which of the following are true? (select all that apply). a full mesh topology is more scalable than the hub-and-spoke topology a full mesh topology is more fault-tolerance than the hub-and-spoke topology. client-server network is more scalable than peer-to-peer network. star topology requires more cable than ring topology. a logical topology describes how devices are connected to each other while a physical topology defines how devices communicate with each other.

The user should enable the wireless radio by pressing the proper function keys, and then they should try to connect to the wireless network.

Turning on the computer is the first thing to do. Locate and push the power button to accomplish this. Every computer has a power button, albeit it is located differently on each one. Your computer takes a while to start up after being turned on.

Your computer may start to lag, freeze, crash, or start to send error messages. If numerous programs are performing strangely and the issues continue even after rebooting, this is quite concerning.

To know more about  wireless network visit:-

https://brainly.com/question/14921244

#SPJ4

Question:-

A user called to inform you that the laptop she purchased yesterday is malfunctioning and will not connect to the wireless network. You personally checked to verify that the wireless worked properly before the user left your office. The user states she rebooted the computer several times but the problem still persists. Which of the following is the first step you should take to assist the user in resolving this issue?

A condenser microphone is a type of device that can be used as a little clip-on microphone or a premium studio microphone that runs on batteries or an external power source.

The type of mic that can be used as a miniature clip-on mic or a high quality studio mic is known as a condenser mic. It is a type of microphone that uses a condenser (or capacitor) to convert sound waves into electrical energy. These types of mics are known for their high sensitivity and accurate sound reproduction. They can be used in a variety of settings, including as a miniature clip-on mic for live performances or as a high-quality studio mic for recording. However, they typically require batteries or an external power source to function properly.

To learn more about Clip-on Mic Please click the given link:

https://brainly.com/question/24015857

#SPJ4

"If nothing we do in this world matters, then the only thing that matters is what we do." 19th century nihilism (of which Nietzsche and Kierkegaard are the most famous proponents).

What do you mean by nihilism?

Nihilism is a philosophical viewpoint that believes life is without objective meaning, purpose, or intrinsic value. It is often associated with extreme pessimism and a radical skepticism that condemns existing social and political values.

If there is no great glorious end to all of this, if nothing we do matters..., then what we do is all that matters. Because that is all that exists. This is what we do.

Nothing matters because we do not have control over the universe. We are limited as humans, and we will die. Everything is important because everything we do is related to what exists. Being helpful and kind, especially to people and animals, makes a difference in their lives.

The belief that nothing matters is known as nihilism. Existentialism is an attempt to confront and deal with meaninglessness...to avoid nihilism or despair: to avoid giving up or avoiding responsibility.

To learn more about nihilism refers to:

https://brainly.com/question/21704306

#SPJ4

The profit formula for this search engine company primarily consists of advertising revenue.

A search engine is an online tool used to locate information on the Internet. Search engines use algorithms to search the Internet for webpages containing certain keywords and phrases. Once the search engine finds these webpages, it stores them in a database and displays them as search results

This revenue is generated through the ads that appear on related searches, as well as the monetization of user data. The company also benefits from the sale of paid services such as translation and the storage of passwords in an encrypted form. Finally, the company may also generate revenue from the sale of sponsored links, which appear on its search engine results pages. Additionally, the company may benefit from faster load times and more accurate search results, which can lead to increased user satisfaction and higher user engagement.

To learn more about search engine
https://brainly.com/question/512733
#SPJ4

Answer: MACAFEE

Explanation:

Remote Access Trojan (RAT) is a kind of malware provides an attacker with administrative control over a target computer through a backdoor .

Malware called "remote access trojans" (RATs) allow an infected computer to be controlled from afar by an intruder. The attacker can send commands to the RAT and receive data in response once it is running on a compromised system.

A way to get into a computer system or encrypted data that gets around the system's usual security measures is called a backdoor attack. A backdoor can be created by a developer to allow access to an application, operating system (OS), or data for troubleshooting or other purposes. A backdoor is a type of malware that bypasses standard authentication to gain access to a system. As a result, an application grants remote access to resources like databases and file servers, allowing criminals to remotely issue system commands and update malware.

Learn more about backdoor attack:

brainly.com/question/14718381

#SPJ4

A server is computer hardware or software (computer program) that provides functionality to other programs or devices, known as "clients".

