Which best describes the act of using senses or tools to gather information? creating a hypothesis making an observation summarizing the results recording the measurements

Answer:

Homoanular dienes have a greater base value than heteroanular dienes

Explanation:

Woodward in 1945 gave a set of rules relating the wavelength of maximum absorption to the structure of a compound. These rules were modified by Fieser in 1959. These sets of rules describe the absorption of organic molecules in the UV region of the electromagnetic spectrum.

Each system of diene or triene has a given fixed value at which maximum absorption is expected to occur according to Woodward rules. This given fixed value is called the base or parent value. If the two double bonds are trans to each other, the diene is said to be transoid. If the two double bonds belong to different rings, the system is said to be heteroanular and the base value in each case is 215nm. If the double bonds are cis to each other (cisoid), or the two double bonds are in the same ring (homoanular), then the base value is 253nm.

Since λmax = base value + ∑ substituent contributions + ∑ other contributions, if the other contributions are not very significant, homoanular diene will have a greater λmax because of its larger base value compared to heteroanular diene. This correlates well with the fact that conjugated systems absorb at a longer wavelength.

Answer:

pH ≅ 4.80

Explanation:

Given that:

the volume of HN₃ = 25 mL = 0.025 L

Molarity of HN₃ = 0.150 M

number of moles of HN₃ = 0.025 × 0.150

number of moles of HN₃ =  0.00375  mol

Molarity of NaOH = 0.150 M

the volume of NaOH = 13.3 mL = 0.0133

number of moles of NaOH = 0.0133× 0.150

number of moles of NaOH = 0.001995 mol

The chemical equation for the reaction of this process can be written as:

[tex]HN_3 + OH- ---> N^-_{3} + H_2O[/tex]

1 mole of hydrazoic acid react with 1 mole of hydroxide to give nitride ion and water

thus the new number of moles of HN₃ = 0.00375 - 0.001995 = 0.001755 mol

Total volume used in the reaction =  0.025 +  0.0133 = 0.0383  L

Concentration of [tex]HN_3[/tex] = [tex]\dfrac{0.001755}{0.0383}[/tex] = 0.0458 M

Concentration of [tex]N^{-}_3[/tex] = [tex]\dfrac{ 0.001995 }{0.0383}[/tex] = 0.0521 M

GIven that :

Ka = [tex]1.9 x 10^{-5}[/tex]

Thus; it's pKa = 4.72

[tex]pH =4.72 + log(\dfrac{ \ 0.0521}{0.0458})[/tex]

[tex]pH =4.72 + log(1.1376)[/tex]

[tex]pH =4.72 + 0.05598[/tex]

[tex]pH =4.77598[/tex]

pH ≅ 4.80

The pH of the solution 0.150 M hydrazoic acid after 13.3 mL of NaOH base is added is 4.80.

pH of the given solution will be used by using the following equation:

pH = pKa + log[conjugate base] / [weak acid]

Given chemical reaction will be represented as:

HN₃ + OH⁻ → N₃⁻ + H₂O

Moles will be calculated as:

n = M×V, where

M = molarity

V = volume

Moles of 0.150 M hydrazoic acid = (0.150M)(0.025L) = 0.00375  mol

Moles of 0.150 M NaOH = (0.0133)(0.150) = 0.001995 mol

From the above calculation it is clear that moles of hydrazoic acid is present in excess and it will be:

0.00375 - 0.001995 = 0.001755 mol

And 0.001995 mol of N₃⁻ is preduced by the reaction.

Total volume of the solution = 0.025 +  0.0133 = 0.0383  L

To calculate the pH after titration, first we have to calculate the concentration in terms of molarity of N₃⁻ and HN₃ as:

[N₃⁻] = 0.001995 mol / 0.0383  L = 0.0521 M

[HN₃] = 0.001755 mol / 0.0383  L = 0.0458 M

Ka for HN₃ = 1.9 × 10⁻⁵

pKa = -log( 1.9 × 10⁻⁵ ) = 4.72

On putting all these values on the above equation, we get

pH = 4.72 + log (0.0521) / (0.0458)

pH = 4.80

Hence, pH of the solution is 4.80.

