Answer:
A
Explanation:
I just did it :)
Answer:
It is A
Explanation:
I did it and got a 100
What type of bond is shown in the figure?
Answer:
ionic
Explanation:
Mr. Mehta cut several 275-centimeter lengths of wallpaper to put in his
dining room. How many meters long was each piece of wallpaper?
Answer:
2.75 meters.
Explanation:
1 meter = 100 centimeters.
There are 275 centimeters.
275/100=2.75
So, each piece of wallpaper was 2.75 meters long.
Answer:
Think
Explanation:
If a racer maintained a constant speed, during which sections of the race would the racer's velocity be the same?
Sections 1 and 2
Sections 2 and 3
Sections 2 and 4
Sections 3 and 4
pls help!!
Answer:
Sections 3 and 4
Explanation:
The correct answer would be sections 3 and 4.
The velocity of an object is the speed of the object in a particular direction. In this case, the speed of the racer is constant irrespective of the distance or the direction. Hence, the sections of the race during which the racer's velocity would be the same would be the sections in which the racer faces the same direction - which is sections 3 and 4.
Biomes on Earth have exhibited changes throughout history that have been caused by a variety of factors. Over the past 50 years, the amount of tropical rainforest acreage found throughout the world has decreased from 14.8 billion acres to 8.6 billion acres due to deforestation. What factor is likely most responsible for the changes observed in the world's rainforests? a. volcanic activity b. human activity c. temperature changes d. solar eclipses Please select the best answer from the choices provided A B C D
Answer:
b
Explanation:
The factor that is most likely to be responsible for the changes observed in the world's rainforest is human activities.
There has been a surge in the human population leading to an increased need for housing, foods, and other infrastructures. All these needs are directly or indirectly provided by the forest. Hence, the more the population of human expands, the more pressure that would be exerted on the rainforest and, indeed, other forests of the world.
The correct option is b.
What do zooplankton and krill have in common?
Krill and plankton are two groups of organisms found in the ocean. Krill are species of crustacean related to shrimp, and serve as a very important link in the food chain of the sea. Plankton consist of a larger group of organisms with much more variety, including bacteria, algae, protozoans, jellyfish and some species of cephalopods.
Propulsion
The primary factor that determines whether a species is plankton or not is propulsion. Plankton organisms lack the ability to swim against the tide, and instead float from place to place on sea currents. They may be capable of some movement, and some types of plankton can even hunt for food, but none is powerful enough to make its own headway through the ocean. Adult krill are capable of swimming against currents, but their larvae and eggs fall into the plankton category.
Variation
Krill are crustaceans of the Euphausiacea order, which consists of 86 different species. Plankton, on the other hand, can come from a wide variety of different species and orders. Plankton fall into three broad categories, depending on their primary function. Phytoplankton are plant-like organisms, capable of photosynthesis. Zooplankton are animal plankton species that get their nutrients by eating other microscopic organisms. Bacterioplankton are the smallest plankton, and often serve as food for zooplankton and other lifeforms.
Appearance
Krill species have similar characteristics and generally resemble tiny shrimp. Most species reach around 2 centimeters (0.8 inches) as adults, while the largest species can reach sizes of up to 15 centimeters (5.9 inches). Plankton, on the other hand, consists of organisms of many different shapes and sizes. The smallest categories include microscopic viruses, protozoans, small crustaceans, and other tiny organisms. At the larger end of the scale, megaplankton are any plankton over 2 centimeters (0.8 inches) in size, and include large animals, such as cephalopods and jellyfish. The largest plankton is the lion's mane jellyfish, which can reach 2.5 meters (8.2 feet) in diameter and grow tentacles more than 36.5 meters (120 feet) long.
Role
Plankton and krill serve similar, but slightly different, roles in the food chain. Phytoplankton synthesize nutrients, while bacterioplankton recycle nutrients from decomposing matter in the ocean, providing some of the fundamental sources of nutrition for all ocean creatures. Zooplankton serve to concentrate those nutrients by eating smaller plankton and serving as food for larger creatures. Krill are one step up in the food chain, eating plankton and serving as a nutrient bridge from microscopic life forms to larger fish and mammals.
Light is produced by which fundamental force?
strong nuclear
electromagnetic
weak nuclear
gravitational
Answer:
ans: Electromagnetic
Answer:
B on edg.
Explanation:
If all objects that have mass also have gravity, why doesn't your pencil get pulled towards you while it sits on your desk?
Answer:
The pencil is not pulled towards a person due to a very small magnitude of force between them, due to lighter masses.
Explanation:
Let us apply Newton's Law of Gravitation between a person and pencil.