The required details for server in given paragraph

Client-server systems are typically implemented by (and often identified by ) ) the request-response model : The client sends a request to the server, which performs an action and sends a response back to the client, usually with a result or an acknowledgment.

void print2(int row) {

for (int i = 0; i < row; i++) {

char ch = 'a';

char print = ch;

for (int j = 0; j <= i; j++) {

cout << print++;

}

cout << endl;

}

}

int count_digits(int num) {

int count = 0;

int temp = num;

while (temp != 0) {

temp = temp / 10;

count++;

}

return (num % count);

}

The client-server model is the name of this architecture. Servers can provide various functions, often referred to as "services", such as B. sharing data or resources with multiple clients or performing calculations for one client. A single server can host multiple clients, and a single client can host multiple servers. The client process can run on the same

device or connect to a network on a server on a different device.

Typical servers are database servers, file servers, mail servers, print servers, web servers, game servers, and application servers.

To know more about servers visit:

brainly.com/question/7007432

#SPJ4

Since Alg1 is n squared, I am aware that it is the fastest of these algorithms. Alg2 is presumably the slowest because it is 2^n, which is known to perform very poorly, followed by Alg4 because it is n cubed.

An algorithm is a method used to carry out a computation or solve a problem. In either hardware-based or software-based routines, algorithms function as a detailed sequence of instructions that carry out predetermined operations sequentially.

Since Alg1 is n squared, I am aware that it is the fastest of these algorithms.

Thus,  Alg2 is presumably the slowest because it is 2^n, which is known to perform very poorly, followed by Alg4 because it is n cubed.

To know more about the algorithms, here

https://brainly.com/question/15802846

#SPJ4

Information about a student appears to be listed in this table, which includes their roll number (1), name (Naman), class (12), birthdate (1995-05-09), gender (male), and city markings (453 for the city of Anand).

What is a straight A student called?

A "straight A-student" is someone who performs well in every subject. Typically, it doesn't allude to how well somebody did in a particular class. It typically indicates that they received As in all of their courses. According to "broad observation," a "straight A" student is one who performs well in all areas.

Know more about city markings Visit:

https://brainly.com/question/12496038

#SPJ1

When I open the file in the program, I receive an error notice. as well as the choice to "Save a Copy" or "Discard Changes." true

Refresh is advised because there is a newer version of this file on the server. Given the choice to "Save a Copy" or "Discard Changes." You must erase the cache for the Microsoft Office application, thus Launch Finder. You can delete the "Data" folder by going to your profile or one of the following directories.

Refresh is advised because there is a newer version of this file on the server. You are attempting to edit a document while a different client (phone, tablet, or laptop) is also viewing it. The document is now only viewable.

To know more about file server visit:-

https://brainly.com/question/14760328

#SPJ4

Even though Bungie has highlighted that issue has indeed been rectified, a lot of players still have trouble with it. They look for answers in an effort to resolve this problem. They eventually discovered the answers in the Bungie.net forum, which other gamers had provided.

Way 1: Check if the PSN is down.

Way 2: Perform a power cycle on your router.

Way 3: Restart your PlayStation completely.

Way 4: Improve your Wi Fi speed.

Way 5: Update your router’s firmware.

Way 6: Modify your PlayStation DNS settings.

What causes the network error in Destiny 2?

If the problem still persists, players might want to try clearing the console cache or, if they're using a PC, the download cache. The problem could be fixed by restarting the router and/or internet modem. Check out our advice on reducing packet loss and latency to see if it can be of any assistance.

To know more about network visit:

brainly.com/question/15002514

#SPJ4

It helps organize large programs by breaking down the coding into small.

What is decomposing a user story?

The process of breaking down user stories into smaller, easier-to-manage chunks is known as story decomposition.

The word is used to define a method of analysis used to pinpoint the functional components of a system. It is derived from systems science and the philosophy of mathematics. The term "decomposition" is frequently used in discussions of software architecture.

This is a brief tutorial on how to break down a user story. There are several materials available that describe how to break down a user story. There is a similarity between this situation and the lunchtime learning session at the Perficient Denver office. This is merely a brief method to help moderate a forum; it is not rocket science. As a result, use the information in this article to plan your groom session. Also, exercise!

