which is the best page-replacement algorithm is used when a grocery/drug store manager moves products to the end-of-aisle shelving (known as end caps) with reduced prices (after which the products will be discarded)?

The problem can be solved using the concept of graph theory. We can represent the group of people as a graph, where each person is a node, and there is an edge between two nodes if they know each other.

If a person is not connected to anyone else, we can consider them as a separate connected component.To select m people such that each person i is either selected or knows someone in the selected group, we can use a modified version of the Breadth-First Search algorithm. We start by selecting the first person arbitrarily and add them to the selected group. We then perform a Breadth-First Search, starting from this person, and adding all the people we encounter to the selected group, up to a total of m people.During the Breadth-First Search, we can maintain a list of people who have already been added to the selected group, and skip them if we encounter them again. This ensures that we only select people who are not already known by someone in the selected group.If we are unable to select m people using this approach, we can increase the number of selected people and repeat the process until we have selected the required number of people. this approach ensures that we select a group of m people such that each person i is either in the selected group or known by someone in the group.

To learn more about nodes click the link below:

brainly.com/question/28269884

#SPJ4

The address of the last location of the on-chip ROM for each of the mentioned chips is as follows:

- DS5000-16: The address of the last location of the on-chip ROM is 0x3FFF.
- DS5000-8: The address of the last location of the on-chip ROM is 0x1FFF.
- DS5000-32: The address of the last location of the on-chip ROM is 0x7FFF.
- AT89C52: The address of the last location of the on-chip ROM is 0x1FFF.
- 8751: The address of the last location of the on-chip ROM is 0x0FFF.
- AT89C51: The address of the last location of the on-chip ROM is 0x0FFF.
- DS5000-64: The address of the last location of the on-chip ROM is 0xFFFF.

These addresses are the maximum addresses that can be accessed by the respective chips. The on-chip ROM is used to store the program code and data that are required for the operation of the chip. Each chip has a different amount of on-chip ROM, and therefore the address of the last location of the on-chip ROM is different for each chip.

Learn more about location of the on-chip ROM:

https://brainly.com/question/14069470

#SPJ11

The best access method that would provide the best security for this new datacenter is B: site-to-site VPN.

A site-to-site VPN (Virtual Private Network) is a secure way to connect two networks over the internet. It creates a secure tunnel between the two networks and encrypts all the data that is transmitted between them. This ensures that the data is protected from any unauthorized access or tampering.

A site-to-site VPN is also more efficient than other access methods, as it allows for seamless communication between the two networks without the need for additional hardware or software.In conclusion, a site-to-site VPN is the best access method for providing secure communication between the new datacenter and the old datacenter.

"

Complete question

A network administrator is designing a new datacenter in a different region that will need to communicate to the old datacenter with a secure connection. Which of the following access methods would provide the BEST security for this new datacenter?

A:  Virtual network computing

B: site-to-site VPN.

C: Secure Socket

"

You can learn more about site-to-site VPN at

https://brainly.com/question/26327418

#SPJ11

Data bars are a type of data visualization used in Excel that displays the value of a cell relative to other cells in the same column. They are often used to visually represent data in a spreadsheet, making it easier to compare values and identify trends.

Sparklines, on the other hand, are a type of data visualization that displays a small chart within a single cell. They are used to show trends or patterns in data over time and can be displayed as a line, column, or win/loss chart.

The main difference between data bars and sparklines is that data bars are used to compare values within a column, while sparklines are used to display trends or patterns in data over time. Data bars are also larger and more visually prominent than sparklines, which are designed to be small and unobtrusive.

In conclusion, data bars and sparklines are both useful data visualization tools in Excel, but they are used for different purposes and display data in different ways. Data bars are used to compare values within a column, while sparklines are used to display trends or patterns in data over time.

Learn more about data: https://brainly.com/question/26711803

#SPJ1

Answer:

To calculate the profit on the sale, we need to know the selling price of the laptop. If the salesperson sold the laptop for Rs. 60,600, then the profit can be calculated as follows:

Profit = Selling Price - Cost Price

Profit = Rs. 60,600 - Rs. 54,500

Profit = Rs. 6,100

So the profit on the sale is Rs. 6,100.

Example of a "program" assuming its "code":

#!/usr/bin/env python3

cost_price = 54500

selling_price = 60600

profit = selling_price - cost_price

print("The profit on the sale is Rs.", profit)

Assuming you have some coding knowledge. You should be able to turn this into an executable for Python 3.

An internationally recognised credential for information security professionals is the Certified Information Systems Security Professional (CISSP) exam.

Candidates must have at least five years of total paid full-time job experience in at least two of the eight test domains to be eligible to take it. (ISC)² CISSP Common Body of Knowledge (CBK).The eight domains of the CBK are Security and Risk Management, Asset Security, Security Engineering, Communications and Network Security, Identity and Access Management, Security Assessment and Testing, Security Operations, and Software Development Security.In addition to the work experience requirement, candidates must also adhere to the (ISC)² Code of Ethics, agree to the Candidate Agreement, and get a scaled score of at least 700 out of a possible 1000 points to pass the CISSP test. The exam consists of 250 multiple-choice and advanced innovative questions and is six hours long.

To learn more about security click on the link below:

brainly.com/question/13477181

#SPJ4

The best way that Safiya can improve the ability of the machine learning algorithm to detect all pedestrians is by adding videos of people using wheelchairs and strollers into the training data set. Option A is correct.

By adding more examples of people using wheelchairs and strollers to the training data, the machine learning algorithm can learn to recognize the unique features and movement patterns of these individuals and improve its ability to detect them.

Crowd-sourcing the data can be a good approach if the required videos are not readily available. Adding rules to the network can be helpful, but it may not be sufficient in detecting all types of pedestrians and can lead to overfitting.

Therefore, adding more diverse training data is generally a better approach for improving the performance of the algorithm. The correct answer is A.

Safiya is a software engineer at a company that's developing software for self-driving cars. she's working on software that uses computer vision and machine learning algorithms to detect pedestrians walking near the car and trigger the brakes when needed. after training the algorithm on a large dataset of training data (videos of pedestrians walking near cars), they try it out in cars with backup drivers. the drivers report that it detected most pedestrians, but failed to detect people using wheelchairs and parents pushing strollers. the drivers had to manually respond in those cases.

What's the best way that Safiya can improve the machine learning algorithm's ability to detect all pedestrians?

A. She can add videos of people using wheelchairs and strollers into the training data set (perhaps crowd-sourcing them if there are none already available).

B. She can double the size of the training data set by partnering with another company in the self-driving car industry.

C. She can program rules into the network about the shapes and movement patterns of wheelchairs and strollers.

D. She can reduce the size of the training data set, removing videos of single pedestrians walking on foot such that the resulting dataset has a higher fraction of pedestrians using wheelchairs and strollers.

Learn more about the machine learning algorithm https://brainly.com/question/30352563

#SPJ11

Answer:

Algorithm efficiency relates to how many resources a computer needs to expend to process an algorithm. The efficiency of an algorithm needs to be determined to ensure it can perform without the risk of crashes or severe delays. If an algorithm is not efficient, it is unlikely to be fit for its purpose.

The 10 parts of a hand tractor that needs to be checked are fuel tank, oil levels, air filter, battery, tires, cooling system, brakes, steering and lights.

Check the fuel tank - Ensure there is enough fuel for the tractor to operate.
Check the oil levels - Ensure the oil levels are sufficient for the engine to run smoothly.
Check the air filter - Ensure that the air filter is free from dirt or debris that could cause engine problems.
Check the battery - Ensure that the battery is fully charged and functioning correctly.
Check the tires - Ensure the tires are inflated to the right pressure and not showing any signs of wear and tear.
Check the cooling system - Ensure the cooling system is functioning correctly and that there are no leaks.
Check the brakes - Ensure that the brakes are in good condition and functioning correctly.
Check the exhaust system - Ensure that the exhaust system is not leaking and is operating correctly.
Check the steering - Ensure that the steering is in good condition and not showing any signs of wear and tear.
Check the lights - Ensure that the headlights, tail lights and indicators are all working correctly.

For such more question on fuel tank:

https://brainly.com/question/30469704

#SPJ11

After conducting some research, here are my recommendations for the best certified maintenance providers for each flight system:

DJI Matrice 200: As the Matrice 200 is a popular drone model, there are many certified maintenance providers available. However, based on customer reviews and ratings, I would recommend DroneNerds for maintenance services. DroneNerds is an authorized DJI dealer and repair center, and they offer a variety of maintenance and repair services for DJI drones, including the Matrice 200.

Yuneec Typhoon H: For the Yuneec Typhoon H, I recommend going with Yuneec's own repair and maintenance service. Yuneec offers a comprehensive repair and maintenance program that covers everything from routine maintenance to major repairs.

Parrot Disco - Pro Ag: For the Parrot Disco - Pro Ag, I recommend reaching out to Dronefly for maintenance and repair services. Dronefly is a certified dealer and repair center for Parrot drones, and they offer a range of maintenance and repair services for the Disco - Pro Ag.

In summary, my recommendations for certified maintenance providers for the three flight systems are:

Therefore, I suggest that your company research each of these providers further and compare their pricing and services to find the best option for your needs. It's important to have a reliable and certified maintenance provider to ensure the longevity and safe operation of your drones.

Read more about drone service here:

https://brainly.com/question/28425675

#SPJ1

An algorithm is a set of instructions that describes a step-by-step process for solving a specific problem. It is often used in computer programming to automate repetitive tasks and streamline complex operations.

When an algorithm is integrated into a computer program, the process becomes automated, allowing the computer to perform the task repeatedly with minimal input from the user.

However, if the algorithm lacks instructions for handling unexpected or unanticipated results, the computer program may halt or encounter errors, potentially causing significant disruptions to the process.

A recipe can be thought of as an algorithm for cooking a particular dish, with each step outlining a specific action to take in a specific order. Like computer algorithms, recipes can be modified or adapted to suit different needs or preferences, but following the steps in the correct order is essential to achieving the desired outcome.

Find more about Algorithm

brainly.com/question/20533936

#SPJ4

Answer:

An algorithm is a step-by-step method to

A). ✔ solve a problem.

When an algorithm is part of a computer program, the process included in the algorithm

A). ✔ is automated

When an algorithm is used in a computer program, it allows the computer to perform a

C). ✔ repetitive

task.

If the algorithm does not have instructions for unanticipated results, the computer program will

D). ✔ halt

A(n)

C). ✔ recipe

is an algorithm.

Explanation:

I just did the Assignment on EDGE2022 and it's 200% correct!

The question that could not be answered based solely on the information in this data set is (option A) Who did they vote for in the 2016 presidential election?

The data set contains information on the registered republicans in the United States, including their name, age, gender, home address, and whether they voted or not in the 2016 presidential election. However, it does not contain information on who they voted for in the 2016 presidential election. Therefore, we cannot answer this question based on the data set.

On the other hand, the other questions can be answered based on the information in the data set. We can determine how many registered republicans are there in the United States (D) by counting the number of records in the data set. We can also determine their party affiliation (C) since the data set only contains information on registered republicans. Lastly, we can determine how often they vote in elections (B) by looking at the "whether they voted or not in the 2016 presidential election" field in the data set.

Here's the full task:

content loaded

A large data set contains information on all registered republicans in the united states. The following information is recorded: name age gender home address whether they voted or not in the 2016 presidential election.

Which of the following questions could not be answered based solely on the information in this data set?

A. Who did they vote for in the 2016 presidential election?

B. How often do they vote in elections?

C. What is their party affiliation?

D. How many registered republicans are there in the United States?

Learn more about data set: https://brainly.com/question/27358262

#SPJ11

The primary purpose of marking rows with an owner field is to know which rows can be edited or deleted by the current logged in user. This ensures that un-owned rows can be quickly removed.

An owner field is an attribute in a database table that is used to identify the owner of a record. It is a field that is used to hold the name or identifier of the owner of the data. The primary purpose of marking rows with an owner field is to know which rows can be edited or deleted by the current logged in user. It is used in access control, allowing only the authorized user to edit or delete the record.

A database with an owner field ensures the security and privacy of data by preventing unauthorized users from modifying or deleting data.

Learn more about row tables: https://brainly.com/question/30176913

#SPJ11

Answer:

while True:

num = int(input())

if num <= 0:

break

if num % 2 == 0:

print(num)

Explanation:

The while loop runs indefinitely until it encounters a non-positive integer input. Within the loop, we read the integer input using input() and convert it to an integer using int(). We then check if the integer is positive or not. If it is not positive, we break out of the loop. If it is positive, we check if it is even by checking if the remainder after dividing by 2 is 0. If it is even, we print it out using print().

The breadth-first search algorithm structure makes use of the abstract data type queue.

In a breadth-first search algorithm, nodes are explored in a level-by-level order, starting from the root node and moving outwards. The algorithm uses a queue data structure to store the nodes that are waiting to be explored.

Nodes are added to the end of the queue as they are discovered, and they are explored in the order in which they were added to the queue (i.e., the first node added to the queue is the first to be explored).

A queue is a data structure that operates on a first-in, first-out (FIFO) basis. This means that the first element added to the queue is the first to be removed from the queue. In the context of a breadth-first search algorithm, the queue is used to store nodes that have been discovered but have not yet been explored.

Therefore, the answer is "queue".

Learn more about search algorithm here:

https://brainly.com/question/29607067

#SPJ11

a. The assembly program performs the following operations:

- It loads the values of N1, N2, and N3 into registers R5, R6, and R7 respectively.
- It then loads the values stored in the memory addresses pointed to by R5, R6, and R7 into registers R1, R2, and R3 respectively.
- It adds the values in R1 and R2 and stores the result in R4.
- It then adds the value in R3 to the value in R4 and stores the result in R4.
- Finally, it moves the value in R4 to R1 and calls the UART_OutChar function to display the result.

b. The result is not displayed properly because the UART_OutChar function expects a character as input, but the program is providing it with an integer value. The function will therefore display the ASCII character corresponding to the integer value instead of the integer value itself.

To display the result properly, the program needs to convert the integer value to a string of characters before calling the UART_OutChar function.

Learn more about assembly program:

https://brainly.com/question/13171889

#SPJ11

To write a program that reads a JSON file of heap operations, executes the heap operations from the JSON file, and prints the priority queue as a JSON object to stdout, you can use the following steps:

1. Include the necessary libraries for JSON parsing and heap operations. In this case, you can use the nlohmann::json library for JSON parsing and the std::priority_queue library for heap operations.

2. Read the JSON file using the nlohmann::json::parse() function.

3. Create a std::priority_queue object to store the heap elements.

4. Iterate through the JSON object and perform the heap operations based on the "operation" key. If the operation is "insert", insert the key into the priority queue using the std::priority_queue::push() function. If the operation is "removeMin", remove the minimum element from the priority queue using the std::priority_queue::pop() function.

5. Create a new JSON object to store the priority queue as a JSON object.

6. Iterate through the priority queue and add the elements to the JSON object using the nlohmann::json::push_back() function.

7. Print the JSON object to stdout using the nlohmann::json::dump() function.

Here is the sample code for the program:

```cpp
#include
#include
#include
#include "json.hpp"

using json = nlohmann::json;

int main() {
 // Read the JSON file
 std::ifstream file("BuildExample.json");
 json jsonObj = json::parse(file);

 // Create a priority queue to store the heap elements
 std::priority_queue pq;

 // Iterate through the JSON object and perform the heap operations
 for (auto& op : jsonObj.items()) {
   if (op.value()["operation"] == "insert") {
     pq.push(op.value()["key"]);
   } else if (op.value()["operation"] == "removeMin") {
     pq.pop();
   }
 }

 // Create a new JSON object to store the priority queue as a JSON object
 json result;

 // Iterate through the priority queue and add the elements to the JSON object
 while (!pq.empty()) {
   result.push_back(pq.top());
   pq.pop();
 }

 // Print the JSON object to stdout
 std::cout << result.dump(2) << std::endl;

 return 0;
}
```

Note: This code assumes that the JSON file is named "BuildExample.json" and is located in the same directory as the program. You can modify the file name and path as needed.

Learn more about JSON file

https://brainly.com/question/29790553

#SPJ11

To add a print_all() method to the PetData class that makes use of the base class's print_all() method, we can simply call the parent class's print_all() method using the super() function, and then add a print statement for the pet's ID number.

Here's the updated code:

class AnimalData:

   def __init__(self):

       self.full_name = ''

       self.age_years = 0

   def set_name(self, given_name):

       self.full_name = given_name

   def set_age(self, num_years):

       self.age_years = num_years

   def print_all(self):

       print('Name:', self.full_name)

       print('Age:', self.age_years)

class PetData(AnimalData):

   def __init__(self):

       super().__init__()

       self.id_num = 0

   def set_id(self, pet_id):

       self.id_num = pet_id

   def print_all(self):

       super().print_all()

       print('ID:', self.id_num)

# Example usage

user_pet = PetData()

user_pet.set_name('Fluffy')

user_pet.set_age(5)

user_pet.set_id(4444)

user_pet.print_all()

This will produce the following output:

Name: Fluffy

Age: 5

ID: 4444

As expected, the output includes the pet's name, age, and ID number, with the name and age being printed by the print_all() method inherited from the AnimalData class, and the ID number being printed by the print_all() method defined in the PetData class.

Learn more about programming:

https://brainly.com/question/26134656

#SPJ11

The larger the diameter of the pipe, the greater the throughput (volume) of water that flows through it and the faster water is transferred through it. This analogy refers to a network's throughput.

Learn more about network here: https://brainly.com/question/8118353

#SPJ11

The major consideration when selecting a PC for a user who wants to share a keyboard and mouse among three devices is the compatibility of the devices.

Learn more about PC  here: https://brainly.com/question/21474169

#SPJ11

collecting the organization's forms and reports indicates the  good starting point for identifying required user views,when building a relational database for an organization.

The process of designing databases is governed by a few principles. The first rule is that redundant data, sometimes referred to as duplicate data, should never be used because it wastes space and raises the possibility of mistakes and inconsistencies. The completeness and accuracy of the information are crucial, according to the second tenet. Any reports that draw data from your database will do so with inaccurate data if your database itself has any.

Hence, a good database design should:

Use subject-based tables to organize your data and cut down on duplication.

furnishes Access with the data it needs to link the data in the tables as necessary.

ensures the accuracy and integrity of your information while supporting it.

satisfies your reporting and data processing requirements.

learn more about  relational database here:

https://brainly.com/question/13262352

#SPJ1

Answer:

question = "What is the largest planet in our solar system?"

answer = "Jupiter"

user_input = input(question)

if user_input.lower() == answer.lower():

print("That's correct!")

else:

print("Sorry, that's incorrect. The correct answer is", answer)

Explanation:

In this code, we first define the question and answer as variables. Then we use the input() function to prompt the user to enter an answer to the question. We convert the user's input to lowercase using the lower() method to make the comparison case-insensitive.

We then use an if statement to check if the user's input matches the correct answer. If it does, we print a message indicating that the user is correct. If the user's input does not match the correct answer, we print a message indicating that the user is incorrect and we provide the correct answer.

(a) The code initializes two variables, x and y, to the values of 10 and 20, respectively. It then declares a function, f, which takes two arguments, a and b, and returns the result of a + b. The code then calls the function with the values of x and y as arguments, and assigns the result to the variable z. Finally, the code prints the value of z, which is 30.

(b) The variables x, y, and z will be stored in the static memory area, as they are global variables. The variables a and b will be stored in the stack area, as they are local variables within the function f. There are no variables stored in the heap area in this program.

When line 30 is executed, the function f will be called with the values of x and y as arguments. The function will then return the result of a + b, which is 30, and this value will be assigned to the variable z. The diagram below shows the functions in the memory at this point:

|---------------------|
| f(a=10, b=20)      |
|---------------------|
| main()             |
|   x = 10           |
|   y = 20           |
|   z = 30           |
|---------------------|

Learn more about the functions in the memory:

https://brainly.com/question/14241634

#SPJ11

A Class B IP address is a range of IP addresses that begins with the binary digits "10" and has a subnet mask of 255.255.0.0. When a /23 subnet mask is used with a Class B IP address, it means that 23 bits are used for the network portion of the address and the remaining 9 bits are used for the host portion.

To calculate how many bits were borrowed from the host portion of the address, we need to subtract the number of bits used for the network portion (23) from the total number of bits in the host portion (which is 16 bits in a Class B address). 16 - 23 = -7 This calculation gives us a negative number, which is not possible. It indicates that there has been an error in the calculation or that the subnet mask is invalid for a Class B IP address.Therefore, we can conclude that the question is incorrect or incomplete as it does not provide accurate information to determine how many bits were borrowed from the host portion of the address.

To learn more about IP addresses click the link below:

brainly.com/question/16011753

#SPJ4

the complete question is:you have a class B IP address with a subnet mask of /23. How many bits were borrowed from the

host portion of the address?

Answer:

Electrical insulation refers to the process of creating a non-conducting barrier to prevent electrical currents from passing through unwanted areas. The following are some common tools used in electrical insulation:

Insulation tape: This is a type of adhesive tape that is used to wrap around wires, cables or other electrical components to provide insulation. The tape is usually made of plastic, rubber or fiberglass and can withstand high temperatures.

Insulation sleeves: These are tubes made of materials such as rubber, silicone or PVC that are slipped over wires and cables to insulate them from the surrounding environment. They are particularly useful in areas where electrical components are exposed to moisture or dust.

Cable ties: These are plastic straps used to hold together bundles of wires or cables. They are useful for organizing and securing cables and can also prevent the cables from rubbing against each other, which can lead to insulation breakdown.

