Which of the alkyne addition reactions below involve(s) an enol intermediate?
1) halogenation.
2) hydrogen in the presence of a metal catalyst.
3) hydroboration/oxidation.
4) none of the above.

Answer:

[tex]m=173.58g[/tex]

Explanation:

Hello,

In this case, since the density is the ratio of the mass and volume:

[tex]\rho =\frac{m}{V}[/tex]

For the given density and volume, the correct mass which fills the given volume is:

[tex]m=\rho *V=0.789g/mL*220mL\\\\m=173.58g[/tex]

Best regards.

Answer:

Freezing T° of solution =  - 7.35 °C

Explanation:

This is about the freezing point depression, a colligative property which depends on solute.

The formula is: Freezing T° pure solvent - Freezing T° solution = m . Kf . i

Freezing T° of pure solvent is -3.1°C

At this case, i = 1. As an organic compound the urea does not ionize.

We determine the molality (mol/kg of solvent)

We convert mass to moles:

12.3 g . 1mol / 60.06 g = 0.205 moles

0.205 mol / 0.3 kg = 0.682 mol/kg

We replace data in the formula:

-3.1°C - Freezing T° of solution  = 0.682 mol/kg . 6.23 kg°C/mol . 1

Freezing T° of solution = 0.682 mol/kg . 6.23 kg°C/mol . 1 + 3.1°C

Freezing T° of solution =  - 7.35 °C

Answer:

C=O

Explanation:

The nuclear magnetic resonance (NMR) spectroscopy is a method that employs the technique to observe the local magnetic fields are atoms. This analytical technique exploits sufficient differences in the frequency of nuclear magnetic resonance in protons and atoms within organic compounds that depend on their neighboring atoms.

Amongst all the given options, the carbonyl is the right option because the carbon is doubly bonded to the oxygen and the hybridization of this double bond is sp² hybridized, as a result, the electron density at the carbon possess a lower amount in order to have more magnetic field.

The increasing order of these chemical shifts are as follows:

C - X     <     [tex]\mathbf{C -O }[/tex]≅[tex]\mathbf{ \mathrm{-C\equiv C-}}}[/tex]   < -C≡N    < C=O

It would be volume.

Volume is not an intensive property because it does change as the amount of substance increases or decreases. The rest of the properties are constant no matter the amount of substance.

Answer:

Volume

Look at the guy above me, okay-- they're smarter then me-

Explanation:

Sometimes, a solution contains more dissolved solute than is normally possible. This type of solution is said to be supersaturated. A saturated solution can become supersaturated if more solute is added while the temperature is raised.

hope it will help u ✌️

Answer:

An atomic nucleus is positively charged because it is composed of protons.

Explanation:

hope this helps you:)

Answer:

An atomic nucleus is positively charged because it is composed of protons.

Explanation: Just took test on edgenuity

Answer:

A) It limits the nuclear spin to certain allowed spin states.

Explanation:

A nucleus with an odd atomic number or an odd mass number has a nuclear spin, which can be observed through NMR.

A proton is the simplest nucleus, and its odd atomic number of 1 implies that it has one spin. We can visualize a spinning proton as a positively charged rotating sphere. This movement of a  charged particle is like an electric current in a wired loop. It generates a magnetic field called the magnetic moment. When a small magnetic bar is placed in the field of a larger magnet, it rotates to align itself with the field of the larger magnet, a lower energy arrangement than an orientation against the field. Quantum mechanics requires that the proton's magnetic moment is aligned with the external field or against the field. The lowest energy state with the proton aligned with the field is called the spin alpha state (α spin).  The higher energy state with the proton aligned against the external magnetic field is called the beta spin state (β spin).

In the absence of an external magnetic field, the magnetic moments of the protons have random orientations. When an external magnetic field is applied, each proton in a sample it assumes β state or α state. Because the state of spin α is lower in energy, there are more α spins than β spins.

mendeleev arranged the elements in order of increasing relative atomic mass. When he did this he noted that the chemical properties of the elements and their compounds showed a periodic trend

Answer:

Left to right

Elements are arranged by increasing atomic mass

Answer:

like mud

Explanation:

Answer:

wetland

Explanation:

a wetland is a region where water body meets land area

Answer:

option B is the right answer

"Is the Moon's gravitational force affecting the tides on Earth?"

Answer:

See explanation and image attached

Explanation:

When an alkene is reacted with cold, dilute and alkaline KMnO4, the product of the reaction is a 1,2-diol (vicinal diol). The products exhibit a “syn” stereochemistry with the addition of the two -OH groups to the same side of the alkene.

The reaction of cyclopentene with cold, dilute, alkaline KMnO4 is shown in the image attached.

