Answer:
A
Explanation:
when u get ur answer what type of reaction is it?
-double replacement
-combustion
-synthesis
-decomposition
-single replacement
Answer: combustion reaction
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical equation is:
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
The given reaction is a combustion reaction as in a combustion reaction , a susstaance is oxidized in the presence of oxygen to give carbon dioxide and water.
HELP IS IT:
A.
Model 2 is an isotope; Model 3 is an ion
B.
Model 1 is an ion; Model 3 is an isotope
C.
Model 1 is an isotope; Model 2 is an ion
D.
Model 1 is an ion; Model 2 is an isotope
Answer:
i thjink its b
Explanation:
6) What causes the stars to give off light when ignited?
Answer:
When fireworks explode in the sky, the gunpowder reactions create a lot of heat, causing the metallic substances pres- ent in the stars to absorb energy from the heat and emit light. ... These electrons absorb energy from the heat, which causes them to move from their original ground-energy state to an excited state.
Explanation:
:))
The process which generates energy in sun and other stars is nuclear fusion. The emission of light energy is thus the result of fusion reaction taking place in stars.
What is nuclear fusion?Nuclear fusion is a chemical process in which two light nuclei or isotopes of an atom fuse together to form a heavy nuclei with the release of million tons of energy.
The process in which a heavy atom breaks into lighter atoms is called nuclear fusion and it is also releasing massive energy but less than the from fusion because, the breaking of chemical bonds needs some energy to absorb.
Fusing two chemical bonds is needs no more energy and it is an energy releasing process. Millions of hydrogen atoms and its isotopes fuse together in several steps and form helium atoms.
This process of release million tons of heat energy and light energy. This will make the stars glow.
To find more about nuclear fusion, refer the link below:
https://brainly.com/question/12701636
#SPJ2
If a reaction starts with 18.8 g of A and 9.4 grams of B, and 6 grams of C is produced, how many grams of D is made?
A+B --> C + D
Answer:
gis bdu sjfdj fbgd gadi besw ......c?●q
What are 2 facts about neon
which changes of state require a decrease in energy
Answer:
freezing,
deposition
evaporation
Explain the ways that carbon dioxide is added to the atmosphere. How is it removed? Does most carbon enter the atmosphere as carbon dioxide or is it in another form? How do increased levels of carbon dioxide in the atmosphere affect the earth?
Answer:
Carbon dioxide is added to the atmosphere by human activities. When hydrocarbon fuels (i.e. wood, coal, natural gas, gasoline, and oil) are burned, carbon dioxide is released. During combustion or burning, carbon from fossil fuels combine with oxygen in the air to form carbon dioxide and water vapor.Carbon moves from fossil fuels to the atmosphere when fuels are burned. When humans burn fossil fuels to power factories, power plants, cars and trucks, most of the carbon quickly enters the atmosphere as carbon dioxide gas. Each year, five and a half billion tons of carbon is released by burning fossil fuels.Carbon dioxide causes about 20 percent of Earth's greenhouse effect; water vapor accounts for about 50 percent; and clouds account for 25 percent.Likewise, when carbon dioxide concentrations rise, air temperatures go up, and more water vapor evaporates into the atmosphere—which then amplifies greenhouse heating
please help as soon as possible!
Answer:
1st one
Explanation:
Answer:
B
Explanation:
chlorine 2×3= 6 not sure
How would adding the catalyst nitrogen monoxide (NO) affect this reaction?
2SO2(g) + O2(g) → 2SO3(g)
A.
NO increases the rate at which SO3 molecules are formed.
B.
NO reacts with SO3 to produce more SO2 molecules.
C.
NO decreases collisions between the SO2 and O2 molecules.
D.
NO increases the concentration of the SO2 and O2 molecules.
E.
NO increases the activation energy of the SO2 and O2 molecules
Answer:
C
Explanation:
Answer: A. NO increases the rate at which SO3 molecules are formed.
Explanation: I got this right on Edmentum.
How does mass affect potential energy?
What i would say: The amount of gravitational potential energy an object has depends on its height and mass. The heavier the object and the higher it is above the ground, the more gravitational potential energy it holds. Gravitational potential energy increases as weight and height increases.
Hope this helps! :)
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
Humans and trees are interdependent - we breathe in oxygen and breathe out carbon dioxide, while trees take in carbon dioxide and release oxygen.
Humans have about a thousand genes similar to those of bacteria, presumably because the genes are so vital that their DNA structure has remained much the same over millions of years of descent from a common ancestor.
Explanation:
Fill in the blanks and name the process.
What is the process of ____ reproduction where a cell makes ___ of itself?
PLEASE HELP ASAP!!!!!!!!!! WILL GIVE BRAINLIEST TO CORRECT ANSWER!
