Answer:
Option 4
Explanation:
Calculate the volume (liters) of solution that can be prepared from 180. grams of K2Cr2O7 for a 0.200M solution.
Answer:
The volume of the solution is 0.305 liters.
Explanation:
Molar mass is the amount of mass that a substance contains in one mole. The molar mass of K₂Cr₂O₇ is 294 g / mole. Then you can apply the following rule of three: if by definition of molar mass 294 grams of the compound are contained in 1 mole, 180 grams are contained in how many moles?
[tex]moles=\frac{180 grams*1mole}{294 grams}[/tex]
moles= 0.61
Molarity is a measure of the concentration of a substance that is defined as the number of moles contained in a certain volume. So, the molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
molarity= 2 Mnumber of moles of solute= 0.61 molesvolume= ?Replacing in the definition of molarity:
[tex]2 M=\frac{0.61 moles}{volume}[/tex]
Solving:
[tex]volume=\frac{0.61 moles}{2 M}[/tex]
volume= 0.305 liters
The volume of the solution is 0.305 liters.
Four balls have the same temperature. Which ball has the most Thermal Energy? A.Golf ball(45g) B.Basket ball(625g) C.Bowling ball(5000g) D.Tennis ball(60g)
Answer:
b
Explanation:
b. ,u play with the ball, handle the ball grab the ball throw the ball exc.
Petroleum is a mixture of hydrocarbons. It is separated into useful fractions by fractional distillation.
Which property does fractional distillation rely on to separate petroleum?
Explanation:
Fractional distillation is used to separate crude oil into simpler, more useful mixtures . This method can be used because different hydrocarbons have different boiling points
Hope this help u
What volume of 15.9 M Nitric acid would be required to make 7.2 L of 6.00 M nitric acid? (hint: dilution problem) will mark brainliest if correct
a. 2.72 L
b. 686.88 L
c. .075 L
d. 272
Answer:
d
Explanation:
Juan Carlos placed 35 grams of ice into a dry, 200-gram container. The top
of the container was attached tightly. When the ice was completely melted, the
student measured the mass of the container with the liquid water. What should the
mass of the liquid water in the container be?
A. 35 grams
B. 165 grams
C. 200 grams
D. 235 grams
Mass of the liquid water in the container is 35 grams-
Mass doesn't depends upon the state of compounds.The mass of the liquid water in the container should be 35 grams.
Mass would not change during a change of state because the number of particles does not change during a state change. It does not matter if a substances freezes, boils, melts, sublimates.
So, the mass of liquid water in the container is the same as ice. Hence, the correct option is (A).
To know more about:-
brainly.com/question/11810264
Which statement about hydrocarbons is FALSE?
a
The number one use of hydrocarbons is as a fuel
source.
b
Most hydrocarbons we use today come from
sustainable, renewable sources.
с
Hydrocarbons are useful in industries from
transportation to road work to cosmetics.
d
The bulk of hydrocarbons we use today were
formed hundreds of millions of years ago.
Answer:
b
Explanation:
Hydrocarbons provide 84% of the world's energy, but they are non-renewable. Hydrocarbons are the most economic form of energy.
Tides are the rise and fall of surface levels of Earth's ocean water caused by the gravitational effects of which two celestial objects?
A)stars and planets
B)comets and meteors
C)earthquakes and volcanoes
D)moon and sun
Answer:
D)Moon and sunExplanation:
Because the gravitational pull of the moon is weaker on the far side of the Earth, inertia wins, the ocean bulges out and high tide occurs.
hope it helps:)
So3+H2o→H2 So4
use the oxidation numbers to identify the nature of this reaction redox or not
This is not an redox reaction because the oxidation number of Oxygen atom is not changing.
What is the difference between light photons and infrared photons?
Answer:
Light Photons: Light behaves mainly like a wave but it can also be considered to consist of tiny packages of energy called photons. Photons carry a fixed amount of energy but have no mass. The energy of a photon depends on its wavelength: longer wavelength photons have less energy and shorter wavelength photons have more.
Infrared photons: Infrared waves, or infrared light, are part of the electromagnetic spectrum. People encounter Infrared waves every day; the human eye cannot see it, but humans can detect it as heat. A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light, which marks the beginning of the non-visible spectrum, has a wavelength that falls between 700 nm and 1 mm. Because of this, infrared can only be viewed with specialized tools like security cameras.
What is infrared light ?A type of radiant energy that we experience as heat, but that is invisible to human eyes is infrared radiation (IR), often known as infrared light. The sun and fire are two of the most prominent sources of IR radiation, however all objects in the cosmos release some of it.
The energy of the photons determines the various types of radiation, starting with radio waves with low energies. In comparison to visible, ultraviolet, X-ray, and gamma ray photons, which are the most energetic of all, microwave photons have somewhat higher energy. Infrared photons have even more energy.
Cooler objects produce lower energy, longer wavelength photons, while hotter ones release higher energy, shorter wavelength photons.
