Which of the answer choices is a form of nitrogen that can be utilized by plants?
Please choose the correct answer from the following choices, and then select the submit answer button.
NO3-
N2
NO2-
None of the other answer options is correct.
NH4+

Answers

Answer 1

NO3 is a form of nitrogen that can be utilized by plants.

What is an NO3?

The chemical formula for the polyatomic ion nitrate is NO3. The word "nitrates" refers to salts that include this ion. Many fertilizers and explosives have nitrates as a component. Water can dissolve almost all inorganic nitrates.

What is an nitrogen?

In Group 15 [Va] of the periodic table, nitrogen (N) is a nonmetallic element. The most prevalent element in the atmosphere of Earth is this colorless, flavorless, and odorless gas, which is also a component of all living things  nitrogen.

Therefore, NO3 is correct answer.

Learn more about NO3 from the given link.

https://brainly.com/question/26018608

#SPJ4


Related Questions

in terms of bonding, simply explain why silicate materials have relatively low densities. (0.5 points)

Answers

Due to the interatomic Si-O bonds' substantial covalent character and directionality, which restricts the efficiency of atom packing, silicate materials have relatively low densities.

By sharing electrons among nearby atoms, covalent bonds produce a stable electron configuration. At least one electron from each atom will be shared by two atoms that are covalently connected. A 3D structure is created. The bonds between atoms are very directional because electrons are shared between them. Because of this directionality, atomic packing is less dense and results in low density.

The second most plentiful element on earth, silicon, is a crucial component of the mineral world. Due to its solid tetrahedral structure, it is very adaptable and used in a variety of ways in our daily lives.

To know more about silicates, refer to the following link:

https://brainly.com/question/4938885

#SPJ4

for the reaction in which the equalibrium constant, k, is equal to 1.000, what would be the value of eo? two electrons are transferred in the reaction at a temperature of 298.15 k.

Answers

The value of Eo would be = 0

What is Nerst equation?

The Nernst equation formula connects the reaction quotient, electrochemical cell potential, temperature, and standard cell potential.

Eo = [tex](\frac{RT}{nF} ) lnK[/tex]

Where,

R = Gas constant

T = Temperature

K = equilibrium constant

F = Faraday constant

n = no. of electrons

Given,

k = 1.000

T = 298.15k

n = 2

R = Gas constant = 8.314[tex]JK^-^1mol^-^1[/tex]

We know,

Eo = [tex](\frac{RT}{nF} ) lnK[/tex]

Subsituting the values:

Eo = [tex](\frac{8.314 * 298.15}{2 * 96485} ) lnK[/tex]

Eo = [tex]\frac{0.592}{2} lnK[/tex]

Eo = 0.296 * ln (1)

Eo = 0.296 * 0

Eo = 0

The value of Eo would be = 0

To know more about Nerst law, check out:

https://brainly.com/question/15237843

#SPJ4

Under which of the following sets of conditions is a real gas expected to deviate from ideal behavior?
(I) High pressure, small volume.
(II) High temperature, low pressure.
(III) Low temperature, high pressure
A. Only I
B. Only II
C. Only III
D. I and III both
Answer: D

Answers

(I) High pressure, small volume.

(III) Low temperature, high pressure

sets of conditions is a real gas expected to deviate from ideal behavior

A theoretical gas called an ideal gas is one that has lots of point particles flying around arbitrarily and not being affected by other particles. The ideal gas notion is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. A theoretical gas called an ideal gas is one that has many of randomly moving particles but doesn't have any interparticle interactions. The converse is true for a real gas; it takes up space and its molecules interact. As a result, PV is always equal to nRT.

Learn more about real gas here:

https://brainly.com/question/12340746

#SPJ4

a sample of gas has a volume of 5.75 l at 425 mmhg. what is the new pressure if the volume is changed to 7.60 l while the temperature and amount of gas are held constant?

Answers

With the temperature and amount of gas remaining constant, the new pressure for a sample of gas with a volume of 5.75 l at 425 mmHg is 562 mmHg. We can use gas constant.