Read more about decomposing a user theory:

https://brainly.com/question/26389867

#SPJ4

Here is an example of a program in Java that prompts the user for 10 numbers, one at a time, and prints out the decoded message based on the code you provided:

import java.util.Scanner;

public class DecodeMessage {

public static void main(String[] args) {

Scanner scanner = new Scanner(System.in);

// Create a mapping of numbers to letters

char[] letters = {'D', 'W', 'E', 'L', 'H', 'O', 'R'};

int[] numbers = {1, 2, 3, 4, 5, 6, 7};

// Prompt the user for 10 numbers

StringBuilder decodedMessage = new StringBuilder();

for (int i = 0; i < 10; i++) {

System.out.print("Enter a number: ");

int input = scanner.nextInt();

// Check if the input is a valid number

boolean valid = false;

for (int j = 0; j < numbers.length; j++) {

if (input == numbers[j]) {

decodedMessage.append(letters[j]);

valid = true;

break;

}

}

// If the input is not a valid number, prompt the user again

if (!valid) {

System.out.println("Invalid number. Please enter a valid number.");

i--;

}

}

// Print the decoded message

System.out.println("Decoded message: " + decodedMessage.toString());

}

}

This program uses a Scanner to prompt the user for input, a StringBuilder to construct the decoded message, and two arrays letters and numbers to store the mapping of letters and numbers. The program uses a for loop to prompt the user for 10 numbers, and inside the loop, it checks if the input is a valid number (by checking if it exists in the numbers array) and, if it is, it appends the corresponding letter to the decoded message. If the input is not a valid number, the program prints an error message and the loop iterates again, prompting the user for a new number. Finally, it prints the decoded message.

The test input you provided will output "HELHOR"

The zone configured on the router should be the internal network zone, which is typically configured with an IP address range such as 10.0.0.0/24 or 192.168.0.0/24.

An Internet Protocol (IP) address is a numerical label assigned to a device connected to a computer network that uses the Internet Protocol for communication. An IP address serves two main purposes: host or network interface identification and location addressing. Every device on a network has a unique IP address that is used to communicate with other devices on the same network. IP addresses are typically represented in a dotted-decimal notation, such as 192.0.2.235, which is made up of four octets of eight binary digits (bits).

The router should also be configured with the external network zone, which is typically an IP address range such as 64.0.0.0/8 or 72.0.0.0/8. The router should also be configured with the IP address of the Internet Service Provider (ISP) gateway.

To learn more about IP address
https://brainly.com/question/14219853
#SPJ4

Below is an example of an M-file function called "rounder" that rounds a number x to a specified number of decimal digits, n:

function xr = rounder(x, n)

xr = round(x * 10^n) / 10^n;

end

This function uses the built-in round function in MATLAB to round the number x to n decimal digits. The number is first multiplied by 10^n to shift the decimal point, then rounded, and finally divided by 10^n to shift the decimal point back to its original position.

To test the program, you can use the following code:

x = [477.9587, -477.9587, 0.125, 0.135, -0.125, -0.135];

n = 2;

for i = 1:length(x)

   xr = rounder(x(i), n);

   fprintf('%.4f rounded to %d decimal digits is %.4f\n', x(i), n, xr);

end

This will round each of the numbers in the x array to 2 decimal digits and print the rounded number.

Therefore, You can change the value of n to round to the number of decimal points you want.

Learn more about function  from

https://brainly.com/question/19181382

#SPJ1

See full question below

Develop an M-file function called rounder to round a number x to a specified number of decimal digits, n. The first line of the function should be set up as function xr = rounder(x, n) Test the program by rounding each of the following to 2 decimal digits: x = 477.9587, −477.9587, 0.125, 0.135, −0.125, and −0.135.

The Internet Assigned Numbers Authority (IANA) oversees the management of the IP address space on a global scale, and five regional Internet registries (RIRs) are in charge of managing it in their respective regions for assignment to local Internet registries, such as Internet service providers (ISPs) and other end users.

A client/server protocol called Dynamic Host Configuration Protocol (DHCP) automatically assigns an Internet Protocol (IP) host with its IP address and other necessary configuration data like the subnet mask and default gateway.

Static IP addresses have the drawback of typically costing more than their dynamic counterparts. They are typically less secure than dynamic IP addresses, which is the other issue.

To know more about IP address visit:-

brainly.com/question/16011753

#SPJ4

when planning a turn, you must signal  around 30 meters (100 feet).

You can use your hand, arm, or the turn signals & brake lights on your car to signal.To give other vehicles enough time to prepare for your turn, you should indicate at minimum 100 feet in advance.To make sure your car's turn signals are functioning properly, check them frequently.

Turns should be made in the lane that is closest to the correct curb and should be completed in the same lane.Turn signalize.Give way to any pedestrians who may cross in front of you.Keep an eye out for any cyclists in your route.

