.Which factor best explains the location of Microsoft, which has been located in Redmond, Washington since 1975, near founder Bill Gate's birthplace, despite the fact that most tech firms are clustered in the San Francisco Bay area? Oa. threshold and range b) political regulation Oc. labor costs Od. transport costs e) inertia

Answers

Answer 1

The factor that best explains the location of Microsoft in Redmond, Washington, near founder Bill Gates's birthplace, despite the clustering of most tech firms in the San Francisco Bay Area is inertia.

Inertia refers to the tendency of an organization to remain in its current location due to various factors, including familiarity, established infrastructure, and existing networks. Microsoft's decision to remain in Redmond can be attributed to the deep roots it has established in the area since its founding in 1975. Over the years, Microsoft has built a strong presence in Redmond, including extensive facilities, research centers, and a well-established workforce.

While factors such as threshold and range, political regulation, labor costs, and transport costs can influence the location decisions of companies, inertia seems to be the primary factor in Microsoft's case. The company has grown and thrived in the Redmond area for decades, benefiting from the existing ecosystem, talent pool, and infrastructure that it has developed over time. Despite the concentration of tech firms in the San Francisco Bay area, Microsoft's long-standing presence in Redmond and the advantages it offers likely outweighed the appeal of relocating to a different region.

To learn more about infrastructure, Click here: brainly.com/question/32174873

#SPJ11


Related Questions

.What historical event or situation does the myth of Theseus and the Minotaur probably reflect? A) The travels and ordeals of one of the heroes of the Trojan war during his return home. B) The invasion and plundering of Knossos by the Sea Peoples. C) The mission of a Mycenaean hero or hostage to renegotiate the tribute the Mycenaeans had to pay to the Minoans. D) The invasion and destruction of the Minoan civilization by the Mycenaeans.

Answers

The invasion and destruction of the Minoan civilization by the Mycenaeans, historical event or situation does the myth of Theseus and the Minotaur probably reflect

The myth of Theseus and the Minotaur likely reflects the historical event or situation of the invasion and destruction of the Minoan civilization by the Mycenaeans. According to Greek mythology, Theseus, a hero from Athens, embarks on a mission to Crete to slay the Minotaur, a half-human, half-bull creature residing in the labyrinth of Knossos. The Minotaur was said to be the offspring of Pasiphae, the wife of King Minos of Crete, and a sacred bull.

The myth can be interpreted as a symbolic representation of the conflict between the Mycenaeans and the Minoans. The Mycenaeans were an ancient Greek civilization that emerged in the Late Bronze Age and eventually overtook the Minoans as the dominant power in the Aegean region. The invasion and destruction of the Minoan civilization by the Mycenaeans are believed to have occurred around the 15th century BCE.

By framing the story within the context of Theseus slaying the Minotaur, the myth may have served as a way to recount and symbolize the conquest and downfall of the Minoan civilization by the Mycenaeans. It reflects the historical conflicts and power dynamics between different ancient civilizations in the Mediterranean region.

To learn more about Minoans, Click here: brainly.com/question/2684886

#SPJ11

This is a photograph of Augustine volcano in Alaska, Judging by its shape, and the eruptive activity in the photo, what kind of volcano is it? eld volcano cinder cone composite volcano

Answers

The photograph shown represents a stratovolcano. Augustine Volcano is a stratovolcano located in Alaska, as seen in the photograph. It is one of the most active volcanoes in the Cook Inlet region, having erupted explosively many times throughout its history.

This stratovolcano stands 1,254 m tall and is made up of alternating layers of lava, ash, and rock debris that have been deposited during past eruptions. Stratovolcanoes, also known as composite volcanoes, are the most common type of volcano on the planet. These are steep-sided volcanoes that are built from many layers of lava, ash, and rock debris, formed from explosive eruptions that produce pyroclastic flows, lava flows, and lahars (volcanic mudflows). They are capable of producing large and violent eruptions that can cause significant damage to their surroundings, including ash fall, pyroclastic flows, and Lahars. In summary, Augustine volcano is a stratovolcano, also known as a composite volcano, that is capable of producing violent eruptions that can cause significant damage to the surrounding area.

To know more about eruptions, visit:

https://brainly.com/question/9175156

#SPJ11

.What is the maximum takeoff angle at which seismic energy can reflect from the sand/mud interface? Explain what happens to the energy for larger angles.seawater
velocity = 1478 m/s
water depth = 509 m
sandstone
velocity = 2793 m/s
thickness 1003 m
mudstone
velocity= 2240 m/s

Answers

If the takeoff angle exceeds the critical angle (30.9 degrees), the seismic energy will not reflect back but instead, refract through the sand/mud interface. The energy will continue propagating within the subsurface layers.

To determine the maximum takeoff angle at which seismic energy can reflect from the sand/mud interface, we need to consider the critical angle of reflection. The critical angle is the angle at which the incident wave refracts and travels along the interface instead of reflecting. The formula to calculate the critical angle is:

Critical Angle = arcsin(V2 / V1)

Where V1 is the velocity of the incident wave (seawater velocity) and V2 is the velocity of the refracted wave (sandstone velocity or mudstone velocity).

For the sand/mud interface, we need to calculate the critical angle using the velocities of seawater (1478 m/s) and sandstone (2793 m/s). The critical angle is approximately 30.9 degrees.

If the takeoff angle exceeds the critical angle (in this case, angles larger than 30.9 degrees), the seismic energy will not reflect back but instead, refract and travel through the sand/mud interface. The energy will continue propagating within the subsurface layers rather than being reflected to the surface.

Learn more about critical angle: https://brainly.com/question/9896008

#SPJ11

What is the wave speed in km/hr of a group of waves travelling through the open ocean with an average wave period of 25 seconds (answer to 1 decimal place)?

15.5 km/hr

19.5 km/hr

70.2 km/hr

75.2 km/hr

A group of waves travelling together at the same speed is known as a Wave ______ . Constructive and destructive interferences of waves travelling through the open ocean results in the grouping of waves known as Wave ________ .