To know more about pH, visit the below link:
https://brainly.com/question/10313314

Answer:

Explanation:

1 ) Cl₂ + ZnBr₂ = ZnCl₂ + Br₂

In this reaction , oxidation number of Cl decreases  from 0 to -1  so it is reduced  and oxidation number of Br increases from -1 to 0 so it is oxidised . Hence this reaction is oxidation - reduction reaction .

2 )

Pb( ClO₄)₂ + 2KI = PbI₂ + 2KClO₄

In this reaction oxidation number of none is changing so it is not an oxidation - reduction reaction.

3 )

CaCO₃ = CaO + CO₂

In this reaction also oxidation number of none is changing so it is not an oxidation - reduction reaction.

So only first reaction is oxidation - reduction reaction.

2nd option is correct.

Answer:

THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O

Explanation:

The empirical formula for the unknown compound can be obtained by following the processes below:

1 . Write out the percentage composition of the individual elements in the compound

C = 75.68 %

H = 8.80 %

O = 15.52 %

2. Divide the percentage composition by the atomic masses of the elements

C = 75 .68 / 12 = 6.3066

H = 8.80 / 1 = 8.8000

O = 15.52 / 16 = 0.9700

3. Divide the individual results by the lowest values

C = 6.3066 / 0.9700 = 6.5016

H = 8.8000 / 0.9700 = 9.0722

O = 0.9700 / 0.9700 = 1

4. Round up the values to the whole number

C = 7

H = 9

O = 1

5 Write out the empirical formula for the compound

C7H90

In conclusion, the empirical formula for the unknown compound is therefore C7H9O

Answer:

See explanation

Explanation:

For the first part of the question, we have to check the chiral carbons in 4-methyl-1,2-cyclohexanediol. In this case carbons, 1 and 2 are chiral, if we have 2 chiral carbons we will have 4 isomers. We have to remember that formula 2^n in which "n" is the number of chiral carbons, so:

2^n = 2^2 = 4 isomers

And the isomers that we can have are:

1) (1R,2S)-4-methylcyclohexane-1,2-diol

2) (1S,2S)-4-methylcyclohexane-1,2-diol

3) (1S,2S)-4-methylcyclohexane-1,2-diol

4) (1S,2R)-4-methylcyclohexane-1,2-diol

See figure 1

For the second part of the question, we have to remember that the oxidation with [tex]OsO_4[/tex] is a syn addition. In other words, the "OHs" are added in the same plane. In this case, we have the methyl group with a wedge bond, so the "OH" groups will have a dashed bond due to the steric hindrance. Due to this we only can have 1 isomer ((1S,2R,4S)-4-methylcyclohexane-1,2-diol). Finally, on this molecule, we dont have any symmetry planes (this characteristic will cancel out the optical activity), so the product of this reaction has optical activity.

See figure 2

I hope it helps!

Answer: Thus 234 kJ of energy are required to produce 1.00 kilogram of iron metal

Explanation:

To calculate the number of moles , we use the equation:

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]  

Putting values , we get:

[tex]\text{Moles of iron}=\frac{1000g}{56g/mol}=17.8moles[/tex]    (1.00kg=1000g)

The balanced chemical reaction is:

[tex]Fe_2O_3(s)+2CO(g)\rightarrow 2Fe(s)+3CO_2(g)[/tex]   [tex]\Delta H=+26.3kJ[/tex]

Given :

Energy released when 2 moles of [tex]Fe[/tex] is produced = 26.3 kJ

Thus Energy released when 17.8 moles of [tex]Fe[/tex] is produced =

= [tex]\frac{26.3kJ}{2}\times 17.8=234kJ[/tex]

Thus 234 kJ of energy are required to produce 1.00 kilogram of iron metal

Answer: The pH of the solution is 11.2

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in ml

moles of [tex]Ba(OH)_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{0.867g}{171g/mol}=0.00507mol[/tex]         (1g=1000mg)

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{0.00507\times 1000}{170}[/tex]

[tex]Molarity=0.0298[/tex]

pH or pOH is the measure of acidity or alkalinity of a solution.

pH is calculated by taking negative logarithm of hydrogen ion concentration.

