Answer:
Sb
Explanation:
The periodic trend for atomic radius is that it decreases from left to right and increases from top to bottom, therefore the elements with the larger atomic radius will be the ones which are closest to the bottom left corner of the periodic table. Since all of these elements are in the same group, the one with the largest atomic radius will be the one at the "bottom", and that is Sb.
Which is one characteristic of producers?
They recycle nutrients.
They do not eat other organisms.
They break down waste for energy.
They use other organisms for energy.
Answer: They use other organisms for energy
Explanation:
Answer:
they use other organisms for energy
Explanation: d
Draw the Lewis structure of N₂O₄ and then choose the appropriate pair of hybridization states for the two central atoms. Your answer choice is independent of the orientation of your drawn structure.
Answer:
See explanation
Explanation:
In this case, we have to keep in mind the valence electrons for each atom:
N => 5 electrons
O => 6 electrons
If the formula is [tex]N_2O_4[/tex], we will have in total:
[tex](5*2)+(6*4)=34~electrons[/tex]
Additionally, we have to remember that each atom must have 8 electrons. So, for oxygens 5 and 3 we will have 3 lone pairs and 1 bond (in total 8 electrons. For oxygens, 6 and 4 we will have 2 lone pairs and 2 bonds (in total 8 electrons) and for nitrogens 1 and 2 we will have 4 bonds (in total 8 electrons).
To find the hybridization, we have to count the atoms and the lone pairs around the nitrogen. We have 3 atoms and zero lone pairs. If we take into account the following rules:
[tex]Sp^3~=~4[/tex]
[tex]Sp^2~=~3[/tex]
[tex]Sp~=~2[/tex]
With this in mind, the hybridization of nitrogen is [tex]Sp^2[/tex].
See figure 1
I hope it helps!
The central nitrogen atoms in N2O4 are both sp2 hybridized.
The Lewis structure shows the number of electron pairs that surround the atoms in a molecule as dots. It is quite easy to determine the number of valence electrons in a molecule simply by observing its Lewis dot structure.
The molecule N2O4 has 34 valence electrons as shown in its dot electron structure. The central nitrogen atoms in N2O4 are both sp2 hybridized as shown. The formal charges on each atom in N2O4 are also shown.
Learn more:
What compound is formed when 2,2-dimethyloxirane (2-methyl-1,2-epoxypropane) is treated with ethanol containing sulfuric acid
Answer:
2-ethoxy-2-methylpropan-1-ol
Explanation:
On this reaction, we have an "epoxide" (2-methyl-1,2-epoxypropane). Additionally, we have acid medium (due to the sulfuric acid [tex]H_2SO_4[/tex]). The acid medium will produce the hydronium ion ([tex]H^+[/tex]). This ion would be attacked by the oxygen of the epoxide. Then a carbocation would be produced, in this case, the most stable carbocation is the tertiary one. Then an ethanol molecule acts as a nucleophile and will attack the carbocation. Finally, a deprotonation step takes place to produce 2-ethoxy-2-methylpropan-1-ol.
See figure 1
I hope it helps!
A sample of N2(g) was collected over water at 25 oC and 730 torr in a container with a volume of 340 mL. The vapor pressure of water at 25 oC is 23.76 torr. What mass of N2 was collected
Answer:
0.36 g of N2.
Explanation:
The following data were obtained from the question:
Temperature (T) = 25 °C
Volume (V) = 340 mL
Measured pressure = 730 torr
Vapour pressure = 23.76 torr
Mass of N2 =..?
First, we shall determine the true pressure of N2. This can be obtained as follow:
Measured pressure = 730 torr
Vapor pressure = 23.76 torr
True pressure =..?
True pressure = measured pressure – vapor pressure
True pressure = 730 – 23.76
True pressure = 706.24 torr.
