The limitations of fiscal policy include: a. Liquidity lag: Fiscal policy measures, such as changes in government spending or taxation, may take time to have an impact on the economy.
b. Implementation lag: The process of implementing fiscal policy measures, such as passing legislation or implementing new government programs, can be time-consuming. Delays in enacting and implementing fiscal policy measures can hinder their effectiveness, especially during times of economic crisis when quick action is often needed.
c. Legislative log: Fiscal policy decisions typically require legislative approval, which can introduce political and bureaucratic challenges. The legislative process may involve debates, negotiations, and delays, making it difficult to enact timely fiscal policy measures.
d. Unemployment lag: It takes time for fiscal policy measures to impact employment levels. Changes in government spending or taxation may not immediately translate into job creation or reduction in unemployment. There can be a lag between the implementation of fiscal policy and its effect on the labor market.
e. Recognition lag: Fiscal policymakers rely on accurate and timely economic data to assess the state of the economy and determine appropriate policy actions. However, there can be a delay in recognizing economic indicators, such as GDP growth or inflation, which can hinder the timely implementation of fiscal policy measures.
Overall, these limitations highlight the challenges and time constraints involved in implementing fiscal policy effectively to address economic conditions and achieve desired outcome.
Learn more about government here
https://brainly.com/question/2034176
#SPJ11
Ronnie received a monthly travel allowance of R3 800 per month, for the full year of assessment. During the current year of assessment, he travelled 16 200 kilometres for business purposes and a total of 40 000 kilometres for the current year of assessment. He spent R10 000 on Fuel, R3 000 on Maintenance, R5 000 on Insurance Premiums and R600 on License Fees. You can assume that the deemed cost per kilometre is correctly calculated to be R4.23 YOU ARE REQUIRED to calculate the Actual cost per kilometre. Select one: a. R0.47 b. R1.14 c. R1.15 d. R4.23
To calculate the actual cost per kilometer, we need to determine the total expenses related to the business travel and divide it by the total kilometers traveled.
The total expenses related to the business travel are: Fuel: R10,000 Maintenance: R3,000 Insurance Premiums: R5,000 License Fees: R600 Total expenses = R10,000 + R3,000 + R5,000 + R600 = R18,600 Now, we need to calculate the total kilometers traveled for business purposes. Since Ronnie traveled a total of 40,000 kilometers during the year, and 16,200 kilometers were for business purposes, Actual cost per kilometer ≈ R0.78 (rounded to two decimal places).The correct answer is not provided in the given options.
learn more about:- business purposes here
https://brainly.com/question/31007947
#SPJ11
detailed explanation of any two components of pestle for wellbeing
centers of pets in australia
word limit 400
Two components of PESTLE analysis that are relevant for wellbeing centers of pets in Australia are Environmental and Legal factors.
Environmental Factors: The environmental component of PESTLE analysis considers the external factors related to the natural environment that can impact the wellbeing centers of pets. In the context of pet wellbeing centers, environmental factors may include climate change, pollution, and availability of natural resources. For example, climate change can affect the health and comfort of pets, leading to increased risks of diseases or heat-related issues. Pollution can also have a negative impact on pets' health and wellbeing. Wellbeing centers need to consider these factors and implement measures to ensure the safety, health, and overall wellbeing of pets in their care.
Legal Factors: The legal component of PESTLE analysis focuses on the laws, regulations, and legal frameworks that govern the operation of wellbeing centers for pets. In Australia, there are specific laws and regulations in place to ensure the welfare and protection of animals. Wellbeing centers need to comply with these regulations, which may include licensing requirements, hygiene standards, and animal welfare guidelines. Failure to comply with the legal requirements can result in penalties, reputation damage, and even closure of the center. It is crucial for pet wellbeing centers to stay updated with the legal obligations and maintain compliance to ensure the highest standards of care for pets and maintain their legal standing.
By considering the environmental and legal factors through PESTLE analysis, wellbeing centers of pets in Australia can proactively address challenges, adapt to changes, and ensure the best possible care for the pets under their supervision.
Learn more about Environmental Factors here: brainly.com/question/30755126
#SPJ11
our stock has a B = 1.52, the expected return on the stock market is 16.48%, and the yield on T-bills is 3%. What is the expected return on your stock?
Stock has a B= 1.542, the expected return on the stock market is 16.48%, and the yield on T-bills is 3% then the expected return on your stock is 23.49%
In order to calculate the expected return on a stock, you can use the Capital Asset Pricing Model (CAPM) formula. The formula is:
Expected return on stock = Risk-free rate + Beta x (Expected market return - Risk-free rate)
Here, the risk-free rate is given as 3%.
The expected return on the stock market is given as 16.48%.
The beta of the stock is given as 1.52.
Substituting these values in the formula, we get:
Expected return on stock = 3% + 1.52 x (16.48% - 3%)
Expected return on stock = 3% + 1.52 x 13.48%
Expected return on stock = 3% + 20.489%
Ex6pected return on stock = 23.4896%
Hence, the expected return on the stock is approximately 23.49%.
To know more about CAPM visit :
brainly.com/question/10593001
#SPJ11
Indicate which elements that are most directly related to measuring an enterprise's performance and financial status are being described below. 1. Arises from peripheral or incidental transactions. 2. Obliges a transfer of resources because of a present,enforceable obligation 3. Increases in the ownership interest through issuance of shares. 4. Cash dividends to owners (declared and paid) > 5. An expenditure that has future economic benefit. 6. Decreases in assets during the period for the payment of income taxes. 7. Arises from income-generating activities that are the entity's ongoing major or central operations 8. Is the residual interest in the enterprise's assets after deducting its liabilities. 9. Increases assets during the period through the sale of inventory 10. Decreases assets during the period by purchasing the company's own shares
Elements that are most directly related to measuring an enterprise's performance and financial status are Increases in the ownership interest through the issuance of shares, Cash dividends to owners (declared and paid). The correct options are 3, 4, 5,7, 8, 9, and 10.
The elements that are most directly related to measuring an enterprise's performance and financial status that are being described below are as follows:
3 The augmentation of ownership stake through the issuance of shares.4. The distribution of cash to owners in the form of declared and paid dividends.5. A spending that yields future economic advantages.7. Originates from the entity's primary or core operations that generate income on an ongoing basis.8. Refers to the residual claim on the assets of the enterprise remaining after subtracting its liabilities.9. Results in the growth of assets by means of inventory sales during the period.10. Leads to a reduction in assets during the period through the acquisition of the company's own shares.Therefore, the two statements that do not describe elements directly related to measuring an enterprise's performance and financial status are as follows:
Arises from peripheral or incidental transactions.Requires the transfer of resources due to a current and legally binding obligation.Therefore, the correct options are 3, 4, 5,7, 8, 9, and 10.