[tex]pOH=-\log [OH^-][/tex]

[tex]Ba(OH)_2\rightarrow Ba^{2+}+2OH^{-}[/tex]

According to stoichiometry,

1 mole of [tex]Ba(OH)_2[/tex] gives 2 mole of [tex]OH^-[/tex]

Thus 0.0298 moles of [tex]Ba(OH)_2[/tex] gives =[tex]\frac{2}{1}\times 0.0298=0.0596[/tex] moles of [tex]OH^-[/tex]

Putting in the values:

[tex]pOH=-\log[0.0596]=2.82[/tex]

[tex]pH+pOH=14[/tex]

[tex]pH=14-2.82[/tex]

[tex]pH=11.2[/tex]

Thus the pH of the solution is 11.2

Answer:

n= 0.08186

{He}2s^2 2p^6

Explanation:

PV=nRT

n=PV/RT

n= (1.220 atm)(4.3410 L) / (0.0821 atm*L/mol*K)(788.0 K)

n=0.08186

As for the electron configuration:

Ne:

{He} 2s^2 2p^6

or long hang:

1s^2 2s^2 2p^6

[tex][Ne]=1s^22s^22p^{10}[/tex]

Given:

To find:

1.

The pressure of the gaseous boron trifluoride = P = 1.220 atm

The volume of the gas in bulb = V = 4.3410 L

The moles of the  gaseous boron trifluoride = n

The temperature of gaseous boron trifluoride = T = 788.0 K

Using an ideal gas equation:

[tex]PV = nRT\\\\1.220 atm\times 4.3410 L=n\times 0.0821 atm L/mol K\times 788.0 K\\\\n=\frac{1.220 atm\times 4.3410 L}{0.0821 atm L/mol K\times 788.0 K}\\\\n=0.08186 mol[/tex]

The moles of gaseous boron trifluoride is 0.08186 moles.

2.

The atomic number of neon atom = 10

The electronic configuration in the ground state is the most stable arrangement of the electrons in the lowest energy levels.

The ground state electronic configuration of neon is:

[tex][Ne]=1s^22s^22p^{10}[/tex]

Learn more about the ideal gas equation and electronic configuration here:

brainly.com/question/1056445?referrer=searchResults

brainly.com/question/5524513?referrer=searchResults

Answer:

NaClO + CH₃COOH ----> HClO + CH3CO- + Na

Explanation:

This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction

Answer:

in crystalline solids

Hope this answers your question, good luck

The crystalline solids represent the best identification where the long-range order should be found.

Crystalline solids refer to the solid where the atoms, molecules should be make the arrangement. The smallest & repeated pattern of this solid should be called as the unit cell. The unit cell should be treated as the bricks in the wall which means it should be homogenous in the nature and repeated

Therefore, The crystalline solids represent the best identification where the long-range order should be found.

Learn more about solid here: https://brainly.com/question/17431076

Answer:

3-Pentyn-1-ol

Explanation:

tripple bond is at 3 postion from alochol

carbon are 5 atoms so pent

yn becauese its alkyne

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

CaF2 + CO3- ----> CaCO3 + 2 F-

Explanation:

The chemical compounds found on the left side of the date are the reagents and those found on the right are the products, where calcium carbonate appears.

Calcium carbonate is a quaternary salt

Answer:

please look at the picture below.

Explanation:

Answer:

The incorrect statement from the options is OXIDATION IS A "GAIN" OF ELECTRONS

Explanation:

Oxidation in a redox reaction is the loss of electrons. It is also the increase in the oxidation states of an atom or ion or atoms in a molecule. A redox reaction is a type of chemical reaction in which there is a transfer of electrons from an atom or ion to another resulting in a change in oxidation states of the substances involved. The reducing agent in the reaction is undergoes oxidation by losing electrons while the oxidating agent is reduced that is it gains electrons at the end of the reaction. The atom or ion from which electron is lost is said to be oxidized while the other atom or ion involved in the reaction is reduced.

Oxidation is also the combination with O atoms and it is always accompanied by reduction because oxidation forms a half of the whole redox reaction. A substance cannot be oxidized except it has reduced another substance by losing electrons to it.