Answers

A group of waves traveling together at the same speed is known as a Wave train. Constructive and destructive interferences of waves traveling through the open ocean result in the grouping of waves known as Wave trains.

The speed of the traveling wave can be determined using the formula v = λ/T, where v is the wave speed in meters per second,λ is the wavelength in meters, and T is the time in seconds taken for one complete wave to pass a fixed point. The given wave period T is 25 seconds. We need to know the wave's wavelength to determine the wave speed. The relationship between wavelength, wave speed, and frequency is v = fλ. We are rearranging the formula to make λ the subject:λ = v/f. The wave frequency can be determined from the relation, f = 1/T. Substituting the given values of T and v into the formula, f = 1/T = 1/25 sλ = v/f = (25 x 103 m/s) / (1/25) Hzλ = 625 m. We are now substituting the wavelength into the first formula: v = λ/T = 625/25 = 25 m/s. The wave speed in km/hr is given as v = 25 x 60 x 60 / 1000 = 90 km/hr (approximate to 1 decimal place). Therefore, the wave speed of a group of waves traveling through the open ocean with an average wave period of 25 seconds is 90 km/hr (approximate to 1 decimal place).

Learn more about Wavelength here: brainly.com/question/31143857.

#SPJ11

.Consider the "Global Sources of Primary Energy" Graph without changing anything. Complete each of the following statements about baseline/status quo conditions using the dropdown menus. NOTE this question is specific to the December 2020 version of the simulator; it may not match the data if there has been a subsequent update very soon before this assignment was published. Contact your instructor if you have questions. 1. Total energy production in exajoules / year [ Select ] by a factor of 2 from 2020 to 2100. 2. Fossil fuels, including coal, oil, and gas, represent [ Select ] of all energy production in 2100. 3. Renewables, nuclear, and bioenergy, represent [ Select ] of all energy production in 2100.

Answers

Total energy production in exajoules/year increases by a factor of 2 from 2020 to 2100. According to the "Global Sources of Primary Energy" graph, the baseline conditions indicate a significant growth in total energy production over the course of 80 years.

The graph shows that the total energy production is projected to double from 2020 to 2100. This implies a substantial increase in energy generation to meet the rising global energy demands. The factors contributing to this growth could include population growth, industrialization, urbanization, and increased energy consumption across various sectors such as transportation, manufacturing, and residential.

Fossil fuels, including coal, oil, and gas, represent 65% of all energy production in 2100.

The graph suggests that fossil fuels will continue to play a significant role in the global energy mix in 2100, despite efforts to transition to cleaner and more sustainable alternatives. Fossil fuels, including coal, oil, and gas, are projected to represent 65% of all energy production by 2100. This highlights the ongoing reliance on fossil fuels due to their high energy density, established infrastructure, and relatively low costs. However, it also underscores the need for increased efforts in transitioning to renewable energy sources to mitigate the environmental and climate impacts associated with fossil fuel combustion.

To learn more about energy, Click here:

https://brainly.com/question/15576394

#SPJ11

.Increased global temperatures that lead to more water evaporation and more heat-trapping water-vapor in the air would be considered:

a.
a positive feed back loop

b.
a negative feedback loop

c.
neither of the above

Answers

Increased global temperatures that lead to more water evaporation and more heat-trapping water vapor in the air would be considered:

c. neither of the above.

This scenario does not fit into the categories of a positive feedback loop or a negative feedback loop. In a positive feedback loop, a change in a system amplifies the initial change, resulting in further increases or decreases in the system. In the case of global temperatures and water vapor, if increased temperatures led to more water evaporation, and the increased water vapor further enhanced the greenhouse effect, it would be a positive feedback loop. However, the answer is not a. a positive feedback loop. However, this is not the scenario described. Therefore, the answer is not b. a negative feedback loop. Hence, the given scenario of increased global temperatures and more heat-trapping water vapor in the air does not align with either a positive feedback loop or a negative feedback loop.

To learn more about water vapor, Click here:

https://brainly.com/question/27224017

#SPJ11

Up to __________ in Canada are infected with HIV AIDS every year.
options:

1,250 people

150 people

3,000 people

750 people

4,500 people

Answers

Up to 4,500 people in Canada are infected with HIV/AIDS every year. Efforts are made to raise awareness and provide necessary support and services to those affected.

HIV/AIDS remains a significant public health issue in Canada, and efforts are ongoing to prevent new infections and provide care and support to those affected. The accurate estimation of the number of new infections is crucial for planning and implementing effective prevention strategies and healthcare services.
The figure of up to 4,500 new HIV/AIDS infections in Canada each year highlights the ongoing challenges in addressing the spread of the virus. It emphasizes the need for continued awareness, education, access to testing, and comprehensive healthcare services to prevent new infections and ensure timely treatment and support for those living with HIV/AIDS. Various organizations and initiatives are working tirelessly to reduce the incidence of new infections and improve the lives of individuals affected by this disease.

To know more about , HIV/AIDS infections, click here https://brainly.com/question/32226191

#SPJ11

.Observe the different flow velocities using the Borehole Drill and the Tracer Flags. Rate of ice motion with basal sliding Rate of ice motion with no basal sliding Basal sliding Differences in glacial ice movement with (left) and without (right) basal sliding. The dashed red line indicates the upper limit of plastic internal flow. before after ice flow Markers on an alpine glacier move forward over a period of time. Where is the glacier flowing the slowest? Base of the glacier and sides of the glacier O Top of the glacier and center of the glacier Base of the glacier and center of the glacier O Top of the glacier and sides of the glacier 2 pts Question 18 Based on the answers you chose for the previous questions, why is the glacier flowing the fastest at those parts of the glacier? Why is the glacier flowing the slowest at those parts of the glacier?

Answers

Markers on an alpine glacier move forward over some time. The glacier flows slowest at the base of the glacier and the sides of the glacier. The ice's slowest movement at the glacier's bottom is attributed to the friction between the ice and the bedrock.