Average Mass of a Normal Pencil = m₁ = 10 g = 0.01 kg
Average Mass of a Person = m₂ = 80 kg
Distance between both = r = 1 cm = 0.01 m (Taking minimal distance)
Gravitational Constant = G = 6.67 x 10⁻¹¹ N.m²/kg²
So,
F = Gm₁m₂/r²
F = (6.67 x 10⁻¹¹ N.m²/kg²)(0.01 kg)(80 kg)/(0.01 m)²
F = 5.34 x 10⁻⁷ N
This Force is very small in magnitude due to the light masses of both objects.
Therefore, the pencil is not pulled towards a person due to a very small magnitude of force between them, due to lighter masses.
Determine the average speed of an object that travels 200 miles in 4 hours.
Answer:
The average speed is 50 miles per hour
Explanation:
Speed is equals to distance divided by time
Then substitute your variables into the equation
Hope this helps
please mark as brainliest
which one of the following is a derived Si unit a. Newton, b. Meter, c. Mole, d. Kiogram
Answer:
The SI is founded on seven SI base units for seven base quantities assumed to ... The SI derived units for these derived quantities are obtained from these ... mass density, kilogram per cubic meter, kg/m3 ... amount-of-substance concentration, mole per cubic meter, mol/m3 ... solid angle, steradian (a), sr (c), -, m2·m-2 = 1 (b).
Kilogram is a derived SI unit of the following.
Thus, A universal standard for expressing the magnitudes or quantities of significant natural events is the International System of Units.
The acronym SI, which derives from the French term Systèm international stands for the System of Units, also known as the metric system. The meter-kilogram-second (MKS) system, an earlier unit of measurement, serves as the foundation for the SI standard.
The SI standard is promoted and explained by the Bureau international des poids et mesures (BIPM). The organization was founded in 1875 and is known as the International Bureau of Weights and Measures in English. It is governed by the International Committee for Weights and Measures (CIPM).
Thus, Kilogram is a derived SI unit of the following.
Learn more about Kilogram, refer to the link:
https://brainly.com/question/29761698
#SPJ2
An object with a mass of 5kg has a force of 20N applied to it. What is the resulting acceleration of the object?
Answer:
The answer is 4 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
where
f is the force
m is the mass
From the question
f = 20 N
m = 5 kg
We have
[tex]a = \frac{20}{5} \\ [/tex]
We have the final answer as
4 m/s²Hope this helps you
Which of the following statements about the technique of hypnotic regression is not true?
O Recovered memories are not reliable.
Courts often depend upon recovered memories.
O Memories may be planted by the hypnotist.
The process may create stress for the subject.
Answer:
B. is the correct answer just took the topic review.
Explanation:
Edge2020. Hope that this helps! Peace and Love
Courts often depend upon recovered memories is the wrong statement about the hypnotic regression.
What is hypnotic regression?Hypnotic regression is a contentious method because it can have a number of negative effects on the subjects who undergo it. For the beginners, the memories recovered through any regression can be doubtful and not trust-worthy. All the suggestions or leading questions from the hypnotist or other people of witnesses can affect the memory.
The previous lives memories will be found by the hypnotic technique as a past life regression. If they used to remember the past life by this method they have high chance of getting into the traumas.
Regression therapy mostly used to identify the cause of your current thoughts and reactions. Therapists who is using this techniques to access subconscious memories that are guiding your current behaviour.
Regression therapy is a method of treatment that could approach and focuses on resolving particular past events that are thought to be interfering or relatable with a person's current mental and emotional well-being.
Hence, Option B is the correct answer.
Learn more about Hypnotic regression,
https://brainly.com/question/14703250
#SPJ6
why are force and velocity different?
Answer: If you apply force to an object the velocity changes. But it doesn't work the other way around apply velocity and the force (no!) Velocity does not change on an object. A force pushes or pulls on an object, but velocity is simply something an object has I hope this makes sense to you. Hope this helps :)
Explanation:
What is the coefficient of friction of an object with a weight of 300 N and a force of friction of 150 N?
1
0.75
.5
0
Answer:
0.5
Explanation:
Given parameters:
Weight of object = 300N
Force of friction = 150N
Unknown:
Coefficient of friction = ?
Solution:
Frictional force is a force that resists the motion of a body.
It is mathematically expressed as;
frictional force = uN
Where u is the coefficient of friction
N = Normal force = weight of the object
Now input the parameters and find u;
150 = u x 300
u = [tex]\frac{150}{300}[/tex] = 0.5
The coefficient of friction here is 0.5
Define what velocity means.
Answer:
The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).
A car accelerates uniformly from rest to a speed of 6.6 m/s in 6.5 s. Find the acceleration the car presents during this time?
Answer:
1.02 m/s²
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 0 m/s
Final velocity (v) = 6.6 m/s
Time (t) = 6.5 s
Acceleration (a) =.?