The force applied perpendicular to an object's surface per unit area across which that force is spread is known as pressure (symbol: p or P). The pressure relative to the surrounding air is known as gauge pressure, sometimes spelled gauge pressure. The sign R or R stands for the molar gas constant, also known as the gas constant, universal gas constant, or ideal gas constant. It is the Boltzmann constant's molar equivalent, measured in units of energy per degree of temperature increment and amount of substance. According to Boyle's rule, pressure and volume are inversely related at constant temperature and gas volume, hence P1V1 = P2V2 P2=P1V1 /V2 V1 = beginning gas volume = 5.75 L V2 = final gas volume = 7.60 L.

P1 = 425 mmHg initial gas pressure

If we plug the value P2= 425*7.60/5.75 = 561.7 mmHg, the answer is the fourth choice at 562 mmHg.

Learn more about gas constant here

https://brainly.com/question/24281105

#SPJ4

What key features should be present in the ir spectrum of your product if you successfully made the desired bromohydrin? what key features should be absent from the ir spectrum if the starting material was completely reacted?.

Answers

The key features that should be present in the IR spectrum of your product if you successfully made the desired bromohydrin and the key features that should be absent from the IR spectrum if the starting material was completely reacted are the spectra of the other alcohols.

The spectra of the other alcohols utilized in the synthesis indicate the presence of bromohydrin. The presence of Bromohydrin with the Hydroxyl stretch characteristic demonstrates the presence of alcohol

What is bromohydrin?

Bromonydrin is formed by the addition of Br and OH across an alkene, and the result is known as a bromohydrin (bromo=bromine, hydrin=hydro, water/H₂O).

The synthesis of bromohydrins includes extremely regioselective ring expansion of epoxides to halohydrins using hydrogen and lithium halides in the presence of -cyclodextrin in water as a solvent.

Learn more about bromohydrin:
https://brainly.com/question/19578942
#SPJ1

Joseph has found that when he passes a high voltage current through an evacuated tube, he can make a phosphor coating on one end of the tube glow. One day he makes the that if a metal shape is put in the middle of the tube, it casts a shadow on the phosphor coating.

Answers

The phosphor coating is shadowed when a metal form is placed in the center of the tube.

Who or what uses phosphor?

The majority of the light emitted by fluorescent lamps is created by phosphor layers, which are also used to balance the light from metal halide lamps. To create multiple light hues, neon signs employ phosphor layers.

Phosphorus may be found where?

The richest sources of phosphorus include dairy, red meat, poultry, shellfish, legumes, and nuts, while phosphorus is naturally present in a wide range of foods. It is referred to as organic phosphorus when it is present in certain meals. Foods from animals and plants both facilitate its absorption more effectively.

To know more about Phosphor visit:

https://brainly.com/question/16114528

#SPJ4

true or false. in a voltaic cell, the oxidation and reduction reactions occur in separate compartments. g

Answers

The release of energy from a spontaneous reaction can be put to good use. The reaction must be divided into the oxidation and reduction reactions, two independent half-reactions, in order to capture this energy. '

It only makes sense that electrons move from the electrode with a higher negative charge to the electrode with a higher positive charge since the anode and cathode are opposites of each other. The anode is one electrode where the oxidation half-reaction takes place, while the cathode is the electrode where the reduction half-reaction takes place.

Learn more about the half-reaction

https://brainly.com/question/8762149

#SPJ4,

5. determine the overall cell reaction and e°cell at 25°c of a galvanic cell made of a cd electrode in a 1.0 m cd(no3)2 solution and a pb electrode in a 1.0 m pb(no3)2 solution.

Answers

The overall cell reaction and e°cell at 25°c of a galvanic cell made of a cd electrode in a 1.0 m cd(no3)2 solution and a pb electrode in a 1.0 m pb(no3)2 solution. D.) Pb2+(aq) + Zn(s) > Pb(s) + Zn2+(aq), In order for the cell to be galvanic, the overall cell potential must be a positive value and it must have redox half-cell reactions. The oxidation/reduction half-cell reactions occur as follows. Zn  →  Zn2+  +  2e-                                 E0 = -(-0.76) V

 (We reversed this because it is an oxidation reaction (as Zn oxidised with ease when compared to Pb), and the other is

Pb2+  +  2 e-  →  Pb                                E0 = -0.13 V  (Reduction reaction).