In the given query, when cyclopentene is reacted with cold alkaline [tex]\rm KMnO_4[/tex], the product formed is cis-1,2-cyclopentanedicarboxylic acid (image attached below).

The reaction proceeds via oxidative cleavage of the double bond in cyclopentene to form two carboxylic acid groups.

The potassium permanganate ([tex]\rm KMnO_4[/tex]) acts as a strong oxidizing agent and cleaves the double bond to form two carboxylic acid groups.

The reaction can be represented as follows:

Cyclopentene + cold alkaline [tex]\rm KMnO_4 \rightarrow[/tex] cis-1,2-cyclopentanedicarboxylic acid

Therefore, the product, cis-1,2-cyclopentanedicarboxylic acid (refer to the attached image below), has a cyclopentane ring with two carboxylic acid groups attached to the 1 and 2 carbons, respectively.

Learn more about reaction here:

https://brainly.com/question/28546817

#SPJ3

Answer:

The gravity pulled the bits back and formed a ball which is the moon

Explanation:

hope this helps :)

Answer:

While some of the debris from the collision merged back into Earth, the gravity caused the accretion of much of the debris into a separate ball, forming the Moon.

Explanation:

Answer:

It's c

Explanation:

I'm taking the test now on edge.

It must be a different kind of atom statement mostly likely describes plutonium. Hence option C is correct.

It is the smallest unit of matter that possess the properties of the chemical element. It can’t be an independently, they form ions and molecules they both are combine and form large numbers of matters.

Atoms are basically three types: Neutrons, protons and electrons.

In periodic table plutonium is above uranium. Plutonium is more powerful as compared to uranium because it is an isotope and more radioactive.

Almost all of naturally occurring. Uranium 92U238with a half-life of 4.468 x 109 year. Most rest of the natural uranium is92U235.

Uranium is generally used in the process of nuclear fission whereas plutonium is used for the production of nuclear weapons.

It must be a different kind of atom statement mostly likely describes plutonium. Hence option C is correct.

Learn more about atoms, here:

https://brainly.com/question/1566330

#SPJ6

Answer:

dez nuts. the forth quauter in ur girls buttr

Gas is well separated with no regular arrangement, liquids are close together and solids are tightly packed. Solid, liquid, and Gas are the state of substances at room temperature.

There are three state of substances:

The chair you are sitting on is a solid, the water you drink is liquid, and the air you breathe is a gas. The atoms and molecules don't change, but the way they move about does. Water, for example, is always made up of two hydrogen atoms and one oxygen atom.

Physical properties of a particular substance determine its state at room temperature. If both its normal melting point and its normal boiling point are below room temperature (20°C), the substance is a gas under normal conditions.

Oxygen is a gas at room temperature. If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.

If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.

Therefore, solid, liquid and gas all exist as substances at room temperature.

To know more about state of substance, refer to below link:

https://brainly.com/question/7905041

#SPJ2

Answer:

B. 2

Explanation:

We see from the reaction side of the equation that we have 2 Li. That means we need the same number of Li on the products side. Therefore, our only option is 2.

Answer:

b

Explanation:

Answer:

Hello attached below is the missing ion diagram

Explanation:

Attached below is an important resonance form that shows the delocalization of charge in the ion shown

Answer:

72.04g Ti and 7.75g Na

Explanation:

1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti

0.337 mol Na x (22.99g/1 mol) = 7.75g Na

72.04g Ti and 7.75g Na mass in grams of these samples.

Molecular mass can be determined by the measure of mass related to a molecule which is otherwise called as atomic weight, means the mass of every atom present in the molecule.

For example, water have 2 hydrogen atoms and 1 oxygen atom, the molecular mass of water is equals to  the normal atomic mass of hydrogen increased by two or more the atomic mass of oxygen.

molecular mass can be controlled by many factors like Mass Spectrometry which is used to decide the mass of little molecule which is otherwise called as monoisotopic mass.

It can also be controlled by Hydrodynamic Strategy requires calibration and  determine the relative atomic weight; Static Light Scattering where the  Molecular weight is determined from the measure of light dispersed utilizing the Zimm technique.

So, 1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti

0.337 mol Na x (22.99g/1 mol) = 7.75g Na, hence the answer is 72.04g Ti and 7.75g Na

Learn more about mass, here:

https://brainly.com/question/18446366

#SPJ2

A substance that cannot be converted into another substance is known as an element. Each type of atom that makes up an element is unique. The correct option is A.

A substance whose atoms all contain the same number of protons is said to constitute an element; alternatively, all the atoms of a certain element must contain the same number of protons. Chemical reactions cannot degrade elements since they are the simplest chemical forms.

A compound is created when two or more components join chemically in a predetermined mass ratio.

Thus the correct option is A.

