Which of the following setups will correctly convert 36.45 grams of sodium to moles of sodium?

Answer:

90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on eight comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you.!

Explanation:

Answer:

The internal energy is the total amount of kinetic energy and potential energy of all the particles in the system. ... When the substance melts or boils, energy is put in to breaking the bonds that are holding particles together, which increases the potential energy.

Explanation:

Answer:

Kindly check the explanation section.

Explanation:

PS: Note that enough information are not being provided and we do not know the experiment this question is all about. However, some information are provided below which is going to aid in solving when you get access to the main question.

The determination of the heat transferred from one substance to another is one of the important aspect in science. The method in which this heat is being measured is known as calorimetry and the instrument used in this technique is known as the calorimeter.

When the energy content of a snack is needed to be calculated, there is the need use a type of instrument known as bomb calorimeter.

Most of the calorimeters used by students are not so expensive like the used in the industries. Most of these calorimeters operates at a constant pressure while the Bomb Calorimeter operates at constant volume.

Answer:

A 0.60 mol sample of PCl 3 (g) and a 0.70 mol sample of Cl 2 (g) are placed in a previously evacuated 1.0 L container, and the reaction represented

Explanation:

Answer:

625.46 °C

Explanation:

We'll begin by converting 19 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

T(°C) = 19 °C

T(K) = 19 °C + 273

T(K) = 292 K

Next, we shall determine the Final temperature. This can be obtained as follow:

Initial volume (V₁) = 3.25 L

Initial temperature (T₁) = 292 K

Final volume (V₂) = 10 L

Final temperature (T₂) =?

V₁/T₁ = V₂/T₂

3.25 / 292 = 10 / T₂

Cross multiply

3.25 × T₂ = 292 × 10

3.25 × T₂ = 2920

Divide both side by 3.25

T₂ = 2920 / 3.25

T₂ = 898.46 K

Finally, we shall convert 898.46 K to celsius temperature. This can be obtained as follow:

T(°C) = T(K) – 273

T(K) = 898.46 K

T(°C) = 898.46 – 273

T(°C) = 625.46 °C

Therefore the final temperature of the gas is 625.46 °C

Answer:

1, 3, and 4

Explanation:

I'm guessing, but those make the most sense

Answer:

3 and 4

Explanation:

Answer:

D

Explanation:

Answer:

(14.5 mol) x (6.022 x 10^23 atoms/mol) = 8.73 × 10^24 atoms

Explanation:

pls mark brainliest

Answer:

0.0432 atm

Explanation:

Step 1: Given data for when the balloon is full

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = -10.0°C + 273.15 = 263.2 K

Step 3: Calculate the pressure of He in the balloon

We will use the ideal gas equation.

P × V = n × R × T

P = n × R × T/V

P = 10.0 mol × (0.0821 atm.L/mol.K) × 263.2 K/5000.0 L = 0.0432 atm

Our balanced equation is Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag.

The coefficients of reactants tell us that 1 mole of Cu reacts per 2 moles of AgNO₃. We want to know the mass of Cu that will react with a mass (specifically, 420 g) of AgNO₃. To start, we must convert the mass of AgNO₃ to moles of AgNO₃:

Moles of AgNO₃ = Mass of AgNO₃ ÷ Molar Mass of AgNO₃

Moles of AgNO₃ = 420 g AgNO₃ ÷ 169.88 g AgNO₃/mol AgNO₃

Moles of AgNO₃ = 2.47 moles of AgNO₃.

Since only half as many moles of Cu is consumed in reacting with the AgNO₃, the number of moles of Cu that will react with 2.47 moles of AgNO₃ would be half of 2.47, or 1.24 moles of Cu.

Finally, we can convert the molar quantity of Cu to mass by multiplying the number of moles of Cu by the molar mass of Cu:

Mass of Cu = Moles of Cu × Molar Mass of Cu

Mass of Cu = 1.24 moles Cu × 63.546 g Cu/moles Cu

Mass of Cu = 78.6 g of Cu

So, 78.6 grams of Cu are needed to react with 420 g of AgNO₃.

