Which of the following provides the best explanation for why the water drop does not slide off the inclined plane?
O A The polar water molecules are absorbed by the underlying surface O B The polar water molecules cause the surface to become temporarily charged, causing adhesion
O C The polar water molecules exert strong cohesive forces on one another
O D The polar water molecules are repelled by the nonpolar surface

The mole fraction of ethanol c2h5oh in an aqueous solution that is 46 percent ethanol by mass is 0.25

Mole fraction is the mole of one of the component of the solution divided by the total moles of the solution

Calculating the mole fraction of ethanol,we get

Percentage by weight of ethyl alcohol is 46% which implies in 100 g of this solution is 46 g while the mass of the water will be 54% of 100 g = 54g.

Finding the moles of water and the ethyl alcohol {molar mass of water(H₂O) = 18 and molar mass of ethyl alcohol(C₂H₆O = 46}

Moles = mass/molar mass

moles of ethanol = 46/46 = 1

moles of water = 54/18 = 3

ntotal=1+3=4

Mole fraction of ethanol is:

  Mole of ethanol            =   1/4

   Total mole of solution

Hence, the mole fraction is 1/4 or 0.25

To learn more about mole fraction visit:

brainly.com/question/8076655

#SPJ4

When 1.2 moles of phosphorus trichloride reacts then 1.2 moles of  chlorine is needed.

pcl3+cl2 ->pcl5

1 moles of PCl3 reacts with 1 mole of Cl2 to produce 1 mole of pcl5.

now, if 1.2 moles phosphorus trichloride reacts then same amount (1.2 mole) is needed to make 1.2 mole of phosphorus pentachloride.

When determining how much of a substance there is, the concept of a mole is helpful. When dealing with particles at the atomic (or molecular) level, it is commonly known that even a single grams of a pure element includes an astoundingly high number of atoms. The mole notion is widely utilized in this context. The most common unit of measurement is the "mole," which is a count of many particles.The number 6.02214076*1023, commonly known as the Avogadro constant, is frequently denoted by the letter "NA". Among the elementary entities that can be represented in moles are atoms, molecules, monoatomic and polyatomic ions, as well as other particles (such as electrons).

To know more about  moles visit : brainly.com/question/15209553

#SPJ4

Because carbon establishes four bonds to other atoms, whereas hydrogen and fluorine only form one, the balls used to symbolize these elements have four and oxygen has two holes, respectively.

Fluorine is univalent, which means it can only create one bond with hydrogen, whereas carbon is tetravalent and can establish up to four bonds. As a result, carbon has four pegs while fluorine and hydrogen only have one. Each molecule of HF has one hydrogen atom that may form a hydrogen bond, while the fluorine atom possesses three lone pairs of electrons. The maximum amount of hydrogen atoms can form hydrogen bonds, and each HF molecule will typically form two hydrogen bonds.

learn more about bonds here:

https://brainly.com/question/819068

#SPJ4

Suppose 9.07 g of copper(II) nitrate is dissolved in 100. mL of a 0.70 M aqueous solution of sodium chromate the final molarity of copper(II) cation in the solution will be 0.48 M

The balanced equation is given as :

Cu(NO3)2 + Na2CrO4 = CuCrO4 + 2NaNO3

Number of mol of copper nitrate = mass /molar mass

                                                        = 9.07 g/187.5 g/mol

                                                        = 0.048 mol

mol sodium chromate = molarity x volume (L)

                                      = 0.70 M x 0.100 L

mol sodium chromate = 0.07 mol

so copper nitrate is limiting

So number of mol of copper (II) cation will be 0.048 mol

molarity = mol/volume (L)

              = 0.048 mol / 0.100 L

               = 0.48 M

learn more about copper nitrate here

https://brainly.com/question/12768349

#SPJ4

The following hybridization states are applicable for the various abbreviations displayed:

The number of electron pairs surrounding the core atom in a molecule affects its hybridization state.

The idea of hybridization is an approximation that describes the bonding in some chemical species by mixing atomic orbitals of various energies to generate orbitals of suitable energies that can be employed in chemical combinations.

The number of electron pairs that surround the center atom determines its hybridization state in a molecule.

2 electron pairs result in sp hybridization.

Sp2 hybridization is caused by three electron pairs.

Sp3 hybridization is caused by 4 electron pairs.

Sp3d hybridization is caused by 5 electron pairs.