To know more about planning visit:

https://brainly.com/question/13010835

#SPJ4

You could create an interactive story where the player controls a turtle and must navigate through a maze to reach the end. The maze could have obstacles such as walls and enemies that the player must avoid. The player would use the arrow keys to move the turtle in different directions.

Below is an example of how you could use the turtle module to create the game:

import turtle

# create the screen

screen = turtle.Screen()

# create the player turtle

player = turtle.Turtle()

player.shape("turtle")

# create the enemy turtles

enemies = []

for i in range(4):

   enemies.append(turtle.Turtle())

   enemies[i].shape("circle")

   enemies[i].color("red")

# create the walls

walls = []

for i in range(4):

   walls.append(turtle.Turtle())

   walls[i].shape("square")

   walls[i].color("gray")

# use for loops to position the enemies and walls in the maze

for i in range(4):

   enemies[i].penup()

   enemies[i].goto(...)

   walls[i].penup()

   walls[i].goto(...)

# use while loops to check for collisions with the enemies or walls

while True:

   player.forward(5)

   for i in range(4):

       if player.distance(enemies[i]) < 20:

           player.left(90)

   for i in range(4):

       if player.distance(walls[i]) < 20:

           player.right(90)

# use turtle methods such as shape, color, and forward to move the player turtle

player.shape("turtle")

player.color("green")

player.forward(100)

# use screen methods such as onkey to move the player turtle using the arrow keys

screen.onkey(player.left, "Left")

screen.onkey(player.right, "Right")

screen.onkey(player.forward, "Up")

screen.onkey(player.backward, "Down")

Learn more about animation  from

https://brainly.com/question/28218936

#SPJ1

a.SFTP. The most popular file transfer that utilizes SSH is the remote access permissions protocol (SFTP, short for "SSH File Transfer Protocol"), which is an extension of SSH.

Comparable to HTTP, or hyper text, that is the method for sending text like web pages, SSH, or Secure Shell, is a packet forwarding method that allows two computers simultaneously communicate and share data.

By establishing a private network (VPN) over TCP/IP-based data networks, the Point-to-Point Routing Protocol (PPTP) is indeed a network protocol that permits the secure movement of data from the a client computer to a private company server.

To know more about SFTP visit:

https://brainly.com/question/28086395

#SPJ4

Hackers conduct passive assaults by keeping an eye on systems and searching for openings or weaknesses that would allow them to steal information.

A cyber attack is any attempt to obtain unauthorized access to a computer, computing system or computer network with the aim to do damage. The goal of a cyber attack is to disable, disrupt, destroy, or take control of a computer system, as well as to change, block, delete, modify, or steal the data stored on it.

Active attacks involve the attacker attempting to alter the content of the message by intercepting the connection. In passive attacks, the attacker watches the messages, copies them, saves them, and subsequently can utilize them for bad intentions.

To know more about  sensitive information visit:-

https://brainly.com/question/28962905

#SPJ4

The technology behind the impending modern networking revolution is known as software-defined networking (SDN).

In order to communicate with the underlying hardware infrastructure and govern traffic on a network, Software-Defined Networking (SDN) requires software-based controllers or application programming interfaces (APIs).

The network can be intelligently and centrally controlled, or "programmed," using software applications, thanks to Software-Defined Networking (SDN), a network design technique. Regardless of the underlying network technology, this enables operators to manage the entire network uniformly and holistically.

To know more about software-defined networking visit :-

https://brainly.com/question/29386698

#SPJ4

True. Utility software includes the programs and applications that provide maintenance, support, and personalization to a computer.

This type of software is designed to help users maintain and optimize the performance of their computer system, such as by fixing errors, cleaning up junk files, improving security, and customizing settings. Utility software can also be used to improve the usability of a computer, such as by changing the appearance of the user interface or adding features.

Utility software is a type of computer software designed to help users maintain and optimize the performance of their computer system. It provides a range of tools and features to facilitate this, such as fixing errors, cleaning up junk files, improving security, and customizing settings. It can also be used to improve the usability of a computer, such as by changing the appearance of the user interface or adding features.

Utility software can be used to help automate tasks, increase productivity, and reduce the risk of data loss or security breaches.

Learn more about software:

https://brainly.com/question/28224061

#SPJ4

In Excel, Font group on the Home tab contains the command for changing the fill color of a cell.

What is Font group in Excel?

