Answer:
a
Explanation:
Answer:
belongs to just one company or organization
Explanation:
edge 2021
Write a program which will -
• Enter the score the student got in the test.
• Enter the maximum number of marks for the test.
• Divide the score by the maximum to work out the percentage.
• Check to see if the percentage is greater than 52. If it is then say "well done you have at least a grade 5"
• If the percentage is less than 52 then display "Unlucky, you need to revise more for the next test."
Will give out brainliest :)
Answer:
down below
Explanation:
score = input() # gets student's score input
max = input() # gets max number
percent = (score/max)*100 # multiply by a hundred to get percentage
if percent > 52: # checks if percent is greater than 52
print("well dont you have at least a grade 5")
else # if percent is less than or equal to 52 it will print this instead
print("Unlucky, you need to revise more for the next test.")
THIS PART IS NOT CODE:
make sure you indent/tab the print statements or else you'll get an error
lenny joggy along a trail for 1.35 hours he ran at a pace of 3.2 miles per hour. how far did lenny jog?
Answer:
Lenny jogged along a trail for 1.35 hours. He ran at a pace of 3.2 miles per hour. How far did Lenny jog? Answer Lenny jogged 4.32 miles.
Explanation:
What is the output for the following program?
numA = 4
while numA <12:
numA = numA + 3
print(numA)
Output:
Answer:
13
Explanation:
int numA = 4;
whilie (numA < 12){
numA += 3;
}
System.out.print(numA);
numA numA < 12
4 true ⇒ numA increases by 3, loop continues
7 true ⇒ numA increases by 3, loop continues
10 true ⇒ numA increases by 3, loop continues
13 false ⇒ loop stops, program them prints out value of numA
Katie is writing a print statement but nothing is printing. Which of the following should she check for?
A.
Make sure the print statement is surrounded by parentheses.
B.
Make sure the word print is in all capital letters.
C.
Make sure there is a colon after the print statement.
D.
Make sure the next line after the print statement is indented.
Answer:
A.
Explanation:
Parenthesis are required to be around the data in a print function. All the letters in a print statement should be lowercase. A colon isn't required after a print statement. Indentation is not needed for a print statement because there are no colons after the statement instead. Here's an example where you would need to indent the line:
def randNum( x, y ):
x = input("Enter number: ")
y = input("Enter number: ")
return x * y
Here's an example of a print statement:
print("My name is Sullen.")
what will the computer do in response to a line of code reading # name = input("What is your name?") print “What is your name?” print “name =” nothing return a syntax error
The computer will do nothing in response to the instruction # name = input("What is your name?")
The instruction is given as:
# name = input("What is your name?")
The above instruction is a Python instruction.
In Python, lines that begin with # are not executed, because they are treated as comments.
This means that, the computer will not do anything when it comes across the instruction
Read more about Python instructions at:
https://brainly.com/question/19344465
What are two characteristics of switches? (Choose two.) * 1 point A. Switches identify the intended destination of the data that they receive B. Switches cause more data collisions than hubs b C. Switches are capable of sending and receiving data at the same time D. Switches send each packet to all of the computer that are connected to them.
Answer:
A. Switches identify the intended destination of the data that they receive. And C. Switches are capable of sending and receiving data at the same time
Explanation:
Switches can be used as inputs (Analog), or outputs (digital). These inputs and outputs are signals that the switches send or receive- Or at least as push button switches... But the same applies to network switches.
Hope this helps! Have a great day!
A facility that is pre-wired for necessary telecommunications and computer equipment, but doesn't have equipment installed, is known as a
Answer:
hot site
Explanation:
goal of any user-friendly game should be to create a good what for the player?
A.
user experience (UX)
B.
user-interface (UI)
C.
user intuition (UIT)
D.
user skill (US).
Middle school question edmentum please add pic or just give answer
Answer:
with me being a gamer i know for a fact i love getting a good experience but also using my own thoughts into the game to help make decisions. so for the sake of your question its gonna be C; UIT
Answer:
A
Explanation:
User Experience is what makes a use friendly game accessible and enjoyable
write a program to print even numbers from 1 to 20
Answer:
If qbasic then
pls mark barinist
Answer:
print(“2 4 6 8 10 12 14 16 18 20”)
Pomelo and Calamansi Trees are type of plants that suitable in this method.A. Cleft-Grafting B. Marcotting C. Layering D. T-Budding
You are creating a program that can add up the amount of money the user spent that day. Right down to the penny! What kind of variables should you create? a default variable a user variable an integer variable a float variable
Answer:A. A default Variable
Explanation:
Answer:
A
Explanation:
Did it on a Test
codes 7.2.8: Listed Greeting python
pls help i have no idea on how to fix this
The listed greetings program is an illustration of Python functions.
