The best explanation for why the water drop does not slide off the sloped plane is that water is both cohesive and adhesive in nature which means, The polar water molecules cause the surface to become temporarily charged, causing adhesion.
What is Polar water?The water with a +ive charge on the hydrogen pole and -ve charge on the Oxygen pole is termed as the polar water.
Cohesive:It is the ability of the water molecules (H2O) to be attracted by each other that means by another water molecules. This ability of water is termed as Cohesiveness of water.
To know more about Cohesive visit
https://brainly.com/question/29665270
#SPJ4
The temperature at 9 p.m. was -4 degrees Fahrenheit, which is one-third of the temperature at midnight. What was the temperature at midnight? Write an equation that could represent this situation.
Temperature at midnight would be -12 degrees Fahrenheit and is determined using the equation that represents this situation i.e., T/3 = -4.
In mathematics, an equation is a representation of a formula or statement that illustrated an equality relationship of two expressions. The expressions are connected with an equals sign. Solving an equation containing variables involves calculating values of the variables that make the equality true. The variables for which the equation has to be solved are also called unknowns, and the values of the unknowns that satisfy the equality are called solutions of the equation.
Based on the information provided, as the temperature at 9am is -4 and it is the 1/3 of the temperature at midnight T, the equation would be:
1/3* Midnight temperature = 9am temperature
1/3*T = -4 or T/3 = -4
Solving the equation,
T = 3*-4 = -12.
Learn more about Equation:
https://brainly.com/question/16863577
#SPJ4
question mode multiple choice question calculate the enthalpy change when 1.75 moles of diethyl ether changes from the liquid to the gas phase if δhovap
the enthalpy change when 1.75 moles of diethyl ether changes from the liquid to the gas phase is ΔH= 47.775 KJ
What is enthalpy?
Enthalpy is an energy-like attribute or state function; it has the dimensions of energy (and so is measured in joules or ergs), and its value is controlled wholly by the system's temperature, pressure, and composition, rather than its history.
What is enthalpy with example?
This Enthalpy is equal to the sum of the internal energy of such a system with the constant. You must realise that the forms of energy fluctuate, while Enthalpy remains constant. For example, when water freezes into ice, some energy is used in the process, which is referred to as Enthalpy.
Here ΔH°vap for die ethyle ether = 27.3 KJ/mol
The enthalpy change when 1.75moles of die ethyle ether charges from the liquid to the gas phase will be,
ΔH = (27.3 × 1.75)KJ
ΔH= 47.775 KJ
Hence47.775 KJ is a correct answer.
To know more about enthalpy follow link
https://brainly.com/question/13996238
#SPJ4
A electrolytic cell is set up as was done in this experiment but with a different metal. An average current of 144.2 mA is delivered for 16 minutes and 39 seconds. The cathode gains 0.1427 g in mass. If there are two moles of electrons transferred per mole of the metal, what is the molar mass of the metal?
If there are two moles of electrons transferred per mole of the metal, 191.1g/mol will be the molar mass of the metal.
Since formula for faraday's law of electrons is,
Since m = 0.1427g,
L=144.2
= 144.2 *(1A/1000mA)
= 0.1442,
t = 16min39
= 16min*(60/1min)
= 999 second
Z = 2e-mol
by substituting all the values in faraday's law of electrons formula,
0.1427 g = (0.1442*999*M*1/96485*2)
molar mass M = (0.1427g*96485*2/0.1442*999*1)
M = 191.1538 g/mol = 191.1g/mol
Therefore molar mass of metal will be 191.1g/mol.
learn more about molar mass here
https://brainly.com/question/22997914
#SPJ4
what is the predominant intermolecular force in h2nnh2? group of answer choices ionic bonding dipole-dipole attraction london-dispersion forces ion-dipole attraction hydrogen bonding
The predominant intermolecular force in H₂NNH₂ is hydrogen bonding.
Hydrogen bonding intermolecular forces are present in compounds which have at least one hydrogen atom directly bonded to either nitrogen, oxygen or fluorine atom.
Hydrogen bonding is the strongest intermolecular force of attraction.
In hydrazine there are 4 hydrogen atoms bonded directly to two nitrogen atoms. Hence, hydrazine has hydrogen bonding intermolecular force present.
Use of hydrazine
Hydrazine is used as a corrosion inhibitor in cooling water reactor. It is also used in the process of electrolytic plating of metals on plastic and glass. One of the main use of hydrazine is in the manufacturing of agricultural chemicals.