Converting 706.24 torr to atm, we have:
760 torr = 1 atm
Therefore,
706.24 torr = 706.24 / 760 = 0.929 atm
Next, we shall convert 340 mL to L. This is illustrated below:
1000 mL = 1 L
Therefore,
340 mL = 340/1000 = 0.34 L
Next, we shall convert 25 °C to Kelvin temperature. This is illustrated below:
Temperature (K) = Temperature (°C) + 273
T(K) = T (°C) + 273
T (°C) = 25 °C
T(K) = 25 °C + 273
T (K) = 298 K
Next, we shall determine the number of mole of N2. This can be obtained as follow:
Pressure (P) = 0.929 atm
Volume (V) = 0.34 L
Temperature (T) = 298 K
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) =...?
PV = nRT
0.929 x 0.34 = n x 0.0821 x 298
Divide both side by 0.0821 x 298
n = (0.929 x 0.34 ) /(0.0821 x 298)
n = 0.0129 mole
Finally, we shall determine the mass of N2 as shown below:
Mole of N2 = 0.0129 mole
Molar mass of N2 = 2x14 = 28 g/mol
Mass of N2 =.?
Mole = mass /Molar mass
0.0129 = mass of N2/ 28
Cross multiply
Mass of N2 = 0.0129 x 28
Mass of N2 = 0.36 g
Therefore, 0.36 g of N2 was collected.
What is the mass of a sample of water that takes 2000 kJ of energy to boil into steam at 373 K. The latent heat of vaporization of water is 2.25 x 10^6 J kg-1
Answer:
0.89kg
Explanation:
Q=mL L=specific latent heat
Q=energy required in J
m=mass in Kg
Q=mL
m=Q/L
m=2000000J/2.25 x 10^6 J kg-1
m=0.89kg
Green plants use light from the Sun to drive photosynthesis. Photosynthesis is a chemical reaction in which water and carbon dioxide chemically react to form the simple sugar glucose and oxygen gas . What mass of simple sugar glucose is produced by the reaction of 4.9 of carbon dioxide?
Answer:
3.3 g of glucose, C6H12O6.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
6CO2 + 6H2O —> C6H12O6 + 6O2
Next, we shall determine the mass of CO2 that reacted and the mass of C6H12O6 produced from the balanced equation.
This is illustrated below:
Molar mass of CO2 = 12 + (2x16) = 44 g/mol
Mass of CO2 from the balanced equation = 6 x 44 = 264 g
Molar mass of C6H12O6 = (12x6) + (12x1) + (16x6) = 180 g/mol
Mass of C6H12O6 from the balanced equation = 1 x 180 = 180 g
From the balanced equation above,
264 g of CO2 reacted to produce 180 g of C6H12O6.
Finally, we shall determine the mass of C6H12O6 produced by reacting 4.9 g of CO2 as follow:
From the balanced equation above,
264 g of CO2 reacted to produce 180 g of C6H12O6.
Therefore, 4.9 g of CO2 will react to produce = (4.9 x 180)/264 = 3.3 g of C6H12O6.
Therefore, 3.3 g of glucose, C6H12O6 were obtained from the reaction.
A 25.0-mL sample of 0.100M Ba(OH)2(aq) is titrated with 0.125 M HCl(aq).
How many milliliters of the titrant will be needed to reach the equivalence point?
Answer:
20.0
Explanation:
NaOH = (25.0) (0.100m) \ 0.125M = 20.0mL
11. In TLC analysis of ferrocene and acetylferrocene (on silica TLC plate) which prediction is correct: A) ferrocene is more polar and moves higher up the plate (higher Rf value) B) Acetylferrocene is more polar and moves higher up the plate (higher Rf value) C) ferrocene is less polar and moves higher up the plate (higher Rf value) D) Acetylferrocene is less polar and moves higher up the plate (higher Rf value)
Answer:
Alternative C would be the correct choice.
Explanation:
The dual compounds were evaluated on something like a TLC plate through three separate additives in conducting a TLC study of ferrocene versus acetylferrocene.The polar as well as nonpolar ferrocene where nonpolar is about 0.63 with the maximum [tex]R_f[/tex] value, and indeed the polar is somewhere around 0.19 with [tex]R_f[/tex].TLC plate (30:1 toluene/ethanol) established with.The other three choices are not related to the given circumstances. So that option C would be the appropriate choice.