Acceleration can simply be defined as the change of velocity with time. Mathematically, it can be expressed as:
a = (v – u) / t
Where:
a is the acceleration.
v is the final velocity.
u is the initial velocity.
t is the time.
With the above formula, we can obtain the acceleration of the car as follow:
Initial velocity (u) = 0 m/s
Final velocity (v) = 6.6 m/s
Time (t) = 6.5 s
Acceleration (a) =.?
a = (v – u) / t
a = (6.6 – 0) / 6.5
a = 6.6 / 6.5
a = 1.02 m/s²
Therefore, the acceleration of the car is 1.02 m/s²
4. A cylindrical tube has a length of 14.4cm and a radius of 1.5cm and is filled with a colorless gas. If the density of the gas is known to be 0.00123g/cm', what is the mass of the gas in the tube in mg?
Answer:
Mass, m of gas is 0.2504 grams.
Explanation:
First, we need to solve for the volume of the cylindrical tube.
Volume of cylinder is given by the formula;
[tex] V = 2\Pi r^{2}h[/tex]
Where, V represents volume.
π represents pie
r represents radius.
h represents height or length.
Given the following data;
Radius, r = 1.5cm
Length, h = 14.4cm
Density, d = 0.00123g/cm³
Substituting into the equation;
[tex] V = 2 * 3.142 * (1.5)^{2}14.4[/tex]
[tex] V = 2 * 3.142 * 2.25 * 14.4[/tex]
[tex] V = 203. 6016[/tex]
Therefore, the volume of the cylindrical tube is 203. 6016cm³
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex]Density = \frac{mass}{volume}[/tex]
[tex] Mass = density * volume [/tex]
Substituting into the equation, we have;
[tex] Mass = 0.00123 * 203. 6016 [/tex]
Mass = 0.2504g.
Write a brief summary of table tennis or tennis
Answer:
A point is won by a player when the opponent cannot hit the ball with a racket over the net and onto the other side of the table. Each game is won by being the first player to win 11 points, and be at least 2 points ahead of their opponent. The equipment needed to play table tennis would be a table, rackets, and balls. Some of the rules are no hand-on table (even leaning your hands on the table is not allowed!) Also, if the ball hits the net, you have to serve again.
Lucy and JoJo need to make 140 cupcakes for the school dance. Lucy made 35 of the cupcakes. JoJo made 42 cupcakes What fraction of the cupcakes do Lucy and JoJo still need to make?
Answer:
9/20
Explanation:
According to this question, Lucy and JoJo need to make 140 cupcakes for the school dance. Lucy made 35 of the cupcakes while JoJo made 42 cupcakes. This means that in total, (42 + 35) cupcakes has been made by both Lucy and JoJo
That is, 77 cupcakes out of 140 has been made. This is 77/140 i.e. 11/20
Since 77/140 cupcakes has been made, Lucy and JoJo still need to make;
140 - 77 = 63 cupcakes to meet up their target for the school dance.
This means that the fraction left is 63/140
63/140 in its lowest term is 9/20
Hence, 9/20 of the cupcakes still need to be made by Lucy and JoJo.
Explanation: 140 - 35 = 105 - 42 = 63
yare yare daze
I use tusk act 4 main
Can someone please Help me
Answer: The answer to 3 to is less inertia. The answer to 4 is large amount of inertia. The answer to 5 is large amount of inertia. The answer to 6 is more fuel. Number 6 is kind of unkown considering I can’t see the other answer but I guess it’s more fuel.
Explanation: Inertia is the resistance of the object to any change in its motion, including a change in direction. An object will stay still or keep moving at the same speed and in a straight line, unless it is acted upon by an external unbalanced force. So when there is more inertia, it’s harder to control, but when it has less inertia, it’s more loose and easier to move around.
A car travels at a constant speed of 70 km/hr for 15 minutes. The car decreases its speed from 70 to 40 km/hr over the next two minutes and then continues to travel at a constant speed of 40 km/hr for the next 5 minutes Which of the following graphs best represents the car's motion during the given time period?
Answer:
A car travels at a constanT
Where would the net force acting on a charge placed in a system of like charges be zero?
Answer:
If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.
If an object is moving with constant acceleration, its velocity must
a
change by varying amounts depending on its speed.
b
always decrease.
c
be constant also.
d
change by the same amount each second.
An object moves 120 m in 15 seconds. Calculate
the object's speed.
Answer:
8m/s
Explanation:
speed= distance/time
s= 120/15
= 8m/s
What the meaning of centerpiece
Answer:
1 : an object occupying a central position especially : an adornment in the center of a table. 2 : one that is of central importance or interest in a larger whole the centerpiece of a political agenda.