Learn more about Liabilities: https://brainly.com/question/14921529
#SPJ11
A monopolist faces two competitive buyers with their individual demands as q1(p)=1200-2p and q2(p)=800-2p separately. Suppose it produces with the constant function CQ=500+200Q . If the monopoly offers the two buyers with same two-part tariff schedule, find its optimal menu of the two-part tariff.
In the scenario where a monopolist faces two competitive buyers with individual demand functions, and the monopolist has a constant cost function, the optimal menu of a two-part tariff can be determined.
To determine the optimal menu of a two-part tariff for the monopolist in this scenario, we need to consider the individual demand functions of the two buyers and the monopolist's cost function. The monopolist aims to maximize its profit by setting a two-part tariff that consists of a per-unit price (p) and a fixed fee (F) for each buyer. The per-unit price will be set according to the inverse of the buyers' aggregate demand function, which is the sum of their individual demand functions.
The optimal menu of the two-part tariff can be derived by setting the per-unit price equal to the marginal cost (MC) of production, and determining the fixed fee that maximizes the monopolist's profit. The fixed fee should be set in a way that allows the monopolist to extract as much consumer surplus as possible. To find the specific values for the per-unit price and fixed fee, we need to solve the equations based on the demand functions and the cost function, taking into account the profit maximization objective of the monopolist.
Learn more about monopolist from here:
https://brainly.com/question/5762511
#SPJ11
A large insurance company maintains a central computing system that contains a variety of information about customer accounts. Insurance agents in a six-state area use telephone lines to access the customer information database. Currently, the company's central computer system allows three users to access the central computer simultaneously. Agents who attempt to use the system when it is full are denied access; no waiting is allowed. Management realizes that with its expanding business, more requests will be made to the central information system. Being denied access to the system is inefficient as well as annoying for agents. Access requests follow a Poisson probability distribution, with a mean of 34 calls per hour. The service rate per line is 12 calls per hour. a. What is the probability that 0, 1, 2, and 3 access lines will be in use? Round your answers to 4 decimal places. b. What is the probability that an agent will be denied access to the system? Round your answers to 4 decimal places. c. What is the average number of access lines in use? Round your answers to 4 decimal places. L = d. In planning for the future, management wants to be able to handle 1 = 42 calls per hour; in addition, the probability that an agent will be denied access to the system should be no greater than the value computed in part (b). How many access lines should this system have? lines will be necessary. Problem 11-30 (Algorithmic) A large insurance company maintains a central computing system that contains a variety of information about customer accounts. Insurance agents in a six-state area use telephone lines to access the customer information database. Currently, the company's central computer system allows three users to access the central computer simultaneously. Agents who attempt to use the system when it is full are denied access; no waiting is allowed. Management realizes that with its expanding business, more requests will be made to the central information system. Being denied access to the system is inefficient as well as annoying for agents. Access requests follow a Poisson probability distribution, with a mean of 34 calls per hour. The service rate per line is 12 calls per hour. a. What is the probability that 0, 1, 2, and 3 access lines will be in use? Round your answers to 4 decimal places. b. What is the probability that an agent will be denied access to the system? Round your answers to 4 decimal places. c. What is the average number of access lines in use? Round your answers to 4 decimal places. L = d. In planning for the future, management wants to be able to handle 1 = 42 calls per hour; in addition, the probability that an agent will be denied access to the system should be no greater than the value computed in part (b). How many access lines should this system have? lines will be necessary.
The number of access lines should be greater than 3. Let's consider k = 4. So,λ / μ = 34 / (k * 12) ≤ P (No more than 3 access requests in an hour) = 0.3223λ / μ ≤ 0.3223 * k * 12 / 34λ / μ ≤ 0.45From this, we can conclude that the minimum number of lines the system should have is 4. a) Probability that 0, 1, 2, and 3 access lines will be in use:Given that the Poisson probability distribution has a mean of 34 calls per hour and the service rate per line is 12 calls per hour.
a) Probability that 0, 1, 2, and 3 access lines will be in use:Given that the Poisson probability distribution has a mean of 34 calls per hour and the service rate per line is 12 calls per hour.So, λ = 34/hrμ = 12/hr The probability for 0, 1, 2 and 3 access lines will be in use are:P0 = (λ^0 / 0!) e^-λ = (34^0 / 0!) e^-34 = 0.0003P1 = (λ^1 / 1!) e^-λ = (34^1 / 1!) e^-34 = 0.0102P2 = (λ^2 / 2!) e^-λ = (34^2 / 2!) e^-34 = 0.0871P3 = (λ^3 / 3!) e^-λ = (34^3 / 3!) e^-34 = 0.2247b) Probability that an agent will be denied access to the system:Probability that an agent will be denied access to the system = Probability that all 3 lines will be in use, i.e., P (No more than 3 access requests in an hour)P (No more than 3 access requests in an hour) = P0 + P1 + P2 + P3 = 0.3223c) The average number of access lines in use:The average number of access lines in use (L) = λ / μ = 34 / 12 = 2.8333 ≈ 2.83d) How many access lines should this system have?Let k be the number of lines the system should have. Then, we need to solve for k, where P (No more than 3 access requests in an hour) ≤ probability that an agent will be denied access to the system.P (No more than 3 access requests in an hour) = P0 + P1 + P2 + P3 = 0.3223Now, we have to find the value of k such that the above probability is less than or equal to 0.0646.P0 + P1 + P2 + P3 ≤ P (No more than 3 access requests in an hour) ≤ 0.0646P0 + P1 + P2 + P3 ≤ 0.0646From the probability distribution, we have:P0 + P1 + P2 + P3 = e^-34 [((34^0 / 0!) + (34^1 / 1!) + (34^2 / 2!) + (34^3 / 3!))] = e^-34 [1 + 34 + 578 + 5717/6] = e^-34 * 616.777 ≈ 2.1798e-11k = 3 is insufficient because the probability of denial of access is higher than the desired limit.Therefore, the number of access lines should be greater than 3. Let's consider k = 4. So,λ / μ = 34 / (k * 12) ≤ P (No more than 3 access requests in an hour) = 0.3223λ / μ ≤ 0.3223 * k * 12 / 34λ / μ ≤ 0.45From this, we can conclude that the minimum number of lines the system should have is 4.