Sp3d2 hybridization is caused by 6 electron pairs.

Remember that the molecule's core atom is surrounded by both bond pairs (Y) and lone pairs (Z) of electrons.

For more questions like Hybridization click the link below:

https://brainly.com/question/14617950

#SPJ4

35 g al(s) reacts with excess hcl(aq) according to the chemical equation shown above. what is the volume (in l) of h2 gas produced at a temperature of 345 k and a pressure of 1.12 atm?

2Al(s)  + 6HCl(aq) ----------------> 2AlCl3(aq)  + 3H2(g)

3 moles of H2 produced from 2 moles of Al

3*2g of H2 produced from 2*27g of Al

75g of H2 produced from  = 2*27*75/(3*2)   = 675g of Al >>>>answer

2Al(s)  + 6HCl(aq) ----------------> 2AlCl3(aq)  + 3H2(g)

2 moles of Al react with 6 moles of HCl

2*27g of Al react with 6 moles of HCl

4.25g of Al react with = 6mole*4.25g/(2*27g)   = 0.472 moles of HCl

no of moles of HCl  = molarity * volume in L

0.472                   = 5*volume in L

volume in L   = 0.472/5   = 0.0944 L  = 94.4ml >>>>answer

2Al(s)  + 6HCl(aq) ----------------> 2AlCl3(aq)  + 3H2(g)

2 moles of Al react with excess of HCl 3 moles of H2

2*27g of Al react with excess of HCl 3 moles of H2

35g of Al react with excess of HCl = 3*35/(2*27)  = 1.94 moles of H2

n  = 1.94moles

T  = 345K

P = 1.12atm

PV  = nRT

V   = nRT/P

   = 1.94*0.0821*345/(1.12)   = 49.1 L of H2 >>>>answer

part-D

no of moles of Al  = W/G.M.Wt

                          = 125/27   = 4.63moles

no of moles of HCl  = molarity *volume in L

                             = 3.2*2.5   = 8moles

2Al(s)  + 6HCl(aq) ----------------> 2AlCl3(aq)  + 3H2(g)

2 moles of Al react with 6 moles of HCl

4.63 moles of Al react with = 6*4.63/2   = 13.89 moles of HCl is required

HCl is limiting reactant

6 moles of HCl react with excess of Al to gives 3 moles of H2

8 moles of HCl react with excess of Al to gives = 3*8/6  = 4 moles of H2

theoretical yield of H2  = no of moles * gram mola rmass

                                   = 4*2  = 8g

A chemical is any substance that has a described composition. In other phrases, a chemical is continually made up of the identical "stuff." a few chemical compounds occur in nature, such as water.

Learn more chemical here:-

https://brainly.com/question/11231920

#SPJ4

In this equation there's a little mistake, Co never suggests -three kingdoms, therefore, it ought to be + three.

Redox is a kind of chemical response in which the oxidation states of substrate trade. Oxidation is the loss of electrons or a boom inside the oxidation kingdom, whilst discount is the benefit of electrons or a lower in the oxidation nation.

An oxidation-discount redox response is a form of chemical reaction that involves a switch of electrons between species. An oxidation-reduction response is any chemical reaction wherein the oxidation range of a molecule, atom, or ion changes by means of gaining or losing an electron.

The five principal sorts of redox reactions are aggregate, decomposition, displacement, combustion, and disproportionation.

Learn more about redox reactions here:-https://brainly.com/question/21851295

#SPJ4

The ph of 1.00 l of a buffer that is 1.00 m in acetic acid and 1.00 m in sodium acetate after the addition of 0.900 mole of naoh is 5.28.

initial moles of sodium acetate = acetic acid = 1 m * 1 L = 1 moles

[ acetate ] after adding NaOH = 1 mol+ 0.55 mol = 1.55 M

[acetic acid] after adding NaOH = 1 mol - 0.55 mol = 0.45 M

According to Handerson-Hasselblach equation:

PH = Pka + ㏒ [ acetate]/[acetic acid]

when Pka = 4.74

so, by substitution:

∴PH = 4.74 + ㏒[1.55/0.45]

∴ PH = 5.28

To learn more about sodium acetate  visit:https://brainly.com/question/12924347

#SPJ4

The NaOH 31.5 ml of 0.0833 M NaOH will be required to 25.0 mL of 0.105 M HCl.

Given

M1= 0.105 M HCl

V1 = 25 ml HCl

M2 = ?

