Which of the following is a process that changes the composition of rocks from one material to another? (3 points) a Erosion b Deposition c Physical weathering d Chemical weathering

The Lewis Dot Structure for ionic compounds must demonstrate how the electrons are transported to create the ions in the compound. The Lewis Dot Structures of covalent compounds must demonstrate how the electrons are being shared to finish the octets of each atom in the molecule.

A chemical compound known as an ionic compound is one that contains ions bound together by the electrostatic forces known as ionic bonding. Despite having both positively and negatively charged ions, or cations and anions, the molecule is generally neutral.

The term "ionic bonding" refers to a bond in which the ionic character is greater than the covalent character, i.e., when there is a significant difference in the electronegativity of the two atoms, which makes the bond more polar (ionic) than in a covalent bond, where the electrons are distributed more evenly.

The Lewis structures are not frequently drawn for ionic compounds due to the electrical motion of electrons.

Thus, The Lewis Dot Structure for ionic compounds must demonstrate how the electrons are transported to create the ions in the compound.

To learn more about an ionic compound, follow the link;

https://brainly.com/question/9167977

#SPJ2

Answer: If the outer shell is filled, the atom is stable. Atoms with unfilled outer shells are unstable, and will usually form chemical bonds with other atoms to achieve stability.

(hope this helps ^^)

Answer:

Propionic acid

Explanation:

Step 1: Write the generic neutralization reaction

HA + NaOH ⇒ NaA + H₂O

Step 2: Calculate the reacting moles of NaOH

21.85 mL of 0.1062 M NaOH react.

0.02185 L × (0.1062 mol/L) = 2.320 × 10⁻³ mol

Step 3: Calculate the reacting moles of HA

The molar ratio of HA to NaOH is 1:1. The moles of HA are 1/1 × 2.320 × 10⁻³ mol = 2.320 × 10⁻³ mol.

Step 4: Calculate the molar mass of HA

0.1719 g of HA correspond to 2.320 × 10⁻³ moles.

MM = 0.1719 g/2.320 × 10⁻³ mol = 74.09 g/mol

With this molar mass, the most likely acid is propionic acid.

Answer:

b. only weather includes information about the temperature

Answer:

extensive properties

Explanation:

,such as mass and volume, depend on the amount of matter being measured. Intensive properties, such as density and color, do not depend on the amount of the substance present. Physical properties can be measured without changing a substance's chemical identity.

Answer:

The answer is boiling point

Answer:

We are given:

v1 = 3.2 L                   v2 = x L

p1 = 822 torr OR 1.08 atm        p2 = 2.33 atm

t1 = t2 = 284 k

From the Ideal gas equation:

PV = nRT

Since the number of moles (n), universal gas constant (R) and Temperature (T) are constant

PV = k      (where k is a constant)

it can also be written as:

P1V1 = k --------------------------(1)

Similarly,

P2V2 = k (where k is the same constant as before)----------(2)

Solving for V2:

From (1) and (2):

P1V1 = P2V2

Replacing the variables

1.08 * 3.2 = 2.33 * x

x = (1.08 * 3.2)/2.33

x = 1.5 L (approx)

Therefore, the final volume of the solution will be 1.5L

Answer:

they are expected to have the same particles because their masses are the same with there molar mass

Answer:

The release into the air of chemicals and particles can cause direct damage to the troposphere (air pollution); alter the composition and function of atmospheric layers (greenhouse effect) or other indirect damages (ozone layer depletion).

Explanation:

Answer:transition metal ionic compound with nonmetal anion

Explanation:

Answer:

Your answer is going to be D. transition metal ionic compound with nonmetal anion

Hope this helps :)

Answer:D. Sulfur Hexafluride

Explanation:

D. Sulfur Hexafluride

Explanation:

above it says the substance floats above water at room temperature and lists some substances and their density at room temp!

we know that the density of water is 1.0 so the substance in order for it to float has to be less than 1.0 and the densities for Sulfer Hexa, are all less than 1!!

Answer:

endothermic means energy is taken in and temperature increases.

Answer:

their are many alternative for cornstarch.But I know only 10 of them and they are:

1.Rice Flour

2.wheat Flour

3.Potato Starch

4.Arrowroot

5.Tapioca

6.Ground Flaxseeds

7.Gaur Gum

8.Xanthan Gum

9.Glucomannan

10.Xanthan Gum

Answer:

[tex]A=275.1g[/tex]

Explanation:

Hello.

In this case, since the radioactive decay is computed via:

[tex]A=A_0*2^{-\frac{t}{t_{1/2}}[/tex]

For the initial amount of Ra-226 (300 g), once 200 years have passed, the remaining mass is:

[tex]A=300g*2^{-\frac{200years}{1600years}}\\\\A=275.1g[/tex]

This is, considering that the half-life is 1600 years, it means that the mass of Ra-226 is decreased.