The error in the program is that the program is not properly indented.
Python program uses indents to identify blocks of code.
So, the fix to the program is to properly indent the code, and the fix (without the comments) is as follows:
def greetings(s):
x = s.split()
print("Hello, "+x[0]+"! I also enjoy "+x[1]+"!")
Read more about Python programs at:
https://brainly.com/question/16240699
create a parameter query where the user will enter a value to use as the criterion
Write true or false:-
1. The start attribute always accept an integer value.
2. Description list is used to create a bulleted list.
3. The <DT> tag is used to create a table in HTML.
4. The <TR> tag is used to create cells in the table.
5. The VALIGN in attitude of the <TD> tag is used to Align the position of text in the cell vertically.
And please don't give only one answer, if you are giving, then please give all the answers.
Answer:
false
true
false
true
false
Explanation:
.
Fill in the blank: Every database has its own formatting, which can cause the data to seem inconsistent. Data analysts use the _____ tool to create a clean and consistent visual appearance for their spreadsheets.
The tool used by data analysts to create a clean and consistent visual appearance for their spreadsheets is called clear formats.
A database refers to an organized or structured collection of data that is typically stored on a computer system and it can be accessed in various ways. Also, each database has a unique formatting and this may result in data inconsistency.
In Computer science, a clean data is essential in obtaining the following:
Data consistencyData integrityReliable solutions and decisions.Furthermore, spreadsheets are designed and developed with all kinds of tools that can be used to produce a clean data that are consistent and reliable for analysis.
In this context, clear formats is a kind of tool that is used by data analysts to create a clean and consistent visual appearance for their spreadsheets.
Read more on database here: https://brainly.com/question/15334693
Which of these problems is correct if the numbers are binary numbers?
Group of answer choices
1 + 1 = 2
1 + 1 = 10
0 + 0 = 1
1 + 0 = 10
Answer:
1 + 1 = 10
Explanation:
2 does not occur in the binary "alphabet"
0 + 0 = 0 in any base, so also in binary
1 + 0 = 1 in any base, so also in binary
Which type of wireless attack is designed to capture wireless transmissions coming from legitimate users
A type of wireless attack that is typically designed and developed to capture wireless transmissions coming from legitimate end users is referred to evil twin.
An evil twin can be defined as an illegitimate and fraudulent that is usually set up to capture wireless transmissions, especially by eavesdropping on the information transmitted by legitimate end users.
In Cybersecurity, an evil twin is an equivalent of phishing on a local area network (LAN).
Basically, an evil twin is a rogue wireless access point (AP) that is typically designed and developed to capture wireless transmissions and sensitive information coming from legitimate end users.
In conclusion, an evil twin is used by an attacker or hacker to gain an unauthorized access to sensitive information from legitimate end users.
Read more: https://brainly.com/question/5660386
________ is a function pertaining to a particular database that develops procedures and practices to control and protect the database.
Answer: Database administration
Explanation:
Understanding that protection of sensitive unclassified information is:
Answer:
Not necessarily malignant
Explanation:
As the word "unclassified" shows it's not damaging, however I still doesn't recommend if it's not necessary.
the service you are attempting to use is restricted
Services can be restricted due to different factors. If when an individual have received calls on their cell phone and the device's caller ID shows "Unavailable" or "Restricted," It can be due to a lot of factors.
Note that caller ID designations are brought about by the settings on the caller's end or network restrictions and not the phone's settings.
When a Cell phone calls designated shows "Unavailable" on a phone's caller ID, it means that the placed from an area or region is, is where the wireless service provider or phone company cannot be able to retrieve that phone number.
A "Restricted" phone call is said to be a call from a caller who has blocked one's phone so that you cannot identify their number.
Learn more about restricted from
https://brainly.com/question/15870692
Pls help me pls I’m struggling
Sidney needs to create a decimal number variable that will be added to another number. What kind of variable is required?binaryBooleanstringfloat
One of the best ways to code effective programs is to write so-called _______ programs, using the sequential, selection, or repetition logic structures.
One of the best ways to code effective programs is to write so-called structured programs, using the sequential, selection, or repetition logic structures.