V2 = 31.5 ml NaOH

From concentration calculation

M1V1 = M2V2

0.105 M x 25 ml = M2 x  31.5 ml

M2 = 0.0833 M NaOH

Titration is a technique for determining an unknown solution's concentration. Titrating refers to a solution's known concentration. The burette is filled with the titrant. Analyte or titrate refers to the solution's undetermined concentration. In Erlenmeyer, the analyte or titrate is added.

Hence, HCl is titrated with NaOH in given concentrations.

To know more about Molarity.

https://brainly.com/question/8732513

#SPJ4

The balanced equation of the chemical reaction would be [tex]2CH_3OH + 3O_2 -- > 2CO_2 + 4H_2O[/tex]

In order to balance equations of reactions, the equations need to obey the law of conservation of atoms. According to this law, atoms can neither be created nor destroyed during reactions, but their forms may change. In other words, the total number of atoms of different elements in reactions is conserved.

Thus, the same number of atoms of different elements must exist in the reactants and the products, irrespective of their forms.

Following this rule, the balanced reaction of the equation illustrated in the problem would be: [tex]2CH_3OH + 3O_2 -- > 2CO_2 + 4H_2O[/tex]

In the balanced equation, one can see that C, H, and O atoms in the reactants and the products are of equal numbers.

More on balancing equation of reactions can be found here: https://brainly.com/question/7181548

#SPJ1

According stoichiometry and balanced chemical equation,as 339.74 g produces 2 moles , therefore 3 g is produced by 0.017 moles of silver.

Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

In the given example, according to balanced chemical equation as 339.74 g of silver nitrate produces 2 moles,

∴3 g of silver nitrate will produce 3×2/339.74=0.017 moles.

Therefore, 3.00 g of AgNO₃ is used to make 0.017 moles of silver.

Learn more about stoichiometry,here:

https://brainly.com/question/28780091

#SPJ1

Br₂(g) and K(l) species are made at the anode and cathode, respectively, during the electrolysis of molten kbr .

The term "electrolysis" describes the use of an electric current to break down a chemical. An illustration of this is the deposit of sodium and chlorine at various electrodes when the current is run through molten sodium chloride. Thus, sodium and chlorine are formed as sodium chloride breaks down. The cathode, also known as the positive or oxidizing electrode, is reduced during the electrochemical reaction after receiving electrons from the external circuit. Cations (positively charged ions) give rise to cathodes, while anions give rise to anodes. The cathode is the electrode that is negatively charged in an electrical device.

Learn more about electrolysis here:

https://brainly.com/question/12054569

#SPJ4

The molarity of the diprotic acid that requires 18.73 mL KOH is 1.405 M.

The chemical reaction between a diprotic acid and KOH is

H₂A + 2 KOH → K₂A + 2 H₂O

In stoichiometry, we learn the chemical reaction and the laws that work in it. According to Avogadro's law, the coefficient of a substance in a chemical reaction expresses the ratio of the number of moles of each substance.

[tex]M \:=\: \frac{n}{V}[/tex]

n = MV

KOH

The number of moles for a diprotic acid

n KOH : n H₂A = 2 : 1
n H₂A = n KOH ÷ 2
n H₂A = 5.619 ÷ 2
n H₂A = 2.8095 mmol

The molarity of a diprotic acid

[tex]M \:=\: \frac{n}{V}[/tex]
[tex]M \:=\: \frac{2.8095}{25.00}[/tex]
M = 1.405 M

Learn more about Stoichiometry here: https://brainly.com/question/26873446

#SPJ4

There are three stages to the ENSO weather phenomena. The Pacific Ocean can experience El Nio (extremely warm currents), La Nia  and Neutral from October through spring of the next year.

What phase of ENSO is it right now?

The most current ONI value is -1.0oC (August to October 2022). Based on the Oceanic Nino Index (ONI) [3 month running mean of ERSST. v5 SST anomalies in the Nino 3.4 zone (5N-5S, 120-170W)], recent Pacific warm (red) and cold (blue) episodes are shown.

Is ENSO cool or warm?

El Nio, Neutral, or La Nia are the three possible ENSO patterns in the tropical Pacific. El Nio and La Nia (the warm phase of each) (the cool phase)

To know more about ENSO phase visit:

https://brainly.com/question/8411831

#SPJ4

Hydrogen fluoride, HF has the strongest individual hydrogen bonds between its molecules.

