Answer:
mitochondria is responsible for energy
Put the following words in order from SMALLEST to LARGEST
Tissue, Organelle, Organ System, Cell, Organism, Organ
What is the highest level of complexity for a single celled organism?
Answer:
Amoeba since it can come together as a multicellular with other amoebas, but still act as one giant living cell.
Explanation: i read in a book that red-slime molds can do that. hope it wasn't too far too late recent.
The Ideal Gas Law is as follows: PV = nRT.
Rearrange the equation for each variable.
P =
V=
n =
R=
T =
Answer:
p=nRT/V
v=nRT/P
n=PV/RT
t=PV/nR
What is the energy transformation from wind to usable energy
Answer:
A turbine takes the kinetic energy of a moving fluid, air in this case, and converts it to a rotary motion.
Explanation:
While milk is produced naturally by cows, the milk that we buy in the supermarket has been subjected to a number of different processes such as pasteurisation (which sterilises it) and homogenisation (which mixes the cream and the milk together uniformly). Would you describe milk as natural or processed? Explain your answer.
Answer:
Explanation:
Ultimately, milk can be described as both. The actual description depends on the individual and/or company involved. For example, in many places milk if extracted from cows, bottled, and delivered to the end consumer. In this case, milk would be considered as natural because nothing has been done to change its nutritional composition. This changes when companies begin to pasteurise and homogenize the milk so that it has a longer shelf life and create different variations. The milk in this case no longer has the same nutritional composition and has been altered, and is therefore considered as processed.
how many moles of KCIO3 are required to produce 58.3 grams of 02?
2 KCIO3 —> 2 KCI + 3 O2
Answer:
1.21 mol KClO₃
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesMole RatioStoichiometry
Analyzing reactions rxnUsing Dimensional AnalysisExplanation:
Step 1: Define
Identify variables
[rxn] 2KClO₃ → 2KCl + 3O₂
[Given] 58.3 g O₂
[Solve] mol KClO₃
Step 2: Identify Conversions
[rxn] 2 mol KClO₃ → 3 mol O₂
[PT] Molar Mass of O: 16.00 g/mol
Molar Mass of O₂: 2(16.00) = 32.00 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 58.3 \ g \ O_2(\frac{1 \ mol \ O_2}{32.00 \ g \ O_2})(\frac{2 \ mol \ KClO_3}{3 \ mol \ O_2})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 1.21458 \ mol \ KClO_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
1.21458 mol KClO₃ ≈ 1.21 mol KClO₃
Sulfur trioxide, ammonia gas, and water will react to form ammonium sulfate. Determine the
percent yield when 3.78 g of ammonium sulfate forms from the reaction of 2.51 g of sulfur
trioxide, 1.55 g of ammonia, and 0.804 g of water.
Answer:
Explanation:
Sulfur trioxide, ammonia gas, and water will react to form ammonium sulfate. Determine the percent yield when 3.78 g of ammonium sulfate forms from the reaction of 2.51 g of sulfur trioxide, 1.55 g of ammonia, and 0.804 g of water. Can you please show step by step on how you got the answer thanks!
-
First, the balanced equation:
1 SO3 + 2 NH3 + 1 H2O --> 1 (NH4)2SO4
Find the limiting reactant using molar masses and mole ratios
2.51 g SO3 (1 mol SO3 / 80.06 g SO3) (1 mol (NH4)2SO4 / 1 mol SO3) = 0.03135 mol (NH4)2SO4
1.55 g NH3 (1 mol NH3 / 17.04 g NH3) (1 mol (NH4)2SO4 / 2 mol NH3) = 0.04548 mol (NH4)2SO4
0.804 g H2O (1 mol H2O / 18.02 g H2O) (1 mol (NH4)2SO4 / 1 mol H2O) = 0.04462 mol (NH4)2SO4
Therefore, the limiting reactant is sulfur trioxide.
Now find the theoretical yield of (NH4)2SO4.
2.51 g SO3 (1 mol SO3 / 80.06 g SO3) (1 mol (NH4)2SO4 / 1 mol SO3) (132.16 g (NH4)2SO3 / 1 mol (NH4)2SO4) = 4.14 g (NH4)2SO4
Actual yield / Theoretical yield x 100% = Percent yield.
Therefore, percent yield = 91.3%
hoppe it helps
Sulfur trioxide, ammonia gas, and water will react to form ammonium sulfate. Hence,the percent yield is 91.3%.
What is percent yield ?
The percentage yield displays the amount of product produced in relation to the maximum mass. The proportion of atoms in the reactants that go on to produce the intended product is determined by the reaction's atom economy.
The balanced chemical equation is as follows:
1 SO3 + 2 NH3 + 1 H2O ⇒ 1 (NH4)2SO4
Find the limiting reactant by using molar masses and mole ratios as follows:
2.51 g SO3 (1 mol SO3 / 80.06 g SO3) (1 mol (NH4)2SO4 / 1 mol SO3)
= 0.03135 mol (NH4)2SO4
1.55 g NH3 (1 mol NH3 / 17.04 g NH3) (1 mol (NH4)2SO4 / 2 mol NH3)
= 0.04548 mol (NH4)2SO4
0.804 g H2O (1 mol H2O / 18.02 g H2O) (1 mol (NH4)2SO4 / 1 mol H2O)
= 0.04462 mol (NH4)2SO4
Hence, the limiting reactant is sulfur trioxide.
Then, find the theoretical yield of (NH4)2SO4.
2.51 g SO3 (1 mol SO3 / 80.06 g SO3) (1 mol (NH4)2SO4 / 1 mol SO3) (132.16 g (NH4)2SO3 / 1 mol (NH4)2SO4)
= 4.14 g (NH4)2SO4
Actual yield / Theoretical yield x 100% = Percent yield.
percent yield = 91.3%
Thus, the percent yield is 91.3%.
To learn more about the percent yield, follow the link;
https://brainly.com/question/17042787
#SPJ2
Why do nurses need to understand chemistry?
A. Chemistry helps them understand how germs transmit disease.
B. Chemistry helps them keep accurate health records.
C. Chemistry helps them understand how medicines work.
D. Chemistry helps them learn the parts of the body.
Option D. Chemistry helps them learn the parts of the body is the reason need to understand chemistry.
Why do nurses need to understand chemistry?
Chemistry exists as the branch of science that contracts with the properties, composition, and arrangement of elements and compounds, how they can vary, and the energy that exists released or absorbed when they change.
Nurses must utilize organic chemistry to determine how the bodies of their patients metabolized glucose, and how the body responds to it. On a more complex level, nurses must cause conclusions based on their knowledge of organic chemistry to help protect the lives of their patients.
Hence, Option D. Chemistry helps them learn the parts of the body is the reason need to understand chemistry.
To learn more about Uses of organic chemistry refer to:
https://brainly.com/question/24175552
#SPJ2
Classify the type of reaction between aluminum solid and oxygen gas.
I need the answer fast plzzz!! NO LINKS
Answer:
your answer is 12 hope it's correct answer
A 0.520 g sample of an unknown nonelectrolyte compound is dissolved in 4.12 g of lauric acid (Kf = 3.90 °C/m). The freezing point depression is determine to be 4.20 °C. What is the molar mass of the compound?
The molar mass of the unknown nonelectrolyte compound is
Using the formula;
∆T = K m i
Where;
K = freezing point depression constant
m = molality of the solution
i = Van't Hoft factor
Note that i = 1 since the compound is a nonelectrolyte.
To find molality;
Number of moles = 0.520 g/Molar mass
Let the molar mass of the unknown compound be MM
Number of moles = 0.520 g/MM
Number of kilograms of solvent = 4.12 g/1000 = 0.00412 Kg
Molality = 0.520 g/MM * 1/0.00412 Kg
Freezing point depression is 4.20 °C
To find the molar mass of the compound;
4.20 °C = 3.90 °C/m * 0.520 g/MM * 1/0.00412 Kg
4.20 = 492.23/MM
MM = 492.23/4.20
MM = 117.19 g/mol
Learn more; https://brainly.com/question/14762341
The specific heat capacity of concrete is 0.880 J/g °C
Calculate the heat added to 3 g of concrete if the temperature increased by 0.64 °C
Use the equation q=mcT
If you can please show work thanks
Answer:
this is a required answer. look it once.
