Answer:
First Choice
it produces offspring with a large amount of genetic variation
Answer: i think this is correct.
Explanation: it occurs in simple organisms, such as bacteria, but not in multicellular organism such as plants and animals
Why is creativity important in scientific investigations?
a. Creative solutions are often needed to solve technical problems.
b. Scientists need to creatively adjust their data to prove their hypothesis.
c. There is no way to test a hypothesis, so creativity is necessary.
d. Most scientific experiments have no data.
Answer:
a. Creative solutions are often needed to solve technical problems.
Explanation:
Science in itself is a voyage of discovery. Scientific investigators focusing on various issues are often working hard to find creative solutions to complex technical problems.
In order to find solutions to all these problems bedeviling humanity, scientific investigators must be quite creative. Creativity is always at the bedrock of finding solutions to the complex technical problems of the world which happens to be the ultimate goal of science.
Hence, creativity is indispensable in scientific investigation and creative solutions are often needed to solve technical problems.
Answer:
a. Creative solutions are often needed to solve technical problems
Explanation:
Scientific investigation is the process using the scientific method which consists of empirical techniques in obtaining answers to question raised and used for driving the investigation
The scientist carrying out the investigation into the new area, is therefore required to be creative in adapting the available resources in answering the questions based on the scientific method
Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Answer:
Increased the concentration
Explanation:
Complete Question
Open the simulation by pushing the play button. Begin by dragging the concentration tester overto the liquid and add drink mix until the concentration reaches approximately 2.oo mol/L. This means there are 2.00 moles of the drink mix in 1 Liter of the solution. Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Solution
Drink mix is basically the solute which is added to solvent i.e water.
The higher is the amount of drink mix in the solvent, the higher is the concentration of the solute and hence darker is the color of the drink.
Hence, in the case the concentration of the drink has been increased.
If your end product is 1.5 moles of KMnO4, how many moles of manganese oxide were used in the reaction?
The equation for the production of potassium permanganate is as follows:
2 MnO2 + 4 KOH + O2 → 2 KMnO4 + 2 KOH + H2
You must show all work
Answer:
1.5 moles of KMnO4 will be produced from 1.5 moles of MnO2
Explanation:
The balanced equation of this chemical reaction is
2 MnO2 + 4 KOH + O2 → 2 KMnO4 + 2 KOH + H2
2 moles of MnO2 produces 2 moles of KMnO4
That means 1 moles of KMnO4 will be produced from 1 moles of MnO2
Hence, 1.5 moles of KMnO4 will be produced from 1.5 moles of MnO2
The moles of manganese oxide were used in the reaction is 1.5 moles.
What is stoichiometry?Stoichiometry of any reaction tells about the relative amount of species present before and after the chemical reaction.
Given chemical reaction is:
2MnO₂ + 4KOH + O₂ → 2KMnO₄ + 2KOH + H₂
From the stoichiometry of the reaction, it is clear that same moles of manganese oxide and potassium permanganate is involved in the reaction.
2 moles of KMnO₄ = produce by 2 moles of MnO₂
1.5 moles of KMnO₄ = produce by 2/2×1.5=1.5 moles of MnO₂
Hence, required moles are 1.5 moles.
To know more about moles, visit the below link:
https://brainly.com/question/24631381
How many representative particles are there in 10.43g of sugar (C12H22011)?
Answer:
10.43 / 342 × 6.02 × 10 ^23 = 18.34 × 10^ 21
Why is it important for scientists to use the scientific method?
Answer:
The scientific method attempts to minimize the influence of bias or prejudice in the experimenter. Even the best-intentioned scientists can't escape bias. ... That's the job of the scientific method. It provides an objective, standardized approach to conducting experiments and, in doing so, improves their results.
Answer:
to get used to them
Explanation:
you have to practice them so that they can get into your head
URGENT!!
which has the largest London dispersion force out of the ones listed
list the universities of nepal and explain about one of them.
Answer:
Tribhuvan University is a university in Tribhuvan, Nepal. Tribhuvan University (TU) is a pioneering higher education institution in Nepal, having been founded in 1959. ......
Pokhara University... Kathmandu University...
Purbanchal University is located in Purbanchal, India.
Lumbini Bauddha University (LBU) is a university in Lumbini, Nepal...
Nepal Sanskrit University is a university dedicated to the study of Sanskrit in Nepal.
Midwestern University is a public university in the Midwest...
Nepal Open University is a public university in Nepal.