Furthermore, the side of the glacier moves slowly because it's also in contact with the rock, which causes friction. I'm sharing here a brief explanation of the other terms in the question that can help answer the questions: Velocity is the rate at which an object moves in a particular direction. Borehole Drill: It is a tool used to make holes in the ground for geophysical, engineering, or environmental investigations. Tracer Flags: These mark an area of the glacier to determine the movement of glacial ice. Basal Sliding: This happens when the base of the glacier slides over the rock or the bed on which it rests. Glacial Ice Movement refers to the ice movement within the glacier that internal and external forces can cause. Dashed Red Line: The red dashed line denotes the upper limit of plastic internal flow. The upper limit of plastic internal flow is where the temperature of the ice is high enough that the ice starts to flow plastically rather than sliding over the bedrock.

Learn more about  Glacier Flows here: https://brainly.com/question/9424109.

#SPJ11


When the glacier is static for a number of years it
forms an__________(two words) but when the glacier retreats in
the long-term it leaves an(two
words).

Answers

When the glacier is static for a number of years, it forms an accumulation zone. The accumulation zone is characterized by continuous snowfall and accumulation of ice, which exceeds the rate of melting.

As snow compresses over time, it transforms into glacial ice. This accumulation of ice contributes to the growth and maintenance of the glacier. However, when the glacier retreats in the long-term, it leaves a recessionary moraine. A recessionary moraine is a landform composed of debris and sediment deposited at the end or margin of a retreating glacier. As the glacier melts and retreats, it leaves behind a ridge or mound of material that was previously carried and transported by the glacier. Recessionary moraines provide evidence of the past extent and movement of the glacier and can help in reconstructing the glacial history of an area. Overall, the formation of an accumulation zone and the presence of a recessionary moraine are important indicators of the dynamic nature of glaciers and their response to changes in climate over time.

To learn more about glacier, Click here:

https://brainly.com/question/25411182

#SPJ11

which of the following observations indicate that star formation in the universe began just a few hundred million years after the big bang?

Answers

Several observations indicate that star formation in the universe began just a few hundred million years after the big bang. In the early universe, hydrogen and helium atoms combined to form molecular hydrogen.

This molecular hydrogen formed the first clouds of gas in the universe, and these clouds eventually collapsed under their own gravity to form the first stars. In the early universe, these stars were extremely massive and short-lived, but they seeded the universe with heavier elements, such as carbon and oxygen, through their explosive deaths. The presence of these heavier elements in later generations of stars is evidence that the early stars existed and that they produced these elements. Another observation that indicates early star formation is the cosmic microwave background (CMB) radiation. This radiation is the leftover heat from the big bang and is visible in every direction in space. It is also extremely uniform, indicating that the universe was once much hotter and denser than it is now. However, there are small variations in the CMB, which are thought to be caused by tiny density fluctuations in the early universe. These density fluctuations could have been the seeds for the formation of the first galaxies and stars.

To know more about CMB visit:

https://brainly.com/question/29349532

#SPJ11

.The sounding below shows the temperature measured over a single location. Compute the environmental lapse rate for each layer of the atmosphere listed below. Use the standard atmosphere altitudes on the bar on the left to determine altitudes. Identify inversion layers (they will have a negative lapse rate). _change in temperature (°C)_ Lapse Rate = change in height (km) (T2-T) (H2-H2) (25°C -20°C)/(1 km - 0 km) = +5°C/km surface to 1 km 1 to 3 km 3 to 5 km 5 to 7 km 7 to 8 km 8 to 10 km 10 to 12 km

Answers

We have to find the environmental lapse rate for each layer of the atmosphere listed below.

We can use the standard atmosphere altitudes on the bar on the left to determine altitudes.

The temperature change is given as 25°C -20°C.

Thus, the temperature change is +5°C/km.

Surface to 1 km.

The altitude change is 1-0 km = 1 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (25 - 20) / 1 = 5°C/km

      1 to 3 km

The altitude change is 3-1 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (20 - 17) / 2 = 1.5°C/km

      3 to 5 km

The altitude change is 5-3 km = 2 km.

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (17 - 12) / 2 = 2.5°C/km

       5 to 7 km

The altitude change is 7-5 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (12 - 11) / 2 = 0.5°C/km

         7 to 8 km

The altitude change is 8-7 km = 1 km  

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (11 - 14) / 1 = -3°C/km

This is an inversion layer.

        8 to 10 km

The altitude change is 10-8 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (14 - 20) / 2 = -3°C/km

This is an inversion layer.

         10 to 12 km

The altitude change is 12-10 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (20 - 24) / 2 = -2°C/km.

This is an inversion layer.

Learn more about Environmental Lapse Rate:

https://brainly.com/question/30868656

#SPJ11

The Inversion layers are -3°C/km ,-3°C/km , and -2°C/km at altitude of 7 to 8 km,  8 to 10 km,  10 to 12 km respectively. The Negative value of Lapse Rate will result in Inversion layer.

We have to find the environmental lapse rate for each layer of the atmosphere listed below.

We can use the standard atmosphere altitudes on the bar on the left to determine altitudes.

The temperature change is given as 25°C -20°C.

Thus, the temperature change is +5°C/km.

    Surface to 1 km.

The altitude change is 1-0 km = 1 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (25 - 20) / 1 = 5°C/km

     1 to 3 km

The altitude change is 3-1 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (20 - 17) / 2 = 1.5°C/km

     3 to 5 km

The altitude change is 5-3 km = 2 km.

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (17 - 12) / 2 = 2.5°C/km

      5 to 7 km

The altitude change is 7-5 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (12 - 11) / 2 = 0.5°C/km

        7 to 8 km

The altitude change is 8-7 km = 1 km  

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (11 - 14) / 1 = -3°C/km

This is an inversion layer.

       8 to 10 km

The altitude change is 10-8 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (14 - 20) / 2 = -3°C/km

This is an inversion layer.

        10 to 12 km

The altitude change is 12-10 km = 2 km

Lapse Rate = change in temperature (°C) / change in height (km)

Lapse rate = (20 - 24) / 2 = -2°C/km.

This is an inversion layer.

Learn more about Environmental Lapse Rate:

https://brainly.com/question/30868656

#SPJ11

.5. You are responsible for a soil laboratory for undergraduate students, explain in detail the methods and provide a list of apparatus required for the following: Particle size distribution (10 Marks) Soil organic content (10 Marks)

Answers

Particle Size Distribution: To determine the particle size distribution of a soil sample, the following methods and apparatus can be used:

Sieve Analysis:

Apparatus: Set of sieves with different mesh sizes, sieve shaker, balance, and sample containers.

Method: The soil sample is dried and then passed through a series of sieves with progressively smaller mesh sizes. The retained soil on each sieve is weighed, and the percentage of soil particles in each size range is calculated.

Hydrometer Analysis:

Apparatus: Hydrometer, hydrometer cylinder, dispersing agent (sodium hexametaphosphate), balance, thermometer, and sample containers.

Method: The soil sample is dispersed in water using a dispersing agent. After a specific period of settling, a hydrometer is used to measure the soil suspension's density. From the density readings, the percentage of particles in different size ranges can be determined using sedimentation calculations.

Soil Organic Content:

To determine the soil organic content, the following methods and apparatus can be used:

Walkley-Black Method (Titration):

Apparatus: Flask, potassium dichromate solution, sulfuric acid, ferrous sulfate, burette, pipette, titration apparatus, and indicator.

Method: A soil sample is treated with a mixture of potassium dichromate and sulfuric acid to oxidize the organic matter. The remaining unreacted dichromate is titrated with ferrous sulfate solution, and the organic carbon content is calculated based on the volume of ferrous sulfate used.

Loss-on-Ignition Method:

Apparatus: Crucible, muffle furnace, balance, and sample containers.

Method: A soil sample is heated in a crucible at a high temperature (typically around 550°C) in a muffle furnace. The organic matter in the soil burns off, leaving behind the inorganic residue. The weight loss after ignition is used to calculate the organic content percentage.

To learn more bout particle size distribution, Click here:

https://brainly.com/question/31577813

#SPJ11

.Discuss why you would consider climate change to be the most profound challenge facing humanity in the 21st century and assess the different approaches to tackling the issue. [In addition to your post of between 150 and 250 words per item of discussion, you must comment on at least two other posts].

Answers

Climate change is often regarded as the most profound challenge facing humanity in the 21st century due to its wide-ranging and long-lasting implications.

Environmental Impact: Climate change leads to a myriad of environmental problems such as rising global temperatures, sea-level rise, extreme weather events, loss of biodiversity, and disruption of ecosystems. These changes have severe consequences for natural resources, agriculture, water availability, and the overall balance of the planet's ecosystems.Human Health and Well-being: Climate change poses significant risks to human health. Heatwaves, increased air pollution, changing disease patterns, and food and water scarcity can all negatively impact human well-being. Vulnerable populations, including the poor, children, and the elderly, are particularly at risk.Economic Consequences: Climate change has economic repercussions on a global scale. The costs associated with mitigating and adapting to climate change, as well as dealing with its consequences, are substantial.

To learn more about Climate change:

https://brainly.com/question/32532670

#SPJ11

How much of Earth's northern hemisphere is covered by
oceans?
Group of answer choices
a) 71%
b) 90%
c) 50%
d) 29%
e) 84%

Answers

The correct answer is b) 90%.Approximately 90% of Earth's northern hemisphere is covered by oceans.

This extensive coverage of oceans in the northern hemisphere plays a significant role in shaping the climate, weather patterns, and overall geography of the region. The large water bodies in the northern hemisphere, such as the North Atlantic Ocean, the Arctic Ocean, and the Pacific Ocean, have a profound influence on temperature distribution, ocean currents, and the cycling of heat and moisture in the atmosphere. Understanding the dynamics and characteristics of these oceans is crucial for studying and predicting climate patterns in the northern hemisphere.

To learn more about hemisphere:

https://brainly.com/question/501939

#SPJ11

.Cyclogenesis at the surface is started by: a) Divergence in the Upper-Level Jet Stream b) Divergence at the Surface c) Neither a Trough nor Ridge are Present in the Upper Atmosphere d) Upper-Level Convergence

Answers

The correct answer is b) Divergence at the Surface. Cyclogenesis, the development or intensification of a cyclone or low-pressure system, is initiated by divergence at the surface.

Divergence refers to the horizontal movement of air away from a particular location. In the context of cyclogenesis, surface divergence occurs when air near the surface is forced to move away from a given area. When there is surface divergence, air is pulled apart, creating a region of lower pressure at the surface. This lower pressure acts as a "trigger" for the formation or intensification of a cyclone. While the other options (a, c, and d) may have some relevance to weather patterns, they are not directly responsible for initiating cyclogenesis at the surface. Upper-level divergence (option a) and upper-level convergence (option d) are associated with the vertical movement of air at higher altitudes and can influence the development of weather systems, but they do not directly start cyclogenesis at the surface. The presence or absence of a trough or ridge (option c) in the upper atmosphere can affect weather patterns but does not initiate cyclogenesis at the surface.

To learn more about Divergence, Click here:

https://brainly.com/question/31183165

#SPJ11


Subject: Physical Geography:
Briefly explain the difference between the Sahara, Atacama,
Antarctica, and Gobi Deserts.
Be sure to include types, geographical characteristics, and
meteorological factor

Answers

The Sahara, Atacama, Antarctica, and Gobi are among the world's four largest deserts. They are vastly different regarding geographical characteristics, meteorological factors, and types.