Thus, On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light.
To learn more about infrared light, follow the link;
https://brainly.com/question/7071188
#SPJ2
PLEASE HURRY. compare the reactivitys of potassium and gold metals toward water, what happens when SO2 reacts with water?? write chemical
Answer:
See Explanation
Explanation:
The reactivity of a metal towards water depends on the position of the metal in the electrochemical series. Metals that are high up in the series do react violently and spontaneously with water. Metals that are lower in the series are sometimes unreactive in water.
Hence, potassium reacts very rapidly with water to yield KOH and hydrogen gas while gold does not react with water.
SO2 react with water to form sulphuric acid hence SO2 is called an acid anhydride.
The reaction occurs in the following steps;
2SO2(g) + O2(g) ------->2SO3(g)
SO3(g) + H20(l) ------>H2SO4(aq)
Which of the following wouldn't be a good tool to use when measuring pH values of solutions?
Question 8 options:
a)
litmus paper
b)
digital pH meter
c)
electrical conductivity meter
d)
pH paper
litmus paper
Because it will just tell if the solution is acidic or basic, it won't tell the pH
what has changed in the atmosphere that give the rock strata the appearance of rust?(red/orange color).
Answer:
Explained below.
Explanation:
What has changed in the atmosphere is that oxidation has occurred where an oxidizing chemical specie has reacted with an oxygen containing compound.
Now these chemicals when they react with rain and fall on rocks react with the rocks to weaken them in a process known as chemical weathering.
Now when this weathering from the oxidizing chemicals from the rain react with rocks that contain iron, it leads to the rock having an appearance of rust.
2AgNO3 (aq) + BaCl2 (aq)
-->
2AgCl (s) + Ba(NO3)2 (aq)
2AgCl (s) + Ba(NO3)2 (aq)
Fusion reactions power the _____ in space. Humans currently use fusion in _____ , but researchers are seeking more applications.
Answer:
Sun and the stars, nothing humans don't use fusion at all
Explanation:
Nuclear fusion reactions power the sun in space. Humans currently use fusion in nuclear weapons by means of nuclear reactions, but researchers are seeking more applications.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12649087
#SPJ7
What is the major difference, in terms of weathering type, between Albany, NY and Washington, D.C.? What might explain this difference?
The breakdown or dissolution of rocks and minerals of the planet's surface is called weathering it can be chemical, biological or physical.
Chemical weathering occurs in regions with high rainfall and high temperature.
In Albany, NY the temperature is 9°C with 98 cm rainfall while in Washington, DC the temperature is 15°C with 111 cm rainfall that is Washington is hotter compared to Albany so it will have chemical weathering.Water (rainfall) and temperature is the main cause of weathering as they loosen and breaks the mineral of rock surfaces.The rocks and minerals get dissolved in the water bodies because of erosion by which they get carried in oceans.Therefore, Albany will have mechanical while Washington will suffer from chemical weathering.
To learn more about weathering types follow the link:
https://brainly.com/question/516958
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
4.7257 - 3.12 = [?]
Answer:
1.61
Explanation:
I got this answer from a calculator and it's correct.
What is the mass in grams of 1.204 x 1024 molecules of
hydrogen gas (Hz)?
a 14.2 g
b 6.77 g
C 4.03 g
3.45 g
Which is true for a substance that releases energy?
OA. The energy release decreases the molecular motion and the kinetic energy of the substance.
B. The energy release decreases the molecular motion but increases the kinetic energy of the substance.
C. The energy release increases the molecular motion and the kinetic energy of the substance.
D. The energy release increases the molecular motion but decreases the kinetic energy of the substance.
E. The energy release is used only to change the state of the substance.
im I wrong on this question?
Answer:
I don't think so
Explanation:
That's what I got
I have a flask filled with water and on top a stopper .
I heat it over a flame .
after some time what will happen to the stopper
Answer:
A vacuum flask (also known as a Dewar flask, Dewar bottle or thermos) is an insulating storage vessel that greatly lengthens the time over which its contents remain hotter or cooler than the flask's surroundings. Invented by Sir James Dewar in 1892, the vacuum flask consists of two flasks, placed one within the other and joined at the neck. The gap between the two flasks is partially evacuated of air, creating a near-vacuum which significantly reduces heat transfer by conduction or convection.

The typical design of a Thermos brand vacuum flask, used for maintaining the temperature of fluids such as coffee.

Laboratory Dewar flask, Deutsches Museum, Munich

Diagram of a vacuum flask

A cryogenic storage dewar of liquid nitrogen, used to supply a cryogenic freezer
Vacuum flasks are used domestically, to keep beverages hot or cold for extended periods of time, and for many purposes in industry.
pls make me as brainliest
16) What is the acceleration of an object with a mass of 31.5 kg when an unbalanced force
of 223 N is applied to it?
