Which of the following functions of money would be violated if inflation were high? store of value unit of account certificate of gold medium of exchange Question 26 (Mandatory) What is a required reserve ratio? The percent of deposits that banks must keep on hand. The percent of reserves that banks can loan out. The ratio of deposits to loans. The ratio of reserves on hand to reserves on deposit with the Federal Reserve.

Answers

Answer 1

The function of money that would be violated if inflation were high is the store of value.

One of the most important functions of money is as a store of value. Money can be saved for use in the future due to this function. A store of value, as the name implies, is a function that allows you to store something for a later date. Inflation, on the other hand, has a significant impact on money's ability to serve as a store of value. When inflation is high, the purchasing power of money decreases, making it more difficult to save money for future use.

Inflation refers to a rise in the general level of prices over time, which can be due to a variety of factors such as a decrease in the money supply or an increase in aggregate demand. Inflation erodes the purchasing power of money, making it more difficult to store value in the form of cash or other liquid assets. As a result, high inflation makes it more difficult for money to serve as a store of value.

Learn more about aggregate demand: https://brainly.com/question/15157098

#SPJ11


Related Questions

Yoko and John decided to get married in Japan. Yoko is from Japan, but she and John reside permanently in Ontario. They planned a two-week trip to Japan, hoping to get married in a Shinto ceremony. When they got to Japan, they learned that there was a residency requirement of one month to get married. They went ahead with the ceremony any way. Will this marriage be recognized as valid in Ontario? Discuss.

Answers

Yoko and John planned a two-week trip to Japan to get married in a Shinto ceremony. However, upon arriving, they learned that Japan has a one-month residency requirement to get married.

Despite this, they went ahead with the ceremony. The question is whether their marriage would be recognized as valid in Ontario. According to Ontario law, for a marriage to be recognized, the marriage must be valid under the law of the place where the marriage occurred.

If the marriage is valid under Japanese law, it will be recognized in Ontario even if it does not meet the residency requirement. The Canadian government has agreements with many countries including Japan on recognizing each other's marriages. Therefore, the marriage between Yoko and John would be recognized as valid in Ontario if it is valid under Japanese law.

To know more about planned visit:

https://brainly.com/question/32363096

SPJ11

Hans would to plan ahead for this pension. For this in 31 years he needs a base amount of 120,000€. Which amount does he have to save by the beginning of each month if the yearly interest rate is at 2.03%?

Answers

Hans needs to save a monthly amount to reach €120,000 in 31 years, considering a 2.03% yearly interest rate.

To calculate the monthly savings amount required for Hans to accumulate €120,000 in 31 years, we need to consider the effect of compound interest.

Given an annual interest rate of 2.03%, we can divide it by 12 to obtain a monthly interest rate of approximately 0.1692%. We can then use the future value of an ordinary annuity formula to determine the monthly savings amount. The formula is:

Where PMT is the monthly savings amount, PV is the desired future value (€120,000), r is the monthly interest rate (0.001692), and n is the total number of months (31 years * 12 months/year). Plugging in these values, we find that Hans needs to save approximately €147.86 each month.

Learn more about amount here-

brainly.com/question/31718749

#SPJ11

Which one of the following basic technology groups relies heavily on the human operator and is not highly mechanized?
a. Large-batch production
b. Assembly line production
c. Continuous-process production
d. Small-batch production

Answers

Small-batch production relies heavily on the human operator and is not highly mechanized (option d).

1. Large-batch production: This technology group involves the production of goods in large quantities, typically through automated machinery and processes. The emphasis is on mass production and efficiency, with minimal reliance on human operators. Therefore, it is not the correct answer.

2. Assembly line production: Assembly line production is characterized by a sequential arrangement of workers and machinery, with each worker responsible for a specific task in the production process. While human operators play a significant role in assembly line production, the system is highly mechanized and designed to maximize efficiency. Hence, it is not the correct answer.

3. Continuous-process production: Continuous-process production refers to a method where the production process operates continuously without interruption. It often involves complex machinery and automation systems, reducing the reliance on human operators. Therefore, it is not the correct answer.

4. Small-batch production: Small-batch production involves the creation of goods in limited quantities, tailored to specific customer requirements or niche markets. This approach typically relies heavily on skilled human operators who perform various tasks manually or with minimal automation. Small-batch production allows for flexibility and customization, but it is not highly mechanized due to the need for adaptability and the smaller scale of production. Thus, small-batch production is the correct answer to the question.

In conclusion, out of the given technology groups, the one that relies heavily on the human operator and is not highly mechanized is d. Small-batch production.

For more such questions on production, click on:

https://brainly.com/question/7924898

#SPJ8

Company B's ROA is 6.8%, and its Debt-to-Equity Ratio is 1.8. Then Company B's ROE equals (Round to 3 decimal places; for example, 0.123. Do NOT write the answer in percentages. For example, if your answer is 12.3%, you should write 0.123 in the box).

Answers

ROE refers to Return on Equity, whereas ROA refers to Return on Assets. The debt-to-equity ratio, on the other hand, compares a company's debt to its equity. It's used to determine how much leverage a company has. It indicates how much of a company's financing comes from debt compared to equity.Company B's ROE is 0.452 or 45.2%.

ROE can be determined by multiplying ROA by Asset Utilization, which is the measure of how effectively a company is using its assets. It can be represented by the equation:

ROE = ROA * Asset Utilization * Financial Leverage

ROE = ROA * (Total Assets / Equity) * (Total Assets / Total Equity)

Here, Company B's ROA is 6.8%, and its Debt-to-Equity Ratio is 1.8.,ROA = 6.8%,Debt-to-Equity Ratio = 1.8

Let's substitute these values into the ROE formula to find out its value:

ROE = 6.8% * (Total Assets / Equity) * (Total Assets / Total Equity)

Total Assets / Equity = Debt-to-Equity Ratio + 1

Total Assets / Total Equity = Debt-to-Equity Ratio * ROE = 6.8% * (1.8 + 1) * (1.8 * ROE)

1 = 6.8% * 2.8 * 1.8 * ROE

ROE = 0.228 / 0.504

ROE = 0.452

It implies that Company B's ROE is 0.452 or 45.2%. The solution is to be rounded to 3 decimal places. Thus, the final answer is 0.452.

To know more about Return on Equity visit:

https://brainly.com/question/27821130

#SPJ11

which of the following is an advantage of licensing as an approach to internationalization? a. extended profitability b. flexibility c. shared ownership d. lack of competition e. lesser uncertainty

Answers

An advantage of licensing as an approach to internationalization is flexibility.The correct answer is option B.

Licensing allows a company to expand its reach into international markets without committing extensive resources or making substantial investments.

By granting a license to a foreign entity, the company can leverage the expertise and infrastructure of the licensee to distribute and sell its products or services in the target market.