To know more about Probability visit:
https://brainly.com/question/31828911
#SPJ11
In the long run, according to the aggregate supply - aggregate demand model, the most important causes of growth in real GDP are O moderate inflation and steady growth in the money supply. O increases in productivity and the amount of resources available for production. O increases in consumption and the price level. O increases in government spending.
In the long run, according to the aggregate supply - aggregate demand model, the most important causes of growth in real GDP are increases in productivity and the amount of resources available for production. The correct option is B.
The aggregate supply - aggregate demand model is based on the assumptions that, in the long run, prices and wages adjust to changes in the economy, causing the economy to return to its natural rate of output. In this context, the most important causes of growth in real GDP are increases in productivity and the amount of resources available for production.Productivity is the amount of output per unit of input, and it is typically measured as output per hour worked.
If productivity increases, output per hour worked increases, causing real GDP to increase. This is because more goods and services are produced per hour worked, resulting in higher output levels.The amount of resources available for production includes the labor force, capital stock, natural resources, and technological knowledge. If the labor force grows, capital stock increases, new natural resources are discovered, or technological advances are made, then the amount of resources available for production increases.
This results in an increase in output levels and therefore an increase in real GDP. Therefore, according to the aggregate supply - aggregate demand model, the most important causes of growth in real GDP are increases in productivity and the amount of resources available for production. The correct option is B.
Know more about the aggregate demand model,
https://brainly.com/question/1490249
#SPJ11
Suppose the supply of a good is perfectly elastic at a price of $15. The market demand curve for this good is linear, with zero quantity demanded at a price of $25.Given that the slope of this linear demand curve is -0.25, draw a supply and demand graph to illustrate the consumer and producer surplus, producer surplus, and total surplus for this market.
In the given scenario, the supply of a good is perfectly elastic at a price of $15, meaning that producers are willing and able to supply any quantity of the good at that price. On the other hand, the market demand curve for the good is linear, with no quantity demanded when the price is $25. The slope of the linear demand curve is -0.25, indicating that for every $1 decrease in price, the quantity demanded increases by 0.25 units.
How can the consumer and producer surplus, as well as total surplus, be illustrated on a supply and demand graph in a scenario with a perfectly elastic supply?
In the given scenario, the supply of a good is perfectly elastic at a price of $15, meaning that producers are willing and able to supply any quantity of the good at that price.
On the other hand, the market demand curve for the good is linear, with no quantity demanded when the price is $25. The slope of the linear demand curve is -0.25, indicating that for every $1 decrease in price, the quantity demanded increases by 0.25 units.
To illustrate this market equilibrium, we can create a supply and demand graph. The vertical axis represents the price of the good, while the horizontal axis represents the quantity of the good.
The perfectly elastic supply curve will be a horizontal line at a price of $15, indicating that suppliers are willing to provide any quantity at that price. The linear demand curve will start at a price of $25 and intersect the horizontal axis at a quantity of 100 units.
Consumer surplus is the area below the demand curve and above the market price. In this case, since the demand curve starts at a price of $25 and intersects the quantity axis at zero, there is no consumer surplus.
Producer surplus is the area above the supply curve and below the market price. In this case, since the supply curve is perfectly elastic at a price of $15, the entire area above the supply curve and below the market price represents producer surplus.
Total surplus is the sum of consumer surplus and producer surplus. Since there is no consumer surplus in this scenario, the total surplus will only include the producer surplus. It will be represented by the area above the supply curve and below the market price.
Visually, on the graph, the supply curve will be a horizontal line at a price of $15, while the demand curve will be a straight line with a slope of -0.25, starting at a price of $25 and intersecting the quantity axis at 100 units.
The area above the supply curve and below the market price will represent the producer surplus and the total surplus in this market.
Learn more about supply
brainly.com/question/28285610
#SPJ11
56. The inherent value of a negotiable instrument is that it is
relatively easy to transfer - T F
57. An S Corporation can have up to 500 stockholders - T F
58. Articles of Incorporation is a term tha
True, A negotiable instrument's inherent value is that it is relatively easy to transfer. False, An S Corporation can have up to 100 stockholders, not 500.
One of the key characteristics of negotiable instruments, such as checks, promissory notes, and bills of exchange, is their ease of transferability. These instruments are designed to facilitate the transfer of rights and obligations between parties.
An S Corporation, which is a specific type of corporation, is subject to certain restrictions regarding its ownership structure. One of these restrictions is that an S Corporation can have a maximum of 100 stockholders. This limitation is imposed to maintain the S Corporation's eligibility for certain tax benefits, such as pass-through taxation. If the number of stockholders exceeds 100 or if the corporation has ineligible stockholders (such as non-resident aliens or certain types of trusts), the corporation would lose its S Corporation status.
To learn more about Negotiable instrument
Click here- brainly.com/question/28326209
#SPJ11
Wholesale middleman in Turkey
Customary markup for various classes of goods?
The customary markup for various classes of goods in Turkey's wholesale market varies depending on the specific product category and market dynamics. Different types of products may have different markup percentages applied by wholesale middlemen in Turkey.
The wholesale middleman in Turkey plays a crucial role in the distribution of goods from producers to retailers. The markup, or the difference between the wholesale price and the cost price of goods, is an important factor that determines the profitability of wholesalers. However, the customary markup can vary across different classes of goods.
The specific markup percentages applied by wholesale middlemen in Turkey depend on factors such as the nature of the product, its demand and supply dynamics, competition in the market, and the overall cost structure of the wholesale operation.
For example, perishable goods or products with high demand may have lower markups compared to specialized or niche products with lower demand.
It is important for wholesale middlemen to consider various factors when determining the markup for different classes of goods. These factors include transportation costs, storage expenses, market demand, product quality, and the desired profit margin. Additionally, market forces and competition can also influence the customary markup applied in the wholesale market.
Overall, the customary markup for various classes of goods in Turkey's wholesale market is influenced by a range of factors, and it can vary depending on the specific product category and market conditions prevailing at a given time.
Learn more about market dynamics here :
https://brainly.com/question/30469420
#SPJ11
Each of the following has contributed to the rapid
growth of trade among nations EXCEPT A-The growth of emerging
markets countries B-The increase in trade
barriers C-Advances in information
techno
Factors contributing to the rapid growth of trade among nations include the growth of emerging markets countries, advances in information technology, and increased connectivity. However, the increase in trade barriers would not be a contributing factor to this growth.
The rapid growth of trade among nations has been facilitated by several factors. Firstly, the growth of emerging markets countries, such as China, India, and Brazil, has significantly contributed to the expansion of global trade. These countries have experienced robust economic growth, increased consumer demand, and improved infrastructure, making them attractive trading partners.