A galvanic cell or voltaic cell is an electrochemical device that uses spontaneous redox reactions to transform chemical energy into electrical energy. Gadget cell The voltaic cell is an electrochemical device that uses chemical reactions to produce electricity. An electrochemical cell called a galvanic cell can generate electricity through a chemical reaction. In an electrolytic cell, a chemical reaction is propagated by an electric current. In this cell, chemical energy is transformed into electrical energy. Chemical energy is transformed from electrical energy by it. The anode of a galvanic cell will receive electrons as they enter. The anode is negatively charged because electrons are positively charged particles. The cathode operates similarly.

Learn more about glavanic cell here:

https://brainly.com/question/13031093

#SPJ4

a cylinder with a moveable piston contains 92g of nitrogen. the external pressure is constant at 1.00 atm. the initial temperature is 200k. when the temperature is increased by 92 k, by taking it out of the freezer, the volume will increase, according to the ideal gas law. calculate the work for this process. express your answer in j. the conversion factor between liter atmospheres and joules is 101.3 j

Answers

The work done is equal to 1911.53 J.

Solution:

work done =  18.87Latm

= 18.87 x 101.3j

= 1911.53 j

The work done is calculated by substituting the value of pressure, final volume, and initial volume in the work done equation. Then, the unit for work done will be in L atm, and this is converted into joules by multiplying the value in L atm with:

The work done is equal to 101.3j

= 1911.53j

Thus, The work done is equal to 1911.53 J.

The total cost of work in process refers to the sum of the starting cost of work in process and the total manufacturing cost for the period. In other words, the above concept can be obtained by adding the original work-in-progress inventory to the total manufacturing cost.

Learn more about The initial temperature here:- https://brainly.com/question/17174152

#SPJ4

In general, a lone pair repels bonding electron pairs _____ than bonding pairs repel each other. A lone pair will therefore _____ the bond angle between bonding pairs. A double bond has a similar effect because a double bond has a _____ electron density than a single bond.

Answers

In general, a lone pair repels bonding electron pairs more than bonding pairs repel each other. A lone pair will therefore decrease the bond angle between bonding pairs greater.

What makes a double bond?

When atoms share two pairs of electrons, this double bond is created. Pairs of electrons are constantly shared. A chemical bond is just a shared pair of electrons. A double connection between two atoms requires more energy for break than a single bond because 4 electrons are shared by the two or more atoms in the double bond.

What type of bond is a double bond?

A covalent link with bond order = 2 made up of four electrons, two of which form sigma and pi bonds, respectively. displaying single, doubled, and tripling bonds in the Lewis structure. a molecular representation of ethylene's dual bond.

To know more about Double bond visit:

https://brainly.com/question/11248057

#SPJ4

seawater with less than 35 ppt but more than 30 ppt is termed . a. brine. b. saline. c. brackish. d. metahaline.

Answers

Brackish water is a mixture of freshwater and seawater, below approximately 33 ppt.

Brackish water(aka brack water) is water occurring in a natural environment that has more salinity than freshwater  but not as much as seawater. It may result from mixing seawater (salt water) and freshwater together, as in estuaries, or it may occur in brackish fossil aquifers. The word comes from the Middle Dutch root brak, which means slightly salty.

What is Salinity ?                                                                                               Salinity is the measure of the number of grams of salts per kilogram of seawater, which is expressed in parts per thousand. Parts per thousand can be defined as how many parts, or grams, of salt there are per thousand parts, or kilogram (1,000 g), of seawater

Learn more about salinity here ;

brainly.com/question/3096437

#SPJ4

malate is converted to oxaloacetate by malate dehydrogenase using the cofactor nad .nad . note that histidine is the base needed to start the reaction, and it is abbreviated as :b.:b. only the relevant portion of nad nad is shown.

Answers

NAD+ + malate → NADH + oxaloacetate

The reaction is catalyzed by malate dehydrogenase, and is initiated by the binding of histidine (abbreviated as :b.:b.) to the enzyme. The reaction proceeds as follows:

:b.:b. + malate → :b.:b. malate

NAD+ + :b.:b. malate → NADH + oxaloacetate

What is Malate?

Malate is a type of organic acid found naturally in many plants, including apples and oranges. It is an intermediate metabolite in the citric acid cycle, a biochemical process by which energy is released from food molecules. Malate is also used as a food additive to enhance flavor and color and is often added to sports drinks and other beverages.

Define Histidine?

Histidine is an essential amino acid that is found in proteins. It is important for growth and repair of tissues, and it helps regulate the acid-base balance in the body. Histidine is also important for the production of both red and white blood cells, and it has roles in the nervous system, immune system, and digestive system.