Structured programs are program types that aim to improve the clarity of program codes to make them readable and reusable.
Structural codes such as the if/then/else for selection and while/for repetition are used to achieve these goals.
So, structured programs are used to write programs that follow the sequential, selection, and repetition logic structures.
Learn more about structured programs here:
https://brainly.com/question/25770844
Aliaa and Zhang Li are tennis-playing robots. Aliaa is 715\,\text{cm}715cm715, start text, c, m, end text from Zhang Li and 2{,}200\,\text{cm}2,200cm2, comma, 200, start text, c, m, end text from the far corner. Zhang Li measures an 91\degree91°91, degree angle between Aliaa and the far corner, as shown.
From Aliaa's viewpoint, what is the angle between Zhang Li and the far corner?
Do not round during your calculations. Round your final answer to the nearest degree.
Answer:
70
Explanation:
Law of Sines.
sin(91)/12 = sin(x)/715
x=19
180-91-19=70
imagery functions as a coding system to help individuals acquire movement patterns. this describes
Answer:
Imagery can be used to develop qualities in yourself you'd like to have — it's like emotional body-building — and using a technique called “Evocative Imagery” you can cultivate courage, patience, tolerance, humor, concentration, self-confidence or any other quality you'd like to embody.
A numeric test score is to be converted to a letter grade of A, B, or C according to the following rules: A score greater than 90 is considered an A; a score between 80 and 90, inclusive, is considered a B; and any other score is considered a C. What code segments will assign the correct letter grade to grade based on the value of the variable score?
The code segment makes use of conditional statements.
Conditional statements in programming are used to make decisions
The code segment in C++ is as follows
if (score > 90) {
grade = 'A';
}
else if (score >= 80 && score < =90) {
grade = 'B';
}
else {
grade = 'C';
}
The above code segments take the score, make comparison, and then determine the appropriate letter grade.
Read more about code segments at:
https://brainly.com/question/20475581
II and III
Explanation:If it is the test i think it is
I is incorrect because it is saying that automatically it is set as C but if the score is over 90 then you get an A if it's anything else then it's a B. This is false because then your outcome will never be C. It would only be A or B.
II is correct because it starts off by saying that if the score is greater than 90 then you'll get an A if else then if your score is equal to or greater or equal to than 80 then you get B and then if anything else then it's a C. This incoorporates everything.
III is also true because it start off by saying if anything is below an 80 then you automatically get a C. If it's anything over than 80 then if it's equal to or less than 90 then you get a b and if it's anything else then you get an A. This also checks out which means it's true.
So the answer is II and III
If your company uses a non-price competition strategy what should you focus on
A. lowering prices
B. differentiation
C. creating direct competitors
D. the public sector
B- differentiation
nonprice competition strategy refers to strategy to win a business competition that does not involved lowering price of the product.
Businesses mostly do this using differentiation strategy, which is increasing the different variety of product that they sell in the market.
Megan owns a small neighborhood coffee shop, and she has fifteen employees who work as baristas. All of the employees have the same hourly pay rate. Megan has asked you to design a program that will allow her to enter the number of hours worked by each employee and then display the amounts of all the employees’ gross pay. You determine that the program should perform the following steps:
1. The text that is in the file is stored as one sentence. Incorporate the code that reads the file’s contents and calculates the following:
a. total number of words in the file
b. total average number of words per sentence
c. total number of characters in the file
d. total average number of characters per sentence
file name: employee_names.txt
file text:
George Thomas
Melinda Harris
Norah Jeddery
Jorge Ortiz
Samantha Gregory
Tanvi Gupta
William Edwards
Tania Gomez
Erica Sanders
Gracie Lou Freebush
Tony Montana
Obi-Wan Kenobi
Cruella De Vil
Marty McFly
Napoleon Dynamite
Answer:
she gives 10 dollars an hour
Explanation:
no
define the term malicious program
What do you mean by Data Types? Give Examples.
Ms Access question
Answer:
This answer is quite late, but data types are basically categories that differentiate stuff in python.
A few examples would be:
String - Anything that has single or double-quotes around it. The input( ) function automatically returns a string, unless changed.
Int - An integer. Any whole number.
Float - Any decimal number.
List - a variable in which you can store multiple different elements. (Strings, integers, floats, tuples, lists, etc...)
Also, sorry if my English isn't perfect. English isn't my first language.
Explanation:
Don't know. Just some stuff I remember from my python class. ∞