Answer:
Freezing
Explanation:
When a liquid goes to a solid, this process is called freezing.
Answer:
The water molecules get condensed and form a solid matter called ice. This process is called Condensation.
4. What is the specific heat of a substance if 5800 joules is
released in a 250 gram sample that will cool the substance from
60 degrees to 45 degrees?
Answer: 23.2
Explanation:
The human body can get energy by metabolizing proteins, carbohydrates or fatty acids, depending on the circumstances. Roughly speaking, the energy it gets comes mostly from allowing all the carbon atoms in the food molecules to become oxidized to carbon dioxide CO2 by reaction with oxygen from the atmosphere. Hence the energy content of food is roughly proportional to the carbon content.
Let's consider alanine, C3H7NO2, one of the amino acids from which proteins are made, and glucose C6H12O6, one of the simplest carbohydrates. Using the idea above about energy content, calculate the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose.
Answer:
the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose is 1.0111
Explanation:
Given the data in the question;
To determine the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose, first we get the molar masses of both alanine and glucose
we know that;
Molar mass of alanine ( C₃H₇NO₂ ) = 89.09 g/mol
Molar mass of glucose ( C₆H₁₂O₆ ) = 180.16 g/mol
now, { metabolizing each gram }
moles of alanine = mass taken / molar mass
= 1g / 89.09 g/mol = 1/89.09 moles
moles of glucose = mass taken / molar mass
= 1g / 180.16 g/mol = 1/180.16 moles
In each molecule of alanine, we have 3 atoms of carbon.
Also, in each molecules of glucose, we have 6 atoms of carbon
so,
number of moles of Carbons in alanine = 3 × 1/89.09 moles = 0.03367
number of moles of Carbons in glucose = 6 × 1/180.16 moles = 0.0333
so ratio of energy will be the ratio of carbon atoms, which is;
⇒ 0.03367 / 0.0333 = 1.0111
Therefore, the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose is 1.0111
A severe storm would be most likely to damage a coastal area by causing
A.
volcanoes.
B.
pollution.
C.
erosion.
D.
earthquakes.
A severe storm would be most likely to damage a coastal area by causing pollution. Therefore, the correct option is option B.
What is coastal area?The region where land joins the ocean, or even as a line defining the border between the land as well as the shoreline, is known as the coast, sometimes referred as the coastline and seashore. The terrain of the area's surroundings has an impact on shorelines, as do water-induced erosion processes like wave action.
The length of the shoreline on Earth is about 620,000 kilometers. Natural ecosystems' coasts are significant zones and frequently the site of a diverse range of biodiversity. They are home to significant ecosystems on land, such as freshwater and estuarine wetlands, that are crucial for the survival of bird populations or other land animals. A severe storm would be most likely to damage a coastal area by causing pollution.
Therefore, the correct option is option B.
To know more about coastal area, here:
https://brainly.com/question/14105067
#SPJ3
how many moles of nitrogen gas are produced in the reaction if we started with 6 moles of ammonium nitrate
Whoever gets these 2 right gets brainliest! :)
the first one is A covalent bond.
the second one is Answer: B Decomposition
If you began a reaction with the following ions in solution, what would be the net ionic equation?
Na+, PO43–, Fe2+, and NO3–
Answer:
2 PO₄³⁻(aq) + 3 Fe²⁺(aq) ⇒ Fe₃(PO₄)₂
Explanation:
Let's consider the complete ionic equation between the ions present. It includes all the ions and the insoluble compounds (Fe₃(PO₄)₂ is insoluble).
Na⁺(aq) + 2 PO₄³⁻(aq) + 3 Fe²⁺(aq) + NO₃⁻(aq) ⇒ Fe₃(PO₄)₂ + Na⁺(aq) + NO₃⁻(aq)
The net ionic equation includes only the ions that participate in the reaction (not spectator ions) and the insoluble compounds.
2 PO₄³⁻(aq) + 3 Fe²⁺(aq) ⇒ Fe₃(PO₄)₂
adaptive features of aquatic plants
Use the solubility rules from the Lab 4 introduction and your knowledge of qualitative separation schemes from the lab to answer the following questions. The qualitative analysis experiment you did is actually an abbreviated version of a much larger analysis scheme in which many different cations are separated and identified. Suppose a mixture contains Ag , K , NH4 , Hg22 , Pb2 , Mg2 , Sr2 , Ba2 , Cu2 , Al3 and Fe3 .
(a) Which of the following ions could you separate, by causing them to precipitate, with the addition of HCl?
Ag+ K+ NH4+
Hg22+ Pb2+ Mg2+
Sr2+ Ba2+ Cu2+
Al3+ Fe3+
(b) After the addition of HCl, the above sample is centrifuged and decanted. Which of the following cations remaining in the supernatant could you separate, by causing them to precipitate, with the addition of H2SO4? (Hint: H2SO4 is a source of sulfate ions. Select all that apply.)
Ag+ K+ NH4+
Hg22+ Pb2+ Mg2+
Sr2+ Ba2+ Cu2+
Al3+ Fe3+
Answer:
a13+a13
Explanation:
Do you think humans are responsible for global warming trends? Why or why not?