A major component of gasoline is octane, C8H18. When octane is burned in air, it chemically reacts with oxygen gas (O2) to produce carbon dioxide (CO2) and water (H2O) . What mass of carbon dioxide is produced by the reaction of 3.2g of oxygen gas? Round your answer to 2 significant digits.
Answer:
[tex]m_{CO_2}=2.8gCO_2[/tex]
Explanation:
Hello,
In this case, the combustion of octane is chemically expressed by:
[tex]C_8H_{18}+\frac{25}{2} O_2\rightarrow 8CO_2+9H_2O[/tex]
In such a way, due to the 25/2:8 molar ratio between oxygen and carbon dioxide, we can compute the yielded grams of carbon dioxide (molar mass 44 g/mol) as shown below:
[tex]m_{CO_2}=3.2gO_2*\frac{1molO_2}{32gO_2} *\frac{8molCO_2}{\frac{25}{2}molO_2 } *\frac{44gCO_2}{1molCO_2}\\ \\m_{CO_2}=2.8gCO_2[/tex]
Best regards.
How many milliliters of a 0.250 MNaOHMNaOH solution are needed to completely react with 500. gg of glyceryl tripalmitoleate (tripalmitolein)
Answer:
[tex]7.48X10^3~mL[/tex]
Explanation:
For this question we have:
-) A solution NaOH 0.25 M
-) 500 g of glyceryl tripalmitoleate (tripalmitolein)
We can start with the reaction between NaOH and tripalmitolein. NaOH is a base and tripalmitolein is a triglyceride, therefore we will have a saponification reaction. The products of this reaction are glycerol and (E)-hexadec-9-enoate.
Now, with the reaction in mind, we can calculate the moles of NaOH that we need if we use the molar ratio between NaOH and tripalmitolein (3:1) and the molar mass of tripalmitolein (801.3 g/mol). So:
[tex]500~g~tripalmitolein\frac{1~mol~tripalmitolein}{801.3~g~tripalmitolein}\frac{3~mol~NaOH}{1~mol~tripalmitolein}=1.87~mol~NaOH[/tex]
With the moles of NaOH we can calculate the volume (in litters) if we use the molarity equation and the Molarity value:
[tex]M=\frac{mol}{L}[/tex]
[tex]0.25~M=\frac{1.87~mol~NaOH}{L}[/tex]
[tex]L=\frac{1.87~mol~NaOH}{0.25~M}[/tex]
[tex]L=7.48[/tex]
Now we can do the conversion to mL:
[tex]7.48~L~\frac{1000~mL}{1~L}=~7.48X10^3~mL[/tex]
I hope it helps!
Where are the lanthanides and actinides found on the periodic table?
A. Columns 7 and 8
B. Columns 3 - 12, in the center of the table
C. Rows 6 and 7, separated from the rest of the table
D. Columns 1 and 2
Answer:
C. Rows 6 and 7, separated from the rest of the table
Explanation:
The lanthanides and actinides are groups of elements in the periodic table, that are thirty (30) in number. They are separated from the rest of the periodic table, usually appearing as separate rows at the bottom. They are often called the inner transition metals, because they all fill the f-block.
Therefore, the correct option is C
" They are found in Rows 6 and 7, separated from the rest of the table"
Sulfur dioxide and oxygen react to form sulfur trioxide during one of the key steps in sulfuric acid synthesis. An industrial chemist studying this reaction fills a 1.5 L flask with 0.59 atm of sulfur dioxide gas and 2.9 atm of oxygen gas at 35.0 °C. He then raises the temperature, and when the mixture has come to equilibrium measures the partial pressure of sulfur trioxide gas to be 0.53 atm.
Calculate the pressure equilibrium constant for the reaction of sulfur dioxide and oxygen at the final temperature of the mixture. Round your answer to 2 significant digits.
Kp=_______.