To know more about Malate,

https://brainly.com/question/16360363

#SPJ4

what is the molarity of an hcl solution if it takes 25.00 ml of a 0.750 m naoh solution to neutralize 10.00 ml of the hcl solution?

Answers

1.875M is the molarity of an HCl solution if it takes 25.00 ml of a 0.750 m NaOH solution to neutralize 10.00 ml of the HCl solution

The Balanced reaction for the equation is given by:

HCl+NaOH⇌H₂O+NaCl

It is given that the molarity of NaOH is 0.750M, the volume of HCl is 25ml, the volume of HCl to be neutralized is 10ml.

Then, By titration:

We know that,

Molarity = n/V

n = Molarity x V

0.025 L of 0.750 mol/L of NaOH = No of moles of NaOH

No of moles NaOH = 0.025 x 0.750

No of moles of NaOH = 0.01875 mol

Then it can be written that,

0.01875 mol NaOH and 1 mol HCl/1 mol NaOH = 0.01875 mol HCl

Now,

0.01875 mol HCl / 0.010 L = 1.875M HCl

Therefore, the molarity is 1.875M

To know more about acid-base titration, click below:

https://brainly.com/question/23687757

#SPJ4

when you reach the temperature of the what point, you become a liquid?

Answers

Answer:

depends on what the substance is for example iron has a 2,800F melting point

Explanation:

as a result of electron flow through complex iii, four protons (h ) are moved into the intermembrane space

Answers

As a result of electron flow through complex iii the four protons (h ) are moved into the intermembrane space to cytochrome c i.e. another electron transporter.

What is Complex iii?

Electron flow through Complex iii is  a multi-subunit   type structure which is responsible for taking electrons from ubiquinol and transferring them to cytochrome c i.e. another electron transporter.

Electron flow:

The electrons flow from -ive(negative) terminal to +ive (positive) terminal causing current flow in the circuit and also known as electron current.

Hence, as a result of electron flow through complex iii the four protons (h ) are moved into the intermembrane space to cytochrome c i.e. another electron transporter.

to know more about electron flow visit

https://brainly.com/question/6841269

#SPJ4

nitrogen oxide can be generated on a laboratory scale by the reaction of dilute sulfuric acid with aqueous sodium nitrite: 6 nano2(aq) 1 3 h2so4(aq) 88n 4 no(g) 1 2 hno3(aq) 1 2 h2o(,) 1 3 na2so4(aq) what volume of 0.646 m aqueous nano2 should be used in this reaction to generate 5.00 l of nitrogen oxide at a temperature of 20°c and a pressure of 0.970 atm?

Answers

Number of moles is 0.202 mol.

The balanced equation for a reaction is represented as follows:

6 NaNO, (aq) +3 H₂SO₄, (aq) -> 4 NO(g)+2HNO, (aq)+2 H₂O (D)+3 Na SO, (aq) The number of moles of nitrogen oxide (NO) can be calculated using ideal gas equation which is represented as follows:

PV =NRT

Here,

P =pressure of a sample of gas

V = volume of a sample of gas

N = number of moles of gas present

T= absolute temperature

R =universal gas constant= 0.08206 L atm mol⁻¹ k⁻¹

The equation is solved for and then substituted with known values as follows:

no of moles := PV/RT = (0.970*5.00) / (0.08206 *293) =0.202 mol

To learn more about ideal gas equation:

brainly.com/question/28837405

#SPJ4

refer to the neutralization of nitric acid by sodium hydroxide discussed in the introduction. calculate the heat of reaction (in kj) when 44.4 ml of 1.3 m nitric acid reacts with 51.5 ml of 0.6 m sodium hydroxide.

Answers

The heat of reaction when 44.4 ml of 1.3M nitric acid reacts with 51.5 ml of 0.6M sodium hydroxide is 1.65 KJ/mol.

The neutralization reaction of HNO₃ and NaOH takes place according to the reaction as,

HNO₃+ NaOH → NaNO₃ + H₂O

So, as we can see, one mole of HNO₃ reats completely with one mole of NaOH.