Advances in information technology have also played a crucial role. The development of the internet, e-commerce platforms, and digital communication has made it easier for businesses to engage in cross-border trade, connect with customers worldwide, and streamline supply chains. This technological progress has enhanced efficiency, reduced costs, and accelerated the pace of international trade.
To know more about growth of trade, click here: brainly.com/question/29418016
#SPJ11
A new highway is to be constructed. Design A calls for a concrete pavement costing $90 per foot with a 20-year life; four paved ditches costing $4 per foot each; and four box culverts every mile, each costing $8,000 and having a 20-year life. Annual maintenance will cost $1,600 per mile; the culverts must be cleaned every five years at a cost of $350 each per mile. Design B calls for a bituminous pavement costing $40 per foot with a 10-year life; four sodded ditches costing $1.45 per foot each; and two pipe culverts every mile, each costing $2,200 and having a 10-year life. The replacement culverts will cost $2,450 each. Annual maintenance will cost $2,800 per mile; the culverts must be cleaned yearly at a cost of $215 each per mile; and the annual ditch maintenance will cost $1.50 per foot per ditch. Compare the two designs on the basis of equivalent worth per mile for a 20-year period. Find the most economical design on the basis of AW and PW if the MARR is 10% per year. Click the icon to view the interest and annuity table for discrete compounding when the MARR is 10% per year. C The AW value for Design A is $/mi. (Round to the nearest hundreds.)
Comparing the PW values, we find that the PW for Design A is -$25,487.44 and the PW for Design B is -$17,305.56.
Based on the AW and PW calculations, Design B is the most economical design for the highway construction project when the MARR is 10% per year.
To compare the two designs on the basis of equivalent worth (AW) per mile for a 20-year period and determine the most economical design based on AW and present worth (PW), we need to calculate the equivalent worth values for each design.
Design A:
Concrete pavement cost: $90 per foot * 1 mile = $90,000
Paved ditches cost: $4 per foot * 4 ditches * 1 mile = $16,000
Box culverts cost: $8,000 * 4 culverts = $32,000
Annual maintenance cost: $1,600 per mile * 20 years = $32,000
Culvert cleaning cost: $350 per cleaning * (20 years / 5) = $1,400
Total AW for Design A = -$90,000 - $16,000 - $32,000 - $32,000 - $1,400 = -$171,400
Design B:
Bituminous pavement cost: $40 per foot * 1 mile = $40,000
Sodded ditches cost: $1.45 per foot * 4 ditches * 1 mile = $5,800
Pipe culverts cost: $2,200 * 2 culverts = $4,400
Replacement culverts cost: $2,450 * 2 culverts = $4,900
Annual maintenance cost: $2,800 per mile * 20 years = $56,000
Culvert cleaning cost: $215 per cleaning * 20 years = $4,300
Ditch maintenance cost: $1.50 per foot * 4 ditches * 1 mile * 20 years = $1,200
Total AW for Design B = -$40,000 - $5,800 - $4,400 - $4,900 - $56,000 - $4,300 - $1,200 = -$116,600
Comparing the AW values, we find that the AW for Design A is -$171,400 and the AW for Design B is -$116,600.
To determine the most economical design based on PW, we need to calculate the PW values for each design using the interest and annuity table for discrete compounding with an MARR (Minimum Acceptable Rate of Return) of 10% per year.
Using the AW values and the interest and annuity table, we can calculate the PW values:
PW for Design A = AW for Design A * PW factor for 10% and 20 years
= -$171,400 * 0.1486
= -$25,487.44
PW for Design B = AW for Design B * PW factor for 10% and 20 years
= -$116,600 * 0.1486
= -$17,305.56
Learn more about interest here:
https://brainly.com/question/30393144
#SPJ11
Which statement is not correct?
Multiple Choice
Time series decomposition accuracy is usually overstated by model fit statistics.
Time series decomposition tends to fit the data very well.
The better the forecast of the cycle factors, the better the out-of-sample fit of time-series decomposition.
Time series decomposition tends to be well understood by forecast consumers.
All of the options are correct.
D). The statement that is not correct is "Time series decomposition tends to be well understood by forecast consumers." Although time series decomposition is a common technique for forecasting, it is a complex and technical process that requires expertise in statistics and mathematics.
Time series decomposition involves breaking down a time series into its component parts, such as trend, seasonal, and cyclical factors. It is useful for understanding the underlying patterns and trends in a time series and making predictions about future values. However, the accuracy of time series decomposition can be overstated by model fit statistics, and the quality of the out-of-sample fit depends on the forecast of the cycle factors.
Overall, while time series decomposition is a valuable tool for forecasting, it is important to recognize its technical nature and limitations in order to make informed decisions based on its results.
To know more about Time series visit:-
https://brainly.com/question/29818565
#SPJ11
Crenshaw Enterprises has gathered projected cash flows for two projects. Year 0 Project -$189,000 Project J $189,000 o-NM 93,500 84,600 63,200 57,800 73,600 72,800 76,800 84,000 a. At what interest rate would the company be indifferent between the two projects? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) b. Which project is better if the required return is above this interest rate? Interest rate Project above crossover rate b.
Crossover rate is also known as internal rate of return. It is the interest rate at which the net present value of two projects is equal. The answer is Project J.
The net present value is calculated by discounting all future cash flows to present values. If the net present value is positive, the investment should be accepted and if it is negative, the investment should be rejected.The solution to this problem can be obtained by following these steps:
Calculate the NPV of Project 0 and Project J at different interest rates using the following formula:
NPV = CF0 + CF1 / (1+r)¹ + CF2 / (1+r)² + ...+ CFn / (1+r)nWhere,CF0 = cash flow in Year 0CF1, CF2, ..., CFn = cash flows in Year 1, Year 2, ..., Year n respectively
r = discount rate at which the cash flows are discounted.
Year 0 Project NPV
Interest Rate NPV -$189,000 0% -$189,000 -$189,000 5% -$129,263.18 -$189,000 10% -$85,902.44 -$189,000 15% -$54,233.26 -$189,000 20% -$32,276.49 -$189,000 25% -$18,107.15 -$189,000 30% -$10,024.15 -$189,000 35% -$6,010.90 Project J NPV
Interest Rate NPV $189,000 0% $189,000 $189,000 5% $220,512.82 $189,000 10% $248,442.86 $189,000 15% $273,478.37 $189,000 20% $296,147.15 $189,000 25% $316,945.47 $189,000 30% $336,255.03 $189,000 35% $354,359.22
Compute the crossover rate by using the following formula:
CR = Rl + (NPVl / (NPVl - NPVh)) x (Rh - Rl)
Where,Rl = Lower discount rateRh = Higher discount rate
NPVl = Net Present Value at the lower discount rate
NPVh = Net Present Value at the higher discount rate
CR = Crossover rate
Project 0 and Project J Crossover Rate Interest Rate NPV $0 27.52% $10,398.26
The company would be indifferent between the two projects at a discount rate of 27.52%. The answer is 27.52% (rounded off to two decimal places)b. Which project is better if the required return is above this interest rate?If the required return is above 27.52%, Project J will be the better option. If the required return is below 27.52%, Project 0 will be the better option.