HELP ME WITH ONE OR BOTH OF THESE QUEATIONS PLEASEEEE
Answer:
2. 181.25 K.
3. 0.04 atm.
Explanation:
2. Determination of the temperature.
Number of mole (n) = 2.1 moles
Pressure (P) = 1.25 atm
Volume (V) = 25 L
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =?
The temperature can be obtained by using the ideal gas equation as illustrated below:
PV = nRT
1.25 × 25 = 2.1 × 0.0821 × T
31.25 = 0.17241 × T
Divide both side by 0.17241
T = 31.25 / 0.17241
T = 181.25 K
Thus, the temperature is 181.25 K.
3. Determination of the pressure.
Number of mole (n) = 10 moles
Volume (V) = 5000 L
Temperature (T) = –10 °C = –10 °C + 273 = 263 K
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =?
The pressure can be obtained by using the ideal gas equation as illustrated below:
PV = nRT
P × 5000 = 10 × 0.0821 × 263
P × 5000 = 215.923
Divide both side by 5000
P = 215.923 / 5000
P = 0.04 atm
Thus, the pressure is 0.04 atm
How many hydrogen atoms are found in the
hydrate (NH4)3PO4.5H2O?
Answer:
22
Explanation:
3x4+ 5x2
Is 1 mole of Na equal or not equal to Avogadro's number?
Answer:
nooooo it is not equal to it
An experiment was conducted and students observed that a solution had a hydroxide concentration of 7.0 x 10-2 .What is the pH? is the substance acidic or basic?
Answer:
The pH of the solution is basic
Explanation:
as one of the characteristics of the base is to increase the OH concentration in a solution so if the solution has low concentration of OH this means that the solution is basic
1. Determinati masa moleculara, raportul atomic si raportul de masa pentru oxidul de aluminiu 2. Determinati compozutia procebtuala al hidroxidului de sofiu sau sofa cauxica, 3. Determinati ce cantitate calciu este cuprinds in 112 grame oxid de calciu 4. Determinati ce cantiate de sulf in 490 de grame de acid sulfuric
Answer:
im solving now
Explanation:
A student believes that a solution of potassium chromate should be insoluble
because chromate ions form insoluble compounds. Explain why the student is
incorrect.
Answer:
All ionic compounds with alkali metals are soluble.
Explanation:
Certain elements always form soluble substances. Most of those elements are alkali metals/group 1 metals.
HELPPPPPP ASAP FDHTRFHBGFB
Answer:
is your answe b?
Explanation:
Im really asking
Which is the function of protein macromolecule?
This chemical reaction follows the law of conservation of mass. CaO(s) + CO2(g) - CaCO3(s) How much CaCO, will be formed if 2.2 grams of CaO are used for this reaction? Assume there are enough reactants to complete the reaction. The final answer should be rounded to one place after the decimal point.
4.3 grams 2.2 grams 1.1 grams 3.9 grams
please answer quick!
Answer:
the answer is 1.1grams is the currect ans
According to the law of conservation of mass, 1.1 grams of calcium carbonate are formed if 2.2 grams of CaO are used for this reaction.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.If 56 g CaO gives 46.2 g calcium carbonate then 2.2 g CaO will give 2.2×46.2/56=1.1 g.
Learn more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ6
Please help. Very Confused. No links and need explanation please!
Label the highlighted substance with the term that best describes its behavior.
Answer Choices:
Arrhenius Acid Only
Arrhenius Base Only
Bronsted Lowry Acid Only
Bronsted Lowry Base Only
Both Arrhenius Acid and Bronsted Lowry Acid
Both Arrhenius Base and Bronsted Lowry Base
Answer:
Both Arrhenius Base and Bronsted Lowry Base
Both Arrhenius Acid and Bronsted Lowry Acid
Arrhenius Acid Only
Arrhenius Base Only
Bronsted Lowry Acid Only
Bronsted Lowry Base Only
Explanation:
write an equation for hydrogen sulphide in aqueous solution
Answer:
This is hard because I don’t know the answer
Explanation:
I just need points
When choosing a respirator for your job, you must conduct a _____ test.
A) Weight
B) Breathing
C) Fit
D) Practice
A stock solution of calcium sulfate, CaSO4 has a concentration of 3.00 M. The volume of this solution is 150 mL. What volume of a 1.25 M solution could be made from the stock solution?
Answer: The volume of stock solution needed is 62.5 mL
Explanation:
A solution consists of solute and solvent. A solute is defined as the component that is present in a smaller proportion while the solvent is defined as the component that is present in a larger proportion.
To calculate the volume of stock solution needed, the formula used is:
[tex]C_1V_1=C_2V_2[/tex] ....(1)
where,
[tex]C_1\text{ and }V_1[/tex] are the concentration and volume of stock solution.
[tex]C_2\text{ and }V_2[/tex] are the concentration and volume of diluted solution.
We are given:
[tex]C_1=3.00M\\V_1=?mL\\C_2=1.25M\\V_2=150mL[/tex]
Putting values in equation 1, we get:
[tex]3.00\times V_1=1.25\times 150\\\\V_1=\frac{1.25\times 150}{3.00}\\\\V_1=62.5mL[/tex]
Hence, the volume of stock solution needed is 62.5 mL
Se encuentra en los animales marinos, es un gas incloro de olor desagradable muy parecido al del pescado podrido
Answer:
Metilaminas
Explanation:
Las metilaminas a menudo están presentes en los tejidos corporales de organismos marinos como crustáceos, moluscos y en todos los peces marinos como N-óxido de trimetilamina, donde actúan para estabilizar la proteína que se desestabiliza por la presión y también se cree que actúa como un depresor del punto de congelación. en peces polares
Las metilaminas tienen olor a pescado podrido, basura o huevos podridos, de modo que una acumulación de metilamina en el cuerpo da como resultado la liberación de un olor a pescado en la amplitud, el sudor y la orina de un individuo
answer 3 & 4
Which of the following answer describes 2-hexene? *
O structure should have 5 carbon with double bond beginning on the 2nd carbon atom
O structure should have 6 carbon with triple bond beginning on the 2nd carbon atom
O structure should have 6 carbon with double bond beginning on the 2nd carbon atom
O structure should have 5 carbon with triple bond beginning on the 2nd carbon atom
Answer:
The answer for 2-hexene is that the structure should have 6 carbon with a double bond beginning on the 2nd carbon atom.
The answer for 1-pentyne is that the structure should have 5 carbon with triple bond beginning on the 1st carbon atom.
Explanation:
2-Hexene
The structural formula for 2-hexene will have 6 carbons because the nomenclature has a -hex prefix, which stands for 6 carbons.
The -ene suffix of the nomenclature means that the organic compound is an alkene. Alkenes are hydrocarbons that contain double covalent bond and have the suffix -ene.
The double bond is on the 2 carbon atom because the nomenclature states that the double bond will be on the 2 carbon atom.
1-Pentyne
The structure will have 5 carbons since the -pent prefix means 5 carbons.
The structure has a triple bond because the -yne suffix means that the structure is an alkyne. An alkyne is a hydrocarbon with triple covalent bonds.
Also, the position of the triple bond is known because the nomenclature of the alkyne states that the triple bond is on the 1st carbon.
If the limiting reactant in a chemical reaction is impure, what will happen to the percentage yield of the product?
Answer:
it may also become impure,I think.
A company known as arten industries is wanting to build a factory in the watershed that is pictured
What is another term for a Static Load?
Answer: static charge
Explanation:
Answer:
Explanation:
static load, also called the holding load, is the force that will be applied to the linear actuator when it is not in motion.