Answer: milligrams
Explanation:
Because 0.007960 = 1.75487961e-5 pounds
And 0.7960= 1.75488e-6
Is BaOH2 soluble or insoluble in water?
Answer:
Explanation:
Tough question.
The answer is very dependent on the temperature of the water. At 0o C, less than 5 grams is soluble in water.
The curve increases as the temperature increases. At 80oC about 35 grams is soluble in water 100 mL of water. So Ba(OH)2 is very soluble at higher temperatures.
Maybe the question can be resolved just a little better at room temperature. The solubility is still less than 5 grams / 100 mL. That makes it slightly soluble or more soluble than other things.
So to answer the question, you need to specify the temperature. I would say it is, but be prepared to defend your answer.
During ionic bonding, there is a transfer of electrons...
O from one metallic element to a different metallic element
O from one nonmetallic element to a different nonmetallic element
O from one metallic element to a different metalloid
O from one metallic element to a different nonmetallic element
Answer:
from one metallic element to a different nonmetallic element
Explanation:
For example NaCl is ionic compound in which Na metal donate electron to Cl non metal
15 grams of hydrogen and 7.5 grams of oxygen were placed in a beaker. An explosion happened inside the baker that produced water. The beaker was never opened. How many grams of water were produced?
Answer:
16.8768 g
Explanation:
The reaction that takes place is:
2H₂ + O₂ → 2H₂OFirst we convert the mass of hydrogen and oxygen into moles, using their respective molar masses:
H ⇒ 15 g ÷ 1 g/mol = 15 mol HO ⇒ 7.5 g ÷ 16 g/mol = 0.4688 mol OThere are significantly less oxygen moles than hydrogen moles, so oxygen is the limiting reactant.
We calculate the produced moles of water, using the moles of the limiting reactant:
0.4688 mol O * [tex]\frac{2molH_2O}{1molO_2}[/tex] = 0.9376 mol H₂OFinally we convert water moles into grams, using its molar mass:
0.9376 mol H₂O * 18 g/mol = 16.8768 gLook at the questions labelled A, B, C, D. A How many substances are there in drinking water? B How much fluoride is in drinking water? C Is fluoride soluble in drinking water? D Should fluoride be added to drinking water? Which one of the questions cannot be answered by science alone? Tick one box.
Answer:
Magnesium, calcium and sodium.
Explanation:
Magnesium, calcium, sodium, and other beneficial minerals are the substances present in drinking water. Different regions have different fluoride concentration in their water such as in sea water, fluoride level is 1.1 mg/L while in surface water, the concentration is 0.01–0.3 ppm. Yes, fluoride is soluble in water. No, fluoride should not be added to drinking water because it harm for health. All the questions can be answered by science because it is related to chemistry.
which expression has a value of 10
A. (10+10)/5-3
B. (10+10)/(5-3)
C. (10+10/5)-3
D. 10+10/(5-3)
(math)
Students are discussing the pros and cons of petroleum as a naturals resource. Which of the following do you agree with?
Answer:
this is a multiple choice question where are the answers
Explanation:
What is the number of electronsin hydrogen
Answer:
There's only one electron in hydrogen.
Answer:
Hydrogen contain 1 electron
Explanation:
The current model of the atom suggests that ?
Answer:
i dont see the model bro
Explanation:
Answer:
The current model of the atom shows an atom that is mostly empty space. In the center is a small nucleus made of protons and neutrons.
Explanation:
What is the difference between the Lewis model and the valence-shell electron pair repulsion (VSEPR) model?
A.
Only the Lewis model shows the covalent bonds in a molecule.
B.
Only the VSEPR model can be used to explain intermolecular forces.
C.
Only the Lewis model takes into account unbonded electrons.
D.
Only the VSEPR model shows the geometric shape of a molecule.
Answer: only the VSEPR mode shows the geometric shape of a formula.
Why are bubbles and color changes not always chemical change?
Help, please, I really need it.
Answer:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
Which of the following measurements are required to find the work done on an object?
1. The mass and volume of the object
2. The volume of the object and the distance the object moved
3. The force exerted on the object and the distance the object moved
4. The force exerted on the object and the time it took to move the object
Answer:
1.p=mV................
The diagram shows a homemade car being pushed with a force of 25 N. The force causes the car to move at a constant speed of 3 m/s2. What will happen if the force is changed to 35 N?
Answer:
The acceleration of the car will increase drastically
Explanation:
Based on newtons second law of motion, the force applied on a body is directly proportional to the product of its mass and acceleration;
Force = mass x acceleration
Since the mass of the car is constant, an increase in force will cause an increase in acceleration.