Learn more about hydrazine from the link below.
https://brainly.com/question/8980209
#SPJ4
Help me asap, due today
1. The equation is not balanced. The balanced equation is [tex]4NH_3 + 5O_2 --- > 4NO +6 H_2O[/tex]
2. The equation is balanced.
3. The equation is not balanced. The balanced version is [tex]2H_2O --- > 2H_2 + O_2[/tex]
Balancing chemical equationsA balanced chemical equation usually has the same number of atoms of different elements in the reactants and the products, even though the forms of the atoms might have changed.
Consider the first equation: [tex]NH_3 + O_2 --- > NO + H_2O[/tex]
The number of hydrogen atoms is not balanced. Thus, the equation that shows balanced atoms of different elements would be: [tex]4NH_3 + 5O_2 --- > 4NO +6 H_2O[/tex]
Consider the second equation: [tex]N_2 + 3H_2 -- > 2NH_3[/tex]
There are 2 atoms of nitrogen in the reactants and there are also 2 in the product. The number of hydrogen atoms is 6 in the reactants and 6 in the products. Thus, it is a balanced equation.
Consider the third equation: [tex]2H_2O --- > H_2 + O_2[/tex]
There are 4 hydrogen atoms in the reactant and only 2 in the products. The balanced equation would be: [tex]2H_2O --- > 2H_2 + O_2[/tex]
More on balancing chemical equations can be found here: https://brainly.com/question/28294176
#SPJ1
What are the units remaining after the conversions below?
[need help asap please]
how calculate ratio product reactants given inital concentration and percent forward backward reaction
The ratio of product to reactants is Equilibrium constant.
What is equilibrium constant?
The equilibrium constant is the ratio of products to reactants at equilibrium. It is denoted by K
Fora given reaction:
Reactants ⇌ Products
When the forward and reverse responses occur at the same pace, their effects cancel out. At this stage, a process is said to be in chemical equilibrium.
For above reaction,
Ratio of product to reactants or equilibrium constant, is given by:
K = [tex]\frac{products}{reactants}[/tex]
Why should the rate of forward and reverse reaction become equal in equilibrium?
If the rate of forward reaction exceeds the rate of backward reaction, reactants are being converted into products. The forward reaction is preferable. The quantity of reactants is decreasing while the quantity of products is increasing. As a result, it is not in equilibrium.
When the rate of backward reaction exceeds the rate of forward reaction, products become reactants. The reverse reaction is preferred. The quantity of reactants is increasing while the quantity of products is decreasing. As a result, it is not in equilibrium.
There should be no change in the quantities of reactants or products at equilibrium, creating the impression that nothing is happening. Forward and backward reflexes must have the same rate to meet this criteria.
The ratio of product to reactants is Equilibrium constant.
To know more about equilibrium constant, check out:
https://brainly.com/question/3159758
#SPJ4
Are the groups of electrons around carbon atom b in propene bonding or nonbonding?.
the groups of electrons around carbon atom b in propene is bonding.
They are not nonbinding because bond formation involves all four valence e. They are bonding because they have all formed a bond. Because this C is sp2 hybridised, the electron geometry of the carbon atom B in propene is trigonal planar. Because propene's overall geometry is trigonal planar, the C-C-C bond angle is 120°. Nonbonding electrons are assigned to the atom they are located on. Non-bonding electron pairs are those on an individual atom that are not shared with another atom.Bonding electrons are distributed equally among the bonded atoms. Bonding electron pairs are electrons that are shared by the central atom and any atom to which it is bonded.
Learn more about bonding electrons here:
https://brainly.com/question/13190131
#SPJ4
A flexible plastic bag at standard pressure and temperature is heated to 350. K. If the final volume is 2.75 L, calculate
the initial volume
Answer:
2.15 L
Explanation:
We can use the combined gas law to answer this:
P1V1/T1 = P2V2/T2
where P, V, and T are the Pressure, Volume, and Temperature (in Kelvin) for the initial (1) and final (2) states. We may assume the pressure remains the same between both states (1 atmosphere. or standard pressure). Ci=onvert the Celcius temperatures into Kelvin by add 273.15 to the C value.