Answer:
P SO₂ = 0.06atm
P O₂ = 2.635atm
P SO₃ = 0.53atm
Kp = 29.6
Explanation:
The reaction of Sulfur dioxide and oxygen react to form sulfur trioxide is as follows:
2SO₂(g) + O₂(g) ⇄ 2SO₃(g)
And Kp is defined as:
[tex]Kp = \frac{P_{SO_3}^2}{P_{SO_2}^2P_{O_2}}[/tex]
Where P represents the pressure at equilibrium of each reactant.
If you add, in the first, 0.59atm of SO₂ and 2.9atm of O₂, the equilibrium pressures will be:
P SO₂ = 0.59atm - 2X
P O₂ = 2.9atm - X
P SO₃ = 2X
Where X represents the reaction coordiante.
As equilibrium pressure of SO₃ is 0.53atm:
0.53atm = 2X
0.265atm = X
Replacing, equilibrium pressures of each species will be:
P SO₂ = 0.59atm - 2×0.265atm
P O₂ = 2.9atm - 0.265atm
P SO₃ = 2×0.265atm
P SO₂ = 0.06atmP O₂ = 2.635atmP SO₃ = 0.53atmAnd Kp will be:
[tex]Kp = \frac{P_{SO_3}^2}{P_{SO_2}^2P_{O_2}}[/tex]
[tex]Kp = \frac{0.53^2}{{0.06}^2*{2.635}}[/tex]
Kp = 29.6For the reaction X + Y → Z, the reaction rate is found to depend only upon the concentration of X. A plot of 1/X verses time gives a straight line. What is the rate law for this reaction?
Answer:
r = k [X]²
Explanation:
X + Y → Z
Generally, the rate of reaction depends on the concentration of reactants. However, the question stated that the rate depends only on reactant X.
The plot of 1/X versus time giving a straight line signifies that this is a second order reaction.
For a second-order reaction, a plot of the inverse of the concentration of a reactant versus time is a straight line with a slope of k.
From this, our rate law is r = k [X]²
Balance the following redox reaction in acidic solution: H+(aq)+Zn(s)→H2(g)+Zn2+(aq) Express your answer as a chemical equation. Identify all of the phases in your answer. nothing
Answer:
The balanced equation is: Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)
Explanation:
Zn(s) is a simple substance (its oxidation number is zero) and it is oxidized to Zn²⁺. It loses two electrons, so the half reaction is the following:
Zn(s) → Zn²⁺(aq) + 2 e- (oxidation reaction)
Hydrogen ion (H⁺) is reduced to hydrogen gas (H₂). The oxidation number is decreased from +1 to 0 (because H₂ is a simple substance). H⁺ gains 1 electron per H atom, so the half reaction is the following:
2H⁺(aq) + 2 e- → H₂(g) (reduction reaction)
We obtain the overall reaction from the addition of the two half reactions. We write the reduction reaction first and then the oxidation reaction, as follows:
2H⁺(aq) + 2 e- → H₂(g)
+
Zn(s) → Zn²⁺(aq) + 2 e-
---------------------------------
Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)
The two electrons at both sides of the equation (2 e-) are canceled. The overall reaction is in acidic solution due to the presence of H⁺ ions. The net charge at both sides is the same : +2, so the mass and the charge are balanced.
A newly found element with the symbol J has two naturally occurring isotopes. Isotope one has an atomic mass of 139.905 amu and an abundance of 37.25%. Isotope two has an atomic mass of 141.709 amu and an abundance of 62.75%. Calculate the mass of the element.
Answer:
The mass of the element is 141.03701 amu
Explanation:
The catch here is that it notes a " newly found element. " Otherwise you could just refer to the average atomic mass of the element in the periodic table, and receive your solution in a much faster way.
The first isotope has an atomic mass of 139.905 amu, and a respective percent abundance of 37.25%. The second isotope has an atomic mass of 141.709 amu, and the remaining percent abundance, 100% - 37.25% = 62.75% ( given ). We can calculate the mass of the unknown element by associating each percentage with the mass of their respective isotope, over 100%.
Mass = ( ( 139.905 amu )( 37.25% ) + ( 141.709 amu )( 62.75% ) )/ 100,
Mass = ( ( 5211.46125 ) + ( 8892.23975 ) ) / 100,
Mass = ( 14103.701 ) / 100 = 141.03701 amu
AB2AB2 has a molar solubility of 3.72×10−4 M3.72×10−4 M. What is the value of the solubility product constant for AB2AB2? Express your answer numerically.