This provides the company with the flexibility to enter new markets quickly and efficiently, as it does not need to establish its own operations or build a local presence from scratch.

Moreover, licensing offers extended profitability. By licensing its products or services, a company can generate additional revenue streams through royalty payments or licensing fees.

The licensee pays the licensor for the right to use the intellectual property, trademarks, or technology associated with the licensed products or services.

This allows the licensor to benefit financially from the licensee's efforts in marketing, distribution, and sales without incurring substantial costs or risks.

However, it is important to note that licensing does not provide shared ownership or lack of competition. The licensee operates as an independent entity and may have its own competitors in the market.

For more such questions flexibility,Click on

https://brainly.com/question/32964613

#SPJ8

Final answer:

Licensing provides lesser uncertainty as a benefit of internationalization. It allows small economies to capitalize on economies of scale and boost profitability while facing better competition, variety, and innovation in the international trade arena.

Explanation:

The advantage of licensing as an approach to internationalization is e. lesser uncertainty. Licensing is a strategic method where a company allows another company in a foreign country to use its intellectual property such as patents, trademarks, copyrights, technology, and production processes. In return, the licensor earns license fees or royalties.

With licensing, the licensor can bypass many challenges linked to international trade like high import tariffs, quota system, and restrictive legislation or rules. It is particularly beneficial to small economies keen on expanding without having to deal directly with all the risks associated with global business operations. It provides an advantageous way to enter a foreign market with a lower level of uncertainty and risk.

For instance, the concept of economies of scale, which is about reducing production cost by producing large quantities, stands to benefit from international licensing. A small economy needing to manufacture cars at a lower cost can license a bigger automobile manufacturing company. In doing so, they can avoid the setup cost and uncertainty linked to building and running a fully-owned production facility. Despite the stiff competition, the benefits, variety, and increased innovation that result from international trade via licensing can lead to an extended profitability, creating a win-win situation for both parties involved in the licensing agreement.

Learn more about International Business Licensing here:

https://brainly.com/question/32810329

#SPJ6

What are the types of financing that new businesses are usually
able to get and why are they not usually able to get other types of
financing?

Answers

Financing is one of the major challenges faced by new businesses. However, there are various types of financing that new businesses can obtain to fund their startup. These financing options may include personal savings, loans, grants, venture capital, angel investment, and crowdfunding among others.

Despite these financing options being available, new businesses are not usually able to obtain some types of financing due to various reasons.
For instance, new businesses are not usually able to get conventional bank loans since banks are wary of lending to untested business ventures that have no credit history. Additionally, banks require borrowers to provide collateral or assets as security for the loan which is difficult for new businesses since they have not yet built their asset base. Startups that have been in existence for less than two years are also not likely to qualify for venture capital financing since investors are looking for businesses with a track record of generating revenue and profit.
In conclusion, new businesses are not usually able to get other types of financing such as traditional bank loans and venture capital financing because they lack the credit history, assets, and the track record required by lenders and investors. Therefore, entrepreneurs should explore alternative financing options such as grants, crowdfunding, and personal savings to fund their startup.

To know more about Financing visit:
https://brainly.com/question/10024737
#SPJ11

company earned $7 per share in the year that just ended. The company has no more growth opportunities. The company has an 11 percent return on equity and an 11 percent cost of equity. Do not round intermediate calculations. Round your answers to the nearest cent.
What is the stock worth today?
What if the company was expected to earn $7.50 next year and then never grow again? Assuming that their return on equity and cost of equity didn't change, what would the stock be worth today?

Answers

We are required to calculate the worth of the company's stock, given its earnings per share, return on equity, and cost of equity. The worth of the stock today can be determined using the Dividend Discount Model (DDM) formula as follows:Stock worth today = D₁ / (r - g)Where,D₁ = Dividend payable after one yearr = Required rate of returng = Growth rate (constant) Given that the company has no more growth opportunities.

the growth rate is zero (g = 0).Therefore,Stock worth today = D₁ / rWe know that the company earned $7 per share in the year that just ended. Hence, Dividend payable after one year (D₁) = Earnings per share = $7Also, the return on equity is 11%. Therefore, the required rate of return is also 11% (r = 11%). Substituting the values in the above formula, Stock worth today = 7 / 0.11 = $63.64.

Therefore, the worth of the company's stock today is $63.64.If the company was expected to earn $7.50 next year and then never grow again, the dividend payable after one year would be $7.50.The growth rate would be zero (g = 0).Hence,Stock worth today = D₁ / r Stock worth today = 7.5 / 0.11 = $68.18 Therefore, if the company was expected to earn $7.50 next year and then never grow again, the stock would be worth $68.18 today.

To know more about company's stock visit:

https://brainly.com/question/29757308

#SPJ11

What are two of the most concepts about Lobbying, Political
Activity and IRS Rules for 501(c)(3)s

Answers

Lobbying is the act of attempting to influence decisions made by government officials. It can be a significant tool for organizations to achieve their goals. This is why many non-profit organizations engage in lobbying activities to affect policies and decisions that are pertinent to their objectives and missions.

However, non-profit organizations must be careful when it comes to lobbying activities as the IRS rules state that a non-profit organization cannot participate in any political activity that could potentially support or oppose any particular candidate for public office, or take part in campaigns for or against a political party in any way

The IRS rules for 501(c)(3)s state that non-profit organizations can engage in lobbying activities as long as it is not their primary activity.

It comes to non-profit organizations and lobbying, the IRS rules state that organizations can engage in lobbying activities as long as it is not their primary activity. The IRS has also placed limits on how much a non-profit organization can spend on lobbying activities. According to the IRS rules, no more than 20% of a non-profit's budget can be used for lobbying activities in any given year. This is referred to as the "expenditure test."

In conclusion, lobbying is an essential tool for non-profit organizations to achieve their goals and influence policy decisions. However, non-profit organizations must be careful when it comes to lobbying activities, as the IRS rules prohibit any political activity that could potentially support or oppose any particular candidate for public office. Instead, non-profits can engage in direct or grassroots lobbying, provided that it is not their primary activity, and they do not exceed the expenditure test limit of 20% of their budget for lobbying activities.

To know more about attempting visit :

https://brainly.com/question/32161947

#SPJ11

rommel trucking uses cargo miles driven (cmd) as an activity base. the company reports the following breakdown of cost behaviors: purely fixed costs

Answers

To summarize:
1. Purely fixed costs do not change with the level of activity.
2. Examples of purely fixed costs for Rommel Trucking could include salary expenses, rent, and depreciation expenses.
3. These costs remain constant regardless of the number of cargo miles driven.

Based on the given information, Rommel Trucking uses cargo miles driven (CMD) as an activity base. They have reported the following breakdown of cost behaviors: purely fixed costs.