We want the original volume, V1. Rearrange the equation to solve for V1:
V1 = V2(P2/P1)(T1/T2)
Note how the pressure and temperature variables are formatted: as ratios. This allows us to more easily visualize how the changes in both will impact the value of V1. A rise in temperature between T1 and T2 would mean that the ratio (T1/T2) would be less than 1, so the initial volume, V1, would be smaller than the final volume, V2. The raio of the pressures P2/P1 simply reduces to 1, since they are the same. So even before we get our a calculator, we can predict that V1 will be smaller than V2.
Enter the data: V1 = (2.75L)*(1)*(273.15K/350K)
The pressure and temperature units cancel, leaving only voulume (Liters).
V1 = 2.15L
This is less than 2.75L, which is what we already expected. The initial volume is 2.15 L.
which reaction is the formation reaction for cao(s) ? in other words, which equation has a δH∘rxn value equal to the δH∘f value for cao(s) 2ca(s) o2(g)⟶2cao(s) ca(s) 12o2(g)⟶cao(s) cao(s)⟶ca(s) 12o2(g) ca2 (aq) o2−(aq)⟶cao(s) 2cao(s)⟶2ca(s) o2(g)
The reaction Ca(s) + 1/2O₂(g) ⇒CaO(s) in which ΔH⁰rxn value equal to the ΔH⁰f value for cao(s).
In above reaction
calcium and oxygen react to form calcium oxide. In this reaction one mole of calcium oxide solid formed so the enthalpy change during this is reaction is considered as enthalpy of formation.
The enthalpy change that takes place when 1 mole of a substance is created from its component elements in their standard states is known as the standard enthalpy of formation.
Hence, one mole of cao is formed from a constituent atom from their elemental state is the enthalpy of formation.
To know more about Enthalpy of formation.
https://brainly.com/question/28302300
#SPJ4
tell me what you know about the intermolecular forces in water. tell us what you know about the intermolecular forces in ethanol (ch3ch2oh). how does the strength of the imfs in water compare to the strength of the imfs in ethanol? enter response here...
Kinds of intermolecular forces are present in a mixture of ethanol (CH3CH2OH) and water are dispersion intermolecular forces
Ethanol or ethyl alcohol is a colorless, volatile, and flammable liquid that soluble in water. Its chemical formula is C2H6O or C2H5OH or CH3CH2OH.
Intermolecular forces that mediate interaction between molecules, including attraction forces or repulsion attraction that act between molecules and other types of neighboring particles such as atoms or ions. There are three major types of intermolecular forces: London dispersion force, dipole-dipole interaction, and ion-dipole interaction
London dispersion forces is the force that hold molecules together in the liquid, solid and solution phases are quite weak. London dispersion force is the weakest of the intermolecular forces. It is the force between two nonpolar molecules
Dipole -dipole interactions between two polar molecules occurred when the partial charges formed within one molecule attracted to an opposite partial charge in a nearby molecule.
The ion-dipole interaction is occurred when an ion encounters a polar molecule.
Hydrogen Bonding is the attraction between two atoms that already participate in other chemical bonds.
Therefore, CH3CH2OH have H-bond intermolecular forces and dipole intermolecular forces and dispersion intermolecular forces. There's no ionic interaction because we don't have metal attached to a nonmetal. For the mixture of ethanol (CH3CH2OH ) and water, it can very easily become a homogeneous mixture because the two liquids are miscible and soluble in all proportions.
To know more about intermolecular forces, refer: https://brainly.com/question/9328418
#SPJ4
What caused the rate of discovery of elements to increase after 1700
for a c-br bond that is oriented with the bromide to the right of the carbon, where does the nucleophile have to attack from?
The nucleophile has to attack from: A nucleophilic attack often occurs when an electron-rich species (the nucleophile) "attacks" an electron-deficient species (the electrophile, usually a carbocation), forming a new bond between the nucleophile and the carbocation.
Nucleophile (Nuc): A reactant that offers a couple of electrons to form a brand-new covalent bond (i.e. a Lewis base). A nucleophile that shares an electron pair with a proton is generally known as a Bronsted-Lowry base or just a base. Hydroxide ion as a nucleophile in an SN2 reaction.
In chemistry, a nucleophile is a chemical species that paperwork bonds by using donating an electron pair. All molecules and ions with a free pair of electrons or at least one pi bond can act as nucleophiles. due to the fact nucleophiles donate electrons, they're Lewis bases.
Learn more about Nucleophile here:
https://brainly.com/question/14052597
#SPJ4
All matter in motion has a wavelength. Why don’t we feel the effects of our own wavelengths? Answer in one complete sentence.
