Which is an example of a compound? * He3 or H2O or C

The frequency of photon=6.03 x 10³³ /s

Radiation energy is absorbed by photons

The energy in one photon can be formulated as

[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]

Where

h = Planck's constant (6,626.10⁻³⁴ Js)

f = Frequency of electromagnetic waves

Energy of photon = 4 J

So the frequency :

[tex]\tt f=\dfrac{E}{h}\\\\f=\dfrac{4}{6.626.10^{-34}}\\\\f=6.03.10^{33}/s[/tex]

Answer:

B

Explanation:

living things are not required to move

Answer:

A) 0.801

Explanation:

The reaction that takes place is:

First we calculate the H₂SO₄ moles that reacted:

Now we convert H₂SO₄ moles to NaOH moles:

Finally we calculate the molarity of the NaOH solution:

So the answer is option A.

The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.

The neutralization reaction has resulted in the formation of the salt and water on reacting an acid with a base. In the neutralization reaction, the strength of acid and base can be given as:

[tex]\rm 2\;NaOH\;+\;H_2SO_4\;\rightarrow\;Na_2SO_4\;+\;H_2O[/tex]

For the neutralization of 1 mole of sulfuric acid, 2 moles of NaOH has been required.

The moles of sulfuric acid can be given as:

Moles = Molarity × Volume

Given, the molarity of acid ([tex]\rm H_2SO_4[/tex]) = 0.355 M

Volume of acid = 28.2 ml = 0.0282 L

Volume of base (NaOH) = 25 ml = 0.025 L

Moles of [tex]\rm H_2SO_4[/tex] = 0.355 × 0.0282 mol

Moles of [tex]\rm H_2SO_4[/tex] = 10.011  mol.

Since, 1 mole [tex]\rm H_2SO_4[/tex] = 2 moles NaOH

10.011 moles [tex]\rm H_2SO_4[/tex] = 10.011 × 2 moles NaOH

10.011 moles [tex]\rm H_2SO_4[/tex] = 20.022 moles NaOH.

The neutralization of 0.355 M [tex]\rm H_2SO_4[/tex] requires 20.022 moles NaOH. The strength of the NaOH solution will be:

Molarity = [tex]\rm \dfrac{Moles}{Volume\;(L)}[/tex]

Molarity of NaOH = [tex]\rm \dfrac{20.022}{0.025}[/tex]

Molarity of NaOH = 0.801 [tex]\rm \times\;10^-^3[/tex] M.

The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.

For more information about the neutralization reaction, refer to the link:

https://brainly.com/question/4612545

Answer:

5.61 e⁻³

Explanation:

Given that:

The barrier length = 0.681 nm = 6.81 × 10⁻¹⁰

The difference between the height of the barrier & the energy of the electron is;

[tex]V - E = 0.554 \ eV (1.6 \times 10^{-19} )[/tex]

= 8.864 × 10⁻²⁰ V

where;

m = 9.1 × 10⁻³¹ kg

The probability[tex]P = e^{-2 \ kd}[/tex]

[tex]k = 2 \pi \sqrt{\dfrac{2m (V-E)}{h^2} }[/tex]

[tex]k = 2 \pi \times \dfrac{\sqrt{2 \times 9.1 \times 10^{-31} \times 8.864 \times 10^{-20}}}{6.63 \times 10^{-34}}[/tex]

k = 3.806 × 10⁹

[tex]P = e^{-2 \ kd}[/tex]

[tex]P = e^{2 \times 3.806 \times 10^9 \times 6.81 \times 10^{-10}}[/tex]

P = 0.005606

P = 5.61 × 10⁻³

P = 5.61 e⁻³

The density of metal = 4.5 g/ml, and the metal = Titanium

Density is a quantity derived from the mass and volume  

Density is the ratio of mass per unit volume  

Density formula:  

[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]

ρ = density  

m = mass  

v = volume  

mass of metal=27 g

volume = 6 ml

The density :

[tex]\tt \rho=\dfrac{27}{6}\\\\\rho=4.5~g/ml[/tex]

The metal with a density of 4.5 g/ml is Titanium

Answer: the reliability will be worse

Explanation:

Suppose we used 0.5 M NaOH to titrate our vinegar sample instead of 0.1 M.

