Which of the following pH values is the most acidic? *

a. 1
b. 3
c. 5
d. 14

Answer: [tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]

Explanation:

A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.  

A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.  

The equation which represents a precipiation reaction is:

[tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]

Answer:

The lithosphere is the solid, outer part of the Earth. The lithosphere includes the brittle upper portion of the mantle and the crust, the outermost layers of Earth's structure. It is bounded by the atmosphere above and the asthenosphere (another part of the upper mantle) below

Explanation:

They are, in order from the exterior to the interior – the crust, the mantle, the outer core, and the inner core.

Answer:

If it has to do with heat, it's thermal. ... The Greek word therme, meaning “heat,” is the origin of the adjective thermal. Something that is thermal is hot, retains heat, or has a warming effect.

Explanation:

hope it helps :)

Answer:

plato is the answer

Explanation:

that what i think it it is

Answer:

All the elements on the periodic table start with a capital letter and only some of them have a second letter that is lower case. So if you see two capital letters together in a ion then you will know that it is a polyatomic.

Answer: All the elements on the periodic table start with a capital letter and only some of them have a second letter that is lower case. So if you see two capital letters together in a ion then you will know that it is a polyatomic.

Explanation:

Answer:

Mole

Explanation:

In solids, amount of substance is given by;

n = mass/molar mass

n will have a unit of mole

However, in liquids, amount of substance is;

n = concentration × volume

Again, n will be in mole

Thus, the SI unit that represents the amount of substance is mole

moles of He=4 L/22.4 L=0.1786 mol

moles of Ne=2 L/22.4 L=0.0893 mol

total moles of the gas mixture

=0.1786+0.0893

=0.2679 mol

mole fraction of He=0.1786 mol/0.2679 mol=0.6667

mole fraction of Ne=0.0893 mol/0.2679 mol=0.3333

1- Base substitutions.

2- Deletions.

3- Insertions.

Answer:

3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3

Explanation:

Firstly, ammonium sulfide has a chemical formula of (NH4)2S while aluminum chloride has a chemical formula of AlCl3. These two chemical substances react as follows:

(NH4)2S + AlCl3 → NH4Cl + Al2S3

This chemical equation is however, unbalanced. To balance the chemical equation, one has to ensure that the atoms of each element on both the reactant and product side equates with one another.

If we carefully observe each atom on both the reactants and product side, we will have the following balanced equation:

3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3

That is;

- 6 moles of N and Cl on both sides

- 24 moles of H on both sides

- 3 moles of S on both sides

- 2 moles of Al on both sides

Explanation:

dissolve more quickly than a whole antacid tablet.

Answer:

9.15 atm

Explanation:

Ideal gas equation of state PV=nRT

P in hPa, V in L, n in mol, R is a constant which is 83.1 hpa*L/mol*k, T in kelvin.

Plug in all the number, and we will get:

P*6.21=2.02*83.1*343

P =9271.6(in hpa)=9.15 atm

Answer:

Crater size is related to the mass and velocity of the impacting body. Mass and velocity can be combined to find the kinetic energy of an impactor. ... This fundamental physical relationship allows an estimate of impactor mass to be made from crater diameter.

Explanation:

Answer: The partial pressure of the dry gas is 599.8 torr

Explanation:

According to Dalton's law, the total pressure is the sum of individual pressures.

[tex]p_{total}=p_{dry gas}+p_{H_2O}[/tex]

Given : [tex]p_{total}[/tex] =total pressure of gases = 642 torr

[tex]p_{dry gas}[/tex] = partial pressure of dry gas = ?

[tex]p_{H_2O}[/tex] = partial pressure of water = 42.2 torr

putting in the values we get:

[tex]642torr=p_{\text {dry gas}}+42.2torr[/tex]  

[tex]p_{\text {dry gas}}=599.8torr[/tex]

Thus the partial pressure of the dry gas is 599.8 torr

Answer:

Dirt

mud

rocks

ect.

Explanation:

Answer:

Explanation:

25 % ( m / v ) mannitol solution means 25 gram in 100 cc of water

25 gram in 100 mL of water

grams of mannitol in 30 mL = 25 x 30 / 100

= 7.5 grams .

Answer: 219 kJ

Explanation:

Answer: hydrogen

Explanation:

Answer:

This is not a chemical change

Explanation:

The dark green solution mixed with the water, but the water is still water. There were no bubbles, smell, temperature change, or any other signs of a chemical change

Have a great day!

A student mixes a dark green solution with water, and the result is pale green. This is a physical change.

Composition distinguishes a physical change from a chemical change. A physical change is a difference inside the look, smell, or straightforward presentation of a material sample without the need for a change in composition, whereas a chemical change alters the makeup of the substances in issue.

Despite the fact that we refer to them as physical "reactions," nothing is actually changing. A change in the substance in question's elemental composition is necessary for a reaction to occur. So, from now on, we will simply refer to bodily "reactions" as physical changes. A student mixes a dark green solution with water, and the result is pale green. This is a physical change.

Therefore, a student mixes a dark green solution with water, and the result is pale green. This is a physical change.