We have a large mass thus our associated wavelength is small for humans.
What is the DeBroglie Wavelength?We know that the wavelength has to do with the distance that is covered by a wave. This would normally refers to the horizontal distance. According to the wave particle duality theory that was put forward by the man Louis DeBroglie, he said that when matter is in motion, it must have an associated wavelength.
We know from the theory that;
λ = h/p
λ = wavelength of the object
h = Plank's constant
p = momentum of the objects.
We have to note that the momentum is the product of the mass and the velocity of the object.
We now know that as the mass of the object increases, the velocity becomes infinitesimal and may not be felt.
Learn more about momentum:https://brainly.com/question/904448
#SPJ1
Please help me on this
And I will give brainliest
The reducing agent belongs in the left (oxidation) circle of the given Venn diagram. Therefore, option (1) is correct.
What is a reducing agent?A substance that loses its electrons to other substances in a redox reaction and gets oxidized to a higher valence state is known as a reducing agent.
A reducing agent can be described as one of the reactants of an oxidation-reduction reaction that can reduce the other reactant by donating its electrons to the reactant.
If the reducing agent does not give away its electrons to other substances in a reaction, then the reduction cannot occur. For example, in the following chemical reaction;
[tex]H_2(g) + F_2(g) \longrightarrow 2HF(g)[/tex]
Hydrogen gas acts as a reducing agent because it gives out its electrons to fluorine, which permits fluorine to be reduced.
Learn more about reducing agent, here:
https://brainly.com/question/2890416
#SPJ1
the empirical formula of certain hydrocarbon is ch2. when 0.125 moles of this hydrocarbon is completely burned with excess oxygen, it is observed that 8.4 literls of co2 gas are produced at stp. what is the molecular formula of the unknown hydrocarbon
C₃H₆ is the molecular formula of the compound.
It is given that the empirical formula for a certain compound is CH₂. In addition to that, the moles of the hydrocarbon is 0.125 moles and combustion gave 8.4 L of CO₂ in STP. To find the molecular formula for the unknown compound, first, we need to balance the reaction, of the combustion
3CH₂ + 3O₂ ------> 2CO₂+ 2H₂O
The number of moles of CO₂ is given as follows
= 8.4/22.4
= 0.375 moles of CO₂
The next step is to convert the moles of CO₂ to CH₂ using the ratio in the balanced equation. By doing so we get,
0.375 moles of CO₂/1 x (2moles of CH₂/2moles of CO₂)
= 0.375 moles of CH₂.
The molecular formula of any compound a multiple of the empirical formula. By dividing the empirical moles by the molecular moles we get, the molecular formula of the compound.
= 0.375/0.125
= 3
By multiplying this value with the empirical formula we get C₃H₆. This is the molecular formula of the given compound
To know more about empirical formulas, click below:
https://brainly.com/question/1603500
#SPJ4
classify each of the compounds as soluble or not soluble: potassium carbonate chromium(iii) iodide iron(ii) nitrate
potassium carbonate is not soluble, chromium is soluble in water, iodide iron soluble in ether alcohol and ammonia and nitrate is soluble in water.
With the chemical formula K2CO3, potassium carbonate is an inorganic substance. It is a white salt that may be dissolved in water. It is effervescent and frequently manifests as a wet or soggy solid. Glass and soap manufacture are the two main industries that utilise potassium carbonate. For the creation of glass and soap, potassium carbonate is frequently utilised.
Common nitrate ingredients in explosives and fertilisers. Water is a solvent for almost all inorganic nitrates. Bismuth oxynitrate is one type of insoluble nitrate. Similar to NO, nitrate has physiological effects on the body in a variety of systemic activities, such as lowering blood pressure, preventing platelet aggregation, and protecting blood vessels [3, 37].
learn more about potassium carbonate here
https://brainly.com/question/27899114
#SPJ4
at what temperature in k will 0.760 moles of oxygen gas occupy 8.00 l and exert 2.60 atm of pressure?
At 333K temperature 0.760 moles of oxygen gas occupy 8.00 L and exert 2.60 atm of pressure.
What is ideal gas law?
The relationship between a gas's pressure P, volume V, and temperature T in the range of low pressures and high temperatures, when the gas's molecules move virtually independently of one another, is known as the ideal gas law, also known as the perfect gas law.
Given:
Number of mole (n) = 0.760 mole
Volume of oxygen (V) = 8.00 L
Pressure (P) = 2.60 atm
Temperature (T) =.?