Now by using 0.5M instead of 0.1M we are increasing the concentration of NaOH,

We know that  the moles used = Volume x concnetration.

so for the same no of moles, if the concentration increases, the volume decreases.

Hence it will consume less NaOH.

now Since the volume decreases, the titration volume of less number will increase the % error.

Therefore the reliability will be worse.      

The effect that the concentration of the added base has on the reliability of the results of the titration in question is; The reliability will be worse.

We are told that;

0.5 M NaOH is to be used to titrate a vinegar sample instead of 0.1 M.

Now, 0.5 M means a concentration of 0.5 and since it is higher than 0.1M, it means the concentration of NaOH will increase.

Formula for number of moles used is;

n = V × M

Where;

n is number of moles

V is volume

M is concentration

We can see that number of moles is directly proportional to the volume and concentration.

Thus, if the number of moles remains unchanged, as we have increased the concentration, it means that the volume will decrease.

Thus, lesser volume of NaOH will be used and as a result of this decrease in volume, there will be a greater possibility of error.

In conclusion, we can say that the reliability will be worse.

Read more at;https://brainly.com/question/22702792

Answer: D

Explanation: I guessed it and got it right

A fundamental object that is difficult to divide into smaller bits is known as an element. Therefore option D is correct.

An element is a species of atoms, including the pure material made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical process into simpler molecules.

An element is a material that cannot be broken down by non-nuclear processes in chemistry and physics. A discrete component of a larger system or collection is referred to as an element in computers and mathematics.

Metals, nonmetals, and metalloids are the Periodic Table's three main groupings. Each group's constituent elements share comparable physical and chemical characteristics. Among the physical characteristics used to separate the three groups are, A substance's capacity to reflect light is referred to as luster.

Thus, option D is correct.

To learn more about element follow the link below;

https://brainly.com/question/13025901

#SPJ2

Answer:

255.732 g/mol

Explanation:

Molar mass of Ga(NO3)3 = 255.7322 g/mol. This compound is also known as Gallium(III) Nitrate.

Answer:

Beta particles

Explanation:

A beta emission is said to occur when a neutron is converted into a proton. When a beta emission takes place, the daughter nucleus increases it's atomic number by 1. A neutrino is also produced.

Since the mass number remain the same but the daughter nucleus has it's atomic number increased by 1, then the particle is a beta particle.

Answer:

that one or more new substances are produced. Temperature Changes Chemical reactions can release energy or absorb energy.

Explanation:       .

Answer:uclear Force that holds together the nucleus of an atom. electromagnetic force. ... They are unstable because the Strong Force that would hold them together if the protons and neutrons were closer is weakened because the protons and neutrons get too far apart.

Explanation:

Answer:   i think it is binary fission

Explanation:

The formula of Silver (III) Sulfide is Ag2S3.

Hope this helps. Please mark brainliest!

Answer:

The Reaction of acetic acid withNaN3 gives out methylamine. rxn of methylamine to HNO2 to give out methanol. oxidation of methanol via Kcr207(H+) to give formic acid.

Answer:

1.43 × 10²⁴ atoms Kr

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

2.37 mol Kr

Step 2: Convert

[tex]2.37 \ mol \ Kr(\frac{6.022 \cdot 10^{23} \ atoms \ Kr}{1 \ mol \ Kr} )[/tex] = 1.42721 × 10²⁴ atoms Kr

Step 3: Check

We are given 3 sig figs. Follow sig fig rules and round.

1.42721 × 10²⁴ atoms Kr ≈ 1.43 × 10²⁴ atoms Kr

Answer:

A. since Nitrogen has 7 electrons and when it gains 3 electrons it will have 10 electrons. using short hand rule it is [Ne]

Answer:

212 degrees Fahrenheit

Explanation:

When liquid water reaches a low enough temperature, it freezes and becomes a solid—ice. When solid water is exposed to enough heat, it will melt and return to a liquid. As that liquid water is further heated, it evaporates and becomes a gas—water vapor.

Answer:

The ability of an atom to accept an electron.

Explanation:

Electron affinity is measured by observing the energy change of a substance when an electron is added to it in its neutral gas form. For example, elements that are on the far right of the periodic table (excluding noble gases) are more likely to accept electrons rather than give them up. This is why Fluorine has the highest electron affinity of all atoms on the periodic table.