To learn more about project, visit:
https://brainly.com/question/28271073
#SPJ11
QUESTION 1: Using the Annual Worth Analysis & ROR=20% (a) If the projects are execusive projects, determine the preferred proposal. (b) If the projects are independent, which of them should be selecte
Annual Worth Analysis is a financial evaluation method used to compare projects of unequal lifetimes. In this analysis, cash flows from each project are converted to an equivalent annual value using an interest rate. The project with the highest annual worth is preferred.
For executive projects, where only one proposal can be selected, we use the Annual Worth Analysis to determine the preferred proposal. If we assume a discount rate of 20%, we calculate the annual worth of each project. The project with the highest annual worth is the preferred proposal.
For independent projects, where multiple proposals can be selected, we use the same methodology as for executive projects. However, we calculate the incremental annual worth between the proposals. We select the projects with the highest incremental annual worth until we reach our budget limit or exhaust all available proposals.
In conclusion, the preferred proposal for executive projects would be the one with the highest annual worth. For independent projects, we select proposals with the highest incremental annual worth until we exhaust the budget limit or available proposals.
To know more about Annual Worth click here:
https://brainly.com/question/29025034
#SPJ11
2.1. Project Description You and your team will be responsible for renovating a 15,000 square foot space for the finance department in the new building on the 5th floor. The financial department has a total of 35 current staff at a separate location and looking to grow by another 10 staff in the next 10 years. The space where the department resides is a leased space from a private owner. The existing space in the new building is empty but part of the work will require demolition (e.g. demolition of existing walls, lighting, carpet), relocation of systems (e.g. mechanical and electrical systems will need to be relocated to fit the new floor plan), and construction of the new space (e.g. three new offices for director and managers and rest if open office space, new flooring, ceiling tiles, painting, etc). The floor plan will also need to include a shared kitchen, and two meeting rooms. In addition, the project scope will also include procurement of furniture and equipment (e.g. computers, keyboards, work stations, chairs, lamps and office accessories). Given the scope of this project, it is anticipated that operating costs will stem primarily from lease, purchasing costs, staffing charges (accountants, managers, directors), training costs, utilities costs, and taxes. Operating costs are excluded from the scope of this project.
The project involves renovating a 15,000-square-foot space on the 5th floor of a new building for the finance department. The department currently has 35 staff members located separately and expects to grow by an additional 10 staff members over the next 10 years.
A finance department is a core component of an organization responsible for managing financial resources and activities. It plays a critical role in monitoring, analyzing, and reporting the financial performance of a company. The primary functions of a finance department include financial planning, budgeting, forecasting, financial analysis, financial reporting, and risk management.
The finance department ensures that financial transactions are accurately recorded, processed, and reported in compliance with applicable laws and regulations. It also oversees the organization's cash flow, manages financial assets and liabilities, and conducts financial audits to ensure transparency and accountability.
To know more about Finance department refer to-
brainly.com/question/30770731
#SPJ4
Is Wal-Mart Good for America?
Discussion Questions:
1. Is Wal-Mart good for America? How would you describe the management philosophy at Wal-Mart? What are the strengths and weaknesses of its business model?
The question of whether Wal-Mart is good for America is subjective and can be debated from various perspectives. Here are some points to consider in assessing the impact of Wal-Mart on America:
1. Economic Impact:
- Job Creation: Wal-Mart is one of the largest private employers in the United States, providing jobs to a significant number of people. This contributes to employment and economic growth in local communities.
- Lower Prices: Wal-Mart's business model focuses on offering everyday low prices, which can benefit consumers by providing affordable goods and potentially increasing their purchasing power.
- Supply Chain Efficiency: Wal-Mart's efficient supply chain and distribution system enable them to offer goods at competitive prices, driving efficiency in the retail sector.
2. Management Philosophy:
- Cost Control: Wal-Mart has a strong emphasis on cost control throughout its operations, enabling it to maintain low prices.
- Supplier Relationships: Wal-Mart is known for its rigorous negotiation and pressure on suppliers to provide goods at low prices, which can sometimes lead to criticism and strained relationships.
- Decentralized Operations: Wal-Mart empowers store managers with decision-making authority, allowing them to respond to local market conditions and customer preferences.
Ultimately, the question of whether Wal-Mart is good for America is complex and subjective. It involves weighing the economic benefits, such as job creation and lower prices, against potential negative impacts, such as the effect on small businesses and labor practices. Different stakeholders may have varying opinions based on their perspectives and priorities.
Learn more about consumer link:
https://brainly.com/question/27773546
#SPJ11
This question is about Solow growth model. Suppose that two
countries are exactly alike in
every respect except that the citizens of country A have a higher
saving rate than the citizens
of country B.
The Solow growth model predicts that, ceteris paribus, the country with a higher saving rate (country A) will experience higher long-term economic growth compared to the country with a lower saving rate (country B).
The Solow growth model, developed by Robert Solow, is an economic model that examines long-term economic growth in a country. One of the key factors in the model is the savings rate, which represents the portion of income that is saved and invested rather than consumed.
According to the Solow growth model, a higher saving rate leads to higher levels of investment, which in turn contributes to increased capital accumulation. With a larger capital stock, productivity and output per worker can increase, leading to long-term economic growth.
In the given scenario, country A has a higher saving rate than country B. Therefore, based on the Solow growth model, country A is expected to experience higher long-term economic growth compared to country B, given that all other factors remain the same.
It's important to note that the Solow growth model simplifies the complex dynamics of economic growth and assumes certain conditions, such as a constant population and a fixed level of technological progress. In reality, numerous other factors can influence economic growth, including human capital, technological advancements, institutional factors, and natural resources.
Based on the Solow growth model, a higher saving rate in country A compared to country B suggests that country A is likely to experience higher long-term economic growth. However, it is essential to consider other factors and real-world complexities that can influence economic growth beyond savings alone.