The heat of reaction is the heat the heat released when one mole of HNO₃ completely reacts with one mole of NaOH. For one mole, the heat of reaction is 53.7 KJ/mol

Now, in this case 44.4 ml of 1.3M nitric acid reacts with 51.5 ml of 0.6M sodium hydroxide.

So, millimoles of HNO₃ are 57.59 millimoles.

Now, millimoles of NaOH are 30.9 millimoles.

So, because NaOH is limiting reagent, so,

The heat of the reaction will be,

Heat of reaction = 53.7 x 1000 x 30.9/1000

Heat of reaction = 1.65 KJ/mol.

So, the heat of the reaction is 1.65 KJ/mol.

To know more about Heat of reaction, visit,

https://brainly.com/question/7542422

#SPJ4

Determine the equilibrium constant at 255 K for the following reaction under acidic conditions 4H+(aq) + MnO, (s) +2Fe2+ (aq)-> Mn2+ (aq) +2Fe3+ (aq) + 2H,0? The two half-reactions are: MnO2(s) +4H+(aq) + 2e-? Mn2+(aq) + 2H20(1) E?-1.23 V Fe3-(aq) + e-? Fe2 + (ag) E -0.770 V

Answers

The equilibrium constant (K) for the reaction at 255K is given by the Nernst equation.

What is equilibrium constant?
The value of a chemical reaction's reaction ratio at chemical equilibrium, a government that a dynamic chemical system approaches after enough time has passed and at which its structure has no discernible tendency to change further, is the equilibrium constant for that reaction. The equilibrium constant seems to be dependent on the initial analysis concentration levels of the product and reactant species in the mixture for a particular set of reaction conditions. As a result, the composition of a system at equilibrium can be calculated from its initial composition using known equilibrium constant values. However, factors affecting the reaction such as temperature, solvent, as well as ionic strength may all affect the equilibrium constant's value.

The equilibrium constant (K) for the reaction at 255K is given by the Nernst equation:
K = e^(-ΔG/RT)
where ΔG is the standard Gibbs free energy of reaction and R is the gas constant.

Using the half-reactions, we can calculate the standard Gibbs free energy of reaction (ΔG) as follows:
ΔG = -nF(E1-E2)
where n is the number of moles of electrons transferred in the reaction and F is the Faraday constant.
For the reaction above, n=2 and F=96,485 C/mol. Therefore,
ΔG = -2*96,485*(1.23-0.77) = -189.4 kJ/mol
Therefore, the equilibrium constant (K) at 255K is given by:
K = e^(-189.4/8.314*255) = 2.13 x 10^-11

To learn more about equilibrium constant

https://brainly.com/question/19340344
#SPJ4

18.0 g of nitrogen gas occupies 19.0 l at a particular temperature and pressure. 67.0 g of unknown gas occupies the same volume at the same pressure and temperature. what is the molar mass of the unknown gas?

Answers

Molar mass of unknown gas is 52 g/mol and Unknown gas is chromium

Given in the question;

Mass of nitrogen = 18 g

So, No of Moles of nitrogen (n')  = 18/14 = 1.28 mol

Volume of nitrogen (V') = Volume of unknown gas (V") = 19 L

Let number of mol of unknown solution be X(n")

Applying Ideal gas law PV = nRT (mention in question that pressure and temperature of both gas is same R is already constant)

So, V'/n' = V"/n"

Thus, 19/1.28 = 19/n"

n" = 1.28 mol

So, No of mols of unknown gas is 1.28 mol.

Molar mass of Unknown gas = Given mass/number of mols

                                                = 67/1.28 = 52 g/mol

So, Molar mass of unknown gas is 52 g/mol and Unknown gas is chromium

To learn more about Ideal gas law visit here ; https://brainly.com/question/28257995?referrer=searchResults

#SPJ4

the osmotic pressure, π , of a solution of glucose is 88.0 atm . find the molarity of the solution at 298 k .

Answers

The osmotic pressure, π , of a solution of glucose is 88.0 atm . the molarity of the solution at 298 K  is 3.60 mol/ L

given that :

osmotic pressure of glucose = 88.0 atm

temperature = 298 K

the expression for the osmotic pressure is as follows :

π = i M R T

where ,

i = van't hoff's factor = 1

R = constant = 0.082 L atm / mol K

T = temperature = 298 K

π = osmotic pressure = 88.0 atm

M = molarity = ?