A decrease in the force will impact a lesser acceleration on the motor car.
This way, the change in velocity of the body per unit of time will increase drastically.
Define chemical reaction
Answer:
a process that involves rearrangement of the molecular or ionic structure of a substance, as distinct from a change in physical form or a nuclear reaction.
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
hope this helps ^^
how to find the number of atoms present in 22g of co2
Answer:
22g of 2
C
O
2
have 3.011×1023
3.011
×
10
23
2
C
O
2
molecules.
Explanation:
Hope this helps! ^^
A gas was at STP. If the pressure increased to 3.5 atm, what would the new
temperature be?
Answer:
T₂ = 956.0 K
Explanation:
Given data:
Initial temperature = 273.15 K
Initial pressure = 1 atm
Final pressure = 3.5 atm
Final temperature = ?
Solution:
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
1 atm / 273.15 K = 3.5 atm / T₂
T₂ = 3.5 atm ×273.15 K / 1 atm
T₂ = 956.0 atm. K / 1 atm
T₂ = 956.0 K
In every chemical reaction that produce energy, ____ react with ________ ?
Answer:
Acid reacts with water?
Explanation:
Can someone help?? This is really hard.
Answer:
See Explanation
Explanation:
Let us consider the first two reactions, the initial concentration of CO was held constant and the concentration of Hbn was doubled.
2.68 * 10^-3/1.34 * 10^-3 = 6.24 * 10^-4/3.12 * 10^-4
2^1 = 2^1
The rate of reaction is first order with respect to Hbn
Let us consider the third and fourth reactions. The concentration of Hbn is held constant and that of CO was tripled.
1.5 * 10^-3/5 * 10^-4 = 1.872 * 10^-3/6.24 * 10^-4
3^1 = 3^1
The reaction is also first order with respect to CO
b) The overall order of reaction is 1 + 1=2
c) The rate equation is;
Rate = k [CO] [Hbn]
d) 3.12 * 10^-4 = k [5 * 10^-4] [1.34 * 10^-3]
k = 3.12 * 10^-4 /[5 * 10^-4] [1.34 * 10^-3]
k = 3.12 * 10^-4/6.7 * 10^-7
k = 4.7 * 10^2 mmol-1 L s-1
e) The reaction occurs in one step because;
1) The rate law agrees with the experimental data.
2) The sum of the order of reaction of each specie in the rate law gives the overall order of reaction.
What is the cost in dollars for the nails used to build a fence 80 meters long if it requires 30 nails per meter? There are 40 nails per box at a cost of 75 cents per box
Answer:
4500 cent
Explanation:
From the question, we were told that
a fence 80 meters long requires 30 nails per meter.
1 metre fence = 30 nails
Then 80 meters long= ( 30 × 80)
= 2400 nails
Which means a fence 80 meters long will require 2400 nails in total.
We need to find the cost in dollars for the nails to build a fence 80 meters long.
We know that 40 nails per box will cost 75 cents per box.
(2400 nails/40 nail per box)= 60 box
Then 60 box will be needed to complete the fence.
the cost in dollars for the nails to build a fence 80 meters long= (60 box × 75 cent per box)=4500 cent
226
) Which equation represents the radioactive decay of Ra?
88
Answer:
A
Explanation:
The study of a chemical is called chemistry.
The correct answer is A
Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive.
The radioactive of the Ra is option A that is:-
[tex]RA^{226}_{88}----->Rn^{222}_{86} +He^4_2[/tex].
During the decomposition, the element is breakdown into the neutron, proton, and electron.
Hence, the correct answer is A.
For more information, refer to the link:-
https://brainly.com/question/14698383
What is the asthenosphere?
Question 3 options:
The hot, rigid inner part of the upper mantle which can’t flow
The hot, weak inner part of the upper mantle which can flow
The hot, weak outer part of the lower mantle
None of the above
Answer:
None of the Above
Explanation:
The Athenosphere is able to flow but is also part of the UPPER LAYER meaning none of these choices are correct
determine the hydronium ion concentration of an aqueous solution that has a pH of 4.0
Answer:
Imagewww.chem.purdue.edu › Equilibrium
Calculating the Hydroxide Ion Concentration from pOH
To calculate the pH of an aqueous solution you need to know the concentration of the hydronium ion in moles per liter ...
Calculating pH
Calculating hydronium ion ...
Calculating pOH
Calculating hydroxide ion ...
Calculating pKa
People also ask
How do you find hydronium ion concentration when given pH?