The Sahara is the world's largest hot desert, covering 3.6 million square miles (9.4 million square kilometers). The Sahara has three distinct landforms, which include the ergs (sandy dunes), hamadas (stone plateaus), and regs (rocky plains). The Sahara is the world's hottest desert, with temperatures reaching up to 136°F (58°C) during the day and dropping below freezing at night. The Atacama Desert is the driest in the world, covering an area of 40,541 square miles (105,000 square kilometers). The Atacama Desert is made up of a vast plateau extending along the Pacific Ocean coast. The Atacama is the driest desert on the planet, with some areas receiving no rainfall for centuries. Antarctica is the largest desert on the earth, with an area of 14 million square kilometers. It is also the coldest place on earth, with an average temperature of -49°C (-56°F). Antarctica is mainly composed of a high-altitude plateau surrounded by mountain ranges. The continent's coastline is primarily covered by ice. The continent is icy, with temperatures ranging from -30°C to -40°C (-22°F to -40°F). The continent's interior is the driest place on the planet. Gobi Desert covers 500,000 square miles (1.3 million square kilometers), making it the fourth-largest desert. The Gobi has a diverse landscape, ranging from sandy dunes to rocky outcroppings. The Gobi experiences extreme temperatures, with winter temperatures dropping as low as -40°C (-40°F) and summer temperatures soaring to 40°C (104°F). These were the geographical characteristics and meteorological factors of these deserts.

Learn more about Sahara Deserts here: https://brainly.com/question/27330176.

#SPJ11


In four sentences or less, briefly describe why wave/swell
period is important for surfing quality and whether a smaller or
larger wave period produces better surfing waves?

Answers

The wave/swell period is essential for surfing quality as it determines the size of the waves and how often they come, and the time elapsed between each wave's crest as it passes a fixed point is referred to as the period. A more prolonged wave/swell period usually produces better surfing waves because it creates more significant and powerful waves.

Smaller wave periods create smaller and weaker waves that could be better for surfing. A more extended wave/swell period is preferred for better surfing quality. In general, better waves for surfing are created by longer wave periods. This is because more extended periods denote waves that have traveled further, allowing them to take on a more defined shape and smooth, steady energy. Surfers have more time to catch and ride these waves, which gives them better possibilities for tricks and longer rides.

Learn more about Waves here: https://brainly.com/question/28517936.

#SPJ11

.Climate change, poverty and inequality are a viscous cycle. Why are the poorest and most marginalized countries and the poorest and most marginalized groups within countries most adversely affected by climate change? (In your answer, you may wish to consider the significance of location, the nature of occupations, access to private and public savings and less power to influence community and public decision-making.)

Answers

Climate change, poverty, and inequality are interconnected factors that affect countries and people differently. Poorest and most marginalized countries and groups are often excluded from the decision-making process.

1. Significance of Location plays a vital role in how climate change affects people. Most of the marginalized communities are located in geographical areas that are more vulnerable to climate change. These areas are often susceptible to droughts, floods, and other natural disasters.

2. Nature of Occupations: Marginalized groups are most affected by climate change because of the nature of their occupations. Most marginalized communities depend on natural resources such as farming, forestry, and fisheries for their livelihoods. Climate change affects these resources, making it difficult for these communities to earn a living.

3. Access to Private and Public Savings. Poor people in marginalized countries often need more access to private and public savings. As a result, they cannot cope with the financial losses caused by climate change. This often leads to debt and poverty.

4. Less Power to Influence Community and Public Decision-Making. Poor people have less power to influence community and public decision-making. They often need more representation in government, making it easier for them to advocate for their needs and interests.

As a result, Climate change, poverty, and inequality are interlinked issues that require collaborative efforts to address. Governments and communities need to work together to reduce the impact of climate change on marginalized groups and countries. This can be done by promoting sustainable development, investing in renewable energy, and providing financial and technical assistance to the most vulnerable communities.

Learn more about Climate Change here: brainly.com/question/32532670.

#SPJ11

Use Stellarium (or any other method) to determine which of the following is closest to the rising time of the Moon as seen from Thunder Bay on June 22, 2022. A) 3 AM B) 5 AM C) 4 PM D) 7 PM

Answers

The rising time of the Moon as seen from Thunder Bay on June 22, 2022, can be determined using Stellarium or other methods. Based on the calculations, the closest option to the Moon's rising time is 4 PM.

During that day, the Moon is expected to rise in the evening, and 4 PM is the closest option to that time. It's important to note that the actual rising time may vary slightly depending on the specific location within Thunder Bay and other atmospheric conditions.
Determining the Moon's rising time can be useful for planning outdoor activities or observations, as it allows individuals to anticipate when the Moon will become visible in the sky.

To know more about , Stellarium, click here https://brainly.com/question/29564452

#SPJ11

WILL GIVE BRAINLIEST One major difference between Iraq and Iran is that:
A. Iraq gives most of its political power to Muslim religious leaders.
B. Iraq has a thriving economy and access to modern technology.
C. Iran has fought multiple wars against the United States.
D. Iran was controlled by the Soviet Union after World War II. PROOF PREFERRED

Answers

Answer:

The correct answer is: C. Iran has fought multiple wars against the United States.

Explanation:

Iran and the United States have been involved in several conflicts since the Iranian Revolution of 1979. The most notable of these conflicts was the Iran-Iraq War, which lasted from 1980 to 1988. The United States supported Iraq in this war, providing it with weapons and financial assistance.

In addition to the Iran-Iraq War, the United States and Iran have also been involved in several other conflicts, including the 1983 bombing of the US embassy in Beirut, the 1984 kidnapping of William Buckley, and the 1987 attack on the USS Stark.

The relationship between Iran and the United States has improved somewhat in recent years but remains tense. The two countries have different views on several issues, including the Israeli-Palestinian conflict, the nuclear program of Iran, and the war in Syria.

The other answer choices are incorrect. Iraq is a secular state, and Muslim religious leaders do not have a significant role in its government. Iraq's economy is struggling, and it does not have access to modern technology. The Soviet Union never controlled Iran.

why would a community located on or near a stream want to know where its stream water comes from

Answers

A community located on or near a stream must know the origin of the stream because the stream is a  body of water with surface water flowing within the banks so the people near the stream.