Answer:
Ksp = 2.06x10⁻¹⁰
Explanation:
For AB₂. solubility product constant, Ksp, is written as follows:
AB₂(s) ⇄ A²⁺ + 2Br⁻
Ksp = [A²⁺] [Br⁻]²
Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:
AB₂(s) ⇄ A²⁺ + 2Br⁻
AB₂(s) ⇄ X + 2X
where X are moles that are soluble (Molar solubility)
Ksp = [X] [2X]²
Ksp = 4X³As molar solubility of the salt is 3.72x10⁻⁴M:
Ksp = 4X³
Ksp = 4(3.72x10⁻⁴)³
Ksp = 2.06x10⁻¹⁰Which is a nonpolar molecule?
Answer:
Explanation:
A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite. Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
Find the amount of CO in the flask when the system returns to equilibrium.
Express your answer to two significant figures and include the appropriate units.
Answer:
0.44 moles
Explanation:
Given that :
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite.
The equilibrium constant [tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
The equilibrium constant [tex]K_c= \dfrac{(0.17 )(0.17)}{0.74}[/tex]
The equilibrium constant [tex]K_c= 0.03905[/tex]
Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
The equation for the reaction is :
[tex]H_2 + \dfrac{1}{2}O_2 \to H_2O \\ \\ 0.17 \ \ \ \ \ \ \ \ \ \to0.17[/tex]
Total mole of water now = 0.74+0.17
Total mole of water now = 0.91 moles
Again:
[tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
[tex]0.03905 = \dfrac{[0.17+x][x]}{[0.91 -x]}[/tex]
0.03905(0.91 -x) = (0.17 +x)(x)
0.0355355 - 0.03905x = 0.17x + x²
0.0355355 +0.13095 x -x²
x² - 0.13095 x - 0.0355355 = 0
By using quadratic formula
x = 0.265 or x = -0.134
Going by the value with the positive integer; x = 0.265 moles
Total moles of CO in the flask when the system returns to equilibrium is :
= 0.17 + x
= 0.17 + 0.265
= 0.435 moles
=0.44 moles (to two significant figures)
A saturated solution was formed when 5.16×10−2 L of argon, at a pressure of 1.0 atm and temperature of 25 ∘C, was dissolved in 1.0 L of water.
Calculate the Henry's law constant for argon. it must be im M/atm
Answer:
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
Explanation:
Henry's Law indicates that the solubility of a gas in a liquid at a certain temperature is proportional to the partial pressure of the gas on the liquid.
C = k*P
where C is the solubility, P the partial pressure and k is the Henry constant.
So, being the concentration [tex]C=\frac{ngas}{V}[/tex]
where ngas is the number of moles of gas and V is the volume of the solution, you must calculate the number of moles ngas. This is determined by the Ideal Gas Law: P*V=n*R*T where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. So [tex]n=\frac{P*V}{R*T}[/tex]
In this case:
P=PAr= 1 atmV=VAr= 5.16*10⁻² LR=0.082 [tex]\frac{atm*L}{mol*K}[/tex]T=25 °C=298 °KThen:
[tex]n=\frac{1 atm*5.16*10^{-2} L}{0.082 \frac{atm*L}{mol*K} *298K}[/tex]
Solving:
n= 2.11 *10⁻³ moles
So: [tex]C=\frac{ngas}{V}=\frac{2.11*10^{-3} moles}{1 L} =2.11*10^{-3} \frac{moles}{L}= 2.11*10^{-3} M[/tex]
Using Henry's Law and being C=CAr and P =PAr:
2.11*10⁻³ M= k* 1 atm
Solving:
[tex]k=\frac{2.11*10^{-3} M}{1 atm}[/tex]
You get:
[tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon gas in 1 litre of water is 2.1 × 10⁻³M/atm.
What is Henry's law?Henry's law of gas states that solubility of a gas in any liquid at particular temperature is directly proportional to the partial pressure of the gas.