In Excel, the Font group is a collection of tools that allow you to change the appearance of text in a cell or range of cells. These tools include options to change the font type, size, color, and style (bold, italic, underline, etc.). They can be found in the Home tab of the ribbon in the Excel interface.

The Font group in Excel allows you to easily change the appearance of text in your worksheet to make it stand out or match a specific design. You can apply formatting to a single cell, a range of cells, or an entire column or row. By using the options available in the Font group, you can customize the text in your worksheet to make it more readable, engaging and professional looking.

To learn more about Excel, visit: https://brainly.com/question/24749457

#SPJ4

The manual is called Atmel-0856L-AVR-Instruction-Set-Other-11/2016. timing in relation to AVR (e). Interrupts during timed sequence are disabled by the Read Modify Write.

The Harvard design, which has distinct memories and buses for both programs and data, is the architecture used by AVR. Single level pipelining is used to execute instructions from program memory.

The main memory of the computer houses the programs that are run by the CPU (also called the RAM or random access memory). Memory can store data that is being utilized or processed by the program in addition to the program itself. Memory or I/O space locations are specified by base addresses. PCI DEVICE ID INTERG 2010 0x2010 is defined. the definition of PCI DEVICE ID SIIG 1S1P 20x 650 0x2011.

To know more about AVR Visit:-

https://brainly.com/question/15381488

#SPJ4

Answer:

An ellipsoidal spotlight with a cookie insert that projects the cookie's light pattern as a cast shadow is called a "Ellipsoidal Reflector Spotlight (ERS)" with "Cookie" or "Gobo" insert.

To fix this application failed to start because the side by side configuration is incorrect: Start > Control Panel > Add or Remove Programs should be chosen. Track down the programme by scrolling down.

When trying to launch an app in Windows, if you see the error message "The application has failed to start because its side-by-side setup is incorrect," this indicates that some prerequisites are missing and the programme cannot launch. The machine does not have the necessary files or components installed for the software to function. How can a side-by-side setup be fixed?

After selecting it, select Repair. Launch the software or perform the update once more when the repair procedure is finished.

Learn more about the configuration: https://brainly.com/question/9978288

#SPJ4

Since p-value is alpha in a non-graded scratchpad in integrated excel, use it as a non-graded workspace.

There are basically three ways to connect API to Excel: Power Query: Using an integrated feature in Excel, you may query data from APIs. Coupler.io: Using this third-party importer, you can programmatically export data to Excel using APIs.

You attempt to open a file that is present in a Group Policy-defined redirected folder or attempt to save a file to a redirected folder that Group Policy has defined. The Read Attributes permission is not established for you in the parent folder of the redirected folder.

To know more about Excel  visit:-

https://brainly.com/question/3441128

#SPJ4

Answer:yes

Explanation:provided on the right side of excel

The best choice is option (b). Antivirus software, disc defragmenters, and text editors are examples of utility software.

What is utility software ?

The software package is software system that aids in maintaining a computer system's correct and efficient operation. It supports the Operating System in managing, organising, maintaining, and maximising the computer system's performance. Utility software completes activities such as virus detection, installation and uninstall, data backup, and the eradication of unnecessary files, among others. Antivirus, file management tools, disc management tools, etc. are a few examples. An antiviral is a piece of useful software that aids in preventing computer viruses.

Additionally, it alerts users when malicious files are found and deletes them. Additionally, it examines any new hardware that is connected to the computer and removes any viruses that are found. Additionally, it periodically monitors the system for dangers and eliminates them.

Therfore the correct option is  b)Antivirus

To know more about utility software visit:

brainly.com/question/2909686

#SPJ1

Answer:

3

8

15

24

35

Explanation:

c starts at value 1 and sum at value 0, in the first loop c is added 2, so the value of c is now 3, then sum is added the value of c, so 0 + 3 = 3.

while checks if 3 is less than 10, it is, so the loop continues. Now 2 is added to the previous value of c, which was 3, so 3 + 2 = 5, c is now 5. c is added to the value of sum which was 3, so 3 + 5 = 8, sum is now 8 and the loop continues...

...after a couple of loops, c = 9, the while checks if 9 is less than 10, it is, so the loop continues one last time. 2 is added to c, so now c = 11. c is added to sum (which at this point has the value of 24), so now sum = 35 and the sum is printed on the screen. The while checks ones last time if 11 is less than 10, it is not, so the loop breaks and the last sum printed was 35.

Answer:

D) England without New England

Explanation:

Hope it helps! =D