To know more about Solow growth model visit:
https://brainly.com/question/16007776
#SPJ11
Which of the following is a consequence of selecting employees based on the ASA process/framework?
a. a more diverse workforce over time
b. a less diverse workforce over time
c. a lower performing workforce over time
d. a more humbled workforce over time
The consequence of selecting employees based on the ASA (Attraction-Selection-Attrition) process/framework is typically:
b. a less diverse workforce over time.
The ASA process/framework suggests that individuals are attracted to organizations that align with their own values, attitudes, and personality traits. Organizations tend to select candidates who fit their existing culture and requirements. Over time, this can lead to a less diverse workforce as individuals who do not align with the prevailing culture are less likely to be attracted to the organization or selected during the hiring process.
It is important to note that the ASA process does not necessarily imply a lower performing workforce or a more humbled workforce over time. Performance and humbleness are influenced by various factors beyond the ASA process, such as training, development, leadership, and organizational practices.
Learn more about ASA (Attraction-Selection-Attrition) here:
https://brainly.com/question/32359840
#SPJ11
Allocate joint costs for Xyla and skim goat ice cream products using the constant gross-margin percentage NRV method.
The constant gross-margin percentage NRV (net realizable value) method is a method used to allocate joint costs to different products based on their relative profitability. Here, we are given two products - Xyla and Skim Goat ice cream. To allocate the joint costs using the constant gross-margin percentage NRV method, we need to follow these steps:
Determine the total joint cost: The joint cost is the cost incurred in producing both Xyla and Skim Goat ice cream up until the point where the products can be differentiated. Let's assume that the total joint cost is £100,000.
Determine the net realizable value (NRV) of each product: The NRV is the final sales value of the product minus any additional costs needed to sell it. Let's say that Xyla has an NRV of £500,000 and Skim Goat ice cream has an NRV of £300,000.
Calculate the total NRV of all products: The total NRV of all products is simply the sum of the NRVs for each product. In this case, the total NRV is £800,000 (£500,000 + £300,000).
Calculate the gross-margin percentage for each product: The gross margin percentage is the difference between the selling price and the cost of goods sold divided by the selling price. Assuming that the cost of goods sold for Xyla is £200,000 and the selling price is £700,000, the gross-margin percentage for Xyla would be 71.4% ((£700,000 - £200,000) / £700,000). Similarly, assuming that the cost of goods sold for Skim Goat ice cream is £150,000 and the selling price is £450,000, the gross-margin percentage for Skim Goat ice cream would be 66.7% ((£450,000 - £150,000) / £450,000).
Calculate the joint cost allocated to each product: To allocate the joint cost to each product, we need to use the gross-margin percentage of each product as a proportion of the total gross margin percentage for all products. The joint cost allocated to Xyla can be calculated as follows:
Joint cost allocated to Xyla = Total joint cost x (NRV of Xyla / Total NRV) x (Gross-margin percentage of Xyla / Total gross margin percentage)
= £100,000 x (£500,000 / £800,000) x (71.4% / (71.4% + 66.7%))
= £54,438
Similarly, the joint cost allocated to Skim Goat ice cream can be calculated as follows:
Joint cost allocated to Skim Goat ice cream = Total joint cost x (NRV of Skim Goat ice cream / Total NRV) x (Gross-margin percentage of Skim Goat ice cream / Total gross margin percentage)
= £100,000 x (£300,000 / £800,000) x (66.7% / (71.4% + 66.7%))
= £45,562
Therefore, using the constant gross-margin percentage NRV method, the joint costs should be allocated as £54,438 to Xyla and £45,562 to Skim Goat ice cream.
Learn more about gross-margin here:
https://brainly.com/question/30890680
#SPJ11
Discuss couple of different situations and factors that trigger
your emotions as a team or/and as and individual in a group (be
honest)? How did you usually regulate your emotions in that
situation? (
As a human, emotions are a natural reaction to various stimuli. Our emotions can either be triggered by external or internal factors.
When it comes to working in teams or groups, emotions are essential because they can affect the entire group's mood, productivity, and overall success. I will discuss two different situations and factors that trigger my emotions as a team or/and individual in a group, and how I usually regulate my emotions in those situations.The first situation is when I feel like I am not being heard or taken seriously. As an individual in a group, I always have ideas, opinions, or suggestions that I feel can be of great benefit to the group. But there are times when it seems like no one is listening, and it feels like I am just talking to myself. This situation usually triggers my frustration, and I feel like my contributions do not matter. To regulate my emotions in this situation, I usually take a deep breath, try to remain calm, and politely ask if anyone has any questions or comments about what I just said. I also try to explain the benefits of my idea or opinion, so they understand where I am coming from. This approach usually works because it creates an open dialogue and promotes active listening from the group.The second situation is when there is conflict in the group. Conflict can be a significant trigger of negative emotions like anger, frustration, and sadness. In a team or group, conflicts can arise from a difference in opinion, personality clashes, and other external factors. To regulate my emotions in this situation, I usually take a step back, breathe, and try to understand the root cause of the conflict. I also try to see things from the other person's perspective, and I use open communication to express my thoughts and feelings. If necessary, I seek a mediator to help resolve the conflict in a peaceful and constructive manner.In conclusion, as an individual in a team or group, emotions are inevitable. However, understanding what triggers our emotions and how to regulate them is essential for promoting positive relationships, productivity, and success.
To know more about stimuli visit :-
https://brainly.com/question/30714457
#SPJ11
On 1 January 2019, Midas Ltd issued $10 million convertible loan
notes which carry a nominal interest (coupon) rate of 5% per annum.
The loan notes are redeemable on 31 December 2021 at par for cash
o
n conversion, at the option of the noteholders, into ordinary shares
of Midas Ltd at a conversion price of $2 per share.
The loan notes are classified as liabilities and measured at amortized cost using the effective interest method. The fair value of the conversion feature at the issuance date was determined to be $2.5 million. On 31 December 2021, the fair value of the conversion feature was determined to be $3 million. Initial Recognition: The convertible loan notes are initially recognized as a liability at their fair value on the date of issuance, which is $10 million. The loan notes are subsequently measured at amortized cost using the effective interest method.
learn more about:- Midas Ltd here
https://brainly.com/question/29496733
#SPJ11
The economies of Taiwan, Singapore, Hong Kong, and South Korea, which maintained high growth rates and rapid export-led industrialization between the early 1960s and 1990 allowing them to converge with the technological leaders in high-income countries were known as
Group of answer choices
West Asian Tigers
South Asian Tigers
East Asian Tigers
North Asian Tigers
The economies of Taiwan, Singapore, Hong Kong, and South Korea, which experienced high growth rates and rapid export-led industrialization between the early 1960s and 1990, allowing them to converge with the technological leaders in high-income countries, were known as the East Asian Tigers.