Answer:
Yes. At least some. There has been ups and downs in temperature ever since the Earth was created, and this is just another up in temperature. I do think that humans have made it worse though, with all of the greenhouse gases and things like that.
what is the structure of methane
Answer:
CH4
Explanation:
if it is wrong, i blame my brain
Which of the following statements best describes the number of neutrons in an atom?
It is the same as the element's atomic number.
It is equal to the sum of atomic number and average atomic mass.
it is the same as the average atomic mass.
it is equal to the difference between atomic number and atomic mass number.
Answer:
its the last one
Explanation:
How many atoms are in 90.43 moles of copper
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 8.12×10²³ atoms are in 90.43 mole of copper.
What is mole?
The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole.
we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number
number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)
number of moles of copper=90.43 moles
Substituting all the given values in the above equation, we get
number of atoms/molecules= 90.43 × 6.022×10²³
number of atoms/molecules=8.12×10²³ molecules
Therefore, 8.12×10²³ atoms are in 90.43 mole of copper.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
A student plans a two-step synthesis of 1-ethyl-3-nitrobenzene from benzene. The first step is nitration of benzene to give nitrobenzene, and the second step is a Friedel-Crafts alkylation using CH3CH2Cl and AlCl3. The plan is flawed because: A : When the alkyl halide interacts with AlCl3, the resulting carbocation can rearrange before it has a chance to react with the aromatic ring. B : Nitrobenzene is too deactivated (by the nitro group) to undergo a Friedel-Crafts alkylation. C : The nitro group will direct the incoming alkyl group para position, rather than to the meta position. D : A blocking group is required to achieve this synthesis.
Answer:
Nitrobenzene is too deactivated (by the nitro group) to undergo a Friedel-Crafts alkylation.
Explanation:
The benzene ring in itself does not easily undergo electrophilic substitution reaction. Some groups activate or deactivate the benzene ring towards electrophilic substitution reactions.
-NO2 ia a highly deactivating substituent therefore, Friedel-Crafts alkylation of nitrobenzene does not take place under any conditions.
This reaction scheme is therefore flawed because Nitrobenzene is too deactivated (by the nitro group) to undergo a Friedel-Crafts alkylation.
An empty steel container is filled with 2.0 atm of H₂ and 1.0 atm of F₂. The system is allowed to reach equilibrium according to the reaction below. If Kp = 0.45 for this reaction, what is the equilibrium partial pressure of HF?
The equilibrium partial pressure of HF is 0.55 atm.
The equation of the reaction is;
H2(g) + F2(g) ⇄ 2HF
I 2 1 0
C -x -x +x
E 2 - x 1 - x x
We know that;
pH2 = 2.0 atm
PF2 = 1.0 atm
pHF = ??
Kp = 0.45
So;
Kp = (pHF)^2/pH2. pF2
0.45 = x^2/(2 - x) (1 - x)
0.45 = x^2/x^2 - 3x + 2
0.45(x^2 - 3x + 2) = x^2
0.45x^2 - 1.35x + 0.9 = x^2
0.55 x^2 + 1.35x - 0.9 = 0
x = 0.55 atm
Learn more about equilibrium: https://brainly.com/question/3980297
Suppose an EPA chemist tests a 250.mL sample of groundwater known to be contaminated with nickel(II) chloride, which would react with silver nitrate solution like this: NiCl2(aq) + 2AgNO3(aq) → 2AgCl(s) + NiNO32(aq) The chemist adds 15.0mM silver nitrate solution to the sample until silver chloride stops forming. He then washes, dries, and weighs the precipitate. He finds he has collected 5.8mg of silver chloride. Calculate the concentration of nickel(II) chloride contaminant in the original groundwater sample. Round your answer to 2 significant digits.
Answer:
0.0010 w/v %
Explanation:
Based on the reaction:
NiCl₂(aq) + 2AgNO₃(aq) → 2AgCl(s) + Ni(NO₃)₂(aq)
Finding the moles of AgCl produced we can find the moles of NiCl in the reaction medium and its mass:
Moles AgCl -Molar mass: 143.32g/mol-:
5.8mg = 5.8x10⁻³g * (1mol / 143.32g) = 4.047x10⁻⁵ moles AgCl
Moles NiCl₂:
4.047x10⁻⁵ moles AgCl * (1mol NiCl₂ / 2mol AgCl) = 2.023x10⁻⁵ moles NiCl₂
Mass NiCl₂ -Molar mass: 129.60g/mol-:
2.023x10⁻⁵ moles NiCl₂ * (129.60g / mol) = 2.62x10⁻³g of NiCl₂ are produced.
And the concentration in w/v% is:
2.62x10⁻³g NiCl₂ / 250mL * 100 =
0.0010 w/v %What enzyme catalyses the reaction of PRPP transfer to hypoxanthine with
formation of IMP?