We know, Gas constant (R) = 0.0821 atm.L/Kmol
Using the ideal gas equation we get:
PV = nRT
2.6 x 8 = 0.76 x 0.0821 x T
So,
T = (2.6 x 8) /(0.76 x 0.0821 )
T = 333 K.
Hence, the temperature is 333 K.
To know more about ideal gas law, check out https://brainly.com/question/25290815
#SPJ4
A naturally occurring sample of an element contains only two isotopes. The first isotope has a mass of 68.9255 amu and a natural abundance of 60.11%. The second isotope has a mass of 70.9247 amu. Use this information to answer the following questions. Calculate the atomic mass of the element, to 4 significant figures. Include the unit, amu, in your answer below. Give the full name for the element that exists as these two isotopes. Explain how you determined the element name in the above question.
The name of the element is Gallium and the symbol is Ga.
Solution:
Abundance of second isotope = (100 - 60.11) = 39.89 %
Atomic mass of element = 68.9255 * (60.11 / 100) + 70.9247 * (39.89 / 100) = 69.72 AMU
The atomic mass of an element is 69.72 AMU which is matched with the atomic mass of gallium.
so,
The name of the element is Gallium and the symbol is Ga.
The atomic mass of an element is the weighted average of the atomic masses of the naturally occurring isotopes of that element. Atomic mass calculations use the abundance ratios of each isotope. Isotopes are members of a family of elements that all have the same number of protons and different numbers of neutrons.
Learn more about The atomic mass here:- https://brainly.com/question/338808
#SPJ4
na and k both use to passively diffuse across the plasma membrane. leak channels voltage-gated channels facilitated diffusion exocytosis carrier-mediated transport
Na and K both use to passively diffuse across the plasma membrane to leak channels.
The membrane that isolates a cell's interior from its external environment is termed the plasma membrane, sometimes known as the cell membrane, and it can be found in every type of cell. On the exterior of both bacterial and plant cells, the plasma membrane is connected by a cell wall. The cell is shielded from its surroundings by the plasma membrane, which also controls cellular movement and sends messages. According to the fluid mosaic model, the plasma membrane is made up of a patchwork of phospholipids.
Ion channels that are not gated are those that are constantly open. Because they simply permit ions to pass through the channel without any impedance, these channels are sometimes known as leak channels. Due to the high permeability of the neuron cell membrane to potassium ions, the neuron experiences significant potassium leakage through potassium leak channels.
learn more about leak channels here
https://brainly.com/question/11488192
#SPJ4
different steps of the oxidative decarboxylation of pyruvate by the pyruvate dehydrogenase pdh complex are given. place these five steps in the correct order. note that thiamine pyrophosphate, tpp , is sometimes called thiamine diphosphate, tdp . you are currently in a ranking module. turn off browse mode or quick nav, tab to move, space or enter to pick up, tab to move items between bins, arrow keys to change the order of items, space or enter to drop.
The five correct steps on oxidative decarboxylation of pyruvate are:
Pyruvate reacts with TPP and is decarboxylated, forming hydroxyethyl-TPP.The lipoamide arm of E2 moves to the active site of E1, enabling the transfer of the acetyl group to the lipoamide.The acetyl lipoamide arm of E2 moves to the active site of E2, where the acetyl group is transferred to CoA, forming acetyl-CoA and the reduced form of lipoamide.The lipoamide arm move to the active site of E3, where the reduced lipoamide is oxidized by FAD, forming the active lipoamide and FADH2.FADH2 is reoxidized to FAD, reducing NAD+ to NADH.These steps are correct in the process of oxidative decarboxylation of pyruvate, because they describe the complete process of pyruvate decarboxylation, from the initial conversion of pyruvate to hydroxyethyl-TPP, to the transfer of the acetyl group to CoA, to the reoxidation of FADH2. This sequence of steps ensures that the energy from the oxidation of pyruvate is captured and stored as energy-rich molecules, such as NADH and acetyl-CoA.
What does the oxidative decarboxylation process consist of?
Is a type of metabolic reaction in which a carboxylic acid is converted into an aldehyde, alcohol, or ketone by the addition of an oxidizing agent, such as oxygen or a metal compound.
This reaction involves the removal of a carboxyl group (COOH) and the addition of an oxygen atom (O). The resulting product contains either an aldehyde, alcohol, or ketone group, depending on the starting material.