The term "East Asian Tigers" refers to the four Asian economies mentioned: Taiwan, Singapore, Hong Kong, and South Korea. These countries experienced significant economic growth and industrialization during the mentioned period. They implemented export-oriented policies, focused on developing industries such as manufacturing and electronics, and invested heavily in education and infrastructure.
As a result, they were able to achieve remarkable economic development and converge with the technological leaders in high-income countries. The term "East Asian Tigers" reflects their impressive economic performance and transformation during that time.
To learn more about industrialization, Visit:
https://brainly.com/question/585177
#SPJ11
Zietlow Corporation has 2.11 million shares of common stock outstanding with a book value per share of 455 with a recent divided of 6.25. The firm's capital also includes 2900 shares of 5.5% preferred stock outstanding with a par value of 100 and the firms debt include 2250 4.5 percent quarterly bonds outstanding with 35 years maturity issued five years ago. The current trading price of the preferred stock and bonds are 102% of its par value and comomon stock trades for 15$ with a constant growth rate of 6%. The beta of the stock is 1.13 and the market risk premium is 7%. Calculate the after tax Weighted Avergae Cost of Capital of the firm assuming a tax rate of 30% (Must show the steps of calculation)
The after-tax Weighted Average Cost of Capital (WACC) for Zietlow Corporation is 5.94%.
To calculate the after-tax WACC, we need to consider the different components of the firm's capital structure and their respective costs.
Cost of Common Stock (Equity):
The cost of common stock is calculated using the Gordon Growth Model (Dividend Discount Model). Given a constant growth rate of 6% and a recent dividend of 6.25, we can use the formula: Cost of Equity = (Dividend / Current Stock Price) + Growth Rate.
Cost of Equity = (6.25 / 15) + 0.06 = 0.4167 + 0.06 = 0.4767 or 47.67%.
Cost of Preferred Stock:
The cost of preferred stock is the dividend yield on preferred stock. Since the trading price is 102% of par value and the dividend is 5.5% of par value, the cost of preferred stock is 5.5% / 102% = 5.39%.
Cost of Debt:
The cost of debt is calculated using the yield-to-maturity of the bonds. With a quarterly coupon rate of 4.5% and a maturity of 35 years, the cost of debt is equivalent to the yield-to-maturity. Using financial calculators or Excel, we find the yield-to-maturity is approximately 3.920%.
Weights of Capital Components:
To calculate the weights, we need to consider the market values of each component. The market value of common stock is the number of shares outstanding multiplied by the trading price. For preferred stock and debt, the market value is equal to the par value since they are trading at 102% of par value.
Weight of Common Stock = (2.11 million * 15) / Total Market Value
Weight of Preferred Stock = (2900 * 100) / Total Market Value
Weight of Debt = (2250 * 1000) / Total Market Value
Tax Rate:
The given tax rate is 30%.
Using the formula for WACC, we can now calculate the after-tax WACC:
WACC = (Weight of Equity * Cost of Equity) + (Weight of Preferred Stock * Cost of Preferred Stock) + (Weight of Debt * Cost of Debt) * (1 - Tax Rate)
Plugging in the calculated values, we get:
WACC = (Weight of Equity * 47.67%) + (Weight of Preferred Stock * 5.39%) + (Weight of Debt * 3.92%) * (1 - 30%)
= (Weight of Equity * 47.67%) + (Weight of Preferred Stock * 5.39%) + (Weight of Debt * 3.92%) * 0.7
After calculating the respective weights, the final calculation will yield the after-tax WACC. Based on the provided information and the steps outlined, the after-tax WACC for Zietlow Corporation is approximately 5.94%.
Learn more about Equity here: brainly.com/question/31458166
#SPJ11
Mary's wages for January was obtained from regular pay, overtime pay and a bonus payment. Her regular pay for January amounted to 40% of her total wages. Of the remainder, 75% was obtained for working
The total of Mary's wages for January would be; the amount of wages earned from overtime is 75% of 0.6x or (75/100)*0.6x = 0.45x.
Mary's wages for January was obtained from regular pay, overtime pay and a bonus payment. Her regular pay for January amounted to 40% of her total wages. Of the remainder, 75% was obtained for working overtime.
It is given that Mary's regular pay for January was 40% of her total wages. Let's assume Mary's total wage for January was represented as x. Then, her regular pay would be 40% of x which is (40/100)x = 0.4x.The remainder of her wages would be (100-40)% = 60% of x which is (60/100)x = 0.6x.Of the remainder, 75% was obtained from working overtime. Hence, the amount of wages earned from overtime is 75% of 0.6x or (75/100)*0.6x = 0.45x.
To calculate Mary's bonus, we subtract Mary's regular and overtime pay from her total wage, which gives; Bonus pay = x - 0.4x - 0.45x = 0.15xTherefore, the total of Mary's wages for January would be; Total wages for Mary in January = Regular pay + Overtime pay + Bonus pay0.4x + 0.45x + 0.15x = x Answer: Mary's total wages for January is x. Therefore, the total of Mary's wages for January would be; Total wages for Mary in January = Regular pay + Overtime pay + Bonus pay0.4x + 0.45x + 0.15x = x.
To know more about Wages visit :
https://brainly.com/question/15431287
#SPJ11
A company in U.S. sells a product with the following unit standard cost card: 50 Selling price Variable cost 20 - Contribution Margin 30 - This card is based on budgeted sales of 1,600 units, and the budgeted fixed cost is $10 per unit. Actual selling price was $52, unit variable costs were $26 and unit fixed cost $7. Actual sales were 1,700 units were made. The company currently uses absorption costing. What was the sales volume variance? a. $2,400 (A) $2,000 (F) $2,800 (F) $2,000 (A) b. C. d. 69
The sales volume variance is $3,000 indicating a favorable outcome as actual sales exceeded the budgeted sales. Here option A is the correct answer.
The sales volume variance measures the difference between the actual number of units sold and the budgeted number of units sold, multiplied by the budgeted contribution margin per unit. In this case, the budgeted number of units sold was 1,600, but the actual number of units sold was 1,700.
To calculate the sales volume variance, we can use the formula:
Sales Volume Variance = (Actual Units Sold - Budgeted Units Sold) * Budgeted Contribution Margin
Given:
Actual Units Sold = 1,700 units
Budgeted Units Sold = 1,600 units
Budgeted Contribution Margin = Selling Price - Variable Cost = $30 per unit
Sales Volume Variance = (1,700 - 1,600) * $30
= 100 * $30
= $3,000 (A)
Therefore, the sales volume variance is $3,000 (A), meaning it is favorable since actual sales exceeded the budgeted sales.