Explanation:
Calculate the amount, in mol, of sodium atoms represented by 1.0x10(to the power of 20) sodium atoms
Explanation:
moles= number of particle or atom / 6.02×10^23
so
[tex] \frac{1.1 \times {10}^{20 } }{6.02 \times {10}^{23} } [/tex]
gives u 1.83×10^-4 moles
hope it make sense :)
Answer:
1.7 * 10^-4 moles
Explanation:
According to Avogadro, one mole of a substance contains 6.02 * 10^23 number of atoms, molecules, ions etc.
Hence;
1 mole of Na contains 6.02 * 10^23 atoms
x moles of Na contains 1.0x10^20 atoms
x = 1.0x10^20 * 1/6.02 * 10^23
x = 1.7 * 10^-4 moles
An atom of an element contains 12 protons, 12 neutrons, and 12 electrons. This element is in Group A) 1 B) 2 C) 6 D) 18
Answer:
B) 2
Explanation:
This is because the element in discussion is magnesium which has 12 protons and it falls in group 2 (the second column in periodic table)
Which elements are the transuranium elements? Use the periodic table link from the tools bar to answer the question.
those with atomic numbers from 93 to 118
those with atomic numbers 2, 10, 18, 36, 54, and 86
those with atomic numbers 3, 11, 19, 37, 55, and 87
those with atomic numbers from 89 to 103
Answer:
(A) those with atomic numbers from 93 to 118
Explanation:
got the answer from q**zlet. hope this helps :)
How to avoid the process of corrosion?
No Links please.
I needASAP!
Answer:
5 Different Types of Corrosion Prevention Methods
Barrier Coatings. One of the easiest and cheapest ways to prevent corrosion is to use barrier coatings like paint, plastic, or powder. ...
Hot-Dip Galvanization. ...
Alloyed Steel (Stainless) ...
Cathodic Protection. ...
EonCoat.
Balance the following equation:
-_MgCO3 → _MgO + __CO2
Answer:
Decomposition
Explanation:
Magnesite = Magnesium Oxide + Carbon Dioxide
Is this an alpha or beta decay?
____is the degree of hotness or coldness of a body or place
balance NaHCO3(S) -NaOH(S)+CO(G)
Answer:
NaHCO3(s) → NaOH(s) + CO2(g)
Explanation:
A balanced chemical equation is that in which the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side.
Based on the following equation below, each atom on the reactant side matches the ones on the product side, hence, the equation is said to be balanced. The balanced equation is as follows:
NaHCO3(s) → NaOH(s) + CO2(g)
(05.06 MC)
During an experiment, the percent yield of calcium chloride from a reaction was 85.22%. Theoretically, the
expected amount should have
grams What was the actual yield from this reaction? (5 points)
CaCO3 + HCI - CaCl2 + CO2 + H20
been 113
96.3 grams
О 99.0 grams
113 grams
0 121 grams
Answer:
96.3g is the actual yield from this reaction
Explanation:
Have been 113g...
The percent yield of a reaction is defined as one hundred times the ratio between actual yield (Our incognite) and the theoretical yielf (113g). The equation is:
Percent yield = 85.22% = Actual Yield / 113g * 100
0.8522 = Actual Yield / 113g
0.8522*113g =
96.3g is the actual yield from this reaction
Answer:
96.3
Explanation:
Just took the test
Global climate change is a result of human activity?
Answer:
Yes
Explanation:
Due to pollution, greenhouse gasses, etc
Humans are increasingly influencing the climate and the earth's temperature by burning fossil fuels, cutting down forests and farming livestock. This adds enormous amounts of greenhouse gases to those naturally occurring in the atmosphere, increasing the greenhouse effect and global warming.
what does the prefix non-represent?
O 9 carbon atoms, only
O 9 carbon atoms and 20 hydrogen atoms
O 9 carbon atoms and 18 hydrogen atoms
O 9 carbon atoms and 16 hydrogen atoms
Answer:
O 9 carbon atoms, only
Explanation:
Prefix: non- simply means 9.
Suffix: -ene means double bond, -yne means triple bond, and -ane means single bonded carbons.
What is the molarity when 25.0 g of the compound NaClO3 is placed in 85.0 mL of solution?
Answer: Molarity when 25.0 g of the compound [tex]NaClO_{3}[/tex]is placed in 85.0 mL of solution is 294.12 M.
Explanation:
Given: Mass = 25.0 g
Volume = 85.0 mL (1 mL = 0.001 L) = 0.085 L
Molarity is the number of moles of a substance divided by volume in liter.
Hence, molarity of given solution is calculated as follows.
[tex]Molarity = \frac{mass}{Volume (in L)}[/tex]
Substitute the values into above formula as follows.