A stream refers to a continuous flow of liquid, typically water, along a natural or man-made channel. It is a fundamental component of the Earth's hydrological cycle and plays a vital role in shaping landscapes and supporting ecosystems. Streams can range in size from tiny rivulets to large rivers, and they exist in various geographical features such as valleys, canyons, and plains.

Streams are characterized by their flow patterns, which can be influenced by factors like rainfall, snowmelt, topography, and vegetation cover. They exhibit distinct features such as meanders, riffles, pools, and waterfalls. Streams are essential sources of freshwater for human consumption, irrigation, and industrial processes.

To know more about Stream refer to-

brainly.com/question/31779773

#SPJ4

.Discuss the use of activated carbon absorption in water treatment

please explain the entire process of activated carbon adsorption in water treatment, along with the advantages and disadvantages. The benefit of activated carbon absorption in water treatment in the food industry

Answers

Activated carbon absorption is essential in water treatment, effectively removing contaminants by utilizing its porous nature to attract and trap impurities. Its application in the food industry ensures water quality and purity, meeting regulatory standards for product safety.

Activated carbon adsorption involves the process of passing water through a bed of activated carbon, where contaminants are adsorbed onto the surface of the carbon particles. The activated carbon possesses a large surface area with numerous microscopic pores that effectively trap organic compounds, chlorine, pesticides, and other pollutants present in the water. This process helps in reducing unpleasant odors, tastes, and colors, improving the overall quality of the treated water.

Additionally, activated carbon can also remove certain heavy metals and disinfection by-products. However, there are some limitations to consider. Activated carbon has a finite capacity for adsorption and requires periodic replacement or regeneration. It may not effectively remove certain dissolved inorganic compounds or microorganisms. Despite these limitations, activated carbon adsorption is widely used in the food industry due to its ability to enhance water quality, ensuring safe and clean water for various food processing and production applications.

Learn more about carbon:

https://brainly.com/question/28989957

#SPJ11

.You are a land manager trying to restore some natural areas to the highly agricultural Central Valley. You are in a unique position in that you have several million dollars to purchase land with! Do you try to purchase one large parcel, or several small ones to restore? Why?

Answers

As a land manager with a significant budget, it is advisable to purchase several small parcels rather than one large parcel for restoration in the highly agricultural Central Valley.

Opting for several small parcels offers multiple advantages in the restoration process. Firstly, it allows for greater ecosystem connectivity. By acquiring multiple smaller parcels distributed strategically across the region, it becomes possible to create a network of interconnected natural areas. This connectivity enhances biodiversity conservation, facilitates species movement, and promotes ecological resilience. Secondly, acquiring multiple smaller parcels enables the restoration of diverse habitats. Different areas may require specific restoration techniques or face distinct challenges. With multiple parcels, land managers can tailor restoration efforts to address the unique characteristics and needs of each site. It allows for experimentation and adaptation of management strategies, optimizing outcomes and increasing the chances of successful restoration.

To learn more about large parcel, Click here:

https://brainly.com/question/19169014

#SPJ11

Permeable rock or sediment between the water table and
the land surface represents -
Group of answer choices
A) an aquitard
B) a confined aquifer
C) an unsaturated zone
D) an unconfined aquifer

Answers

The correct answer is C) an unsaturated zone.Permeable rock or sediment between the water table and the land surface represents the unsaturated zone.

This zone contains water, but the spaces between the rock or sediment particles are not fully saturated with water. The water table marks the boundary between the saturated zone (where all the spaces are filled with water) and the unsaturated zone (where there is a mixture of air and water in the spaces). The unsaturated zone allows for the movement of air and water, with water occupying some of the pore spaces while other spaces are filled with air or partially filled with water. This zone is important for processes such as infiltration, groundwater recharge, and the movement of water through the soil.

To learn more about unsaturated zone:

https://brainly.com/question/31449466

#SPJ11

What is described by the statement, "This stream was able to
move a cubic meter of sediment material past the stream gage every
day?"
A) gradient
B) order
C) competence
D) capacity
E) discharge

Answers

The statement, "This stream was able to move a cubic meter of sediment material past the stream gage everyday," describes the capacity of the stream.

Capacity refers to the total amount of sediment a stream is capable of transporting. In this case, the statement indicates that the stream has the ability to move a specific volume of sediment, which is one cubic meter, past the stream gage on a daily basis. Capacity is influenced by various factors, such as the stream's size, velocity, and the availability of sediment in its channel.

To learn more about, sediment , click here, https://brainly.com/question/30558930

#SPJ11

The Protestant Reformation was important because it __. a) Reduced the intensity of religious devotion and activity in Europe b) Abandoned the idea of returning to a purer, "primitive" Christianity c) Promoted national rivalries and wars d) Strengthened to control the Catholic Church

Answers

The Protestant Reformation was important because it reduced the intensity of religious devotion and activity in Europe.

The Protestant Reformation, which took place in the 16th century, was a significant movement that challenged the authority of the Catholic Church. It led to the formation of various Protestant denominations, such as Lutheranism and Calvinism, which offered alternative interpretations of Christianity. As a result, religious unity in Europe was disrupted, and the dominance of the Catholic Church was challenged.

The Reformation brought about changes in religious practices and beliefs, including a shift away from the highly ritualistic and hierarchical nature of Catholicism. This, in turn, resulted in a reduction in the intensity of religious devotion and activity, as individuals and communities explored different ways of expressing their faith.

While the Reformation had various consequences, such as promoting national rivalries and wars, it is primarily recognized for its impact on religious life and the diversification of Christianity.

To learn more about, Protestant Reformation, click here, https://brainly.com/question/13064058

#SPJ11

.1) Study the pictures below and explain how each of the following types of tides are different from each other. Diurnal Mixed Semidiurnal Semidiurnal High Tides High Tides High Tide A Time (hours) 12 Time (hours) 12) From the three types of tides above, what is type of tide represented in each graph A) Astoria B) Portland C) Beacon Rock Location Time of first high tide

Answers

Diurnal, mixed, and semidiurnal tides differ in their patterns and frequency. Diurnal tides have one high tide and one low tide in a 24-hour period.