Answer:
HPRT
Explanation:
HPRT catalyzes the salvage reactions of hypoxanthine and guanine with PRPP to form IMP and GMP
The formation of GMP from IMP requires oxidation at C-2 of the purine ring, followed by a glutamine-dependent amidotransferase reaction that replaces the oxygen on C-2 with an amino group to yield 2-amino,6-oxy purine nucleoside monophosphate, or as this compound is commonly known, guanosine monophosphate.
How many grams equal 4.3 x 1024 atoms of oxygen (02)?
Answer: 248.66g
Explanation:
4.3e24 / 6.23e23 = 6.9 mols O2
6.9(18.02*2)=248.66
Draw the structure formula for
1-ethyl-2,3-dimethylbenzene
Please help me
Answer:
Please see the attached picture.
Explanation:
1) Draw a benzene ring
2) On the first carbon, add a CH₂CH₃ (known as ethyl) since its location number is 1.
3) 'Dimethyl' refers to 2 methyl (CH₃) branches. The location numbers are 2 and 3, thus add a CH₃ on the 2nd and 3rd carbons.
If you have 9.56 moles of aluminum oxide how many moles of sodium oxide could you produce?
Answer:
The answer is 28.68 moles
Explanation:
Hope this helped Mark BRAINLEST!!!
Please someone help me with this!!
PLEASE HELP IMMEDIATE WORTH 10 POINTS
Fill in the blank with the word or phrase that best completes the statement or answers the question. The scientific name for a plant that reproduces with flowers is a(n)
Answer:
the scientific name is Angiosperms
Explanation:
please mark brainliest
At what minimum temperature do rocks melt into lava?
A) 3,500 degrees Celsius
B) 6,332 degrees Fahrenheit
C) 800 degrees Fahrenheit
OD 800 degrees Celsius
The type of potential energy related to an object's height
Answer:
the answer is gravitational potential energy
Answer:
Since the gravitational potential energy of an object is directly proportional to its height above the zero position, a doubling of the height will result in a doubling of the gravitational potential energy. A tripling of the height will result in a tripling of the gravitational potential energy.
Explanation:
Hope this helps?
Which change represents an oxidation reaction?
hi, if your looking for extra points (50+) and br ainiest here is ur chance, answer this question correctly plz
number of molecules in lithium sulfate Li2So4
Fill in the blanks. 3NH3
Answer:
3, 9, 3
Explanation:
The coefficient of 3 tells us that there are three molecules (the chemical unit of NH3). Each molecule of ammonia (NH3) is made up of 1 atom of nitrogen bonded to 3 atoms of hydrogen.
Since there are three molecules, we have three times the amount of atoms there are in one molecule.
3 x 1 = 3 nitrogen
3 x 3 = 9 hydrogen
Calculate the pH of each of the following aqueous solutions. (Enter your answers to two decimal places.) (a) 10.0 mL deionized water WebAssign will check your answer for the correct number of significant figures. 2.72 Incorrect: Your answer is incorrect. (b) 10.0 mL deionized water plus 5.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures. (c) 10.0 mL deionized water plus 10.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures. (d) 10.0 mL deionized water plus 15.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures.
Answer:
a. pH = 7.0
b. pH = 12.52
c. pH = 12.70
d. pH = 12.78
Explanation:
a. Deionized water has the [H⁺] of pure water = 1x10⁻⁷ (Kw = 1x10⁻¹⁴ = [H⁺][OH⁻] - [H⁺] = [OH⁻ -)
pH = -log[H⁺] = 7
b. Moles NaOH = 5x10⁻³L * (0.10mol / L) = 5x10⁻⁴moles OH⁻ / 0.015L = 0.0333M = [OH⁻]
-Total volume = 10mL+5mL = 15mL = 0.015L
pOH = -log[OH⁻] = 1.48
pH = 14-pOH
pH = 12.52
c. Moles NaOH = 0.010L * (0.10mol / L) = 1x10⁻³moles OH⁻ / 0.020L = 0.0500M = [OH⁻]
-Total volume = 10mL+10mL = 20mL = 0.020L
pOH = -log[OH⁻] = 1.30
pH = 14-pOH
pH = 12.70
d. Moles NaOH = 0.015L * (0.10mol / L) = 1.5x10⁻³moles OH⁻ / 0.025L = 0.060M = [OH⁻]
-Total volume = 10mL+15mL = 25mL = 0.025L
pOH = -log[OH⁻] = 1.22
pH = 14-pOH
pH = 12.78
Name the functional group in the
following molecule:
HSCH2CH3
A. alkane
B. amide
C. thiol
D. alkyl halide
Answer:
C. thiol
Explanation:
Answer:
it's C thiol I just took the test
hope this helps
have a good day :)
Explanation:
Lithium and nitrogen react to produce lithium nitride:
6Li (s) + N2 (g) = 2Li3N (s)
How many moles of lithium nitride are produced when 0.400 mol lithium are used in this reaction?
a. 1.28 mol
b. 0.133 mol
c. 0.800 mol
d. 0.0667 mol
Answer:
B : 0.133 M
Explanation:
moles Li3N3 = 0.4 mol Li x (2 moles Li3N/6 moles Li) = 0.133 M