M = π / i RT

M = 88 / ( 1 × 0.082 × 298 )

M = 88 / 24.43

M = 3.60 mol /L

Thus, the molarity of solution is 3.60 mol/L

To learn more about osmotic pressure here

https://brainly.com/question/10847614

#SPJ4

A chunk of dry ice, solid co2, disappears after sitting at room temperature for a while. There is no puddle of liquid. What happened?.

Answers

Answer:

When dry ice (solid carbon dioxide) is exposed to room temperature, it sublimates, meaning it changes directly from a solid to a gas. This process is known as sublimation and is why dry ice "disappears" when left at room temperature. The gas produced is carbon dioxide, which is odorless and colorless.

a 2.25-g sample of magnesium nitrate, mg(no3)2, contains mol of this compound. question 20 options: 0.0152 65.8 38.4 148.3 0.0261

Answers

a 2.25 g sample of magnesium nitrate contains 0.0152 mol of this compound.

Calculation

The given amount of sample is 2.25 g.

The given sample is Mg(NO3)2.

The molar mass of Mg(NO3)2 is the sum of the atomic mass of each atom present in Mg(NO3)2.

The molar mass of Mg(NO3)2 is 148.3 g/mol.

The mole of Mg(NO3)2 is determined as follows:

Mole= Mass/Molar mass

On substituting known values;

Mole= 2.25g/148.3g/mol

Mole=0.0152mol

So, the mole magnesium nitrate is 0.0152.

Learn more about molar mass here:

https://brainly.com/question/12127540

#SPJ4

for the electron in the hydrogen atom, which of the sets of observables below are compatible observables?

Answers

For the electron in the hydrogen atom, the sets of observable below are compatible observable is-

The total energy, the magnitude of the orbital angular momentum and its component along the z-axis.

What is the charge of an electron in hydrogen atom?

A hydrogen atom has one positively charged proton and one negatively charged electron, making it overall neutral. The hydrogen ion has an electric charge of one when it loses that one electron to become an ion.

In hydrogen gas, each hydrogen molecule is made up of two hydrogen atoms that are bound together. Similarly, two oxygen atoms combine to form an oxygen molecule.

To know more about hydrogen atom refer to:

https://brainly.com/question/13796082

#SPJ4

Do you think it would be useful to determine the chemical properties of any of the evidence? why or why not? (at least one sentence).

Answers

Chemical categories may be created using Chemical properties . They can be helpful in identifying unknown chemicals as well as in separating or purifying them from other substances.

Any characteristic of a substance that can only be formed by altering its chemical identity is referred to as a Chemical properties . Chemical properties include those that emerge during or after a chemical reaction. Simply put, it is impossible to detect a substance's chemical qualities by looking at it or feeling it; instead, the internal structure of the substance must be significantly altered in order to conduct an investigation into its chemical properties. Chemical change happens when a substance undergoes a chemical reaction, which causes significant changes in its properties. An additional chemical feature would be one that is catalytic, though.

Physical qualities, on the other hand, can be identified without altering the structure of a substance, in contrast to chemical attributes

Learn more about Chemical properties here:

https://brainly.com/question/1935242

#SPJ4

which best explains the following trend? element b.p. (k) he 4 ne 25 ar 95 kr 125 xe 170 a. intramolecular forces b. dipole-dipole interaction c. hydrogen bonding d. le chatelier's principle e. none of these

Answers

London force best explains the following trend - element b.p. (k) He 4 Ne 25 Ar 95 Kr 125 Xe 170.

The least powerful intermolecular force is the London dispersion force. When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the consequence is the London dispersion force, a transient attractive force. The term "induced dipole-induced dipole attraction" is frequently used to describe this effect. When the temperature is sufficiently dropped, London forces—attractive forces—cause nonpolar substances to condense into liquids and to freeze into solids.

When an atom or molecule's electrons are dispersed asymmetrically around the nucleus, an instantaneous (temporary) dipole can form due to the electrons' continual mobility.

Thus London force best explains the following trend- element b.p. (k) he 4 Ne 25 Ar 95 Kr 125 Xe 170.

To learn more about London dispersion Force refer- https://brainly.com/question/1455074

#SPJ4

A naturally occurring sample of an element contains only two isotopes. The first isotope has a mass of 68.9255 amu and a natural abundance of 60.11%. The second isotope has a mass of 70.9247 amu. Use this information to answer the following questions. Calculate the atomic mass of the element, to 4 significant figures. Include the unit, amu, in your answer below. Give the full name for the element that exists as these two isotopes. Explain how you determined the element name in the above question.

