯⁶
62.3 μmol = 62.3×10¯⁶ mole
Next, we shall convert 50 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
50 mL = 50 mL × 1 L / 1000 mL
50 mL = 0.05 L
Finally, we shall determine the concentration of AgNO₃ in mol/L as follow:
Number of mole of AgNO₃ = 62.3×10¯⁶ mole
Volume = 0.05 L
Molarity of AgNO₃ =?
Molarity = mole /Volume
Molarity of AgNO₃ = 62.3×10¯⁶ / 0.05
Molarity of AgNO₃ = 0.0012 mol/L
Thus, the concentration of AgNO₃ is 0.0012 mol/L
A substance has a percent composition of 17.55% Sodium, 39.70%
Chromium, and 42.75% Oxygen. What is the empirical formula of the
substance? *
Need help anyone plz :)
Cr2Na2O7
Sodium Dichromate
The concentration of H3AsO3 in a solution is determined by titrating it with a 0.1741 M Ce4+ solution. The balanced net ionic equation for the reaction is: 2Ce4+(aq) + H3AsO3(aq) + 5H2O(l) 2Ce3+(aq) + H3AsO4(aq) + 2H3O+(aq) In one experiment, 18.68 mL of the 0.1741-M Ce4+ solution is required to react completely with 30.00 mL of the H3AsO3 solution.
Calculate the concentration of the H3AsO3 solution.
Answer:
0.0542 M
Explanation:
Let;
CA = concentration of Ce4+ solution = 0.1741 M
VA = volume of Ce4+ solution = 18.68 mL
CB = concentration of H3AsO3 = ?
VB = volume of H3AsO3 = 30.00 mL
NA = Number of moles of Ce4+ solution = 2
NB = Number of moles of H3AsO3 = 1
From;
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CB = CAVANB/VBNA
CB = 0.1741 * 18.68 * 1/30.00 * 2
CB = 0.0542 M
Lily is doing a science experiment with a substance in a sealed jar. At first,
the substance's molecules are moving around each other. What will
happen to Lily's substance if she transfers energy into the substance and
causes a phase change? After the phase change, the substance's
molecules will move...'
faster, and the substance will be a liquid.
faster, and the substance will be a gas.
slower, and the substance will be a solid.
slower, and the substance will be a liquid.
Answer:
Faster, and the substance will be a gas.
Explanation:
I'm quite not sure with it. But, I've tried my best. Since maybe the substance is liquid