---

The way to solve the second question is identical to how we solved the first question. The coefficient of Ag is 2, so the molar ratio between the Ag produced and Cu reacted is 2:1. In other words, half as many moles of Ag produced is equivalent to the number of moles of Cu that was consumed in the reaction.

So, as we did with the first question, we first convert the mass of the Ag produced to moles. The molar mass of Ag is 107.8682 g/mol. Dividing 98.5 g of Ag by the molar mass gives us 0.913 moles of Ag produced. The number of moles of Cu that reacted to produce 0.913 moles of Ag would be 0.913/2 = 0.457 moles of Cu.

Lastly, multiplying 0.457 moles of Cu by the molar mass of Cu, we obtain the mass of Cu (in grams) that reacted: 0.457 × 63.546 = 29.0 g of Cu.

So, 29.0 grams of Cu reacted to produce 98.5 grams of Ag.

Note: I have provided the answers for both questions to three significant figures; while 420 technically has only two significant figures, it would seem consistent to treat it as having three since 98.5 has three digits and three significant figures.

Answer:

Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other

Hope it helps

Please mark me as the brainliest

Thank you

The correct name of HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.

Acids are those substances in which carboxylic acid (-COOH) is present and pH value of acids falls in the range of 0 to 6.9.

Name of the HNO₂ compound is nitrous acid, of HI is hydroiodic acid and of H₃PO₄ is phosphoric acid.

Hence name of the HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.

To know more about acids, visit the below link:

https://brainly.com/question/24375075

#SPJ2

Answer: HNO2 nitrours acid

              HI Hydroiodic acid

               H3PO4 phosphoric acid

Explanation: edu

Answer:

1+

Explanation:

Sodium has one valence electron. When it bonds with a nonmetal like sulfur, it gives up that electron to become a positively charged ion (cation) with a charge of 1+.

Answer:

Single replacement reaction

Explanation:

A single replacement reaction, sometimes called a single displacement reaction, is a reaction in which one element is substituted for another element in a compound.

Answer:

A, D, F

Explanation:

Cold currents usually go along with Earth's rotation while the warm waters are subjected to the coriolis effect and go in a direction against Earth's rotation.

Answer:

c

Explanation:

Answer:they were poisoned with powdered caffeine (C)

Explanation:

I just took the test! And got all the points for this question :) hoped I could help

Answer:

The dependent variable is the bushes of potatoes while the soil is an independent variable.

Explanation:

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

Cause and effect can be defined as the relationship between two things or events in which an occurrence one (cause) leads to the occurrence of another (effect).

In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated.

Hence, the dependent variable is the bushes of potatoes while the soil is an independent variable.

Answer:

not bang your head

Explanation:

Answer:

focus on your surroundings

Answer:

organelle are located in da cytoplasm of eukaryotic and prokaryotic cells

Hope this helps!

Answer: As4010 is the Molecular Formula of Arsenic oxide. its Molecular Weight is 459.68.

hope its help you

have a great day keep smiling be happy stay safe.

Answer:

the first cause eye color is genetic

Answer: The particles need energy to overcome the attractions between them. As the liquid gets warmer more particles have sufficient energy to escape from the liquid. Eventually even particles in the middle of the liquid form bubbles of gas in the liquid.

Explanation:

Answer:

c

Explanation:

I looked the answer up it said it was geosphere

Answer:

the answer is geosphere

Explanation:

i hope it helps you

Answer:

0.125 moles

Explanation:

2.8 litres is equivalent to 2.8dm³

At STP,

1 mole = 22.4 dm³

x mole = 2.8 dm³

Cross multiply

22.4x = 2.8

Divide both sides by 22.4

x = 2.8/22.4

x = 0.125

Answer:

Estuaries are bodies of water where rivers meet the sea or a large lake. Rivers spread out and slow when they meet the sea, creating unique conditions that are not found elsewhere. They provide homes for diverse wildlife, including popular fish species.