An inorganic substance with the chemical formula HF is hydrogen fluoride. The main industrial source of fluorine is this colorless gas or liquid, which is frequently an aqueous solution known as hydrofluoric acid.

Aluminum, plastics, electrical components, pharmaceuticals, high-octane fuel, fluorescent light bulbs, and refrigerants are all made with hydrogen fluoride. The production of refrigerants uses 60% of the hydrogen fluoride used in manufacturing.

The difference in charge between hydrogen ions that are slightly positive and other hydrogen ions that are slightly negative results in hydrogen bonds, which are electrostatic forces that attract. Hydrogen bonds form between nearby hydrogen and oxygen atoms of adjacent water molecules in the case of water.

To know more about Hydrogen fluoride visit

https://brainly.com/question/27802323

#SPJ4

Transesterification is a three-step process where a triglyceride is converted into diglycerides, followed by monoglycerides, in a sequential order.

To learn more about Fatty acid synthesis, refer to the link:

brainly.com/question/26353151

#SPJ4

The most common pH indicator used in Simmons Citrate Agar is Bromthymol Blue (BTB)

Simmons Citrate Agar is a selective and differential medium used for the detection and differentiation of Enterobacteriaceae (gram-negative bacteria).

The medium contains sodium citrate as the sole carbon source, which is used to differentiate organisms based on their ability to utilize citrate as a sole carbon source.

The medium also contains pH indicators that change color based on the pH of the medium. The most common pH indicator used in Simmons Citrate Agar is Bromthymol Blue (BTB).

BTB is a pH indicator that turns yellow in acidic conditions and blue in basic conditions. As the bacteria metabolize the citrate in the medium, they produce acids, which cause the medium to become acidic.

This change in pH is detected by the BTB, which changes color from blue to yellow. The yellow coloration of the medium is an indication that the organism is utilizing citrate as a sole carbon source.

To know more about agar, click below:

https://brainly.com/question/4634808

#SPJ4

The concentration of NaOH  is 0.05 M

given that :

molarity of HCl solution, M1 = 0.100 M

volume of HCl solution, V1 = 12.50 mL = 0.0125 L

volume of NaOH solution, V2 = 25 mL = 0.025 L

molarity of NaOH solution, M2 = ?

using the titration formula we get :

M1 V1 = M2 V2

putting the value in the formula :

0.100 × 0.0125 = M2 × 0.025

0.00125 = M2 × 0.025

M2 = 0.05 M

Thus, the concentration of an NaOH solution if it will takes 12.50 mL of a 0.100 M HCl of the 25 mL is 0.05 M.

To learn more titration here

https://brainly.com/question/12972193

#SPJ4

Moler Heat of solution is 32.7 kJ/mol

The molar heat of a solution(ΔH) is calculated by the formula

               ΔH=q/n

Where, n-Number of moles

q- Energy of the system

q is calculated by the formula

              q=m×c×ΔT

Where ΔT=(T_f-T_i)

T_f=40.3°C, T_i=17°C

ΔT=(40.3-17)°C=23.3°C

c=4.18 J/g°C

The mass of water is

m=40 ml×(1 g/1 ml)=40 g

Substitute all values in the formula

q=40g×(4.18 J/g°C)×23.3°C

q=3895.76 J

The molar mass of LiCl is 42g/mol.  

The moles of LiCl  =5g×(1 mol/42 g)=0.11905 mol

Hence, the molar heat of a solution is

ΔH=3895.76 J/0.11905 mol =32723.7295 J/mol

Convert the value in kJ

ΔH=32723.7295 J/mol×(1 kJ/1000 J)=32.7 kJ/mol

Therefore, the molar heat of a solution is 32.7 kJ/mol.

To learn more about Moler Heat:

brainly.com/question/29658772

#SPJ4

The atomic mass of Kr > Ne, Kr has greater standard molar enthalpy, and Ne has lower standard molar enthalpy. For a given pair of molecules with similar properties, the one with greater atomic mass has a greater molar entropy. one with greater atomic mass has greater entropy under identical conditions of a number of moles, temperature and pressure.

The amount of thermal energy per unit of temperature in a system that cannot be used to carry out beneficial work is known as entropy. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion.

Enthalpy, a characteristic of a thermodynamic system, is the result of adding the internal energy of the system and the product of its pressure and volume. It is a state function that is utilized in several measurements in chemical, biological, and physical systems under constant pressure.