Answer:
a= 7.07 m/s^2
Explanation:
Newton's second law of motion states that the acceleration of an object is produced by the net force.
the formula to calculate the force: F=ma
you just rearrange it to solve for a
a= F/m a=223/31.5
=7.07
HELP ASAP PLEASE CHEMISTRY
The rate of reaction was measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8 x10−6 M/s. Which of the following would you expect after another 3 seconds?
The rate would be lower, and the concentration of products would be higher.
The rate would be lower, and the concentration of products would be lower.
The rate would be higher, and the concentration of products would be higher.
The rate would be higher, and the concentration of products would be lower.
Answer:
The rate would be higher, and the concentration of products would be lower.
Explanation:
The correct answer is The rate would be lower, and the concentration of products would be higher.
The rate of reaction refers to the speed with which reactants are converted into products.
The rate of reaction decreases as the reaction progresses because more reactants are being converted into products.
As such, the reactant concentration decreases and the concentration of products increases.
Hence, after three seconds, the rate would be lower, and the concentration of products would be higher.
https://brainly.com/question/23761331
Find the hydroxide ion concentration [OH-] of an HCl solution with a pH of 6.93.
Answer:
[OH-] = 1.8 x 10^-7
Explanation:
pH + pOH = 14 --> 6.93 + pOH = 14 *subtract 6.93 from both sides
pOH = 7.07
-->
10^pH => 10^-6.93 => 1e - 6.93 [H+]
-->
H+ x OH- = 1 x 10^-6.93 *divide H+ from both sides
-->
[OH-] = 1.17 x 10^-7 or 1.8 x 10^-7
-Carbon and Oxygen combine to from carbon dioxide
Answer:
Carbon and oxygen combine to form two oxides, carbon monoxide and carbon dioxide in which the ratio of the weights of carbon and oxygen is respectively 12:16 and 12:32.
A group of 6th-grade students constructs arguments on why water conservation is important. Which student argument is correct?
A.
Student 1 argues that people need water for recreation and transportation only.
B.
Student 2 argues that as the population increases in the world, so does the need for water.
C.
Student 4 argues that we use less water for agriculture and more on personal needs.
D.
Student 3 argues that there is an unlimited supply of water for animals, ecosystems, and people to use daily.
From a chemicals standpoint, Student 2 contends that as global population grows, so does the need for water. This is the correct reasoning.
What is the purpose of chemistry?
Our basic needs of food, clothes, shelter, health, energy, and pure air, water, and soil are all met by chemistry. Chemical technologies improve our quality of life in many ways by offering fresh approaches to issues with health, resources, and energy use.
What subjects are studied in chemistry?
The study of matter, including its properties, behaviours, and structures, is known as chemistry. Chemists induce and monitor these reactions both in nature and artificially in a lab setting because they are interested in how materials behave and react in specific settings.
To know more about chemicals visit:
brainly.com/question/29240183
#SPJ1
In a neutral solution, the concentration of H+ is
Group of answer choices
Answer:
equal to [OH-]
Hydrogen ion concentration is more conveniently expressed as pH, which is the logarithm of the reciprocal of the hydrogen ion concentration in gram moles per liter. Thus, in a neutral solution the hydrogen ion (H+) and the hydroxyl ion (OH−)
What is the molarity of 15.0 milliliters of an unknown acid that is titrated
with a 1.25 M NaOH solution and required 24.65 milliliters of base to
complete the titration?
Answer:
~2.054M
Explanation:
In this question ,I am going to assume that the acid is monoprotic acid(contains only one hydrogen) which I'll represent by HA.
Chemical equation:
NaOH(aq) + HA(aq)----->NaA(aq) + H2O(l)
The mole ratio of NaOH:HA is 1:1
1.25M NaOH=1.25 Moles/L or 1.25 moles /1000ml of NaOH
(1.25 moles /1000ml) x (24.65ml)=0.0308125 moles NaOH
Mole ratio is 1:1
So, moles of HA are also 0.0308125 moles
volume of HA =15ml
To find molarity of HA:
=(0.0308125 moles x 1000ml)/(15ml)
~2.054M of HA
~Hope it helps:)
What two things combine with oxygen to form ground-level ozone?
A) NOx and ODS
B) CFCs and halons
C) NOx and VOC
D) HFCs and HCFCs
Answer:
c) NOx and VOC
oxides of nitrogen (NOx) and volatile organic compounds (VOC)
Explanation:
-
The drawing below was sketched by a student who was observing cells under a microscope. The cell is classified as
A prokaryotic
B eukaryotic
C periodic
D Nucleotic
Answer:
prokaryotic
Explanation:
I got it right
7. List all of the variables that you controlled or kept the same.
Salt water
Answer:
Temperature is a common type of controlled variable. If a temperature is held constant during an experiment, it is controlled. Other examples of controlled variables could be an amount of light, using the same type of glassware, constant humidity, or duration of an experiment.
Explanation: