Which is NOT a component of a 3-point lighting system?

Answer:

Explanation:

Three-point lighting is a traditional method for illuminating a subject in a scene with light sources from three distinct positions. The three types of lights are key light, fill light, and backlight.

Key light. This is the primary and brightest light source in the three-point lighting setup. It gives a scene its overall exposure. Cinematographers typically position this main light slightly off to the side of the camera and the front of the subject, on a light stand at a 45-degree angle to the camera, which creates shadows on the opposite side of the subject’s face, giving it dimension and depth. The primary light creates the mood of a scene. Depending upon its position and the supplemental lights used in the overall lighting, it can create a high-key image (evenly, softly lit and atmospherically upbeat) or a low-key image (high contrasts, deep shadows, and very moody).

Fill light: Mirroring the key light on the opposite side of the camera, the fill light literally fills in the shadows that the key light creates on a subject, bringing out details in the darkness. Typically, this secondary light is less bright than the key, and cinematographers control the overall feel of their shots based on how much they dim or lighten the fill light. A dim fill light, where the fill ration is high, creates a high-contrast, film-noir type of shadow, while a brighter light with a lower, more balanced ratio gives the subject a more even look. The second light isn’t always a light: it can be a reflector, a bounce card, a wall, or anything that bounces back some light onto the subject to fill in the shadows. Together with the key light, the fill light determines the mood of a scene.

Backlight: The third source in this lighting technique, the backlight (also known as the “rim light” or “hair light”) shines on a subject from behind, completing the light setup. This creates a rim of light or outline around their head that pushes the subject away from the background and gives a sense of depth. Typically, cinematographers position the backlight directly behind the subject or high enough to be out of frame, opposite the key light, and pointing at the back of the subject’s neck.

Which of the following describes a characteristic of organic light-emitting diodes (OLEDs) used in clothing?

uniform

flexible

transparent

sizeable

list eight applications software​

Popular periodicals might include newspapers

True or false?

1. A bank customer invested $24 in a bank with 5 percent simple interest per year, write a program the construct a table showing how much money the bank customer would have at the end of each 20- year period starting in 2021 to 2041.

2. A programmer starts with salary of $65,000 and expect to receive $1500 raise each year. Write a program to compute and print the programmer's salary for each of the first 10 years and total amount of money the programmer would receive over the 10- year period.

pleaseeeeeeee tellllllllllllllllllllll​

How to use the RANK Function in Microsoft Excel

njvekbhjbehjrbgvkheb

Write a program second.cpp that takes in a sequence of integers, and prints the second largest number and the second smallest number. Note that in the case of repeated numbers, we really mean the second largest and smallest out of the distinct numbers (as seen in the examples below). You may only use the headers: and . Please have the output formatted exactly like the following examples: (the red is user input)

Landing pages in a foreign language should never be rated fully meets?

Choose the item which best describes the free frame list. 1. a per process data structure of available physical memory 2. a global data structure of available logical memory 3. a global data structure of available physical memory 4. a global data structure of available secondary disk space

Line 9 and 10
To calculate your taxable income, subtract the sum of lines 8
and 9 from line 7, and then enter that number here.

What is the first step you should take when you want to open a savings account? A. Present your photo ID to the bank representative. B. Go to the bank and fill out an application. C. Make your initial deposit. D. Review the different savings account options that your blunk offers.​

pleaseeeeeeee tellllllllllllllllllllll​

InfoTrac is an aggregated database?

True

False

what functions can you perform with project management software?

In Python what are the values passed into functions as input called?

it is a group of two or more computer system connect to each other​

state 4 basic operation performed by a computer​

Given positive integer n, write a for loop that outputs the even numbers from n down to 0. If n is odd, start with the next lower even number.

A pharmaceutical company is going to issue new ID codes to its employees. Each code will have three letters followed by one digit. The letters and and the digits , , , and will not be used. So, there are letters and digits that will be used. Assume that the letters can be repeated. How many employee ID codes can be generated

Code a Python program that uses a graphical user interface (GUI) to address a real-world problem. Within reason, you may choose to address any real-world problem that you would like; however, please only choose a real-world problem that is both safe and legal.

Write functions to compute a subset, find member, union, and intersection of sets. Follow the steps below:

1. Read two integers from the user.
2. Suppose one of the integers is 2311062158. The binary equivalent of this integer stored in a register will be 1000 1001 1100 0000 0000 0010 1000 1110. This data should be regarded as bit strings representing subsets of the set {1, 2, … 32}. If the bit string has a 1 in position i, then element i is included in the subset. Therefore, the string: 1000 1001 1100 0000 0000 0010 1000 1110 corresponds to the set: {2, 3, 4, 8, 10, 23, 24, 25, 28, 32}.
3. Print out members of the set from smaller to larger. You can do a loop from 1 to 32. Load a masking bit pattern that corresponded to the position number of the loop counter (0x00000001 for 1). Isolate the bit in the operand by using the AND operation. If the result of the AND is not 0 then the loop counter is in the set and should be displayed. Increment the counter and shift the masking bit pattern to the left.
4. Read a number from the user. Determine if that element is a member of the given sets.
5. Determine the union of two sets.
6. Determine the intersection of two sets.
7. Implement a loop back to the main function. See the prompts below: "Enter the first number:" "Enter the second number:" "Members of Set 1:" "Members of Set 2:" "Enter an element to find:" "It is a member/ not a member of set 1" "It is a member/ not a member of set 2" "Union of the sets:" "Intersection of the sets:" "Do you want to compute set functions again?"
8. Test the program using the following data:

Enter the first number: 99999
Enter the second number: 111445
Members of set 1: 1 2 3 4 5 8 10 11 16 17
Members of set 2: 1 3 5 7 9 10 13 14 16 17
Enter an element to find: 7
It is not a member of set 1
It is a member of set 2
Union of the sets: 1 2 3 4 5 7 8 9 10 11 13 14 16 17
Intersection of the sets: 1 3 5 10 16 17

In this lab, you use what you have learned about searching an array to find an exact match to complete a partially prewritten C program. The program uses an array that contains valid names for 10 cities in Michigan. You ask the user to enter a city name; your program then searches the array for that city name. If it is not found, the program should print a message that informs the user the city name is not found in the list of valid cities in Michigan. The file provided for this lab includes the input statements and the necessary variable declarations. You need to use a loop to examine all the items in the array and test for a match. You also need to set a flag if there is a match and then test the flag variable to determine if you should print the the Not a city in Michigan. message. Comments in the code tell you where to write your statements. You can use the previous Mail Order program as a guide. Instructions Ensure the provided code file named MichiganCities.cpp is open. Study the prewritten code to make sure you understand it. Write a loop statement that examines the names of cities stored in the array. Write code that tests for a match. Write code that, when appropriate, prints the message Not a city in Michigan.. Execute the program by clicking the Run button at the bottom of the screen. Use the following as input: Chicago Brooklyn Watervliet Acme

What allows you to navigate up down left and right in a spreadsheet?

Plzz help will mark brainliest

pleaseeeeeeee tellllllllllllllllllllll​

public class Square extends Shape{
/**Like with Shape, we will be making a static instance variable
* to keep track of how many squares we have made. It is very
* similar to the one in shape, and it's uses are similar as well.
* It too is initialized to zero.
*
* We may also need additional instance variables, which you should
* declare as needed. They will not need to be static nor initialized
* here though.
**/
/**You may need additional instance variables. Declare them here.
**/
/**The constructor for Square is a little more involved than the
* Shape constructor, as it takes a single double parameter representing
* the side length. It should also call the super constructor, as
* calling it increments the number of shapes made, which we should
* do (as a Square extends Shape). We also need to increment the
* instance variable representing the number of squares made, and handle
* our parameter appropriately.
**/
public Square(double sideLength){
}
/**Like with our other shapes, this is a simple getter method for our
* static instance variable.
**/ public static int getNumSquaresMade(){
return -1;
}
/**As always, we must override getSize() for our Square. A Square's size
* is simply it's side length squared.
**/
}
public class Shape{
private static int numShapesMade = 0;
public Shape(){
numShapesMade++;
}
public static int getNumShapesMade(){
return numShapesMade;
}
public double getSize(){
return 0;
}
}

Type the correct answer in the box. Spell all words correctly.
In a content file, Rick wants to add information that gives directions about how the content will be used. He also wants it to be easily differentiable from the content. Which language should Rick use for this?
Rick can use the _____
language to give directions about the content.

state two ways of moving an icon from one location to another​

Which of the following are examples of nontoxic materials used in computer equipment?
gold, silver, copper
arsenic, copper, gold
dioxin, silver, gold
copper, silver, lead