Learn more about the oxidative decarboxylation process:
https://brainly.com/question/14143897
#SPJ4
calculate the theoretical yield of acetylsalicylic acid from 2.01 g of salicylic acid assuming excess acetic anhydride.
The theoretical yield of acetylsalicylic acid from 2.01 g of salicylic acid assuming excess acetic anhydride is 0.002.
A mole is a unit of measurement used in chemistry to count molecules based on their mass. You can determine the initial amounts of oxygen and glucose by counting the moles of each substance.Examine the reaction's balanced equation. You can determine the ratio of molecules required for a reaction by looking at the coefficients in front of each molecule.One of the reactants will typically be consumed before the others in chemical reactions. The limiting reactant is the one that exhausts itself first. The theoretical yield and the duration of the chemical reaction are constrained by this limiting reactant.To study more about balanced equation -
https://brainly.com/question/12192253
#SPJ4
a 433 l tank holds helium gas at -48 °c with a pressure of 1.24 atm. how many moles of gas are in the tank?
Number of moles of gas are in the tank is 0.287 mole.
Pressure is the force implemented perpendicular to the floor of an object in step with unit location over which that force is shipped. Gauge strain is the strain relative to the ambient strain. diverse units are used to specific strain.
Strain is described as force implemented consistent with unit area. Mathematically it's far given by, P=FA. wherein F is the force acting perpendicular to the floor vicinity A. the usual unit of strain is the pascal (Pa), equal to at least one newton in keeping with meter squared (N/m 2 ).
Calculation:-
volume = 433 L
Pressure = 1.24 atm
T = -48 °c
= 273 - 48 K
= 225 K
PV = nRT
n = PV/RT
= 1.24 × 433 / 8.314 × 225 K
= 0.287 mole
Learn more about Pressure here:-https://brainly.com/question/28012687
#SPJ4
Chemical reactions occur when molecules or atoms collide in a way that the bonds between atoms break and new bonds form. Breaking the bonds of the reactants requires energy, whereas bond formation releases energy.
True , Energy is released during bond formation, whereas energy is required to break the bonds between the reactants.
What do chemical bonding mean?Chemical bonds maintain the interconnectedness of molecules' atoms.. Positively charged subatomic particles and electrons with negative charge interact electrostatically to form bonds. A liquid forms gas bubbles when it reaches its boiling point, which rise to the surface and then burst into the air.
What are the various forms of bonds in chemistry?Chemical bonds are formed when the atoms in a compound's molecule are brought together and kept together by a powerful combining force. Ionic and covalent bonds are the two different types of chemical bonds.
To know more about bonds visit :
https://brainly.com/question/10777799
#SPJ4
for the reaction shown, draw the major organic product and select the correct iupac name for the organic reactant. the starting material is a 4 carbon chain with a double bond between carbons 1 and 2. there is a methyl substituent on carbon 2. the alkene reacts with h c l to give the product.
(C5H11) n-Pentyl is the major product of 4 carbon chain with a double bond between C1 and 2. there is a methyl(CH3) substituent on C 2. the alkene (C5H10) reacts with HCL .
What is the IUPAC name of the given reactant in the statement?The IUPAC name of the given reactant in the statement is CYCLOPENTANE.
Solution:As per the given statement:
The starting is a 4 carbon chain with a double bond between C1 and 2. there is a methyl(CH3) substituent on C 2. the alkene (C5H10) reacts with HCL to give the product
Hence,
C5H10 +HCL → C5H11 +Cl2
hence,(C5H11) n-Pentyl is the major product of C5H10 +HCL → C5H11 +Cl2.
To know more about CYCLOPENTANE visit
https://brainly.com/question/622801
#SPJ4
Nuclear decay occurs according to first-order kinetics. How long will it take for a sample of radon-218 to decay from 99 grams to 0. 50 grams? the half-life of radon-218 is 35 milliseconds.
In 2.6*10² ms, a sample of radon-218 will deteriorate from 99 grams to 0.50 grams. The half-life of radon-218 is 35 milliseconds.
How crucial is nuclear power? What is a good nuclear example?The only significant, carbon-free energy resource that the nation can extensively expand to produce significant amounts of power is nuclear energy. When fossil fuels are burned to produce the same number of electricity, nuclear power plants avoid producing a sizable amount of emissions. One of the best instances of nuclear fusion seems to be the sun. Helium is created when hydrogen nuclei combine inside the sun, producing thermal energy which warms the Earth..