Answers

The atomic mass of the element, to 4 significant figures is  69.72 amu and the element is Gallium.

A mass for an atom is called its atomic mass. The unified atomic mass unit, which is not a SI unit but rather a non-SI counterpart of the dalton, is a common way to represent atomic mass, even though the kilogram is the SI unit of mass. A carbon-12 atom that is unbound and in its ground state has a mass of 112 of a gramme (Da). The single atom of a chemical element has a mass known as the atomic mass. Protons, neutrons, and electrons, three subatomic atomic particles with atomic masses, are involved.

With the chemical symbol Ga and atomic number 31, gallium is one of the elements. Gallium, a member of the periodic table's group 13 and a metal, was first discovered by the French chemist Paul-Émile Lecoq de Boisbaudran in 1875.

abundance of second isotope = (100 - 60.11) = 39.89 %

atomic mass of element = 68.9255 * (60.11 / 100) + 70.9247 * (39.89 / 100)

                                         = 69.72 amu (answer)

since the atomic mass of the element, 69.72 amu, matches that of gallium.

so, name of the element is Gallium and symbol is Ga

learn more about atomic mass here

https://brainly.com/question/5566317

#SPJ4

Classify each substance as a strong electrolyte, weak electrolyte, or nonelectrolyte:(a) Sodium permanganate (b) Acetic acid (c) Methanol (d) Calcium acetate

Answers

Sodium permanganate and Calcium acetate are strong electrolyte, Acetic acid  is weak electrolyte and Methanol is nonelectrolyte.

With the chemical formula NaMnO4, sodium permanganate is an inorganic substance. Most commonly, it comes in monohydrate form. Iron and manganese are removed, taste and odour are controlled, biological growth in treatment plants is controlled, and sodium permanganate is employed as an oxidant. By oxidising precursors and decreasing the need for other disinfectants, including chlorine, it can aid in lowering the development of disinfection byproducts (DBPs).

The chemical name for acetic acid, officially known as ethanoic acid, is CH3COOH. It is an organic substance that is acidic, colourless, and liquid. Its chemical formula is CH3COOH, and other names for acetic acid include ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid. Vinegar gets its distinctive smell from acetic acid, a byproduct of fermentation. A 4-6% acetic acid solution makes up vinegar.

learn more about sodium permanganate here

https://brainly.com/question/27802416

#SPJ4

Below are six boundary - surface representations of molecular orbitals in homonuclear (second period) diatomic molecules. Which of the following represents a pi-bonding molecular orbitals? Select all that apply.

Answers

The statement was not given completely hence it is not possible to give correct answer for surface representations of molecular orbitals in homonuclear (second period) diatomic molecules and which of the following represents a pi-bonding molecular orbitals.

What is pi-bonding?

The term "pi bond" refers to a type of covalent chemical interaction in which two orbital lobes on one atom overlap laterally with two orbital lobes on another atom.

Homonuclear diatomic molecules:

Homonuclear molecules are those made up of only one type of element and when we talk of Homonuclear diatomic molecules then these Homonuclear molecules are composed with two molecules of same element.

Some example of Homonuclear diatomic molecules are  :

hydrogen (H2)oxygen (O2)nitrogen (N2) all of the halogens

To know more about pi-bonding visit

https://brainly.com/question/28986537

#SPJ4

All of the following species contain N-O bond(s): NO-, NO2-, NO3-
Draw the Lewis structure(s) for each, then answer the following questions
Which has the strongest N-O bond? --
A. NO⁻
B. NO₂⁻
C. NO₃⁻
Which has the longest N-O bond? --
A.NO⁻
B.NO₂⁻
C. NO₃⁻

Answers

Lewis structure of NO⁻, NO₂⁻ and NO₃⁻ are attached to this answere below.

The higher the bond order, the stronger the bond and thus the shorter the bond.

The bond order for NO⁻ is  [tex]\frac{3 electrons}{1 bonding.group}[/tex] = 3/1 = 3

The bond order for  NO₂⁻ is [tex]\frac{3 electrons}{2 bonding.group}[/tex] = 3/2 = 1.5

The bond order for NO₃⁻ is [tex]\frac{4 electrons}{3 bonding.group}[/tex] = 4/3 = 1.33

Here, you can see the bond order decreases as the number of oxygens in these compounds increases and we know higher the bond order, the stronger the bond and thus the shorter the bond.