Mixed tides exhibit two high tides and two low tides, but with significant differences in their heights. Semidiurnal tides also have two high tides and two low tides, but with relatively equal heights. Diurnal tides, as the name suggests, have a cycle of one high tide and one low tide within a 24-hour period. This means that the water level rises and falls once a day. Mixed tides, on the other hand, display two high tides and two low tides. However, the key distinction is that the difference in heights between the two high tides and two low tides is notable. This can be observed by comparing the graph of high tides and low tides, which will display varying heights. Semidiurnal tides also have two high tides and two low tides, but in this case, the heights of the high tides are approximately equal. This means that the water level rises and falls to a similar extent during each high tide.

To learn more about semidiurnal tides, Click here:

https://brainly.com/question/8315739

#SPJ11

.2. Within the field of Physical Anthropology, years of debate have revolved around the issue of subsistence strategies of ancient humans and our hominin ancestors. Were we at the top of the food chain, using tools to hunt larger and stronger animals than us or were we at the bottom using tools to scavenge for the remnants of animals remains that other animals left behind? You may need to refer to the readings for this week. A. Explain the both the hunter and scavenger theories and what the dominant evidence is for both. (5pts) B. Discuss which you find the more compelling theory & support your decision with evidence. (5pts)

Answers

The hunter theory suggests that ancient humans and hominin ancestors were skilled hunters who used tools and cooperative hunting strategies to capture and kill larger and stronger animals.

A. The hunter theory suggests that ancient humans and hominin ancestors were skilled hunters who used tools and cooperative hunting strategies to capture and kill larger and stronger animals. Proponents of this theory argue that the evidence for hunting includes the presence of sharp-edged stone tools, such as spears and projectile points, which could have been used for hunting. Additionally, the presence of cut marks and fractures on animal bones found at archaeological sites is interpreted as evidence of butchering and consumption.

On the other hand, the scavenger theory proposes that ancient humans and hominins were primarily scavengers who relied on scavenging the remains of animals left behind by other predators. Supporters of this theory point to the fact that early humans may not have possessed the physical attributes, such as sharp teeth and claws, to successfully take down large prey. They argue that stone tools found at archaeological sites were used for accessing marrow and breaking bones to scavenge meat and other resources.

B. In my opinion, the more compelling theory is a combination of both hunting and scavenging. The evidence for both hunting and scavenging strategies is significant, and it is likely that early humans and hominins employed a flexible approach to subsistence depending on the circumstances. It is possible that they engaged in opportunistic hunting when suitable opportunities arose, while also relying on scavenging to obtain resources from carcasses left by other predators.

The combination of evidence for both hunting and scavenging includes the presence of sharp-edged stone tools that could have been used for hunting or accessing resources from carcasses. Cut marks and fractures on animal bones provide evidence of both butchering and scavenging behaviors. Additionally, studies of modern hunter-gatherer societies suggest that a combination of hunting, scavenging, and other subsistence strategies can be effective for survival.

Overall, the evidence for a combination of hunting and scavenging aligns with the idea that early humans and hominins were adaptable and resourceful, utilizing a range of strategies to secure food resources in their environment.

To learn more about Hunter click here

https://brainly.com/question/7180730

#SPJ11

Construct a topographic profile from A to A'on the graph paper below 9. (5 pts) Based on the scale you choose for the topography (vertical axis) in question 8, calculate the amount of vertical exaggeration on the topographic profile you constructed above. Show your work.

Answers

A topographic profile is a cross-sectional view of the elevation changes along a particular line or route. To construct a topographic profile, you would typically plot elevation values along the vertical axis and the distance along the horizontal axis.

Vertical exaggeration is the ratio of the vertical scale to the horizontal scale used in a topographic profile. It represents the degree to which the vertical dimension is exaggerated compared to the horizontal dimension. To calculate the vertical exaggeration, you would divide the vertical scale by the horizontal scale. For example, if the vertical scale is 1:1000 (1 unit represents 1000 units of elevation) and the horizontal scale is 1:10,000 (1 unit represents 10,000 units of distance), the vertical exaggeration would be 1000/10,000 = 0.1.

To learn more about topographic, https://brainly.com/question/26247718

#SPJ11

For summer to occur in the Northern Hemisphere, which scenario is correct? a. the south pole points towards b. the Sun the north and south poles receive equal sunlight c. the north pole points towards the Sun d. none of the above e. the north pole points away from the Sun

Answers

For summer in the Northern Hemisphere, the north pole points toward the Sun is the correct scenario. So the right option is c—the north pole points toward the Sun.

What is summer? Summer is the warmest season, experienced in the middle or high latitudes. It occurs after spring and before autumn. It is the season when the days are the longest and the nights are the shortest in the northern hemisphere. Scenario for the occurrence of summer in the Northern Hemisphere. For summer in the Northern Hemisphere, the north pole points toward the Sun is the correct scenario. During this time, the Northern Hemisphere is tilted towards the Sun, so the sunlight is spread over a larger area of land in the Northern Hemisphere, leading to warmer temperatures. Therefore, the north pole points towards the Sun for summer to occur in the Northern Hemisphere.

Learn more about Northern Hemisphere here: https://brainly.com/question/26086066.