Hence, the atomic mass of Kr > Ne, Kr has greater standard molar enthalpy, and Ne has lower standard molar enthalpy.

To know more about Entropy, check out:

https://brainly.com/question/419265

#SPJ4

The same atoms make up tautomers, which are isomers with various electrical and molecular configurations. The associated tautomeric form is the most reliable.

Describe tautomery.

Tautomery is a specific type of isomery caused by a shift in one or more atoms' positions inside the molecule. The molecule electronic distribution and, consequently, the molecular structure are altered by this shift in location.

Tautomerization, the constant interconversion, is what gives equilibrium to the isomeres known as tautomers in solution. The same kind and number of atoms are present in both molecules.

The item in the suggested example has the chemical formula C10H16O3. In isomeric molecules, 6C, 16H, and 3O are essential. The distribution of these atoms, however, fluctuates, changing the structure of the resultant molecule.

To learn about tautomery

brainly.com/question/13776462

#SPJ4

After a while at room temperature, a piece of dry ice, or solid CO2, vanishes without leaving a puddle of liquid behind.

Dry ice, which is a solid form of carbon dioxide, is available. When used for short-term refrigeration, CO2 is usually used because it frequently sublimates from the solid form to the gas state due to the fact that it does not have a liquid state at normal atmospheric pressure. Carbon dioxide that is solid is known as "dry ice." Due to its ice-like appearance and the fact that it truly sublimes rather than melting, dry ice appears to be made of ice. Because the solid does not first become a liquid when heated, it is known as dry ice.

Dry ice, also known as solid carbon dioxide, is very cold (109 °F / 78 °C), and it is frequently used to cool vaccines, chill and freeze food, preserve blood and tissue samples, heat-treat metals, and even produce special effects like fog for events or stage plays. Because solid CO2 does not melt into a liquid when heated but instead transforms instantly into gas, it is referred to as dry ice. Sublimation is the name of this procedure.

To know more about Solid CO2 visit:

https://brainly.com/question/2726615

#SPJ4

The key features that should be present in the IR spectrum of your product if you successfully made the desired bromohydrin and the key features that should be absent from the IR spectrum if the starting material was completely reacted are the spectra of the other alcohols.

Spectra of other alcohols used in the synthesis show the presence of bromohydrin. The presence of bromohydrin with a characteristic hydroxyl stretch indicates the presence of alcohol.

Bromohydrin is formed by adding Br and OH to an alkene, the result is known as bromohydrin (bromine = bromine, hydrin = hydrogen, water).

The synthesis of bromohydrins involves highly regioselective ring expansion from epoxides to halohydrins using hydrogen and lithium halides in the presence of cyclodextrin in water as solvent.

A common absorption method for both qualitative and quantitative evaluation is infrared (IR) spectroscopy. Electromagnetic radiation that can change the vibrational and rotational states of covalent bonds in organic molecules is in the infrared region of the spectrum.

so as we know that bromohydrin by Br and OH there should be ir spectrum of Br dan OH in the IR spectrum of product

learn more Details about  Bromohydrin at :

Brainly.com/question/19578942

#SPJ4

A substance q had a vapor pressure of 345 mmHg at 22.0 °C. the temperature at a vapor pressure of 275 mmHg. the heat of vaporization of q is 36.0 kJ/mol is 19.6 °C.

The Clausius Clapeyron equation is given as :

ln ( P2 / P1 ) = - ΔH /R ( 1 / T2 - 1 / T1)

ln ( 275 / 345 ) = - 36 / 8.314 (1 / T2 - 1 / 295)

- 0.235 = - 4.33  ( 295 - T2 / 295 T2 )

15.98 T2 = 295 - T2

14.98 T2 = 295

T2 = 19.6 °C

The temperature at vapor pressure 275 mmHg is 19.6 °C.

To learn more about vapor pressure here

https://brainly.com/question/13126432

#SPJ4

The ideal gas law and the gas mass are both used to determine the amount of hydrogen in moles. Learn about the ideal gas law, which is expressed as PV = nRT, where "P" stands for pressure, "V" for volume, "n" for the number of moles of a gas, and "T" for temperature.

The weight of one mole of a sample is known as the molar mass. To determine the molecular mass of a molecule, multiply the subscript (number of atoms) by the atomic mass of each element in the molecule, then add the masses of all the elements in the molecule together.

