which features do sound waves have that ocean waves do not?Check that all apply.

The diagram that represents the position of a ball, at equal time intervals, as it falls freely is diagram B.

The acceleration of an item in free fall is -9.8 m/s/s. (The minus symbol represents a downward acceleration.) For any freely falling item, the acceleration in the kinematic equations is -9.8 m/s/s, whether or not this is explicitly stated.

vf = g x t where g is the acceleration of gravity. The value for g on Earth is 9.8 m/s/s. This formula is used to determine the object's speed after being dropped from rest for any period of time.

Therefore, the correct option is B. diagram B.

To learn more about free fall kinematics, refer to the link:

https://brainly.com/question/29123872

#SPJ1

The question is incomplete. Your most probably complete question is given below:  the options are attached below.

The wavelength of the standing wave will be 1.2 m if a cable is stretched between two posts 3.00 m apart. the speed of waves on this cable is 96.0 m/s, and the tension in the cable is 175 n. if a standing wave on this cable has five antinodes.

Length, l = 2 m

speed of waves, v = 96 m

Tension, T = 175 N

Antinodes, n = 5 means 5th harmonic

We know that,

l = nλ/2

or λ = 2l/n = 2x3/5 = 1.2 m

Therefore, the wavelength of the standing wave will be 1.2 m if a cable is stretched between two posts 3.00 m apart. the speed of waves on this cable is 96.0 m/s, and the tension in the cable is 175 n. if a standing wave on this cable has five antinodes.

To learn more about antinodes:

https://brainly.com/question/11735759

#SPJ4

Answer:

net force=applied force

Explanation:

...........................................

The maximum acceleration that the flatbed truck can achive on wet concrete is 5[tex]m/s^{2}[/tex]

The maximum acceleration a truck can achieve on wet concrete is determined by the coefficient of friction between the two drive wheels and the surface.

Taking into account the coefficients of static and kinetic friction between the drive wheels and a wet concrete surface—0.7 and 0.5, respectively—the maximum acceleration of a truck with half its weight supported by its two drive wheels can be calculated using Newton's Second Law of Motion.

According to Newton's Second Law, F = ma, where F is force, m is mass and a is acceleration.

Since the truck has half its weight supported by its two drive wheels, we know that F = 0.5 mg (where m is mass and g is gravitational acceleration). Thus, when solving for a (acceleration), we have:

a = F/m

 = 0.5mg/m

 = 0.5g

 = 4.9 [tex]m/s^{2}[/tex] ≈ 5 [tex]m/s^{2}[/tex]

This means that on wet concrete with coefficients of static friction and kinetic friction at 0.7 and 0.5 respectively, the maximum acceleration a truck with half its weight supported by its two driving wheels can achieve is 5 [tex]m/s^{2}[/tex].

To learn more about acceleration, click here:

https://brainly.com/question/12550364

#SPJ4

Answer: plants have internal and external structures that support growth and reproduction Examples of internal structures are the xylem and phloem Examples of external structures are the roots and stems. All of these structures provide plants with nutrients and food

Explanation: BRAIN

A large air mass moving over flat land from a desert to an ocean is a true statement.

The temperature, humidity, and pressure of the air mass, as well as the temperature, humidity, and pressure of the water beneath it, are the data

Scientists need to know to assist them to estimate the possibility of precipitation as the air mass travels closer to the ocean.

Being a warm front, the precipitation is expected to contain a few scattered clouds. This is due to the fact that the air mass of the desert is passing over an ocean, which implies that a heated, dry air mass is passing over a cold air mass.

Therefore, it is a true statement.

Learn more about the ocean, here:

https://brainly.com/question/13800573

#SPJ1

A magnetic field is a field that explains how magnetism affects an item in space.

To learn more about magnetic field refer

https://brainly.com/question/26257705

#SPJ4

Answer:

lab report is attached

Explanation:

The magnitude of the force that each sphere before contact and after contact are 1.438 × 10¹⁶ N and 3.5 × 10¹⁴ N respectively.

"Coulomb's law states that the force of attraction or repulsion between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them." It runs on the same track as the two charges, which are thought of as point charges.

Q₁ = -20 C

Q₂ = +50 C

Distance d = 2.5 cm equals 0.025 metres

F = (k Q₁ Q₂)/d² = (8.99 × 10⁹ × 20×50) /(0.025)² = 1.438×10¹⁶ N

Given that, the charges have opposing signs, the force is alluring.

The charge on each sphere after contact,

Q = Q₁ + Q₂/2 = -20+ 50/2 = -20 + 25 = 5 C

Magnitude of force = k Q²/d² = (8.99× 10⁹ × 5²)/(0.025)² = 224.75× 10⁹/(0.000625) = 359600× 10⁹ = 3.5 × 10¹⁴ N

To know more about force:

https://brainly.com/question/30324680

#SPJ4

The distance between the balloon and the rock can be found by using Pythagorean theorem: d = 198 .2 m

The motion of the stone is the motion of a projectile, thrown with a horizontal speed of

vx = 15 .0 m/s

and with an initial vertical velocity of

= 20.0 m/s

where we have put a negative sign to indicate that the direction is downward.

h is the initial height

g = -9.81 m/s^2 is the acceleration due to gravity

The stone hits the ground after a time t = 6.00 s, so at this time the vertical position is zero:

y(6.00 s) = 0

Substituting into eq.(1), we can solve to find the initial height of the stone, h: = 296 .m

(b) 176.6 m

The balloon is moving downward with a constant vertical speed of

v x = -20.0 m/s

and substituting t = 6.0 s and h = 296.6 m, we find the height of the balloon when the rock hits the ground:

y(t) = 176.6 m

(c) 198.2 m

In order to find how far is the rock from the balloon when it hits the ground, we need to find the horizontal distance covered by the rock during the time of the fall.

The horizontal speed of the rock is

v x = 15.0 m/s

So the horizontal distance travelled in t = 6.00 s is

d x = 90 m

Considering also that the vertical height of the balloon after t=6.00 s is

d y = 176.6 m

The distance between the balloon and the rock can be found by using Pythagorean theorem:

d = 198 .2 m

To learn more about Pythagorean theorem refer

https://brainly.com/question/343682

#SPJ4

613.25 N is the weight of water will be displaced by a 50 kg floating oak beam, if oak is 0.8 times dense of water.

Density of water, = 1000 kg/m³

Density of oak, = 0.8 × 1000 = 800 kg/m³

Floating of an object is possible if the upward force exerted by the water is equal to the weight of the object. And this upward force is equal to the weight of water displaced by the floating object.

Volume of the water displaced by the 50 kg oak, V = 50/800 = 0.0625 m³

Mass of the displaced water = 0.0625 × 1000 = 62.5 kg

Weight of the displaced water = 62.5 × 9.81 = 613.13 N.

To know more about Density, here

https://brainly.com/question/29775886

#SPJ4

The accelaration of the boat, given the speed of the boat and the time taken to reach the speed, is 0.2 m / s².

Acceleration can be found by dividing the change in the speed of an object by the time it takes.

The change in speed is:

= 8 m / s - 2 m / s

= 6 m /s

The change in time is:

= 1 / 2 x 60 seconds per minute

= 30 seconds

The acceleration is:

= 6 / 30

= 0.2 m / s²

Find out more on acceleration at https://brainly.com/question/26246639

#SPJ1

Answer:

0.2

Explanation:

Acceleration = change in velocity / time = (8 m/s – 2 m/s) / 30s = 0.2 m/s2

The fox which is fleeing from a hunter encounters a 0.745 m tall fence and this fox can clear the fence with a height of up to 0.895 meters.

Velocity can be defined as the rate of change in the displacement of an object. It is a vector quantity as it has both the magnitude and direction. The change in velocity of an object is known as acceleration.

Given,

Initial velocity (u) = 7.50 m/s

Launch angle, θ = 45°

Height of fence = 0.745 m

Trajectory of Projectile is given by:

y = x tanθ - gx²/ 2u²cos²θ

For x = 1.99 m  

y = 1.99 × tan 45° - 9.8 × (1.99)²/ 2 × (7.5)² × (cos45°)²  

y = 1.99 × 1 - 9.8 × 3.96/ 2 × 56.25 × (1)²

y = 1.99 - 38.80/112.5

y = 1.99 - 0.345

y = 1.64m

At x = 1.99 m, the value of y = 1.64 m

Therefore, fox clear fence by a margin = 1.64 - 0.745 = 0.895 meters.

Learn more about Velocity here:

https://brainly.com/question/18084516

#SPJ1

The amount of the charge flowing through the terminals of the battery is found to be 0.084C.

The voltage of the battery is given to be 12 V and the capacitance of the capacitor is given to be 7 micro F.

As per the standard relations, the amount of the charge flowing through the terminal of the battery will be given by,

Q = CV

Where,

Q is the charge through the battery,

C is the capacitance of the capacitor,

V is the voltage of the battery.

Putting all the values,

Q = 12 x 7/1000

Q = 0.084 C.

So, the charge flowing is 0.084 C.

To know more about Capacitance, visit,

https://brainly.com/question/27393410

#SPJ4

If it starts from rest can travel 1000m, in a straight path, and again it has to come to rest at the end of  1000m, then minimum 70s will be taken.

According to the question, the car starts off at a stop, travels up to a top speed of 20 m/s, and then comes to a stop. This implies that the vehicle must have first reached its maximum speed before braking to a stop.

Let, [tex]T_1[/tex] and [tex]T_2[/tex] be the time for acceleration (attaining maximum velocity) and deceleration (come to the rest) respectively.

Then,

[tex]T_1[/tex] = (Maximum velocity - initial velocity) / acceleration

⇒ [tex]T_1=\frac{20-0}{1}=20sec[/tex]

Then, distance travelled in time [tex]T_1[/tex],

⇒ [tex]S_1=UT_1+\frac{1}{2}aT_1^2[/tex]

⇒ [tex]S_1=0+\frac{1}{2}*1*20^{2}[/tex]

⇒ [tex]S_1= 200m[/tex]

Similarly,

⇒ [tex]T_2=\frac{0-20}{-1}=20sec[/tex]

⇒ [tex]S_2=UT_2+\frac{1}{2}aT_ 2^2[/tex]

⇒ [tex]S_2=(20*20)-(\frac{1}{2}*1*20^2)[/tex]

⇒ [tex]S_2=400-200=200m[/tex]

∴ Distance travelled at uniform velocity is

⇒ [tex]S = 1000-(S_1+S_2)[/tex]

⇒ [tex]S=1000-(200+200)=1000-400=600m[/tex]

This 600m is travelled at a speed of 20m/s.

and time of travel for constant velocity is

⇒ [tex]T_3=\frac{S}{V}[/tex]

⇒ [tex]T_3=\frac{600}{20}=30sec[/tex]

Hence, total time for travel

⇒ [tex]T=T_1+T_2+T_3=(20+20+30)sec=70sec[/tex]

On a V-T graph, it can be displayed here(See picture).

To know more about acceleration

brainly.com/question/12550364

#SPJ4

Frequency and wavelength​ is 100m/s.

Pictures for Calculate the frequency and wavelength. The formula for frequency expressed in terms of time is given as follows: f = 1/T, where T is the duration of a cycle expressed in seconds and f is the frequency expressed in hertz. The frequency formula is stated as f = / where denotes the wave speed and the wavelength of the wave.

Explanation:

In 3 seconds, the source is generating 15 waves.

In a second, there are 15/3 waves, or 5 waves, produced.

Thus, the frequency is 5 Hz.

assuming that the wave length /2 = 10 cm

so that =20 cm

speed = frequency *wavelength v=5*20

v=100m/s.

To learn more about Frequency refer to:

https://brainly.com/question/254161

#SPJ1

The number of excess electrons in each sphere is equal to 1.24 x 10^-19 C / 1.6 x 10^-19 C/electron = 0.78 x 10^19 electrons.

The number of extra electrons in each sphere can be calculated using Coulomb's law. Coulomb's law states that the repulsive force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.

F = k * (q1 * q2) / d^2

where F is the repulsive force, q1 and q2 are the charges on the two spheres, d is the distance between the spheres, and k is the Coulomb constant (8.99 x 10^9 Nm^2/C^2).

Since the repulsive force is 4.57 x 10-21 N and the distance between the spheres is 20 cm = 0.2 m, we can rearrange the equations to find the charge on each sphere.

q1 = sqrt(F * d^2 / k)

q1 = square root (4.57 x 10-21 N * (0.2 m)^2 / (8.99 x 10^9 Nm^2/C^2)) = 1.24 x 10^-19 C

So the number of extra electrons in each sphere is equal to 1.24 x 10^-19 C / 1.6 x 10^-19 C/electron = 0.78 x 10^19 electrons.

To know more about coulomb's law visit:

https://brainly.com/question/506926

#SPJ4

The speed of the car truck combination is calculated to be 0.667 m/s and it is a type of inelastic collision.

Mass of the car m₁ = 700 kg

Velocity of the car u₁ = 20 m/s

Mass of the stationary truck m₂ = 1400 kg

Velocity of the stationary truck u₂ = 0

The momentum before collision is, m₁ u₁ = 700× 20 = 1400 kg m/s

As, we know from the principle of conservation of linear momentum,

momentum before the collision of trucks is equal to momentum after the collision of trucks.

The momentum after the collision is (m₁ + m₂) vf = 1400 kg m/s

(700 + 1400) vf = 1400

2100 vf = 1400

vf = 0.667 m/s

Now, let us compare kinetic energies before and after collision.

Kinetic energy before collision = 1/2 m₁ u₁² = 1/2 × 700× 20² = 14×10⁴ kg m/s

Kinetic energy after collision =1/2 (m₁+m₂) vf₂ = 1/2(700 + 1400) 0.667² = 467.13 kg m/s

As kinetic energy is not conserved, the type of collision is said to be an inelastic collision.

To know more about collisions:

https://brainly.com/question/16175398

#SPJ4

The acceleration and force of the block is 4 m/s² and 2 N respectively.

Acceleration is a measure of the change in an object's velocity over time. It is defined as the rate at which an object changes its velocity, either in speed or direction. Mathematically, acceleration is calculated as the change in velocity (delta v) divided by the change in time (delta t): a = Δv / Δt. In other words, it is the rate of change of velocity. Acceleration has units of meters per second squared (m/s^2) in the International System of Units (SI).

The acceleration of the block can be calculated using the formula:

a = Δv / t, where Δv is the change in velocity and t is the time interval.

Since the block starts from rest, its initial velocity is 0 m/s, and its final velocity can be calculated as v = a × t = 8 m/s.

So, a = [tex]\frac{v}{t}[/tex] = [tex]\frac{8m/s}{2s}[/tex] = 4 m/s².

The value of F can be calculated using Newton's second law, which states that the net force on an object is equal to its mass times acceleration:

F = ma = 500 g × 4 m/s² = 2 N.

To know more about force visit:

https://brainly.com/question/28875770

#SPJ4

To determine the charge, we can use the equation for the electric field due to a point charge:

E = k * q / r^2

Where E is the electric field, k is the Coulomb constant (8.98755 x 10^9 Nm^2/C^2), q is the charge, and r is the distance from the point charge.

We can rearrange this equation to solve for q:

q = E * r^2 / k

Plugging in the given values:

q = (68.3 N/C) * (28.8 m)^2 / (8.98755 x 10^9 Nm^2/C^2)

q = (68.3 N/C) * (826.24 m^2) / (8.98755 x 10^9 Nm^2/C^2)

q = (68.3 N/C) * (826.24 m^2/C^2)

q = (68.3 N/C) * (826.24 / 8.98755 x 10^9) C

q = (68.3 N/C) * (9.26 x 10^-9) C

q = 6.36 x 10^-7 C

The charge is approximately 6.36 x 10^-7 Coulombs.

Delivery method for their speech is True.

The context of the speaking event can greatly affect the audience's expectations for the delivery of a speech. For example, in a formal setting such as a business conference, the audience may expect a more professional and formal delivery, with the use of slides or visual aids and a well-structured speech. In contrast, at a casual event such as a family gathering, the audience may expect a more relaxed and conversational delivery, with less emphasis on visual aids and a more informal structure. Additionally, the topic of the speech, the background of the audience and the purpose of the speech can also affect the audience's expectations. Therefore, a speaker should be aware of the context of the event, and adjust their delivery method accordingly.

To know more about Speech visit: https://brainly.com/question/29586134

#SPJ4

Lighting uses typically range from 2 to 100 watts (W), depending on size and kind.