Purely fixed costs are costs that do not change with the level of activity. These costs remain constant regardless of the number of cargo miles driven. Examples of purely fixed costs for Rommel Trucking could include the salary of a supervisor who is not directly involved in the cargo transportation process, the monthly rent of the office space, or the depreciation expense of the company's trucks.

It is important to note that purely fixed costs are not affected by changes in the activity level, such as the number of cargo miles driven. Regardless of whether Rommel Trucking drives 100 cargo miles or 1000 cargo miles, these costs will remain the same.

I hope this helps! Let me know if you have any further questions.

To know more about Purely fixed costs here :

https://brainly.com/question/15993487

#SPJ11

imagine a bank that offers 8% annual earnings on savings accounts.
As an avid saver, you decide to put $40 in your savings account
every month. If the bank requires a $50 deposit to create the
account
Imagine a bank that offers 8 % annual earnings on savings accounts. As an av If the bank requires a $ 50 deposit to create the account and interest is compo Let p_{n} be defined as

Answers

Imagine a bank that offers 8% annual earnings on savings accounts.As an avid saver, you decide to put $40 in your savings account every month.

The p₆ = $52.03 (rounded off to the nearest cent). Hence, the value of p₆ is $52.03.

To calculate the value of p₆, which represents the amount in the savings account after six months, we can use the compound interest formula. Let's break down the calculation step by step:

Given:

- Initial deposit (P) = $50

- Annual interest rate (r) = 8% = 0.08

- Monthly interest rate (R) = r/12 = 0.08/12 = 0.00667 (0.667%)

- Number of times compounded in a year (n) = 12

- Total time for six months (t) = 6/12 = 0.5 years

To calculate the compound interest for the first month:

P(1 + R)^nt = $50(1 + 0.00667)^1 = $50.33 (rounded off to the nearest cent)

For the second month:

New principal = P + compound interest from the first month = $50 + $0.33 = $50.33

Compound interest = P(1 + R)^nt - P = $50.33(1 + 0.00667)^1 - $50 = $0.33

For the third month:

New principal = $50.33 + $0.33 = $50.67

Compound interest = P(1 + R)^nt - P = $50.67(1 + 0.00667)^1 - $50.33 = $0.34

For the fourth month:

New principal = $50.67 + $0.34 = $51.01

Compound interest = P(1 + R)^nt - P = $51.01(1 + 0.00667)^1 - $50.67 = $0.34

For the fifth month:

New principal = $51.01 + $0.34 = $51.35

Compound interest = P(1 + R)^nt - P = $51.35(1 + 0.00667)^1 - $51.01 = $0.34

For the sixth month:

New principal = $51.35 + $0.34 = $51.69

Compound interest = P(1 + R)^nt - P = $51.69(1 + 0.00667)^1 - $51.35 = $0.34

Learn more about annual

https://brainly.com/question/25842992

#SPJ11

which of the following is not a characteristic of services? part 2 a. standardized product b. intangible c. produced and consumed simultaneously d. unique

Answers

The answer to the question is the following :Option A (Standardized product) is not a characteristic of services. It refers to the fact that a service can be customised to meet the specific needs of a customer and that it can be delivered in a variety of ways.

Services are characterized by several characteristics. The five most common characteristics of services are as follows:

1. Intangibility2. Perishability3. Variability4. Inseparability5. Non-ownership of servicesStandardized product, on the other hand, is not a characteristic of services. A service can be tailored to meet the specific needs of a customer. It is delivered in a variety of ways.

A service is generally provided in a highly customized manner, which is tailored to the specific needs of the customer. The customization of a service is one of its most important attributes, as it allows the provider to meet the specific needs of the customer.

To know more about Standardized product visit:

https://brainly.com/question/24271635

#SPJ11

After the first year of tenancy, the landlord is permitted to retain a security deposit in a maximum amount equal to what?
One month rent
2 month rent
One month rent + last month rent and cleaning fee
No security deposit may be retained after the first year

Answers

After the first year of tenancy, the landlord is permitted to retain a security deposit in a maximum amount equal to one month rent. A security deposit is an amount of money paid by the tenant to the landlord at the beginning of a lease or rental agreement.

This amount acts as a safeguard for the landlord against any property damage or unpaid rent caused by the tenant during the lease period. Once the lease period is over, the landlord is required to return the security deposit to the tenant within a certain period of time. One such circumstance is when the tenant breaches the lease agreement.

This can include causing damage to the property, breaking lease terms, or leaving the property without notice. In these cases, the landlord can use the security deposit to cover the cost of repairing damages, unpaid rent, or other expenses related to the breach of lease terms. After the first year of tenancy, the landlord is permitted to retain a security deposit in a maximum amount equal to one month rent.

To know more about landlord visit:

https://brainly.com/question/29741978

#SPJ11

apache junction company is evaluating a capital expenditure proposal that requires an initial investment of $44,190, has predicted cash inflows of $9,000 per year for 13 years, and has no salvage value.

Answers

The Apache Junction Company is evaluating a capital expenditure proposal that requires an initial investment of $44,190, has predicted cash inflows of $9,000 per year for 13 years, and has no salvage value.

To evaluate the capital expenditure proposal, we need to calculate the net present value (NPV) and the payback period. Net Present Value (NPV): NPV is a financial metric used to determine the profitability of an investment by comparing the present value of expected cash inflows to the initial investment. To calculate the NPV, we use the formula

NPV = (Cash inflows - Initial investment) /

(1 + Discount rate) ^

Year In this case, the cash inflows are $9,000 per year for 13 years, and the initial investment is $44,190. However, we are not given the discount rate, so we cannot calculate the exact NPV without this information.

The payback period is the time it takes for the initial investment to be recovered through the expected cash inflows. To calculate the payback period, we divide the initial investment by the annual cash inflow:

Payback period = Initial investment /

Cash inflows per year In this case, the payback period would be:

Payback period = $44,190 /

$9,000 per year = approximately 4.91 years Based on the information provided, we can conclude that the payback period for this capital expenditure proposal is approximately 4.91 years. However, without the discount rate, we cannot determine the exact net present value.

To know more about apache visit:

https://brainly.com/question/32941736

#SPJ11

Question 1 (Marks: 15) Cape Union Mart is one of the leading South African organisations targeting the outdoor enthusiast. Whether you are a hiker, camper or canoer, you are bound to find everything you need for your adventure here. Discuss why you believe the products sold by Cape Union Mart is a good example of an exportable product.

Answers

Cape Union Mart is an organisation based in South Africa that targets outdoor enthusiasts. If you're an individual who enjoys hiking, camping, or canoeing, you can find all of your adventure equipment at Cape Union Mart.