The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH) Example: What is the hydronium ion concentration in a solution that has a pH of 8.34? On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34).
Where does the energy of a nuclear power plant come from?
A) the radiation released by unstable uranium isotopes
B) the heat energy released during nuclear fusion
C) the radiation released when hydrogen fuses into helium
D) the heat energy released during nuclear fission
Answer:
The heat energy released during nuclear fusion
The heat energy released during nuclear fusion. The correct option is D.
Thus, The Sun and other stars are powered by nuclear fusion reactions. A heavier nucleus is created when two light nuclei fuse together in a fusion reaction.
Because the mass of the resulting single nucleus is smaller than the combined mass of the two initial nuclei, the process produces energy. Remaining mass is converted to energy.
Why this happens is explained by Einstein's equation (E=mc2), which states in part that mass and energy can be transformed into one another. Fusion energy could be a significant source of energy generation if scientists can figure out how to use it in equipment on Earth.
Thus, The heat energy released during nuclear fusion. The correct option is D.
Learn more about Nuclear fusion, refer to the link:
https://brainly.com/question/33558814
#SPJ2
3. Which of the following items is representative of a homogeneous
mixture?
2 points
A. spaghetti & meatballs
B. cheeseburger
C. white bread dough
D. smoothie
E. Both A and B
O F. Both C and D
4. Which of the following is a chemical property of matter?
Answer: F. both c and d
Explanation:
homogeneous mixture is of same kind/phase. so the most appropriate answer we can take is smoothie and white bread dough :)
Which evidence shows that heat is given off when a candle burns?
A. A match is used to light the candle.
B. The burning candle produces a yellow flame.
O c. Covering the burning candle extinguishes the flame.
D. Solid candle wax near the flame melts as the candle burns.
thing
Answer:
D. solid candle wax near the flame melts as the candle burns.
Answer:
Part D, melting is a product of heating
Explanation:
If you have a 17% salt solution, how much salt will need to be added to 71 mL of water?
Salt added : 14.5 g
Further explanationGiven
17% salt solution
71 ml water
Required
salt needed
Solution
%mass = (mass solute : mass solution) x 100%
71 ml water = 71 g water(density = 1 g/ml)
mass solute = x
[tex]\tt 17\%=\dfrac{x}{x+71}\times 100\%\\\\0.17(x+71)=x\\\\0.17x+12.07=x\\\\0.83x=12.07\\\\x=14.5[/tex]
As an electron in an atom moves from a higher energy state to a lower energy state, the atom
1 becomes a negative ion
2 becomes a positive ion
3 releases energy
4 absorbs energy
Answer:
3 releases energy
Explanation:
An electron in an energy level has a definite amount of energy associated with it at that level.
Electrons can undergo transitions from one level to another. However, when the electron changes its state, it must absorb or emit the exact amount of energy which will bring it from the initial to the final state.
When the electron is excited, it moves from the ground state to an excited state, it must absorb energy. On returning from an excited state to a lower level or the ground state, energy is emitted, giving rise to a line in the spectrum.
Answer: 3 because it releases energy
Chemistry Conversion: Convert 3.0099 dumps to wigs. 6375.23 dumps = 1 wig Round your answer to 5 sig figs. dumps and wigs is not a real unit just used for example.
Answer:
There are 0.00047212 wig in 3.0099 dumps.
Explanation:
In this problem, we need to convert 3.0099 dumps to wigs.
6375.23 dumps = 1 wig (given)
1 dump = (1/6375.23) wig
To convert 3.0099 dumps to wigs, multiply 3.0099 by (1/6375.23).
3.0099 dumps = [tex]\dfrac{1}{6375.23}\cdot3.0099[/tex]
= 0.00047 wig
Hence, there are 0.00047212 wig in 3.0099 dumps.
Determine the number of valence electrons for following (Ne) 3s2 3p4
a.3
b.2
c.4
d.7
e.16
f.6
Pls help
Answer:
F. 6
Explanation:
21) What is the volume (inL) of 3470 g of liquid glycerol, which has a density of 1.26 g/?
Answer:
V = 2.75 L
Explanation:
Given that,
Mass of liquid glycerol, m = 3470 g
The density of liquid glycerol, d = 1.26 g/cm³
We need to find the volume of liquid glycerol.
We know that,
Density=mass/volume
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{3470\ g}{1.26\ g/cm^3}\\\\V=2753.96\ cm^3[/tex]
We know that, 1 cm³ = 0.001 L
V = 2.75 L
So, the volume of liquid glycerol is 2.75 L.