To learn more about electricity refer to:

https://brainly.com/question/776932

#SPJ4

The correct option is (b) i.e. optical system. It is made up of a laser, optical filters, light-collecting optics, and beam-shaping components.

A scanner assembly, as it relates to digital imaging and document scanning, typically consists of a laser, optical filters, light-collecting optics, and beam-shaping devices. The laser is used to project a precise, concentrated beam of light onto the surface of the plate or document being scanned. Optical filters are used to control the wavelength and intensity of the light being used. Light-collecting optics, such as lenses, are used to focus the beam of light onto the plate or document. Finally, beam-shaping devices, such as mirrors or prisms, are used to guide the beam of light as it scans across the plate or document. The scanner assembly is designed to move the beam of light back and forth across the plate in a controlled manner, capturing an image of the plate or document as it does so.

To know more about optics please refer: https://brainly.com/question/260737

#SPJ4

Question - The part of the reader that consists of a laser, optical filters, light-collecting optics, and beam-shaping devices that is designed to project and guide a precisely controlled laser beam back and forth across the plate as the plate moves through the scan area is the

a) photodetector

b) optical system

c) drive mechanism

d) photostimulable luminescence

Average vehicle spacing at higher traffic density is 35.4 m for a vehicle with a length of 4.7 m.

Let's assume that Traffic flows at 96 km/h as per international data.

We need to find average vehicle spacing.

It indicates that a 96 km stretch of traffic gets cleared in one hour. In addition, 2400 cars may be supported in one lane for an hour. It implies that at least 96km must be taken up by 2400 automobiles. Congestion results from more vehicles moving at the same speed but occupying a smaller space as the number of automobiles increases.

Here, the key to the issue is that you must just consider length. 96 kilometres equal 96,000 metres at this time. If 2400 automobiles take up this much space [just lengthwise], 1 car will take up 96000/2400 m. it is 40 metres. Therefore, each automobile may use up 40m. But the automobile is 4.2 metres long.

It can thus also have a free space of 40 - 4.6 = 35.4 m.

Learn more about Average spacing here:

https://brainly.com/question/15557089

#SPJ4

(a) The maximum possible acceleration of a car moving down this stretch of track is 2.38 m/s².

(b) The final speed of the car is 8.6 m/s.

The coefficient of friction acting on the inclined surface is calculated by applying the following formula.

μ = tanθ

where;

μ = tanθ

μ = tan (14)

μ = 0.25

The maximum possible acceleration of a car moving down this stretch of track is calculated as follows;

ma = μmg cosθ

a = μg cosθ

a = ( 0.25 x 9.8 m/s² ) x cos (14)

a = 2.38 m/s²

The final speed of the car when accelerating at maximum acceleration is calculated as follows;

s = distance travelled by the car = length of the incline

s = ( 1 m / 3.28 ft )  x ( 51 ft ) = 15.55 m

v² = u² + 2as

where;

v² = 0 + 2as

v² = 2as

v = √ ( 2as )

v = √ ( 2 x 2.38 x 15.55 )

v = 8.6 m/s

Learn more about final speed here: https://brainly.com/question/25905661

#SPJ1

The magnitude of charge q3 is 3*10^4 N/C and it has a positive sign.

To find the magnitude and sign of the additional charge q3 needed to make the total electric field at point A equal to zero, we can use the principle of superposition of electric fields. This principle states that the total electric field at any point in space is the vector sum of the electric fields due to each individual charge.

We can start by calculating the electric field due to each of the two point charges q1 and q2 at point A, which is located at the origin. The electric field due to a point charge q at a distance r from it is given by the equation:

E = k*q/r^2

Where k is the Coulomb constant and q is the charge.

For q1, the electric field at point A is:

E1 = kq1/(16m)^2 = 910^9 * 810^-9 / 256 = 310^4 N/C

For q2, the electric field at point A is:

E2 = kq2/(9m)^2 = 910^9 * 610^-9 / 81 = 610^4 N/C

Since q2 is on the negative x-axis, the electric field is pointing in the negative x direction.

Now we can calculate the total electric field at point A by adding these two fields vectorially.

E = E1 + E2 = 310^4 N/C - 610^4 N/C = -3*10^4 N/C

The total electric field at point A is pointing in the negative x direction.