C∝P
C = kP, where
k = Henry's constant
P = partial pressure of gas
C is the solubility and it is present in the form of concentration and will be calculated as:
C = n/V
n = no. of moles
V = volume
And moles of the gas will be calculated by using the ideal gas equation as:
PV = nRT
n = (1)(5.16×10⁻²) / (0.082)(298) = 2.1 × 10⁻³ moles
And Concentration in liquid will be:
C = 2.1 × 10⁻³mol / 1L = 2.1 × 10⁻³ M
Now we put all these values in the first equation to calculate the value of k as:
k = (2.1 × 10⁻³M) / (1atm) = 2.1 × 10⁻³M/atm
Hence required value of k is 2.1 × 10⁻³M/atm.
To know more about Henry's law, viist the below link:
https://brainly.com/question/12823901
Why are antiparallel beta sheets more stable than parallel beta sheets?
Answer:
The side chains of the amino acids alternate above and below the sheet
Explanation:
Hydrogen bonds are formed between the amine and carbonyl groups across strands. ... Antiparallel ß sheets are slightly more stable than parallel ß sheets because the hydrogen bonding pattern is more optimal.
how are mass and weight affected in chemical reactions?
Answer:
How the chemical reacts
Explanation:
Calculate the entropy change for the reaction: HCl(g) + NH3(g) -> NH4Cl(s) Entropy data: HCl: 187 J/K mol NH3: 193 J/K mol NH4Cl: 94.6 J/K mol
Answer:
-285.4 J/K
Explanation:
Let's consider the following balanced equation.
HCl(g) + NH₃(g) ⇒ NH₄Cl(s)
We can calculate the standard entropy change for the reaction (ΔS°r) using the following expression.
ΔS°r = 1 mol × S°(NH₄Cl(s)) - 1 mol × S°(HCl(g)) - 1 mol × S°(NH₃(g))
ΔS°r = 1 mol × 94.6 J/K.mol - 1 mol × 187 J/K.mol - 1 mol × 193 J/K.mol
ΔS°r = -285.4 J/K
Answer:
-198.3 J/K mol
Explanation:
I got it correct on founders edtell
Balance the following
Na+02-→ Na20
Al+O2 ->Al2O3
H2+12+ ->HI
Mg+H2O → Mg(OH)2+H2
Ca+O2 -> Cao
Answer:
1. Na + O2 → Na2O (Balanced)
2. 4Al + 3O2 → 2(Al2O3) (Balanced)
3. H2 + i2 → 2HI (Balanced)
4. Mg + 2H2O → Mg(OH)2+ H2 (Balanced)
5. 2Ca +O2 → 2CaO (Balanced)
* Question Completion Status:
QUESTION 1
'What compound represents conjugate base in the following chemical reaction? H2SO4 + H2O HSO4 + H30+
O a. H2SO4
O b. H2O
O c. HSO4
O d. H30+
Answer: b. HSO4-
Explanation:
H2SO4 (sulfuric acid) will donate a hydrogen ion in solution to form H3O+(hydronium). The remaining HSO4- would be the conjugate base of this dissociation.
A conjugate base contains one less H atom and one more - charge than the acid that formed it.
A conjugate acid contains one more H atom and one more + charge than the base that formed it.
How many atoms of hydrogens are found in 3.21 mol of
C3H8?
Answer:
1.55 × 10²⁵ atoms of H
Explanation:
3.21mol C₃H₈ × 8mol H × (6.022×10²³)
Draw the Lewis structure for methane (CH4) and ethane (C2H6) in the box below. Then predict which would have the higher boiling point. Finally, explain how you came to that conclusion.
Answer:
Ethane would have a higher boiling point.
Explanation:
In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.
Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.
I hope it helps!
The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.
We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.
We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.
Learn more: https://brainly.com/question/2510654
Aspirin (C9H8O4) is produced by the reaction of salicylic acid (C7H6O3, Molar mass = 138.1 g/mol) and acetic anhydride (C4H6O3, Molar mass = 102.1 g/mol) based on the BALANCED equation : C7H6O3(s) + C4H6O3(l ) → C9H8O4(s) + C2H4O2( l) If 63.07 grams of aspirin (Molar mass = 180.2 g/mol) was collected from an experiment when 138.1 grams C7H6O3 reacted with excess C4H6O3, what was the percent yield?