Best regards.

Answer:

True

Explanation:

Sorry if this is late lol

Answer:

The answer is True.

Explanation:

Did not copy

Answer:

4

Explanation:

In CH3OOH, there is H3, which means 3 hydrogen atoms, but there is also an H at the end, which means another hydrogen atom.

3 + 1 = 4

Answer:

3 - coefficient

2 subscripr

6 total #

cl- element symbol

Answer:

[CO2] > [N2] > [He]

Explanation:

The relative concentration of CO2, N2 and He depends on the solubility of each gas in water. The more soluble in water a gas is, the greater its concentration in aqueous solution.

Among the gases listed, CO2 is most soluble in water hence it is expected to have the greatest concentration in solution followed by N2. Helium gas is insoluble in water hence it has the least concentration in the aqueous solution.

The two properties which can be measured from the given information are streak and cleavage of the mineral.

Minerals are naturally forming inorganic substances having crystal structure and metallic characteristics. They have a definite chemical composition and  homogeneity.

Streak is the color of powder form of mineral and cleavage is how the mineral cleave when we cut through a plane.  Hardness says how much hard the solid is.

When the mineral breaks into cubes when struck with a hammer, we measure its cleavage properties. The red trail on scrapping indicates the streak of the mineral.

Hence, the two properties we can measure from breaking by hammer and scrapping by an unglazed porcelain are its cleavage and streak.

To learn more about minerals, refer the link below:

https://brainly.com/question/18078524

#SPJ2

Answer:

AR(18)  

Explanation:

Try that it should work

                                                                                                                                         *(

Answer:

Decrease

Explanation:

Density is defined as the mass per unit volume. Density is highly influenced by temperature.

The density of metals and copper is inversely proportional to the temperature, it means density of copper decreases with an increase in temperature or when heated. This is so because when the copper is heated, the copper atoms start vibrating faster that allows the collision of atoms with each other faster and occupying more volume than before. As the copper atoms occupy more volume, the density of copper decreases.

Hence, the correct answer is "On applying heat the density of copper decreases".

Answer:

14

Explanation:

For example, silicon has 14 protons and 14 neutrons. Its atomic number is 14 and its atomic mass is 28. The most common isotope of uranium has 92 protons and 146 neutrons. Its atomic number is 92 and its atomic mass is 238 (92 + 146).

Answer:

4e-5 is the length in meters

Have a nice day! :)

Answer:

The balloon will occupy a volume of 1.32L.

Explanation:

Given the following data;

Original Volume, V1 = 1.03L

Original Temperature, T1 = 99°C

New Temperature, T2 = 198°C

To find new volume V2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] VT = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Converting T1, from Celsius to Kelvin = 273 + 99 = 372K

Converting, T2, from Celsius to Kelvin = 273 + 198 = 471K

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making V2 as the subject formula, we have;

[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]

[tex] V_{2}= \frac{1.03}{372} * 471[/tex]

[tex] V_{2}= 0.0028 * 471[/tex]

V2 = 1.32L

Therefore, the balloon will occupy a volume of 1.32L at 198°C

Answer:

.0924 moles of NaCl

Explanation:

So you know you have 5.4 g of NaCl and you need to know how many moles there are in this amount of NaCl

Add these two together----> 22.99 + 35.45 = 58.44

Now you can calculate for moles

Written-out method:

5.4 grams of NaCl  |   1 mole of  NaCl              

                                | 58.44 grams NaCl                = .0924 moles of NaCl

Plug into calculator method:

(5.4 g of NaCl/ 58.44g NaCl= .0925 moles)

Answer:

Styrofoam could be heavier than a rock depending on how much weight you put on it,

Water is heavier than a ping pong ball,

A gold ring is not heavier than a pencil,

Oil is heavier than water because of the combined mass.

A large log is heavier than a small rock.

Explanation:

Given parameters:

Number of moles of Nitrogen = 2.0mole

Temperature of the gas = 1000c

Pressure on the gas = 100000Pa

Gas constant R = 8.31J/molK = 0.082atmdm³mol⁻¹k⁻¹

Unknown:

Volume in cubic meter and cubic decimeter = ?

Solution:

The ideal gas law is given as;

       PV  = nRT

where P is the pressure on the gas

          V is the volume of the gas

         n is the number of moles

         R is the gas constant

         T is the temperature of the gas

Let us convert to appropriate units;

      1000°C to K;

       K  = 1000 + 273  = 1273K

100000Pa to atm;

           101325Pa  = 1atm

           100000Pa = 0.99atm

 Input the parameters and solve for the unknown;

      0.99 x V  = 2 x 0.082 x 1273

                   V  = 210.9dm³

to m³;

        1000dm³   = 1m³

        210.9dm³ = [tex]\frac{210.9}{1000}[/tex]   = 0.21m³