To know more about physical change and chemical change, here:

https://brainly.com/question/11946229

#SPJ2

Answer:

575 g

Explanation:

1 kg of sodium hydroxide is 1000/40=25 mol.

So 25 mol of sodium will be needed.

25 mol of sodium is 575 g.

According to the stoichiometry of the given chemical equation, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

46 g sodium gives 80 g sodium hydroxide, thus 1000 g sodium hydroxide requires 46×1000/80=575 g sodium.

Thus, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ2

Answer:

I think gamma, I'm not sure tho

Explanation:

Since methane gas is at 1 atm and 273 K, it is at standard temperature and pressure(STP).

One mole of every gas occupies 22.4 dm^3 at STP, and vice versa. So,

22.4 dm^3 at STP of CH4=1 mol=12+4(1)=16 g

0.462 L(0.462 dm^3) at STP of CH4

=(16 g×0.462 dm^3)/22.4 dm^3

=0.33 g

Answer:

LiCl because the total negative charge on Cl is one.

Explanation:

Lithium has a charge of 1+ and Chlorine has a charge of 1-.

There are two types of chemical compound one is covalent compound and other is ionic compound. LiCl because the total negative charge on Cl is one. The correct option is option A.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

Covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Ionic compounds are hard, these have higher melting and boiling point than the covalent compounds. Li act as cation Li⁺ and Cl act as Cl⁻. These two combine to form LiCl. LiCl is an ionic compound.

Therefore, LiCl because the total negative charge on Cl is one. The correct option is option A.

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ5

Answer:

7.96g, 33.79%

Explanation:

I'll try my best to explain the entire process behind this question ;)

From the question, you can write the reaction

[tex]2H_2O(l)->2H_2(g)+O_2(g)[/tex]

Now, there are a few reasons it is like this. Oxygen is a diatomic element, meaning it doesn't and can't exist as just O. It exists as O₂. To balance, this, double the amount of water and hydrogen so there is an equal amount of  each element on both sides of the reaction (4 H's, 2 O's on the reactant side, and 4 H's, 2 O's on the product side).

From this we can get a mole-to-mole ratio.

Onto the stoichiometry. Our goal in this is to convert from grams of water to grams of hydrogen, and we do so with a mole to mole ratio.

[tex]71.0gH_2O*\frac{1molH_2O}{18.02g} *\frac{2molH_2}{2molH_2O}* \frac{2.02g}{1molH_2}\\\\ =7.96gH_2[/tex]

Basically, what I did was divide by water's molar mass to get moles of water, multiplied by the mole-to-mole ratio (2:2) to get moles of H2, and then multiplied by H2's molar mass to get what should be the amount of H2 produced by the reaction.

For percent yield, you can calculate it is such:

[tex]\frac{Actual}{Theoretical}*100[/tex]

Plug the numbers in:

[tex]\frac{2.69g}{7.96g}*100\\\\ =33.79%[/tex]

So, the percent yield is 33.79%

Answer:

The primary reason is that the sun is low on the horizon all day. Thus, solar energy needs to pass through more atmosphere to get to the ground.

Explanation:

Hope this helps. :)

Answer:

Most all of the visible light striking the snow or ice surface is reflected back without any particular preference for a single color. Most natural materials absorb some sunlight, which gives them their color. Clean snow, however, reflects most of the sunlight, creating a white appearance.

[ I commented on the other answer with the same little add-on, then I realised I could add an answer. Even though this is four days ago, meaning the person who asked the question doesn't need another answer, I hope to give someone else who might be looking at this some insight. ]

Answer:

chemical energy to  kinetic energy

Explanation:

Answer:

A. Chemical energy to kinetic energy and gravitational potential

energy

Explanation:

Answer:

Because the rock underwent lava and heat/pressure transformation. They are cooled and heated by magma, and then under go pressure. No fossils would be found in those.

Explanation:

Hope this helps! :)

Answer:

Because...

Explanation:

Igneous rock is cooked in extreme hot temperatures.

Metamorphoc is lava cooled downed.

Answer:

Explanation:

Since salt is composed of two ions Na+ and Cl- it will attract to the opposite poles of the water and form a ion-dipole bond. This will cause the phenomenon freezing point depression where as the name states it will take a lower tempertature to freeze it. So instead of freezing at 0 degrees c it will freeze at a negative 2 or so on.

The salt ions end up slowing the growth of ice as the water molecules re-freeze.

Freezing point depression can be defined as the decreasing of the freezing point of pure solvents upon the addition of different kinds of solutes.

Depression in the freezing point can be defined as a colligative property that is proportional to the molality of the solution.

As liquid water gets colder and colder, the motions of water molecules become slower and slower. When salt is added to water, the saltwater solution is composed of both water molecules and dissolved salt ions.

As a result, salt ions can easily replace some of the water molecules. Saltwater freezes more slowly than pure water due to many of the water molecules would be "crashing" into the ice's surface in pure water and are replaced by salt ions.

Therefore, the salt water will freeze at a lower temperature than the pure water.

Learn more about freezing point depression, here:

brainly.com/question/30093051

#SPJ2