Briefing:t = 2.303/R log A₀/A
Hence, R = 0.693/t/2
t = 2.303/0.693*35 log 99/0.5
t = 267ms
= 2.6*10² ms
To know more about Nuclear visit:
brainly.com/question/3992688
#SPJ4
when 0.20 m nh4cl(aq) and 0.20 m naoh(aq) are mixed, the reaction represented by the equation above occurs and a strong smell of ammonia, nh3, is observed. based on this information, which of the following statements is true?
NH4+(aq) and Cl−(aq) are a conjugate acid-base pair.
The above statement is true.
What is a conjugate acid-base pair?
A conjugate acid-base pair consists of two molecules or ions that differ by one proton. The molecule or ion that has lost a proton is the conjugate base, while the molecule or ion that has gained a proton is the conjugate acid. The conjugate acid-base pair shares the same base, but has different numbers of hydrogen atoms.
What is a Chemical reaction?
A chemical reaction is a process in which one or more substances are changed into one or more new substances with different properties. Chemical reactions involve the breaking and forming of chemical bonds, and release or absorb energy in the form of heat, light, or sound.
To know more about conjugate acid-base pair,
https://brainly.com/question/16938292
#SPJ4
to calculate the energy needed to boil water that initially starts in the liquid state below the boiling point, what quantities are needed?
The quantities needed to boil water that initially starts in the liquid state below the boiling point are the mass of the water, the initial temperature of the water, and the specific heat capacity of water.
The energy needed to boil water is specific heat capacity. Specific heat capacity is the amount of heat energy required to rise 1 degree of one kilogram of substance. The formula
Q = m × c × ΔT
ΔT = T - T₀
where
m = the mass of the substance (kg)c = specific heat capacity of the substance (Joule/kg K)ΔT = temperature rise (K)T₀ = the initial temperature (K)T = the final temperature (K)Q = the amount of heat absorbed or released (Joule)The boiling point of water is 100 °C, so we needed to know the mass of water, the initial temperature of the water, and the specific heat capacity of water to calculate the amount of heat energy needed to boil water.
Learn more about specific heat capacity here: https://brainly.com/question/27991746
#SPJ4
a sample of nitrogen occupies 5.50 liters under a pressure of 900 torr at 25oc. at what temperature will it occupy 15.0 liters at the same pressure?
The temperature, at which it occupies 15.0 litres at the same pressure is, 269°C.
What is Temperature?
A temperature is a unit used to represent hotness or coolness on any of a number of scales, including Fahrenheit and Celsius. According to temperature, heat energy will naturally move from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).
What is Pressure?
The definition of pressure is "force applied per unit area." It can be calculated mathematically using P=FA, where F is the force acting perpendicular to surface area A. The pascal (Pa), or one newton per square meter (N/m²), is the common unit of pressure.
Calculations:
At the same pressure,
volume is directly proportional to temperature.
i.e., V ∝ T
⇒V₁/V₂ = T₁/T₂
here, V₁ = 5.5 litres , T₁ = 25°C = 298K
V₂ = 10 litres, T₂ = ?
now, 5.5/10 = 298/T₂
⇒T₂ = 298 × 10/5.5 ≈ 542 K
Temperature in degree Celsius = 542 - 273 = 269°C
Hence, the temperature, at which it occupies 15.0 litres at the same pressure is, 269°C.
To know more about Pressure, check out:
https://brainly.com/question/28012687
#SPJ4
when 65.0 g of ch4 reacts with excess o2, the actual yield of co2 is 92 g. what is the percent yield?
When 65.0g of is burned with enough oxygen, theoretical calculations are amplified by 100%. Divide the reaction's actual yield by its potential value to get the percent yield. The theoretical yield is equal to 100 times the actual yield.
What does a yield of 75% mean?This is the reaction's theoretical yield, or what you would get if it yield 100%. In your situation, it is known that the reaction will generate a percentage of 75%. This basically means that you only receive 75 moles of carbon dioxide for every 100 moles that the reaction may theoretically yield.
How is the yield percentage determined?Improvements to the % yield for chemical production need a lot of time and money. One reaction with a low percent yield can easily result in a significant waste of reactants and excessive expense when complex compounds are synthesized through a number of distinct reactions. The formula percent yield = actual yield/theoretical yield x 100 is used to calculate yield percentage.
to know more about yeild% here:
brainly.com/question/14874139
#SPJ4