Learn more about the mole

https://brainly.com/question/5121800

#SPJ4,

Fischer esterification is a reaction that converts carboxylic acid in presence of alcohol and strong acid catalyst to give ester as final product. Thus, NaHCO³ is one of the strong acid catalyst used in this reaction.

What is role of NaHCO³ in Fischer reaction?

Fischer reaction is a reaction between carboxylic acid and alcohol. When this reaction occurs, the product may contain some unreacted amount of carboxylic acid or acidic catalyst. Hence it is necessary to remove this and thus, this is accomplished by NaHCO³.

The reaction given below shows that how NaHCO3  dissociates and the bicarbonate anion reacts with unreacted proton to give unstable carbonic acid which dissociate to give water and carbon dioxide.

NaHCO3 = Na + + HCO3-

H+ + HCO3 - = H2O + CO2

Sodium bicarbonate also reacts with unreacted carboxylic acid whose reaction is shown below:

RCOOH +NaHCO3 = RCOO- Na+ + CO2+ H2O

RCOONa easily gets dissolve to polar solvent water and get separated.

To know more about Fischer esterification, click on https://brainly.com/question/15901894

#SPJ4

The true statement is b- Lewis bases are electron pair donors. Lewis bases are referred to as species that have extra electrons and have the tendency to give electrons to Lewis acids that have empty orbitals.

What is Lewis base?

Any substance that has the ability to give a pair of nonbonding electrons, such as the OH- ion, is considered a Lewis base. Therefore, a Lewis base is an electron-pair donor.

The correct answer is option B.

Lewis bases provide extra electrons to species with empty orbitals since they have filled orbitals compared to their own. Lewis bases are therefore electron donors, providing option (B) the proper choice.

To learn more about Lewis base from the given link.

https://brainly.com/question/17111419

#SPJ4

They are equations that represent chemical reactions using chemical formulae and symbols. In a chemical equation, the reactants are represented on the left, and the products are shown on the right.

Chemical equations are used to represent chemical reactions using symbols and substance formulae. A and B are referred to in this equation as the reactants, and C and D are referred to as the products. The chemical reaction's direction is indicated by the arrow.

Learn more about the substance formulae.

https://brainly.com/question/26694427

#SPJ4,

The statement that "it is pseudoscience because ancient knowledge is mystical yet reliable" is the most appropriate explanation.

Alchemy is considered a pseudoscience. The statement that "all matter is composed of air, fire, earth, and water" is not consistent with our modern scientific understanding of matter. Alchemy was an ancient practice that attempted to transform base metals into noble metals (such as gold) and find a way to achieve eternal life, among other goals. While alchemy did contribute to the development of early chemistry and the discovery of some chemical processes, its beliefs and methodologies were often based on mystical and philosophical concepts rather than empirical scientific evidence.

In contrast, modern science understands that matter is composed of atoms and elements. The periodic table categorizes all known elements, and we have a comprehensive understanding of atomic structure and chemical reactions, which is not consistent with the alchemical view of matter being composed of air, fire, earth, and water.

Therefore, the statement that "it is pseudoscience because ancient knowledge is mystical yet reliable" is the most appropriate explanation. Alchemy is considered pseudoscience because its claims and theories were based on mystical and speculative beliefs rather than the systematic empirical observations and rigorous scientific methodology that characterize genuine scientific endeavors.

Learn more about pseudoscience from the link given below.

https://brainly.com/question/12257058

#SPJ2

This indicates that hyaluronic acid clots in the presence of acetic acid.

The ability of hyaluronidase to prevent the development of a tight mucus clot with acetic acid shows the existence of highly polymerized hyaluronic acid. In vitro, highly polymerized hyaluronic acid is produced by cultured cells of different mesenchymal tissues. The concentration of hyaluronic acid in freshly prepared, concentrated embryo extract was determined to be between 210 and 240 mcg/ml.

Hyaluronic acid found in embryo extract was depolymerized in tissue culture with days between medium changes.

Click here to learn more about clots

https://brainly.com/question/29510382

#SPJ4

The complete question is

A physician attempts to aspirate a knee joint and obtains 0.1mL of slightly bloody fluid. Addition of acetic acid results in turbidity and a clot. This indicates that

Most studied answer

a)the fluid is synovial fluid

b)hyaluronic acid clots in the presence of acetic acid.

c)hyaluronic acid is part of synovial fluid