Read the given chemical reaction.
C2H6 + O2 → CO2 + H2O
How many moles of H2O are produced during the complete combustion of 1.4 moles of C2H6?
A. 5.6 moles
B. 2.8 moles
C. 7.0 moles
D. 4.2 moles
What must happen for heat to be transferred by convection?
Answer:
D.) The liquid or gas must circulate to move the heat
Explanation:
what dose the atomic number of an element represent
Answer:
No. of electrons of the element
Which type of molecule is shown below?
The type of molecule is to be considered as the option a. Alkyne. And, the same is to be considered.
What is alkyne?In terms of the chemical compound, Alkynes refer to Molecules which comprise of the triple bond that arise between 2 carbon atoms.
Also, the triple bond should be made up of one σ bond and two π bonds.
hence, The type of molecule is to be considered as the option a. Alkyne. And, the same is to be considered.
Learn more about molecule here: https://brainly.com/question/16273896
1. waves that use matter to transfer energy
2. rhythmic disturbance that carries
energy
3. waves in which matter in the medium
moves in the same direction as the wave
4. example of a compressional wave
5. example of a mechanical wave
6. The matter in the medium moves up
and down or back and forth at right
angles to the direction the wave travels.
7. waves that do not require matter
to carry energy
8. ripples on the surface of a pond
9.the matter though which a mechanical wave travels
10.vibration of vocal chords creates this
Definitions: a. Water wave
b. Compressional waves
c. Transverse wave
d. wave
e.mechanical wave
f. electromagnetic wave
g. Sound wave
h. medium
Please match all the terms in the right spot and btw you will be able to use the same term more then once’s
Answer:
1. e
2. d
3. b
4. g
5. g, a both work
6. c
7. f
8. a, d both work
9. h
10. g
Explanation:
Loren has the samples of elements that are listed below at room temperature. He exposes the samples to the same heat source until each sample reaches a temperature of 90.0°C. 10 g of Al(s) (C subscript p. = 0.897 J/(gi°C)) 10 g of Ag(s) (C subscript p.= 0.234 J/gi°C ) 10 g of Fe(s) (C subscript p. = 0.450 J/gi°C) 10 g of Zn(s) (C subscript p. = 0.387 J/gi°C ) From first to last, which lists the order in which these samples will reach 90.0°C? Al, Fe, Zn, Ag Ag, Zn, Fe, Al Al, Fe, Ag, Zn Ag, Al, Zn, Fe
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al.
What is specific heat capacity?The term specific heat capacity refers to the quantity of heat that is required to raise the temperature of an object by 1K. The higher the heat capacity, the greater the heat that is required for the object to reach 90.0°C.
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al. We can see that Ag has the lowest heat capacity and the first to reach 90° while All has the highest heat capacity and the last to reach 90°.
Learn more about heat capacity:https://brainly.com/question/13499849
#SPJ2
What is the molarity of a solution with a 10.0 g AgNO3 dissolved in 0.5 L of solution ?
How much will atmospheric carbon change in one year?
Answer:
Carbon dioxide is a greenhouse gas: a gas that absorbs heat. Warmed by sunlight, Earth’s land and ocean surfaces continuously radiate thermal infrared energy (heat). Unlike oxygen or nitrogen (which make up most of our atmosphere), greenhouse gases absorb that heat and release it gradually over time, like bricks in a fireplace after the fire goes out. Without this natural greenhouse effect, Earth’s average annual temperature would be below freezing instead of close to 60°F. But increases in g...
Explanation:
What is the organelle that contains DNA?
golgi apparatus
ribosomes
endoplasmic reticulum
chromosomes
A pitcher threw a baseball straight up at 35.8 meters per second. What was the ball’s velocity after
2.50 seconds? (Note that, although the baseball is still climbing, gravity is accelerating it downward.)
Answer:
9.8
Explanation:
10 points
What is the molar mass of argon?
Answer:
39.948 u
Explanation:
What is the percent by mass (mv) of a solution with 1.56 g of benzene dissolved in gasoline to make 998.44 mL of solution? (density of gasoline = 0.7489 g/mL)
please I need help lol
Answer:
The percentage by mass of benzene in the solution is approximately 0.2%
Explanation:
The given parameters are;
The mass of the benzene solute dissolved in the gasoline solvent, m₁ = 1.56 g
The total volume of the benzene gasoline solution made, V = 998.44 mL
The density of gasoline, ρ = 0.7489 g/mL
Mass, m = Density, ρ × Volume, V
∴ The mass of gasoline in the 998.44 mL, solution = 0.7489 g/mL × 998.44 mL = 747.731716 g
The total mass of the solution = The mass of the benzene in the solution + The mass of the gasoline in the solution
∴ The total mass of the solution = 747.731716 g + 1.5 g = 749.231716 g
[tex]The \ percentage \ by \ mass = \dfrac{The \ mass \ of \ a \ fraction}{(The \ mass \ of \ the \ total \ solution)} \times 100[/tex]
The percentage by mass of benzene in the solution = (1.5 g/749.231716 g)×100 ≈ 0.2% by mass.