Answer:
35%
Explanation:
Percentage yield = actual yield / theoretical yield × 100.
Given:
Actual yield = 63.07g
Theoretical yield = ?
Mole ratio of C7H6O3 to C4H6O3 = 1 : 1
1 mole of C7H6O3 - 138.1g
Which implies that only 1 mole s[tex]\frac{63.07}{180.2} * 100[/tex]hould be used up in the reaction, yielding 180.2 g of C9H8O4. ⇒ Theoretical yield = 180.2g
∴ % Yield = [tex]\frac{63.07}{180.2} * 100[/tex]
= 35% yield.
Let me know if you found this easy to understand.
Which relationship can be used to aid in the determination of the heat absorbed by bomb calorimeter? 
Answer:
ΔH = [tex]q_{p}[/tex]
Explanation:
In a calorimeter, when there is a complete combustion within the calorimeter, the heat given off in the combustion is used to raise the thermal energy of the water and the calorimeter.
The heat transfer is represented by
[tex]q_{com}[/tex] = [tex]q_{p}[/tex]
where
[tex]q_{p}[/tex] = the internal heat gained by the whole calorimeter mass system, which is the water, as well as the calorimeter itself.
[tex]q_{com}[/tex] = the heat of combustion
Also, we know that the total heat change of the any system is
ΔH = ΔQ + ΔW
where
ΔH = the total heat absorbed by the system
ΔQ = the internal heat absorbed by the system which in this case is [tex]q_{p}[/tex]
ΔW = work done on the system due to a change in volume. Since the volume of the calorimeter system does not change, then ΔW = 0
substituting into the heat change equation
ΔH = [tex]q_{p}[/tex] + 0
==> ΔH = [tex]q_{p}[/tex]
Write the electron configuration for the element titanium, TiTi. Express your answer in order of increasing orbital energy as a string without blank space between orbitals. For example, the electron configuration of LiLi could be entered as 1s^22s^1 or [He]2s^1.
Answer:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d² or [Ar] 3d² 4s²
Explanation:
Electron configuration can basically be referred to as the location of electron; how the electrons are arranged in the orbitals of the atoms.
Following Aufbau principle, electrons are arranged in the following order of orbitals.
1s 2s 2p 3s 3p 4s 3d and so on.
The s can hold a maximum of 2 electrons, p can hold a maximum of 6 electrons and d can hold a maximum of 10 electrons.
Titanium has an atomic number of 22. So the arrangement is given as;
Ti = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d²
The short hand notation is given as;
[Ar] 3d² 4s²
The electron configuration of Ti is
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex] or [tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
The electron configuration of an element is the distribution of electrons in atomic orbitals.
According to Aufbau's principle, the orbitals with lower energies are filled before the orbitals with higher energies.
We can know this order, using the diagonal rule (attached image).
The maximum number of electrons in each sublevel is:
s = 2p = 6d = 10f = 14Considering all these facts, and that Titanium has 22 electrons, the electron configuration of Ti is:
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex]
Since [tex]1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6}[/tex] is the electron configuration of Argon, this can also be written as:
[tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
The electron configuration of Ti is
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex] or [tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
Learn more: https://brainly.com/question/21940070
What is the molar concentration of H atoms at equilibrium if the equilibrium concentration of H2 is 0.28 M? Express your answer to two significant figures and include the appropriate units.
Answer:
0.56M
Explanation:
Molar concentration is defined as the ratio between moles of solute and volume in liters of solution.
In a 0.28M H₂ there are 0.28moles of H₂ per liter of solution.
Now, in 1 molecule of H₂ there are 2 atoms of H. Following this idea, in 0.28 moles of H₂ there are 0.28*2 = 0.56 moles of H atoms.
Thus, molar concentration of H atoms in a 0.28M H₂ is 0.56M