Answer:

Heat the molecule

Explanation:

Since most bonds require energy to form, they also give off energy when they are broken. But before most bonds break, the molecule has to be heated. Then the atoms start to move, and when they move too much, the bond breaks. Molecules that require less energy to break than they give off when broken are called fuels.

Answer:

What's the rest of the question

Explanation:

Answer:

Kush would have been able to fight better and probably would have never been invaded by Egypt, and they could have beaten the Assyrians when they tried to takeover Egypt. And the 25th dynasty would have continued.

Explanation:

that is my explanation and answer^

Answer:

87.5 %

Explanation:

Step 1: Given data

Step 2: Calculate the percent yield

When working with chemical reactions, we can determine the efficience in obtaining a product measuring the percent yield. The theoretical yield is the maximum amount of product that we could obtain according to the stoichiometry, whereas the real yield is the amount of product that we actually obtain when we carry out the process. We can calculate the percent yield usign the following expression.

%yield = real yield / theoretical yield × 100%

%yield = 105 kg / 120 kg × 100%

%yield = 87.5 %

Answer:

The boiling point of gallium would be most similar to aluminum, and the boiling point of oxygen would be least similar to aluminum.

Explanation:

The atomic number of aluminum is 13, in the periodic table, magnesium lies in a similar period as Aluminum and Gallium is also present in a similar group. Thus, it can be expected that both magnesium and gallium exhibits similar boiling points with aluminum. However, gallium is a poor non-metal just like aluminum, while magnesium is a metal. Thus, it can be said that the boiling point of aluminum is more similar to gallium.

Now of the given elements, oxygen is a gas, thus, the boiling point of oxygen would be least similar to aluminum.

Explanation:

Because of this, DNA and RNA can easily dissolve in water. ... Adding ethanol helps the Na+ and PO3- ions come together, because ions travel easier in ethanol than water. The supernate is removed and new ethanol is added in the second washing. This removes any residual salt that remained on the pelleted DNA.

Answer:

DNA is polar due to its highly charged phosphate backbone. Its polarity makes it water-soluble (water is polar) according to the principle "like dissolves like". ... This fact makes water a very good solvent for charged compounds like salts.

Your DNA's sugar phosphate backbone is charged. By adding salt, we help neutralize the DNA charge and make the molecule less hydrophilic, meaning it becomes less soluble in water. The salt also helps to remove proteins that are bound to the DNA and to keep the proteins dissolved in the water.

It is well known that Ethanol has a lower dielectric constant than water, making it to promote ionic bond formations between the Na+ (from the salt) and the PO3- (from the DNA backbone), further, causing the DNA to precipitate.

Explanation:

Ideally DNA needs to be precipitated with pellet and should not remain in supernatant. DNA is acidic in nature and therefore, needs optimum salt concentration in the buffer to be pelleted from a solution. At very low salt concentration or without salt DNA would remain in supernatant.

Answer:

YOURE AMAZING THANK YOU THANK YOU THANK YOU

Explanation:

Answer:

Adding or removing energy from matter causes a physical change as matter moves from one state to another. For example, adding thermal energy (heat) to liquid water causes it to become steam or vapor (a gas). And removing energy from liquid water causes it to become ice (a solid). ... Most liquids contract as they freeze.

Explanation:

have a nice day

Answer:

0.54 mole of H2O.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2CH3OH + 3O2 —> 2CO2 + 4H2O

From the balanced equation above,

2 moles of CH3OH reacted to produce 4 moles of water.

Finally, we shall determine the number of mole of water (H2O) produced by the reaction of 0.27 moles of CH3OH. This can be obtained as follow:

From the balanced equation above,

2 moles of CH3OH reacted to produce 4 moles of water.

Therefore, 0.27 moles of CH3OH will react to produce = (0.27 × 4)/2 = 0.54 mole of H2O.

Thus, 0.54 mole of H2O is produced from the reaction.

Answer:

The oxidation state of a free element (uncombined element) is zero. For a simple (monoatomic) ion, the oxidation state is equal to the net charge on the ion. For example, Cl– has an oxidation state of -1. When present in most compounds, hydrogen has an oxidation state of +1 and oxygen an oxidation state of -2