To make the total electric field equal to zero, we need to add an additional charge q3 at point B that has the same magnitude as the total electric field but pointing in the opposite direction. The magnitude of q3 is -3*10^4 N/C, and since it is pointing in the positive x-direction, the sign of q3 is positive.

So, the magnitude of q3 is 3*10^4 N/C and it has a positive sign.

Learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

angle to the shore should a person navigate a boat, which is maintaining a constant speed of 16 km/h, in order to reach a point directly opposite is 75.5 degrees.

Since the stream is flowing parallel alongside the shore, it takes the vector form of  v {stream} = [0,4]

the boat velocity is perpendicular to the stream, it's takes the vector form of  v{boat} = [-16,0]

The resultant velocity of the boat is the sum of the velocity of the boat and stream, thus it takes the form

v{total} =  [-16,0] +  [0,4]

           = [ -16,4]

the cosine of angle to the shore,

                  cos {theta} = v{total} . v {stream} / ||v{total} || x ||v {stream}||

                                     =  [ -16,4] . [0,4] / (16x4)

                                     = 16/64

                                     = 0.25

                       angle = 75.7 degrees.

Learn more about the Angle here :

https://brainly.com/question/28451077

#SPJ4

The maximum mass of a polar bear can sit on the floor before sinking is 3075 kg.

The mass of an object is constant and does not change with location, unlike weight which does change depending on the gravitational pull of the planet.

Mass can be determined by measuring the gravitational force on an object using a device called a balance or scale. The International System of Units (SI) unit of mass is the kilogram (kg)

The maximum mass of a polar bear that can sit on the ice floe before it sinks is determined by the buoyancy force. The buoyancy force is equal to the weight of the water that the ice floe displaces, which is equal to the volume of the ice floe multiplied by the density of seawater.

The volume of the ice floe is 3m2 * 1m = 3 m3.

The buoyancy force is 3m3 * 1025 kg/m3 = 3075 kg.

The mass of the polar bear that can sit on the ice floe before it sinks is equal to the buoyancy force. So the maximum mass of a polar bear that can sit on the ice floe before sinking is 3075 kg.

To know more about buoyancy force visit:

https://brainly.com/question/13267336

#SPJ4

According to its definition, the net force is the total of all the forces operating on an object.So, 108.46 N force is exerted on the ball.

According to its definition, the net force is the total of all the forces operating on an object.

Mass can be propelled forward by net force.In motion or at rest, another force exerts its influence on the body.When a system contains a sizable number of forces, the term "net force" is employed.

It is given that,

Initial velocity of the baseball, u = 0

The baseball's final speed was 97 mph, or 43.36 m/s.

Mass of baseball, m = 0.15 kg

Distance, s = 1.3 m

(a) Let a be the acceleration of the baseball. Use third equation of motion as :

a = 43.36 /2*1.3

a = 723.11 m/s

Force is given by :

F = m a

F = 0.15 * 723.11= 108.46 N

So, 108.46 N force is exerted on the ball.

(b) The pitcher would need to increase the force so as to alter the required force to reach the same speed if the mass of the ball is decreased.

To learn more about N force refer

https://brainly.com/question/13014972

#SPJ4

Answer:

they eat what is decomposing speeding up the decomposition

In this physics demonstration, the ball that is dropped vertically and the one that is launched horizontally will both make contact with the ground at distinct times. The ball that falls vertically will first hit the ground.

This is because the force of gravity acts downward on both balls, causing them to accelerate toward the ground. However, the horizontally launched ball experiences the launch force as well, giving it an initial horizontal velocity. The ball's rate of descent to the ground is slowed by this horizontal velocity, resulting in a longer time spent on the ground.

On the other hand, the vertically dropped ball only experiences the force of gravity because it has no initial horizontal velocity. This indicates that it descends straight down at a steady rate and reaches the ground earlier than the horizontally launched ball.

The rate at which an object's position changes over time is measured by its velocity. It has magnitude and direction because it is a vector quantity. Meters per second (m/s) is the International System of Units (SI) standard for measuring velocity.

Mathematically, velocity can be represented as:

v = x/t, where x is the object's change in position (or displacement), t is the change in time, and v is the velocity.

To know more about displacement :

brainly.com/question/11934397

#SPJ4