Exportable products are those that can be produced in one country and sold in another. It means that the goods or services can be traded across international borders without violating any customs or tariffs. Quality is crucial to the export market because people are willing to pay for goods that last longer, perform better, and are reliable.

As a result, these products are likely to attract customers from other countries, as they may not be able to purchase similar products from their home country.In conclusion, the products sold by Cape Union Mart are an excellent example of exportable products because they are high-quality, reasonably priced, and unique to the South African market.

To know more about enthusiasts visit:

https://brainly.com/question/32687918

#SPJ11

Find APYs (expressed as a percentage, correct to three decimal places). Then compare them to find the best investment option for 1 year. 4 banks offer CD. The first bank offers 4.96% compounded monthly. The second bank offers 4.95%
‘compounded daily. The third bank offers 4.97% compounded quarterly. The fourth bank offers 4.94% compounded continuously.
Either the first or the second bank
The second bank
Either the first or the third bank
The fourth bank
The first bank
The third bank
Either the third or the fourth bank

Answers

APY (Annual  Yield) is a financial metric that reflects the amount of interest earned on a deposit account over a year.

To compare the CD offers, we need to find the APYs for each bank and then select the one with the highest APY. Here's how to do it. The formula to find APY is
APY = (1 + r/n)n - 1,

where r is the annual interest rate, and n is the number of compounding periods per year.

For the first bank, r = 4.96% and n = 12 (monthly compounding).
APY = (1 + 0.0496/12)12 - 1

= 5.066%
For the second bank, r = 4.95% and

n = 365 (daily compounding).
APY = (1 + 0.0495/365)365 - 1

= 5.057%
For the third bank, r = 4.97% and

n = 4 (quarterly compounding).
APY = (1 + 0.0497/4)4 - 1

= 5.072%.

To know more about financial visit:
https://brainly.com/question/20123742
#SPJ11

John, an investment adviser, tells Lisa that if she's willing to invest the amount of $100 today, he can increase this investment by 5 times in 5 years. What annual rate of return is John promising on this investment?

Answers

John, an investment adviser, tells Lisa that if she's willing to invest $100 today, he can increase this investment by 5 times in 5 years.

To find out what annual rate of return John is promising on this investment, the following solution can be used:Solution:The amount Lisa would receive after 5 years would be 5 x $100 = $500.Now, the formula for the compound annual growth rate is:($500/$100)^1/5 - 1After calculating, the compound annual growth rate is 33.22%. Therefore, John is promising Lisa a 33.22% annual rate of return on her investment. Answer:John is promising a 33.22% annual rate of return on Lisa's investment.

To know more about investment visit:

https://brainly.com/question/15105766

#SPJ11

Required information [The following information applies to the questions displayed below] The following is financial information describing the six operating segments that make up Fairfield. Inc. (in thousands): Consider the following questions independently. None of the six segments have a primarily financial nature. What volume of revenues must a single customer generate to necessitate disclosing the existence of a major customer? (Enter yc swer in dollars but not in thousands.) The following information applies to the questions displayed below.] The following is financial information describing the six operating segments that make up Fairfleid, inc. (in thousands: Consider the following questions independently. None of the six segments have a primarily financial nature. Now assume each of these six segments has a profit or loss (in thousands) as follows, which warrants separate disclosure?

Answers

The volume of revenues that a single customer must generate to necessitate disclosing the existence of a major customer can be calculated as follows:

Segment Revenue A 200,000B 400,000C 800,000D 100,000E 50,000F 150,000Total 1,700,000A single customer is considered a major customer if it generates 10% or more of the company's revenue. Therefore, we need to find the 10% of the total revenue.10% of 1,700,000 is:1,700,000 × 10% = $170,000Therefore, if a single customer generates revenues of more than 170,000, it is necessary to disclose the existence of a major customer.

Now, assuming each of the six segments has a profit or loss (in thousands) as follows, which warrants separate disclosure: Segment Profit/Loss A 25B 50C (40)D (10)E (5)F (15)Any segment that reports an operating loss of $20,000 or more warrants separate disclosure as per the accounting standards. Thus, Segment C is the only one that meets this criterion and warrants separate disclosure.

To know more about revenues visit :

https://brainly.com/question/33361969

#SPJ11

Direct Materials and Direct Labor Variance Analysis Shasta Fixture Company manufactures faucets in a small manufacturing facility. The faucets are made from brass, Manufacturing has 60 empiovees. Fach employee presently provides 35 hours of labor per week. Information about a production week is as follows: Required: Total standard cost per unit aboc. Round the cost per unit to two decimal places. - navarmine the direct materials pnce variance, direct materials ceantity vatance, and total direct ruterigls coit variance. Mound your anawers to the aeerest a negative number using a minus sign and an unfoverable variance as a postive number

Answers

The direct materials price variance is $2,100 U (Unfavorable), the direct materials quantity variance is $4,500 U (Unfavorable), and the total direct labor cost variance is $49,000 U (Unfavorable).

Direct materials price variance, direct materials quantity variance, and total direct labor cost variance are the variances calculated by Direct Materials and Direct Labor Variance Analysis. What is Variance Analysis?

Variance analysis is an important component of management accounting that helps companies to keep track of their expenditures. This analysis entails determining the difference between actual expenses and budgeted expenses for any given accounting period.

In Shasta Fixture Company's case, the total standard cost per unit is $23.50. Here is the solution to the question: Calculation of Direct Materials Price Variance: Actual Cost = 80,000 ÷ 10,000 = $8 per pound

Actual Quantity = 10,500 pounds

Price Variance = (10,500 * $10) - (10,500 * $8) = $21,000 - $18,900 = $2,100 U (Unfavorable)

Calculation of Direct Materials Quantity Variance: Actual Cost = 80,000 ÷ 10,000 = $8 per pound

Standard Cost = $9 per pound Actual Quantity = 10,500 pounds

Quantity Variance = (10,500 * $9) - (10,000 * $9) = $94,500 - $90,000 = $4,500 U (Unfavorable)

Calculation of Total Direct Labor Cost Variance: Standard Hours = 3,500 * 35 = 122,500

Actual Hours = 3,360 * 35 = 117,600

Standard Rate per Hour = $14

Total Direct Labor Standard Cost = 122,500 * $14 = $1,715,000

Actual Rate per Hour = $15Total Direct Labor Actual Cost = 117,600 * $15 = $1,764,000

Total Direct Labor Cost Variance = Actual - Standard = $1,764,000 - $1,715,000 = $49,000 U (Unfavorable)

Hence, the direct materials price variance is $2,100 U (Unfavorable), the direct materials quantity variance is $4,500 U (Unfavorable), and the total direct labor cost variance is $49,000 U (Unfavorable).

To know more about cost visit:

https://brainly.com/question/14566816

#SPJ11

Why is ethics critical to successful strategic planning in the
21st century?