Explanation:
It is your parent's 25th Wedding Anniversary and you thought it would be special to throw them a surprise party. Your entire family is up north at your Traverse City cottage (240 miles from your home) and you plan on waking up early Saturday morning to drive home and set up for the party. You wake up at 10:00 am to head out but to your surprise your parents decide on leaving at 11:00 am instead of 1:00 pm like they originally planned. Your father ALWAYS drives 60 miles per hour on the expressway and it will take you about 2 hours to set up for the party. How fast must you drive in order to get home in enough time to make the surprise a success? Show your work.
Answer:
120 miles per hour.
Explanation:
We need to find the time it takes my parents to drive home from the cottage. Since my father drives at 60 miles per hour, and the cottage is 240 miles from our home, and distance = speed × time. So, time = distance/speed = 240 mi/60 mi/h = 4 h.
So, it will take my father 4 hours to drive home from the cottage.
Since I have 2 hours to prepare for the party, the time left for me to drive to the cottage is 4 - 2 hrs = 2 hrs.
So, I'm supposed to drive to the cottage in at most 2 hours.
The speed at which I must drive in this time period is thus, speed = distance/time = 240 miles/2 hours = 120 miles per hour.
So, I must drive at a minimum speed of 120 miles per hour.
A 10 kg box is resting on the table. What is the normal force on the box?
Answer:
normal force and gravitational force are equal. change kg to newtons
98N
Explanation:
The normal force on the box resting on the table is 98 N.
The given parameters;
mass of the box, m = 10 kgThe normal force on the box resting on the table is the force acting perpendicular to the box and it is calculated as follows;
Fₙ = mg
where;
m is the mass of the boxg is the acceleration the to gravityFₙ = 10 x 9.8
Fₙ = 98 N
Thus, the normal force on the box resting on the table is 98 N.
Learn more here:https://brainly.com/question/14486416
The chart shows data for four different moving objects.
A 3 column table with 4 rows. The first column is labeled object with entries W, X, Y, Z. The second column is labeled mass in kilograms with entries 10, 18, 14 and 30. The last column is labeled velocity in meters per second with entries 8, 3, 6, 4.
Which shows the order of the objects’ kinetic energies, from least to greatest?
W, Y, X, Z
Z, X, Y, W
W, Y, Z, X
X, Z, Y, W
Answer: X, Z, Y, W.
Explanation: From the formula the velocity is squared which means it can have a significant impact on kinetic energy, thus the higher the velocity the higher the kinetic energy. The kinetic energy is also impacted by the mass of a body, such that the higher the mass the higher the kinetic energy.
Answer:
D
Explanation:took the test
Together, Denise and her brother painted a total of 3 5 of a living room wall. Denise painted 3 5 of that part, and her brother painted the rest. What part of the living room wall did Denise paint herself? Denise paintedof the living room wall.
Answer:
9 ÷ 25
Explanation:
The computation of the part of the living room that should be painted is shown below:
= Living room painted × rest of the part painted
= 3 ÷ 5 × 3 ÷ 5
= 9 ÷ 25
We simply multiplied with the above two items and the same is to be considered
hence, the part of the living room i.e. painted is 9 ÷ 25
The same is to be considered
PLEASE HELP THIS IS DUE IN 10 MINUTES- (15 points!)
1st question- what are the weather fronts(use the pic for help)
2nd question- who has better weather— high pressure systems or low pressure systems and how do you know?
(Please add explanation)<3
Answer: I would say that B would have better weather because those dots on the right are cold fronts and the smooth side without the dots is a warm front. I hope this helps :)
Explanation:
A long jumper leaves the ground at an angle of 25 degrees with respect to the horizontal with a resultant velocity of 30 ft/s. What was the horizontal velocity of the jumper at takeoff? What was the vertical velocity at takeoff? How high did the COM rise above the point of takeoff?
Answer:
The horizontal component of the velocity is 27.19 ft/s
The vertical component of the velocity at takeoff is 12.68 ft/s
The vertical distance traveled by the jumper is 8.2 ft
Explanation:
Given;
angle of projection or takeoff, θ = 25°
the resultant velocity, v = 30 ft/s
The horizontal component of the velocity is given by;
[tex]v_x = vcos \theta\\\\v_x = 30 * cos(25)\\\\v_x = 27.19 \ ft/s[/tex]
The vertical component of the velocity at takeoff is given by;
[tex]v_y = vsin \theta\\\\v_y = 30 * sin(25)\\\\v_y = 12.68 \ ft/s[/tex]
The vertical distance traveled by the jumper is given by;
[tex]v_y_f^2 = v_y_o^2 +2(-g)h\\\\v_y_f^2 = v_y_o^2 -2gh\\\\0 = 12.68^2 - (2*9.8)h\\\\0 = 160.78 - 19.6h\\\\19.6h = 160.78\\\\h = \frac{160.78}{19.6}\\\\ h = 8.2 \ ft[/tex]