[tex]Molarity = \frac{mass}{volume (in L)}\\= \frac{25.0 g}{0.085 L}\\= 294.12 M[/tex]
Thus, we can conclude that molarity when 25.0 g of the compound [tex]NaClO_{3}[/tex]is placed in 85.0 mL of solution is 294.12 M.
what is the ingredient formula for petroleum
Answer:
(C15H15N)
Explanation:
PLEASE HELP MEEEEEEEEEEEEE
Answer:
Explanation:
THE BEST ANSWER IS CCC
A sample of hydrogen gas collected by displacement of water occupied 30mL at 24 C on a day when the barometric pressure was 736t orr. What volume would the hydrogen occupy if it were dry and at STP? The vapor pressure of water at 24 C is 22.4 torr
Answer:
[tex]v_2=6,48*10^{-4}L[/tex]
Explanation:
From the question we are told that:
Volume of hydrogen [tex]V_1=30mL=>30*10^{-3}[/tex]
Temperature [tex]T_1=24C=>24+273=>297k[/tex]
Pressure of water [tex]P_1=22.4torr=>\frac{22.4}{760}=0.0295atm[/tex]
Let
STP(Standard Temperature and pressure)
[tex]T_2=273K[/tex]
[tex]P_2=1atm[/tex]
Generally the equation for ideal gas is mathematically given by
[tex]\frac{p_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
Therefore
[tex]v_2=\frac{P_1v_1T_2}{T_1P_2}[/tex]
[tex]v_2=\frac{0.0295*30*10^{-3}*273}{297*1}[/tex]
[tex]v_2=6.48*10^{-4}L[/tex] (at STP(Standard Temperature and pressure))
What is the molarity of a solution made from dissolving 3.0 moles of KCl in 500 mL of solution?
A. 750 M KCl solution
B. 3.0 M KCl solution
C. 0.06M KCl solution
D. 6M KCl solution
Answer:
najah zggs haihß hajoa ha8 a an àjàhajß
Find the moles of 127.5g of NaCl.
Answer:
n = 2.18 moles
Explanation:
Given that,
Mass = 127.5g
Molar mass of NaCl = 58.44 g/mol
We need to find the number of moles. We know that,
No. of moles = Given mass/molar mass
Put all the values,
[tex]n=\dfrac{127.5\ g}{58.44\ g/mol}\\\\n=2.18\ moles[/tex]
Hence, there are 2.18 moles of 127.5g of NaCl.
What is the approximate vapor pressure when the gas condenses at 70°C?
150
5
760
380
Answer:
380
Explanation:
I couldn't find the answer anywhere so this is the correct answer. I got it graded.
In a bakery shop, a chef bakes a cake in an electric oven. The energy outputted from the oven becomes an input to the cake system.
Which energy form is readily outputted from the oven system?
A. chemical energy
B. electrical energy
C. sound energy
D. thermal energy
How many grams does 2.1
moles of SnF, weigh?
Answer:
289.8g
Explanation:
Using the formula as follows:
mole = mass/molar mass
Molar mass of SnF = 119 + 19
= 138g/mol
Using mole = mass/molar mass
2.1 = mass/138
mass = 2.1 × 138
mass = 289.8g
Describe wildfires. How is climate change impacting wildfires ?
Answer:
Hey mate.......
Explanation:
This is ur answer......
Climate change has been a key factor in increasing the risk and extent of wildfires in the Western United States. Research shows that changes in climate create warmer, drier conditions. Increased drought, and a longer fire season are boosting these increases in wildfire risk. But global warming has changed some of the underlying variables that make wildfires more or less likely to occur every year. Warmer temperatures increase the likelihood that fires will burn more intensely. They also cause snow to melt sooner, and lead to drier soils, forests, and plants, which act as kindling.
Hope it helps!
Brainliest pls!
Follow me! :)
Help me with chemistry! I got this answer wrong , what would be the right one?
Answer:
I probably think it's to achieve a higher energy state
Explanation:
-
Which effects would many organisms likely experience if global warming occurs? Check all that apply.
disrupted food webs
increased competition
increased number of glaciers
disrupted life-cycle events
forced relocation
and any MHA fan to
Answer:
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Explanation:
Global warming refers to a gradual rise in the temperature of the earth due to the increase in the concentration of greenhouse gases in the atmosphere which trap infrared radiation close to the earth.
This gradual increase in the temperature of the earth often have devastating effects on the lives of various organisms on earth. These effects include;
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Due to changes that occur in the ecosystem as a result of global warming, many species may be compelled to relocate from place to place. This in turn disrupts food webs and may lead to disruption of life cycle events of the concerned organisms. Decrease in the number of certain populations due to global warming may lead to increased competition among species for food.