So, NO₃⁻ has lowest bond order that means it has longest and weak bond After NO₃⁻, NO₂⁻ comes and it has stronger bond than  NO₃⁻ and shorter Bond length than  NO₃⁻. NO⁻ has shortest and strongest bond among all three.

To learn more about Lewis structure visit here ; https://brainly.com/question/20300458?referrer=searchResults

#SPJ4

Partial bonding, for example, as part of a resonance hybrid, often results in structures with _____.

Answers

Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.

What is resonance hybrid?

Resonance structures are a collection of two or more Lewis structures that together represent the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges.

When a single Lewis formula with an integral number of covalent bonds is used, resonance structures can describe delocalized electrons that cannot be described by that formula.

Are there any partial charges in resonance hybrids?

There must never be any net formal charge in a resonance structure. The net partial charge on an atom, on the other hand, is the weighted average of the formal plus partial charges on that atom in each resonance contributor. Individual atoms, however, may have partial formal charges.

Know more about resonance hybrid at:

https://brainly.com/question/17211567

#SPJ4

Other Questions
The evidence I have collected supports my claim because Frank is a 70-year-old male with cirrhosis of the liver and a history of alcoholism. Frankpresents with the following symptoms: Difficulty seeing well at night or in low light Dry and inflamed eyes Foamy, gray spots on his eyesDry and rough skinFrank likely has a deficiency in? a community health nurse is assigned to work in a different area of the city. which assessment techniques could be used to develop an overview of the community? select all that apply. Members of a lacrosse team raised $1581. 75 to go to a tournament. They rented a bus for $968. 50 and budgeted $55. 75 per player for meals. Write and solve an equation which can be used to determine pp, the number of players the team can bring to the tournament. what is the probability that headway is within 1 standard deviation of the mean value? (round your answer to three decimal places.) Under the Articles of Confederation..a)Group of answer choices individual states had responsibility and written authority to make military treaties with other countries.b)all individual state money was to be destroyed effective 1 January 1781 and only silver dollars were to be used.c) the U.S. national government assumed all the power that the British parliament had to impose taxes.d) the U.S. national government could only ask states for money. PLSSSS HELPPPP IM TIMEDDDD PLSSS Select the correct answer.Which of these would not make for a good classroom that is ready for effective learning? A. quiet and distraction-free room B. crowded desks and tables C. organized bookshelves D. resources that are easily accessible choose either simone de beauvoir or charlotte perkins gilman and describe her view of what needs to occur in order for women to have justice in society. what role does economics play in questions of justice? Which part does NOT belong to the exterior of a car? A. puerta B. luz delantera C. luz indicadora D. tablero de mandos E. ruedas Katie company issues $14 million in bonds. The bonds are well received by investors solely based on the excellent reputation and past performance of the company, its products, and its executives. Katie most likely is issuing a(n) _______ bond.unsecuredsecured Students analyze the geographic, political, economic, religious, and social structures during the development of Rome.Identify the location and describe the rise of the Roman Republic, including the importance of such mythical and historical figures as Aeneas, Romulus and Remus, Cincinnatus, Julius Caesar, and Cicero. bichon company purchased equipment for $6,720 on december 1. it is estimated that annual depreciation on the equipment will be $1,680. if financial statements are to be prepared on december 31, the company should make the following adjusting entry: this chapter considers a downhill race between a rolling sphere, a rolling cylinder, a rolling hoop, and a sliding particle. who wins? 4. A room is 10 ft by 12 ft. How many square yards are in the room?The area of the room is 120 ft (area = length x width). I need help making a closing for my Gobi Desert. what is arbitrage? why does the internal revenue service place strict limits on the amount of arbitrage that a municipality can earn If you knowingly make a false statement in an application for a driver license or identification card, can you be fined and placed in prison upon conviction? 5/90 determine the reactions at a for the cantilever beam subjected to the distributed and concentrated loads. Pentagon PQRST is a scale drawing of pentagon ABCDE. the experiment of selective breeding of fruit flies for distinct differences in negative or positive geotaxis is an example of