Answers

In the 21st century, ethics is critical to successful strategic planning. Below are some of the reasons why ethics is critical to successful strategic planning: Ethics sets the tone for decision making: Ethical values and principles establish the tone and context for decision-making in strategic planning.

They also assist leaders in maintaining their principles and ensuring that their behaviour aligns with their organization's objectives. Ethical considerations should be a part of strategic planning discussions, as they can help establish a shared vision and guide decision-making.Corporate social responsibility is enhanced: Corporate social responsibility is a significant aspect of successful strategic planning in the 21st century. The focus on sustainability, responsibility, and environmental protection is one example. These responsibilities are critical to the long-term success of businesses in the 21st century, which rely on the support of their stakeholders, such as employees, consumers, and investors. Ethics helps businesses to balance their social responsibilities with their corporate objectives.Business risk is reduced: Ethical considerations can be a critical factor in assessing risk in strategic planning. Leaders who value ethical considerations when making decisions are more likely to be proactive in addressing the risks that they identify. Ethical considerations are also useful in crisis management and can assist companies in navigating through difficult times.Stronger organizational culture is developed: Organizations that place a strong emphasis on ethics have a better chance of developing a positive culture, which is critical to success in the 21st century. A strong ethical culture can enhance employee engagement, reduce turnover, and boost productivity.

To know more about Ethics visit:

https://brainly.com/question/26273329

#SPJ11

which of the following items is prepared at the end of the accounting period immediately before the financial statements are prepared?

Answers

At the end of the accounting period immediately before the financial statements are prepared, adjusting entries are prepared.What are Adjusting Entries Adjusting entries are entries made in accounting records at the end of a financial period to update income and expenditure accounts to reflect the true account balances.

These entries are used to change revenue and expense account balances, as well as assets and liabilities that are not recorded during daily transactions, such as depreciation and allowances for bad debt. Adjusting entries are prepared at the end of each accounting period after the unadjusted trial balance is drawn up to ensure that the company's financial statements accurately reflect the company's financial condition and results of operations.

The goal of adjusting entries is to ensure that a company's financial statements accurately reflect its income and expenses for the period under review. In general, adjusting entries are made to ensure that revenue, expenses, assets, and liabilities are correctly recorded. Adjusting entries must be recorded before the company's financial statements are prepared at the end of the accounting period. adjusting entries are made at the end of the accounting period immediately before the financial statements are prepared to ensure that the company's financial statements are correct.

To know more about expenditure visit:

brainly.com/question/30063968

#SPJ11

What is a passive continental margin? What features do they have?
A passive continental margin occurs where the transition from land to sea is not associated with a plate boundary. A passive continental margin has no tectonic activity. There is not a lot of geologic activity

Answers

A passive continental margin is a transition zone between the continent and the ocean. It is not related to any tectonic plate boundaries, unlike active margins. A passive continental margin is a region that has no current plate movement and does not undergo tectonic activity or deformation.

What are the features of passive continental margins?

Features of Passive Continental Margins:

The features of a passive continental margin include the following:

1. Broad Continental Shelf

The passive margin is a broad continental shelf, which extends away from the continent into the ocean. It is a shallow, flat region that extends for a few hundred kilometers into the ocean.

2. Sedimentary Deposits

The passive continental margin is abundant in sediments that are typically fine-grained and accumulate over a long period. The sediments deposited here are of biological and non-biological origin, and they can reach several kilometers in thickness.

3. Wide Continental Slope

The slope of the passive margin is much gentler than that of an active margin. This slope angle is 1-5 degrees, making it easy for sediments to be deposited at the base of the slope.

4. Continental Rise

The continental rise is a broad, gentle slope that forms at the base of the continental slope. The sediment accumulation and deposition rate decrease here.

5. Fewer Earthquakes

The passive continental margin is less prone to earthquakes compared to the active margin.

6. Passive Continental Margin  

The passive Continental Margin has no volcanic activity and no major seismic activity. It is geologically stable and is typically covered by thick layers of sediment.

Learn more about volcanic activity: https://brainly.com/question/30513717

#SPJ11

What is a threat to a company's security? The log management service on the antivirus server frequently fails. Employees have not been trained on the current company security policies. A competitor plants undetected malware on the company's PCl database serve Some of the organization's devices have outdated, unpatched software.

Answers

A threat to a company's security is any activity or event that could cause harm to a company's hardware, software, or data. It can come from a variety of sources, both internal and external. The following are examples of potential security threats:

1. The log management service on the antivirus server frequently fails.

2. Employees have not been trained on the current company security policies.

3. A competitor plants undetected malware on the company's PC database server.

4. Some of the organization's devices have outdated, unpatched software.

The threat to a company's security comes from different sources, which include internal and external sources.

Security threats refer to the possibility of loss, damage, or theft of digital assets like data, hardware, and software. Security threats come from different sources, including internal and external sources. Internal threats may include negligence on the part of employees, lack of proper security policies, or insufficient access controls. In contrast, external threats include cyberattacks, malware, and hacking attempts.

Security threats can be physical, technical, or administrative. Some of the common types of security threats include viruses, trojans, phishing, social engineering, malware, spam, adware, spyware, and identity theft. These threats can cause significant damage to an organization's systems and data.

The four examples of security threats provided in the question are as follows:

1. The log management service on the antivirus server frequently fails. This could mean that there are gaps in the antivirus software, which could lead to malware or other viruses penetrating the system.

2. Employees have not been trained on the current company security policies. This could mean that employees are not aware of how to secure their data, which could lead to data breaches.

3. A competitor plants undetected malware on the company's PC database server. This could result in loss or theft of data or a compromise of the company's IT infrastructure.

4. Some of the organization's devices have outdated, unpatched software. This could mean that there are gaps in the software that hackers could exploit to gain unauthorized access to the system.

Learn more about Security threats: https://brainly.com/question/29793052

#SPJ11

apple inc. reported revenues of 234 billion usd and net income of 53 billion usd in 2015. these figures represent a stunning annual growth in revenue and net income of 28 percent and 33 percent, respectively, for 2014. this information indicates the importance of using to evaluate company financial performance. group of answer choices historical comparisons financial ratios industry norms competitor analysis

Answers

By comparing the revenues and net income data from 2015 to the previous year, 2014, we can analyze the growth rate and evaluate the company's financial performance over time. Historical comparisons indicate the importance of using them to evaluate a company's financial performance. The correct option is A.

The details supplied regarding Apple Inc.'s sales and net income growth rates underline the significance of using historical comparisons to assess a company's financial performance. Analysts can determine patterns and gauge the company's growth by comparing the current year's numbers to those from the prior year.

The fact that revenue and net income have grown significantly in this instance suggests that Apple Inc. is on the right track. Other techniques and studies, such as financial ratios, industry standards, and competition analysis, can be used, nevertheless, to undertake a thorough examination of a company's financial performance.