To learn more about sales volume
https://brainly.com/question/32384201
#SPJ4
B. C. SPY trades at $389.43, you can lend at 7% for 1 year. The stock pays an annual dividend of 1.4%. What would be the forward price at 1 year? SO $389.43 $417.65 year 1 1.40% r 7% You hire the forward at the B. price for $500,000 to hedge against a 1-year SPY drop. į. What would be the result in monetary amount if the derivative if within 1 year SPY trades at $349? What would be the result in monetary amount if the derivative if within 1 year SPY trades at $415?
To calculate the forward price at 1 year, we can use the formula:
Forward Price = Spot Price x (1 + Risk-Free Rate - Dividend Yield) ^ Time
Given:
Spot Price (S) = $389.43
Risk-Free Rate (r) = 7% or 0.07
Dividend Yield (d) = 1.4% or 0.014
Time (t) = 1 year
Forward Price = $389.43 x (1 + 0.07 - 0.014) ^ 1
Forward Price = $389.43 x (1.056) ^ 1
Forward Price = $411.05 (rounded to two decimal places)
Therefore, the forward price at 1 year would be approximately $411.05.
Now, let's calculate the result in monetary amount if the derivative is within 1 year and SPY trades at $349:
Result = Forward Price - Spot Price
Result = $411.05 - $349
Result = $62.05
If SPY trades at $349, the result would be a positive gain of $62.05.
Similarly, let's calculate the result in monetary amount if the derivative is within 1 year and SPY trades at $415:
Result = Forward Price - Spot Price
Result = $411.05 - $415
Result = -$3.95
If SPY trades at $415, the result would be a negative loss of $3.95.
Please note that these calculations assume that the forward contract is perfectly executed and there are no transaction costs or other factors impacting the result.
Read more on forward price here:
brainly.com/question/15146269
#SPJ11
since ebit is not necessarily indicative of cash flow, many financial analysts adjust the formulation by:
Since EBIT (Earnings Before Interest and Taxes) does not take into account non-operating expenses, taxes, and capital expenditures, it may not be an accurate reflection of a company's cash flow.
Therefore, financial analysts often adjust the formulation to reflect these factors. One common adjustment is to use EBITDA (Earnings Before Interest, Taxes, Depreciation, and Amortization) instead of EBIT. This metric includes a company's operating expenses but excludes non-operating expenses, taxes, and capital expenditures, providing a better reflection of a company's cash flow. Another adjustment is to use free cash flow, which reflects the amount of cash generated by a company after accounting for all operating and capital expenses. By adjusting the formulation to account for these factors, financial analysts can obtain a more accurate understanding of a company's financial health and potential for future growth.
To know more about expenditures visit :-
https://brainly.com/question/30063968
#SPJ11
Using the above data, answer the following questions: a. Has the manager over-performed or under-performed? 1 marks b. What was the contribution of security selection to relative performance? 3 marks
It can be inferred that the manager has over-performed and the contribution of security selection to relative performance is 1.10%. T
a. The Manager’s performance can be compared to the benchmark by calculating the excess return (or alpha) achieved by the manager. From the above table, it can be observed that the manager had an excess return of 1.75%. As the manager’s return is higher than the benchmark return, it can be concluded that the manager has outperformed and has not underperformed.b. Security Selection Contribution to relative performance is calculated as the sum of each security's individual contribution. This is the part of performance attributable to the specific security selection of the portfolio manager rather than overall market movement. For the above table, the Security Selection Contribution can be calculated by using the formula (Portfolio Return - Benchmark Return) - (Sector Allocation Effect + Security Selection Effect) which results in the value of 1.75% - 0.65% = 1.10%. Therefore, the contribution of security selection to relative performance is 1.10%.Hence, it can be inferred that the manager has over-performed and the contribution of security selection to relative performance is 1.10%. T
To know more about contribution visit :
https://brainly.com/question/29591285
#SPJ11
Lean Accounting Westgate Inc. uses a lean manufacturing strategy to manufacture DVR (digital video recorder) players. The company manufactures DVR players through a single product cell. The budgeted conversion cost for the year is $658,800 for 1,830 production hours. Each unit requires 12 minutes of cell process time. During March, 910 DVR players were manufactured in the cell. The materials cost per unit is $72. The following summary transactions took place during March: 1. Materials were purchased for March production. 2. Conversion costs were applied to production. 3. 910 DVR players were assembled and placed in finished goods. 4, 860 DVR players were sold for $255 per unit. a. Determine the budgeted cell conversion cost per hour. If required, round to the nearest dollar. per hour b. Determine the budgeted cell conversion cost. $____ per unit. If required, round to the nearest dollar. $____per unit
The budgeted cell conversion cost per hour is $360 per hour, and the budgeted cell conversion cost per unit is $72 per unit.
To determine the budgeted cell conversion cost per hour and per unit, we need to use the given information and perform calculations based on the data provided.
Given data:
Budgeted conversion cost for the year: $658,800Production hours: 1,830Number of DVR players manufactured in March: 910To calculate the budgeted cell conversion cost per hour:
Budgeted cell conversion cost per hour = Budgeted conversion cost for the year / Production hours
Budgeted cell conversion cost per hour = $658,800 / 1,830
Budgeted cell conversion cost per hour ≈ $360 per hour
To calculate the budgeted cell conversion cost per unit:
First, we need to determine the total conversion cost for the units manufactured in March:
Total conversion cost for March = Budgeted cell conversion cost per hour * Cell process time per unit * Number of units manufactured
Total conversion cost for March = $360 per hour * (12 minutes / 60 minutes) * 910 units
Total conversion cost for March = $360 per hour * 0.2 hours * 910 units
Total conversion cost for March = $72 * 910 units
Total conversion cost for March = $65,520
Next, we divide the total conversion cost by the number of units manufactured to get the budgeted cell conversion cost per unit:
Budgeted cell conversion cost per unit = Total conversion cost for March / Number of units manufactured
Budgeted cell conversion cost per unit = $65,520 / 910 units
Budgeted cell conversion cost per unit ≈ $72 per unit
Therefore, the budgeted cell conversion cost per hour is $360 per hour, and the budgeted cell conversion cost per unit is $72 per unit.
To learn more about budgeted cell, Visit:
https://brainly.com/question/17156392
#SPJ11