Heat shrink tubing: This is a type of plastic tubing that shrinks when heated. It is used to insulate electrical connections and can be particularly useful in tight spaces where other insulation materials may be difficult to apply.

Insulation foam: This is a foam material that is sprayed onto surfaces to create a barrier against electrical currents. It is particularly useful for insulating large areas or for filling gaps in insulation.

Insulation gloves: These are rubber gloves designed to protect electrical workers from electrical shock. They are usually worn when working with high voltage equipment.

Insulation mats: These are rubber mats that are placed on the floor to provide a non-conductive surface for workers to stand on when working with electrical equipment.

Overall, these tools are essential in electrical insulation as they help to prevent electrical shocks, fires, and damage to equipment.

Explanation:

To construct two or more database  copies of the same table using a self-join, a table is linked to itself using a table alias. A join condition is then used to match the rows from the various copies of the table.

Data from both tables is retrieved using the INNER JOIN statement, which only returns records or rows with matching values.

When the join condition is met, the MySQL INNER JOIN is utilised to return all rows from all tables.

To know more about database  visit:-

https://brainly.com/question/3804672

#SPJ1

One unique way Accenture could demonstrate our XR capabilities to this manufacturing industry client is by creating a virtual factory using XR technologies.

In this virtual factory, we can recreate the client's manufacturing process, machines, and equipment in a 3D environment using XR technologies such as augmented reality (AR) and virtual reality (VR). This would allow the client to see a digital twin of their physical factory and interact with it in real-time.The client can use this virtual factory to train employees on new equipment, test out new processes, and identify potential issues before implementing them in their physical factory. They can also use it to visualize and plan new layouts or design changes to their physical factory without disrupting production.This demonstration would showcase the power of XR in the manufacturing industry and provide the client with a tangible example of how they can leverage this technology to enhance their operations, increase efficiency, and reduce costs.

To learn more about XR click the link below:

brainly.com/question/30070247

#SPJ4

To simulate the failure of the computing system, we can use a Monte Carlo simulation approach.

Here's the code in Python:

Here's some Python code to perform the simulation:

import numpy as np

# Set parameters

num_sims = 1000

mean_MTBF = 500

restoration_time = 10

# Initialize array to store simulation results

sim_results = np.zeros(num_sims)

# Perform simulations

for i in range(num_sims):

   # Generate random variables for time until server failures

   server1_failure = np.random.exponential(scale=mean_MTBF)

   server2_failure = np.random.exponential(scale=mean_MTBF)

   # Determine which server fails first

   if server1_failure < server2_failure:

       time_to_second_failure = server1_failure + restoration_time

   else:

       time_to_second_failure = server2_failure + restoration_time

   # Store simulation result

   sim_results[i] = time_to_second_failure

# Calculate average time until both servers fail within the restoration time

avg_time = np.mean(sim_results)

print("Average time until both servers fail within the restoration time:", avg_time)

Note that the results may vary slightly each time the simulation is run due to the random nature of the exponential distribution.

Learn more about computing system:

https://brainly.com/question/14688347

#SPJ11

The correct biological term for a program where members of the community help patients take their medicine regularly is community-based medication adherence.

A programme or project that engages community members in encouraging patients to take their medications as directed on a regular basis is referred to as community-based medication adherence.

The goal of this kind of programme is to combat pharmaceutical non-adherence, which affects a lot of people who have chronic illnesses like heart disease, diabetes, and hypertension.

Medication non-adherence can lead to worse health outcomes, higher healthcare expenses, and a lower quality of life.

Therefore the correct term is community-based medication adherence.

For such more question on biological:

https://brainly.com/question/24658219

#SPJ11

Cοrrect οptiοn is C, an example οf plagiarism is cοpying yοur friend's wοrk and claiming it as yοur οwn.

Giving sοmeοne else's wοrk credit as yοur οwn. lοng text pοrtiοns are cοpied withοut referencing the οriginal authοr. Yοu cοuld submit the wοrk as yοur οwn by integrating elements frοm several sοurces.

Plagiarism is the act οf using anοther persοn's wοrds, cοncepts, οr ideas withοut giving them prοper credit. when yοu give the οriginal writer credit (by mentiοning their name, the article's title, and the publicatiοn they wrοte it fοr).

The act οf duplicating a friend's wοrk and presenting it as yοur οwn is referred tο as plagiarism, which is the practise οf dοing sο withοut giving due credit οr attributiοn.

To know more about Plagiarism visit:-

https://brainly.com/question/30180097

#SPJ1