Thus, the ideal selection is option A.

Learn more about financial performance here:

https://brainly.com/question/28287663

#SPJ4

Nadia Company expects to have a cash balance of $44,800 on January 1, 2020 . Nadia has budgeted the following for the first two months of the year 2020: 1. Collections from customers: January $90,000; February $110,100. 2. Payments to suppliers: January $40,300; February $49,700. 3. Direct labour: January $29,800; February $35,000. Wages are paid in the month they are incurred. 4. Manufacturing overhead: January $24,900; February $29,800. Overhead costs are paid as incurred. 5. Selling and administrative expenses: January $16,100; February $21,800. These costs do not include depreciation and they are paid as incurred. Sales of investments in January are expected to realize $10,000 in cash. Nadia Company wants to keep a minimum monthly 6. cash balance of $20,000. Prepare a cash budget for January and February.

Answers

The ending cash balance for January is $78,500, and for February, it is $72,300.

Cash Budget for January and February
Cash balance for January 1, 2020 = $44,800
Minimum monthly cash balance = $20,000
Collections from customers:
January = $90,000
February = $110,100
Payments to suppliers:
January = $40,300
February = $49,700
Direct labor:
January = $29,800
February = $35,000
Manufacturing overhead:
January = $24,900
February = $29,800
Selling and administrative expenses:
January = $16,100
February = $21,800
Sales of investments in January = $10,000
Cash collections for January and February:
January = $90,000
February = $110,100
Total cash available for January:
Opening balance = $44,800
Collections = $90,000
Investment sale = $10,000
Total cash available = $144,800
Total cash disbursements for January:
Suppliers = $40,300
Direct labor = $29,800
Manufacturing overhead = $24,900
Selling and administrative expenses = $16,100
Total cash disbursements = $111,100
Net cash inflow for January:
Total cash available = $144,800
Total cash disbursements = $111,100
Net cash inflow = $33,700
Ending cash balance for January:
Opening cash balance = $44,800
Net cash inflow = $33,700
Ending cash balance = $78,500
Total cash available for February:
Opening cash balance = $20,000 (minimum monthly cash balance)
Collections = $110,100
Total cash available = $130,100
Total cash disbursements for February:
Suppliers = $49,700
Direct labor = $35,000
Manufacturing overhead = $29,800
Selling and administrative expenses = $21,800
Total cash disbursements = $136,300
Net cash outflow for February:
Total cash available = $130,100
Total cash disbursements = $136,300
Net cash outflow = -$6,200
Ending cash balance for February:
Opening cash balance = $78,500
Net cash outflow = -$6,200
Ending cash balance = $72,300
Thus, the total cash available for January and February is $144,800 and $130,100 respectively.

The net cash inflow for January is $33,700, and for February, the net cash outflow is -$6,200.

The ending cash balance for January is $78,500, and for February, it is $72,300.

To know more about Manufacturing visit:

https://brainly.com/question/29489393

#SPJ11

Allegiant issues 6%,20-year bonds with a par value of $2,000,000 and semiannual interest payments. In each separate situation, determine whether the bond is issued at par value, at a discount, or at a premium.

Answers

Without knowledge of the current market interest rate, it is impossible to determine if the Allegiant bonds are issued at par value, at a discount, or at a premium.

We must contrast the coupon rate (6%) with the going market interest rate for equivalent bonds in order to establish if the bonds issued by Allegiant are being sold at par value, at a discount, or at a premium. The bond is issued at par value if the coupon rate matches the market interest rate. The bond is issued at a discount if the coupon rate is lower than the market interest rate. The bond is instead issued at a premium if the coupon rate is higher than the market interest rate.

It is impossible to say for sure if the Allegiant bonds are issued at par value, at a discount, or at a premium without knowledge of the current market interest rate.

Learn more about Allegiant bonds here:

https://brainly.com/question/29563892

#SPJ11

Which one of the following statements is not correct?
a) Overconfident CEOs are likely to exercise their ESOs nearer the ESO’s expiration date than non- overconfident CEOs
b) CEO’s overconfidence is likely to increase when it takes time before the outcome is revealed
c) Financial media seems to recognized how overconfident CEOs describe their business
opportunities
d) CEO’s overconfidence is one form of agency conflict between owners and managers

Answers

The statement that is NOT correct is c) Financial media seems to recognize how overconfident CEOs describe their business opportunities. A description of the correct statement has been discussed below.Overconfident CEOs are likely to exercise their ESOs nearer the ESO’s expiration date than non- overconfident CEOs: Financial media is not capable of recognizing CEO's overconfidence while describing their business opportunities.

This statement is correct. Overconfident CEOs believe that their firm's stock prices will rise in the future, hence the overconfidence in their abilities makes them postpone the exercise of their ESOs.CEO’s overconfidence is likely to increase when it takes time before the outcome is revealed: This statement is correct. CEOs become more overconfident when it takes a more extended period to observe the outcome of their decisions. CEO's Overconfidence is one form of agency conflict between owners and managers: This statement is correct. The agency conflict arises when the CEO’s interest is not aligned with the owner's interest, leading to a conflict of interest. CEO's Overconfidence is a type of conflict that arises due to CEO's overestimating their ability to make successful decisions. Therefore, option c) is NOT correct. Financial media is not capable of recognizing CEO's overconfidence while describing their business opportunities.

To know more about Financial media visit:

https://brainly.com/question/32328616

#SPJ11

Nominal GDP increased from roughly $13.5 trilion in 2006 to $18.5 trillion in 2016 . In the same period prices rose on average by roughly 18 percent. In percentage terms, real GDP increased by

Answers

Nominal GDP increased from roughly $13.5 trillion in 2006 to $18.5 trillion in 2016, while prices rose on average by roughly 18 percent in the same period.

Real GDP is a measure of the GDP adjusted for inflation (i.e., inflation-adjusted GDP). Nominal GDP and real GDP differ because nominal GDP is not adjusted for inflation, while real GDP is adjusted for inflation.In the given case, if we use the formula for calculating real GDP,

then it will be:Real GDP = Nominal GDP / Price Index*100%So, in this scenario, we can say that the Price Index will be 100% + 18% = 118%.Hence,Real GDP = $18.5 trillion / 118%*100%Real GDP = $15.68 trillionThus, in percentage terms, the real GDP increased by approximately 16.07%.

In real terms, the US economy increased by 16.07 percent from 2006 to 2016.

To know more about increased visit:

https://brainly.com/question/2285058

#SPJ11

Al else equal (price, risk-free, time to maturity, etcl, what is the effect on the futures price of an asset that pays some positive dividend whien compared to the futures price of an asset that pays no dividend? This depends on the size of the dividend compared to the price of the asset. The futures price of the dividend paying asset will be higher. The dividend yieid has no etfect on the futures price. The futures price of the dividend paying asset will be lower.