please if you know help
please
the formula of copper sulfate crystals is CuSo4.5H2O. 400ml of 0.02mol/l copper (ii) sulfate solution is needed to be prepered .
a. calculate the molar mass of the solute .
b. calculate the mass of the solute that sould be weighted to prepare this solution .
c. describe in details the steps of preperation of the solution
Answer: a. 249.5 g/mol
b. 1.996 g
c. Measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve in water until the volume is 400 ml
Explanation:
Molar mass is the sum of atomic masses of all the elements present.
Thus molar mass of [tex]CuSO_4.5H_2O[/tex] = 1(63.5)+1(32)+4(16)+5(18) = 249.5 g/mol
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{given mass of solute}\times 1000}{\text {Molar mass of solute}}\times \text{Volume of solution in ml}}[/tex]
[tex]0.02mol/L=\frac{x\times 1000}{249.5g/mol\times 400}[/tex]
[tex]x=1.996 g[/tex]
c. We need to measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve it in water to make the volume 400 ml.
Plz help guys ASAP!
Thanks in advance
Answer:
3.6 moles
Explanation:
The balanced equation for the reaction is given below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
1 mole of N₂ reacted with 3 moles of H₂ to produce 2 moles NH₃.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
1 mole of N₂ reacted with 3 moles of H₂.
Therefore, 3.2 moles of N₂ will react with = 3.2 × 3 = 9.6 moles of H₂.
From the calculation made above, we can see that it will take a higher amount (i.e 9.6 moles) of H₂ than what was given (i.e 5.4 moles) to react completely with 3.2 moles of N₂.
Therefore, H₂ is the limiting reactant and N₂ is the excess reactant.
Finally, we the greatest quantity of ammonia, NH₃ produced from the reaction.
In this case, the limiting reactant will be use because all of it is consumed in the reaction.
The limiting reactant is H₂ and greatest quantity of ammonia, NH₃ produced can be obtained as follow:
From the balanced equation above,
3 moles of H₂ reacted to produce 2 moles NH₃.
Therefore, 5.4 of H₂ will react to produce = (5.4 × 2)/3 = 3.6 moles of NH₃
Thus, the greatest quantity of ammonia, NH₃ produced from the reaction is 3.6 moles
Give 3 examples of a solution
Answer:
Comrade, figures, and sad
Explanation
The solution of sugar, salt etc in water.
Sublimation of substances like iodine, camphor etc into the air.
Hydrated salts, mercury in amalgamated zinc,
Alcohol in water, benzene in toluene
HELPPPP A student has 32.3 g of carbon dioxide (CO2). How many moles of carbon
dioxide are contained in this sample?
Do you have the answers for this test ?!?Im taking it right now and grades are due this friday so I need to pass this test
CHCl3 has how many double bonds?
Answer:
It has two sigma bonds ( the single bonds between each H and C) plus one pi bond and one sigma bond that consitute the double bond between C and O. It contains three covalent bonds, one . Hydrogen Bond Donor Count: 0: Computed by Cactvs 3.4.
Explanation:
Hope it helps you!
Consider the following representation of a reaction mechanism.
Step 1: A+A → C+E (slow)
Step 2: E + B → A+D (fast)
Overall reaction: A + B → C + D
What should appear in the rate law for the reaction above?
A) only A and B because they are reactants in the overall reaction
B) only C and C because they are products in the overall reaction
C) only A because it is the reactant in the rate-determining step
D) only E and B because they are the reactants in the rate-determining step
Answer:
The rate determining step is step 1
Explanation:
In the rate law for the given reaction,
only A appears because it is the reactant in the rate-determining step.So, option C is correct one.
Which step is rate determining steps?The slowest steps is rate determining step of the reaction.It is because in rate determining step the intermediate is formed.What is intermediate ?The short lived species formed in the mechanism of reaction is called intermediate.The intermediates is formed in slowest step because it is unstable species.What is rate law for the reaction?The rate law is also known as rate equationIt is the expression that provides relationship between rate and concentration of the reaction in a chemical reaction.The rate law is determined by the experimentally.If the reaction occurs in multi steps then the rate of the reaction is depends upon slowest step of the reaction.learn about rate law,
https://brainly.com/question/4222261
#SPJ2