To know more about elements, visit;

https://brainly.com/question/29545466

#SPJ6

Answer:

A. Using materials and design techniques that reduce the negative

environmental impact of a structure

Explanation:

A P E X

Using materials and design techniques that reduce the negative

environmental impact of a structure. Hence, option A is correct.

Green design is the 'creation of buildings which are energy-efficient healthy, comfortable, flexible in use and designed for long life.

The word ‘Green’ represents designs which are eco-friendly and less harmful to humans and other organisms. It helps in the protection of natural resources such as water, air etc.

Green designs are also referred to as techniques and materials that reduce the negative environmental impact of a structure.

Hence, option A is correct.

Learn more about green design here:

https://brainly.com/question/27560699

#SPJ2

a. acceleration

----------------------

Answer:

Explanation:

An acid is a substance that, when dissolved in water produces hydrogen ions, H⁺ as the only positive ion. e.g.

HCl       ↔    H⁺   +   Cl⁻

HNO₃    ↔   H⁺   +  NO⁻₃

This process is known as ionization. The characteristics properties of an acid in solution are due to the presence of these hydrogen ions. In these reactions, the negative ions formed or sometimes the neutral compounds are usually known as the conjugate base of such acid.

From the given information, the conjugate base of the acid given can be seen in the attached image below.

The conjugate base for the acid is attached below.

An acid is a substance that, when dissolved in water produces hydrogen ions, H⁺ as the only positive ion. e.g.

HCl       ↔    H⁺   +   Cl⁻

HNO₃    ↔   H⁺   +  NO⁻₃

This process is known as ionization. The characteristics properties of an acid in solution are due to the presence of these hydrogen ions. In these reactions, the negative ions formed or sometimes the neutral compounds are usually known as the conjugate base of such acid.

The conjugate base of the acid given can be seen in the attached image below.

Find more information about Conjugate acid here:

brainly.com/question/22514615

Answer:

By taking the volume of the container.

Answer:

By taking the volume of the container

Explanation:

it does not have any specific volume or shape, so the way it volume is the volume of container.

PPPPLLLLEEEZZZZZ GIVE ME BRAINLIEST!!!!

Answer:

(a) 3.33 mol Bi

(b) 140. g CO

Explanation:

Step 1: Convert 775g to moles

Bi Molar Mass - 208.98 g/mol × 2 = 417.98 g/mol

O Molar Mass - 16.00 g/mol × 3 = 48.00 g/mol

775g Bi₂O₃ ÷ 465.98 g/mol = 1.66316 mol Bi₂O₃

Step 2: Find the conversion from Bi₂O₃ to Bi

1 mole of Bi₂O₃ equals 2 moles of Bi

Step 3: Use Dimensional Analysis

1.66316 mol  ·  [tex]\frac{2 \hspace{2} mol \hspace{2} Bi}{1 \hspace{2} mol \hspace{2} Bi_2O_3}[/tex] = 3.32632 mol Bi

3.32632 mol Bi ≈ 3.33 mol Bi (3 significant figures)

Step 4: Find the conversion from Bi₂O₃ to CO

1 mole of Bi₂O₃ equals 3 moles of CO

Step 5: Use Dimensional Analysis

1.66316 mol  · [tex]\frac{3 \hspace{2} mol \hspace{2} CO}{1 \hspace{2} mol \hspace{2} Bi_2O_3}[/tex] = 4.98948 mol CO

Step 6: Find molar mass of CO and convert moles to grams

C - 12.01 g/mol

O - 16.00 g/mol

4.98948 mol CO · 28.01 g/mol = 139.775 g CO

139.775 g CO ≈ 140. g CO (3 significant figures)

Answer:

yes, they were

Explanation:

The history of the metric system began in the Age of Enlightenment with notions of length and weighttaken from natural ones, and decimal multiples and fractions of them. The system became the standard of France and Europe in half a century. Other dimensions with unity ratios[Note 1] were added, and it went on to be adopted by the world.

Answer: kindly check explanation

Explanation:

Given the following :

Measured density of copper block:

8.6+/-0.2 g/cm3

True density = 8.96g/cm3

Standard deviation = 0.4g/cm

a. What is the high and low number of the confidence interval range?

High : 8.6 + 0.2 g/cm3 = 8.8g/cm³

Low : 8.6 - 0.2 g/cm3 = 8.4g/cm³

Does the true value fall within the confidence interval? NO

Actual density = 8.96g/cm³ doses not lie in between (8.4 - 8.8)g/cm³

B.) High and low of the standard deviation range?

High = 8.6 + 0.4 = 9.0g/cm³

Low = 8.6 - 0.4 = 8.2g/cm³

Value falls within range of the true density value of copper block.

8.96g/cm³ falls in-between (8.2-9.0)g/cm³

Answer: Because Alkalis are bases that can dissolve in water, which can also neutralize acid.