Answers

When the future price of an asset that pays some positive dividends is compared to that of an asset that pays no dividend, the effect on the future price depends on the size of the dividend compared to the price of the asset.

In general, a dividend is a sum of money paid regularly by a company to its shareholders out of its profits or reserves. It is typically paid annually or quarterly.

Future prices, on the other hand, are contracts to buy or sell assets at a predetermined price and at a future date. It's a way for investors to speculate on the future price of an asset. A futures contract is an agreement between two parties to buy or sell an asset at a predetermined price and at a future date.

In general, when the dividend of an asset is more significant than the price of the asset, the future price of the dividend paying asset will be lower than that of the asset that pays no dividend. In other words, a high dividend yield will lead to a lower futures price of the asset.

The reason is that the dividend reduces the value of the underlying asset, which, in turn, reduces the future price of the asset. On the other hand, if the dividend is less significant than the price of the asset, the future price of the dividend paying asset will be higher than that of the asset that pays no dividend.

Therefore, the effect on the futures price depends on the size of the dividend compared to the price of the asset.

To know more about asset visit:

https://brainly.com/question/14826727

#SPJ11

The data owner is most often described by all of the following except
A. Manager in charge of a business unit
B. Ultimately responsible for the protection of the data
C. Financially liable for the loss of the data
D. Ultimately responsible for the use of the data

Answers

A. Manager in charge of a business unit The data owner is typically described as someone who is ultimately responsible for the protection of the data, financially liable for the loss of the data, and ultimately responsible for the use of the data.

The data owner is not necessarily limited to being a manager in charge of a business unit. It can be an individual or a team designated with the responsibility of managing and safeguarding the data assets of an organization. The data owner ensures that appropriate data governance policies, procedures, and controls are in place to protect the data, comply with regulations, and make informed decisions regarding the use of the data. A business unit is a distinct division or department within a larger organization that operates semi-independently and focuses on specific business functions or activities. It is typically responsible for managing a set of products, services, or markets. Business units often have their own dedicated resources, budgets, and objectives aligned with the overall goals of the organization. They have a level of autonomy to make decisions and execute strategies within their assigned area. Business units are commonly structured based on product lines, geographic regions, or customer segments, allowing for specialization, targeted marketing, and efficient resource allocation. Effective coordination and collaboration between business units are vital for overall organizational success.

Learn more about business unit here:

https://brainly.com/question/31359408

#SPJ11

Find the future value of an ordinary annuity of $60 paid at the end of each quarter for 5 years, if interest is earned at a rate of 4%, compounded quarterly. The future value is : (Round to 2 decimal places.) Find the future value of an ordinary annuity of $600 paid at the end of each year for 2 years, if interest earned at a rate of 3%, compounded annual. The future value is $ (Round to 2 decimal places.)

Answers

The future value of an ordinary annuity of $60 paid at the end of each quarter for 5 years, if interest is earned at a rate of 4%, compounded quarterly. The future value is: Future Value = $600 x (1.03^2 - 1) / 0.03 = $1,180.62

To calculate the future value of an ordinary annuity, we can use the formula:

Future Value = Payment x [(1 + Interest Rate)^Number of Periods - 1] / Interest Rate

For the first scenario, where $60 is paid at the end of each quarter for 5 years, with an interest rate of 4% compounded quarterly:

Payment = $60

Interest Rate = 4% or 0.04

Number of Periods = 5 years x 4 quarters/year = 20 quarters

Plugging the values into the formula:

Future Value = $60 x [(1 + 0.04)^20 - 1] / 0.04

Calculating this expression will give us the future value. Rounded to 2 decimal places, the future value is:

Future Value = $60 x (1.04^20 - 1) / 0.04 = $1,332.08

For the second scenario, where $600 is paid at the end of each year for 2 years, with an interest rate of 3% compounded annually:

Payment = $600

Interest Rate = 3% or 0.03

Number of Periods = 2 years

Using the same formula:

Future Value = $600 x [(1 + 0.03)^2 - 1] / 0.03

Calculating this expression will give us the future value. Rounded to 2 decimal places, the future value is:

Future Value = $600 x (1.03^2 - 1) / 0.03 = $1,180.62

To learn more about, interest, click here, https://brainly.com/question/30393144

#SPJ11

Other Questions
Which sentence in this introduction paragraph is the thesis statement?. In your own words explain the following:The idea behind data dictionaryTypes of information data dictionary stores with an example of each type from our university example 31) The stockholders' annual report must include A) common-size financial statements B) an income statement C) an advance tax statement D) the margin of safety report Answer: B Diff: 1 Topic: The Stockholders' Report Learning Obj.: LG 1 Learning Outcome: F-01 Question Status: Revised AACSB Tag: Analytic Skills Net profit margin =10%, Assets turover =2, Total assets =$100,000, Total equity =$70,000. Using the DuPont system, find the ROE. Select one: a. 20% b. 28.57% c. 14% d. 1.42 times Use the following sample of numbers for the next 4 questions: a. What is the range? (1 point) b. What is the inter-quartile range? (2 points) c. What is the variance for the sample? (3 points) Show Your Work! d. What is the standard deviation for the sample? (1 point)x355610 you are evaluating a performance improvement project. you should consider the project a success if you find that: A construction company employs three sales engineers. Engineers 1,2 , and 3 estimate the costs of 30%,20%, and 50%, respectively, of all jobs bid by the company. For i=1,2,3, define E lto be the event that a job is estimated by engineer i. The following probabilities describe the rates at which the engineers make serious errors in estimating costs: P( error E 1)=01, P( crror E 2)=.03. and P(error(E 3)=,02 a. If a particular bid results in a serious error in estimating job cost, what is the probability that the error was made by engineer 1 ? b. If a particular bid results in a serious error in estimating job cost, what is the probability that the error was made by engineer 2 ? c. If a particular bid results in a serious error in estimating job cost, what is the probability that the error was made by engineer 3 ? d. Based on the probabilities, parts a-c, which engineer is most likely responsible for making the serious crror? The C quadrature rule for the interval [1, 1] uses the points at which T-1(t) = 1 as its nodes (here T-1 is the Chebyshev polynomial of degree n 1). The C3 rule is just Simpson's rule because T2(t) = 2t2 -1.(a) (i) Find the nodes and weights for the Cs quadrature rule.(ii) Determine the first nonzero coefficient S; for the C5 rule.(iii) If the C5 rule and the five-point Newton-Cotes rule are applied on the same number of subintervals, what approximate relationship do you expect the two errors to satisfy?(iv) Suppose that the C's rule has been applied on N subintervals, and that all of the function evaluations have been stored. How many new function evaluations are required to apply the C rule on the same set of subintervals? Justify your answer. you are the ceo of a car manufacturing company, and realize that you may have to lay off 10,000 employees unless you take some other form of action. your chief financial officer comes up with two solutions: the first saves 6,000 jobs, and the second causes the company to lose 4,000 jobs. the first option sounds ideal at first; however, both options give the same outcome of cutting 4,000 jobs and saving 6,000 jobs. this example represents the concept of: Harold Hill borrowed $16,700 to pay for his child's education at Riverside Community College. Harold must repay the loan at the end of 6 months in one payment with 321% interest. a. How much interest must Harold pay? Note: Do not round intermediate calculation. Round your answer to the nearest cent. b. What is the moturity value? Note: Do not round intermediate calculation. Round your answer to the nearest cent. adhd is often treated with the ________ drugs ritalin and adderall. At the beginning of the year 1995, the population of Townsville was 3754. By the beginning of the year 2015, the population had reached 4584. Assume that the population is grr g exponentially, answer the following.A) Estimate the population at the beginning of the year 2019. The population at the beginning of 2019 will be aboutB) How long (from the beginning of 1995) will it take for the population to reach 9000? The population will reach 9000 about years after the beginning of 1995.C) In what year will/did the population reach 9000?The population will (or did) hit 9000 in the year. The strain gauge is placed on the surface of a thin-walled steel boiler as shown. The gauge is 0.5 in. long and it elongates 0.19(10-3) in. when a pressure is applied. The boiler has a thickness of 0.5in . and inner diameter of60 in.Est = 29(103) ksi,?st = 0.3. Determine the pressure in the boiler. Determine the maximumx,yin-plane shear strain in the material. for which of the regions shown in the figure is the observed effect the strongest? Which statement best describes what labor leaders George Meany of the AFL and Walter Reuther of the CIO believed about the role of unions?A) Meany believed unions needed to focus on the economic well-being of their members, while Reuther had more militant views on what unions should do regarding promoting racial equality and organizing members.B) Reuther believed unions needed to focus on the economic well-being of their members, while Meany had more militant views on what unions should do regarding promoting racial equality and organizing members.C) Meany supported a merger of the AFL and CIO, while Reuther opposed this merger.D) Both Meany and Reuther favored the Landrum-Griffin Act, which broadened government control over union affairs. Usable Security. Assume you are working as a cyber security consultant for the game development industry. You are tasked to develop a game-based app that teaches employees in a financial institution how to protect them from phishing attacks.1. Briefly explain your advice to develop appropriate teaching content (i.e., what to teach) in the gaming app to combat contemporary phishing attacks. 2. Briefly explain your strategy to get users (i.e., employees in financial institutions) to better interact with the gaming, app to improve their learning experience.3. Briefly explain how you assess the users learning (i.e., employees) through the game f(x,y,z)=(2,3,5,7) Make a circuit for f using only NAND or NOT gates. Draw a truth table. Why would it be help to create an alert specifically for UDP traffic? What kind of services run on the UDP protocol?Why would you want traffic to be logged for anything connecting to a database? How can this be considered a security concern if you do not log traffic? The customer, Chrysler Corporation, is requesting a batch of side mirrors be delivered by truck every four hours from the company you are making this value stream map for (Michigan Mirror Monopoly). Chrysler requires a total of 600 mirrors a day (300 left side and 300 right side). There is only one shift working at all of the plants. An ERP process is used in Production Control. The mirrors are entirely made of ABS plastic resin which comes from DuPont Chemical. Two tons of ABS resin is shipped by train three times a day from DuPont. Each mirror consumes five pounds of ABS resin. Chrysler sends the order via email as does Michigan Mirror Monopoly to DuPont. The ABS resin is injection molded into mirror housings with the assistance of two operators. It takes 10 seconds to produce a mirror. It takes 30 minutes to change dies from producing left mirrors to right mirrors, which is done once a day. The entire mirror producing facility is a push system. All companies have seven hours of work time. Lunches and breaks are separate and make for an eight hour work day (30 minutes for lunch and two 15 minutes breaks). Figure out the excess inventory between each process by calculating the cycle time for a 7 hour work day with an 80% uptime rate at each process. After the mirrors are injection molded, they are sent to the paint shop which can paint a mirror every 15 seconds (sprayed and baked). Two people work in the paint shop to monitor quality. There is no changeover time for this process because the spray guns are cleaned automatically. The painted mirrors are then assembled with the actual mirrors and electric motors and cabling. Assembly takes 60 seconds with three operators for each mirror. Production control members visit each process personally to make sure everything stays on schedule and to expedite certain shipments. Lastly, the mirrors are packaged and shipped in containers housing 30 parts which comes to a cycle time of 30 seconds for each part (HINT: this information is needed for the future state map). Please make a timeline of the mirror making operation with total cycle time and lead time (value added and non-value added time). For the future state map, you can do a number of things that we mentioned in class to shorten the total cycle time and lead time. There is no one correct answer; be creative. I want to see what you have learned. Use the examples in the PowerPoint slides for guidance. Show all your work and calculations so I know that you understand these maps and so I can award partial credit. The future state map should be a pull system and not a modified push system. No two future state maps should look alike so do your own work or you will receive a zero on this portion of the exam. Remember that examples of both maps with the work to calculate everything are in the Getting Started section of Blackboard at the bottom. Good luck and have fun with this. This allows me to see if you learned anything in this course. Thank you! in this assignment, you are required to write two classes:one that represents a TCPserver and the other represents a TCPclient. The operation of the program can be concluded in the client sending doublevalues to the server, and the server returning these doublessorted in ascending order.1.The server must bind to port number 3000, and keep on waiting for connections requests to be received from clients. The client must send thedoublevalues, which the server will send back to the client sorted in ascending order. In addition, the server keeps a log file named log.txt, in which it logs the date/time info and info of clients addressing (IP address in dotted decimal notation and port number) and their sorted numbers, each client on a new line as follows: date-time client-ip:client-port# sorted_numbers (space separated)2.The client must read the doublevalues from the user, until the user enters -1 (positive doublesare only assumed to be entered). It must send these doublevalues to the server, then wait for the server response. When the response is received, it must print the returned sorted numbers to the console.3.The server must be multi-threaded such that more than client connection can be handled at the same time Use a linear approximation to approximate 3.001^5 as follows: The linearization L(x) to f(x)=x^5 at a=3 can be written in the form L(x)=mx+b where m is: and where b is: Using this, the approximation for 3.001^5 is The edge of a cube was found to be 20 cm with a possible error of 0.4 cm. Use differentials to estimate: (a) the maximum possible error in the volume of the cube (b) the relative error in the volume of the cube(c) the percentage error in the volume of the cube