Answer:

[tex]T_2=453.05K[/tex]

Explanation:

Hello,

In this case, the temperature-variable Arrhenius equation is written as:

[tex]\frac{k(T_2)}{k(T_1)}=exp(\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} ))[/tex]

Now, for us to solve for the temperature by which the reaction rate constant is 0.0760M/s we proceed as shown below:

[tex]ln(\frac{k(T_2)}{k(T_1)})=\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} )\\ln(\frac{0.0760M/s}{0.00000291M/s} )=\frac{183000J/mol}{8.314J/(mol*K)} *(\frac{1}{T_2} -\frac{1}{573K} )\\\frac{1}{T_2} -\frac{1}{573K} =\frac{10.17}{22011.06K^{-1}} \\\\\frac{1}{T_2}=4.62x10^{-4}K^{-1}+\frac{1}{573K}\\\\\frac{1}{T_2}=2.21x10^{-3}K^{-1}\\\\T_2=453.05K[/tex]

Regards.

Answer:

The lewis structure of the compounds can be drawn by making the skeleton of the molecule first. Then the different atoms are arranged and the electrons are arranged in their bonding pattern. The lone pair of the atoms, which are not involved in the bonding are represented by the dots.

So the lewis structures of both the compound methyl mercaptan has been in the attached image:

Spelling of methyl metcaptain is wrong, the correct spelling is methyl mercaptan.

Answer:

Methyl mercaptan is also known as Methanethiol with the chemical formula  CH3SH and it is an organosulfur compound.

For lewis structure of methyl mercaptan (CH3SH), there are total 14 valence electrons. Four hydrogen atoms has one valence electron each, carbon has four valence electrons and sulfur has six valence electrons. Carbon form one bond with three hydrogen atoms by sharing one electron with each, carbon form one single bond with sulfur atom by sharing one electron with it and sulfur form one single bond with hydrogen. Sulfur left with four unpair electrons.

The sand that grained will be quickly chemically weathered away should be option b. ferromagnesian silicate minerals.

It should be considered as the Silicate minerals where cations of iron and the form of magnesium should be important for the chemical components. It is used for covering up the minerals. Also, calcite should be normal weather via the solution process so it required a lot of water that contains a high amount of carbonic acid.

Hence, the correct option is b.

Learn more about mineral here: https://brainly.com/question/20772787

Answer:

To the left.

Explanation:

Step 1: Write the balanced reaction at equilibrium

2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)

Step 2: Calculate the reaction quotient (Qc)

Qc = [SO₃]² / [SO₂]² × [O₂]

Qc = 0.254² / 0.500² × 0.00855

Qc = 30.2

Step 3: Determine in which direction will proceed the system

Since Qc > Kc, the system will shift to the left to attain the equilibrium.

Answer:

D. pollution

Explanation:

Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level,  coral bleaching and ocean deoxygenation.

Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.

Hence, the correct option is D.

Answer:

empirical formula = CH2O

molecular formula = C2H4O2

Answer:

On the off chance that the wavelength(λ) maximum worth has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement.

Explanation:

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium.

Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation.

where, Keq is the equilibrium constant.

On the off chance that the wavelength(λ) has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm.

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium. Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement. As the concentration goes up, more radiation is absorbed and the absorbance goes up. Therefore, the absorbance is directly proportional to the concentration.

Find more information about Transmittance here: brainly.com/question/14919298

Answer:

A.Electrolysis

Explanation:

A.Electrolysis

For example,  electrolysis of solution of NaCl in water gives H2 and O2.

Answer:

Volume of NaOH, aka V2 = 6.32 mL to 3 sig. fig.

A chemistry student weighs out 0.0941 g of hypochlorous acid (HClo) into a 250. ml. volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.2000 M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits mL.

Explanation:

1 mole HClO = 74.44g

0.0941g = [tex]\frac{0.0941}{74.44}[/tex] = 0.00126 moles

Concentration = no. of moles/volume in L

Hence, Concentration of HClO = 0.00126/ 0.250L

= 0.005M.

C1V1 =C2V2

0.005 × 250 mL = 0.2 × V2

Volume of NaOH, aka V2 = 6.32 mL to 3 sig. fig.

Answer:

They are also relatively soft metals: sodium and potassium can be cut with a butter knife.

Answer:A

Explanation:

Answer:

  0.0480 M

Explanation:

The reaction is ...

  H₂SO₄ + 2NaOH ⇒ Na₂SO₄ +2H₂O

That is, 2 moles of NaOH react with each mole of H₂SO₄. Then the molarity of the H₂SO₄ is ...

  moles/liter = (0.186 M/2)(12.9 mL)/(25.0 mL) ≈ 0.0480 M

Answer: Manganese(II)bromide

Explanation:

Because it is a chemical compound composed of manganese and bromine