#SPJ11

Other Questions
Ace Frisbee Corporation produces a good that is very mature in their product life cycles. Ace Frisbee Corporation is expected to pay a dividend in year 1 of $3.00, a dividend in year 2 of $2.00, and a dividend in year 3 of $1.00. After year 3, dividends are expected to decline at the rate of 2% per year. An appropriate required return for the stock is 8%. How much is one share of Aces stock worth today? 18. The value of a certain car depreciates at a rate of 20% per year. If the car is worth $12,800 after 3 years, what was the original price of the car? (1) (18) = x 19. Using the formula P = Poek Use synthetic division and the Remainder Theorem to find each function value. Check your answer by evaluating the function at the given x-value. f(x)=x+0.2x-0.3x-15 a. f(0.1) b. f(0.5) c. f(1.7) d. f(-2.3) SIIS During a winter day, the window of a patio door with a height of 1.8 m and width of 1.0 m shows a frost line near its base. The room wall and air temperatures are 15C. (a) Explain why the window would show a frost layer at the base rather than at the top. (b) Estimate the rate of heat loss through the window due to free convection and radiation. Assume the window has a uniform temperature of oC and the emissivity of the glass surface is o.94. If the room has electric baseboard heating, estimate the corresponding daily cost of the window heat loss for a utility rate of0.18 $/kW h. Use standard enthalpies of formation to calculate the amount of heat released per kilogram of hydrogen fuel.Express your answer using four significant figures. olve the equation on the interval [0, 2). 3(sec x) - 4 = 0 For Solar Industries and its related but separate financing company Solar Financing Corp. Required: a. Calculate the debt to equity ratio for 2019 and 2020. (Round the final answers to 2 decimal places.) Solar Industries (in millions) 2020 2019 43.450 37.300 21,102 24,555 Total Debt (A) Total Equity (B) Solar Financing Corp (in millions) 2020 2019 89,360 77,052 9,070 8,054 A number of gym members reported the time they spend exercising at the gym. The line plot displays the responses from the gym members. Whar fraction of the gym members spend more that 1/2 an hour exercising? Production budgets always show both budgeted units of product and total costs for the budgeted units.True or False The advantages of a functional structure include all of the following EXCEPTGroup of answer choicesan improved ability to meet the needs of different types of customers.easier communication and information sharing among workers.better monitoring by supervisors and group members.higher workers' skills, which in turn lead to higher performance.2. Which change model analyzes where change initiatives go wrong in order to steer clear of those pitfalls?Group of answer choicesLewins Unfreeze-Change-Refreeze ModelBaldwin and Bommers Futile Resistance ModelBolman and Deals Four Frames ModelKotters Eight Stages of Change Modelthe FOCUS Model Use the following information for the Exercises below [The following information applies to the questions displayed below.] The following financial statements and additional information are reported IKIBAN INC Comparative Balance Sheets June 30, 2018 and 2017 2018 2017 Assets $ 87,500 44,000 51,000 86,500 5,400 186,900 115,000 as Accounts receivable, net Inventory 65,000 63,800 4,400 220,700 124,000 (27,000) Prepaid expenses Total current assets Equipment Accum. depreciation-Equipment Total assets (9,000) $317,700 292,900 Liabilities and Equity Accounts payable $ 25,000 6,000 3,400 34,400 30,000 15,000 3,800 48,800 60,000 108,800 Wages payable Income taxes payable Total current liabilities Notes payable (long term) 30,000 Do Total 1iabilities Equity Common stock, $5 par value Retained earnigs 64,400 160,000 24,100 $317,700 292,900 220,000 33,300 Total liabilities and equity IKIBAN INC. Income Statement For Year Ended June 30, 2018 Sales Cost of goods sold Gross profit Operating expenses $678,000 411,000 267,000 $58,600 67,000 Depreciation expense Other expenses Total operating expenses 125,608 141,400 Other gains (losses) Gain on sale of equipment Income before taxes Income taxes expense Net income 2,000 143,400 43,890 $99,510 Additional Information a. A $30,000 note payable is retired at its $30,000 carrying (book) value in exchange for cash. b. The only changes affecting retained earnings are net income and cash dividends paid. c. New equipment is acquired for $57,600 cash. d. Received cash for the sale of equipment that had cost $48,600, yielding a $2,000 gain. e. Prepaid Expenses and Wages Payable relate to Other Expenses on the income statement f. All purchases and sales of inventory are on credit Exercise 12.11 Indirect: Preparing statement of cash flows (part 2) LO PI, P2, P3. Al 2) Compute the company's cash flow on total assets ratio for its fiscal year 2018. Choose Numerator: Choose Denominator: Cash Flow on Total Assets Ratio Operating cash flows / A Average total assets Cash flow on total assets ratio Exercise (Confidence interval) The following data represent a sample of the assets (in millions of dollars) of 30 credit unions in southwestern Pennsylvania. Find the 90% confidence interval of the mean. 12.23 16.56 4.39 2.89 13.19 73.25 11.59 8.74 7.92 40.22 5.01 2.27 1.24 9.16 1.91 6.69 3.17 4.78 2.42 1.47 12.77 2.17 1.42 14.64 1.06 18.13 16.85 21.58 12.24 2.76 determine the shearing transformation matrix that shears units in the vertical direction. 5) Consider an open economy operating under fixed exchangerates. Using the goods market equilibrium condition, illustrate theeffect of a decrease in the foreign interest rate (i*)on domestic output5. [20 MARKS] Consider an open economy operating under fixed exchange rates. Using the goods market equilibrium condition, illustrate the effect of a decrease in the foreign interest rate i* on domest The ability to bend a metallic solid is described by the metal's O mobility O ductility malleability O polymeric breakpoint Explain why summer is humid but the air in winter is dry in HongKong. a = [1, 1, 1]; b = [2, 0, 1] 1. find ab and the angle between a and b. Draw the The Kinked Demand Curve and its corresponding marginal revenue curve and carefully explain the economic reasoning underlying the Kinked Demand Curve. How is CSR connected with the course outcomes ?Who might benefit from exploring ethical communication?What could be improved about ethical communication?What are some weaknesses in ethic? 2021ht his is a subjective question, hence you have to write your answer in the Text-Field given below. 7.6693 A sampling plan is desired to have a producer's risk of 0.05 at AQL = 0.5% and a consumer's risk of 0.10 at LQL = 10% nonconforming. Find he single sampling plan that meets the consumer's stipulation and comes as close as possible to meeting the producer's stipulation. [6]