Which among the following enhances WS-Security to facilitate a mechanism for issuing, renewing, and validating security tokens?

a. WS-Trust
b. WS-SecureConversion
c. WS-SecurityPolicy
d. All of the mentioned

Hi there! Hopefully this helps!

--------------------------------------------------------------------------------------------------

The answer is A, testing the circuit at the power source.

Answer:

Last

Explanation:

Routing is a term in engineering which involves the process of selecting a path for traffic in a network or across multiple networks. It is applicable in circuit-switched networks, such as the public switched telephone network (PSTN), and computer networks, such as the Internet. It is mostly used as a term for IP Routing.

Hence, in IP Routing, the first step is comparing the packet's destination IP address to all rows, followed by selecting the nest-match row. However, If no other row matches, the router will select the LAST row as its best match.

Answer:

Explanation:

Given that:

number of surfaces on a hard disk = 4

number of sectors = 2048 sectors

number of tracks per surface = 131, 072 (2^17)

a block holds 512 bytes.

Since, 'The disk is not "zoned.".....

then, Number of bytes / sector = 512

a) What is the total capacity of this disk?

The total capacity of the disk is:[tex]= 4 \ surfaces \times 131072 \dfrac{tracks}{surfaces} \times 2048 \dfrac{sector}{tracks} \times 512 \dfrac{bytes}{sector}[/tex]

[tex]= 5.49755814\times 10^{11} \ bytes[/tex]

= 549755814 KB ( kilobytes)

= 549755.814 MB (megabytes)

=549.755814  GB (gigabytes)

b. Given the disk in Part 1, how much data can be accessed without moving the disk heads. (i.e what is the capacity of one cylinder?)

The capacity of one cylinder can be estimated by determining the capacity of one surface and the capacity of one track.

The capacity of one surface = [tex]131072\dfrac{tracks}{surface} \times 2048 \dfrac{sector}{tracks} \times 512\dfrac{bytes}{sector}[/tex]

The capacity of one surface = [tex]1.37438953 \times 10^{11[/tex] byte = 137.44 GB

Capacity of one track = 2048 sectors/track × 512 bytes/sector

Capacity of one track = 1048576 Bytes/track

Capacity of one track =1048 KB/track

Capacity of one track ≅ 1 MB/track

Since the hard disk contains four surfaces

∴

capacity of one cylinder = 1 MB/track × 4 track/cylinder

capacity of one cylinder  = 4 MB

Answer:

3. Timestamp and Validation schedulers guarantee serializability.

Explanation:

Timestamp is a sequence of information encoded when a certain event occurs at a given time that information is decoded and message is identified. Time schedulers is optimistic scheduler and it removes physically unrealizable behavior. Timestamp cannot guarantee serializability.  It can detect unrealizable behavior.

Answer:

a. True

Explanation:

The statement that a pen testing method or penetration test in which a tester who has a means of entry to an application behind its firewall imitates an attack that could be caused by a malicious insider.

A penetration test, which is also refer to as a pen test, pentest or ethical hacking, is an approved simulated cyberattack done on a computer system, performed in order to evaluate the security of the system. The test is carried out to identify both weaknesses or vulnerabilities including the potential for unauthorized parties to penetrate to the system's features and data.

The main purpose of performing this test is to identify any vulnerability in a system's defenses which attackers may take advantage of.

Answer:

C. The main method proceeds to the next statement following the t3.join(); statement

Explanation:

join() method allows the thread to wait for another thread and completes its execution. If the thread object is executing, then t3.join() will make that t is terminated before the program executes the instruction. Thread provides the method which allows one thread to another complete its execution. If t is a thread object then t.join() will make that t is terminated before the next instruction. There are three overloaded functions.

join()

join(long mills)

join(long millis, int Nanos)

If multiple threads call the join() methods, then overloading allows the programmer to specify the period. Join is dependent on the OS and will wait .

Answer:

true

Explanation:

else if used so I think it's true

Answer:

it's a

Explanation:

Question:

"The correct syntax for passing an array as an argument to a method when a method is called and an array is passed to it is: "

A) a[0]..a[a.length]

B) a()

C) a

D) a[]  

Answer:

The correct answer is A.

An example is given in the attachment.

Cheers!

Answer:

Are highly portable.

Explanation:

Java is a object oriented and class-based programming language. It was developed by Sun Microsystems on the 23rd of May, 1995.

Java was designed by a software engineer called James Gosling and it is originally owned by Oracle. Also, worthy of mention is the fact that Java was originally known as Oak.

Generally, Java as a software application usually are developed having a ".jar", ".class" or ".java" filename extensions.

Because Java byte code is the same on all computers, compiled Java programs are highly portable. This simply means that, the Java byte code was designed such that it has very few implementation dependency, thus, once the code is written, it can run on all computer platforms that supports the Java programming language.

Hence, the Java byte code is a write once, run anywhere software program.

The Java byte code instructions are read and executed by a computer program known as a Java Virtual Machine (JVM).

Additionally, Java program is used for developing varieties of applications such as, mobile, desktop, games, web and application servers etc.

Answer:

i will send you the answers in the next 10minute

Answer: Computer engineering refers to the study that integrates digital engineering with computer sciences to design and develop computer structures and different technological gadgets.

Explanation:

Answer:

Computer engineering is the branch of engineering that integrates electronic engineering with computer sciences. Computer engineers design and develop computer systems and other technological devices.

I wrote it in Python because it was quick so i hope this is helpful

Answer:

date = input('Enter Date: ')

split_date = date.split('/')

month = split_date[0]

day = split_date[1]

if month == '1':

   english_month = 'January'

   spanish_month = 'Enero'

elif month == '2':

   english_month = 'February'

   spanish_month = 'Febrero'

elif month == '3':

   english_month = 'March'

   spanish_month = 'Marzo'

elif month == '4':

   english_month = 'April'

   spanish_month = 'Abril'

elif month == '5':

   english_month = 'May'

   spanish_month = 'Mayo'

elif month == '6':

   english_month = 'June'

   spanish_month = 'Junio'

elif month == '7':

   english_month = 'July'

   spanish_month = 'Julio'

elif month == '8':

   english_month = 'August'

   spanish_month = 'Agosto'

elif month == '9':

   english_month = 'September'

   spanish_month = 'Septiembre'

elif month == '10':

   english_month = 'October'

   spanish_month = 'Octubre'

elif month == '11':

   english_month = 'November'

   spanish_month = 'Noviembre'

elif month == '12':

   english_month = 'December'

   spanish_month = 'Diciembre'

US_English = f'{english_month} {day}'

International_Spanish = f'{day} {spanish_month}'

print(f'US English Form: {US_English}')

print(f'International Spanish Form: {International_Spanish}')

Input:

3/5

Output:

US English Form: March 5

International Spanish Form: 5 Marzo

Explanation:

You start by taking input from the user then splitting that at the '/' so that we have the date and the month in separate variables. Then we have an if statement checking to see what month is given and when the month is detected it sets a Spanish variable and an English variable then prints it to the screen.

Hope this helps.

Answer:

a. Compile code

Explanation:

In programming process, the following are important in defining what a program is to do;

i. Purpose: The first step in writing a program is describing the purpose of the program. This includes the aim, objective and the scope of the program.  The purpose of a program should be defined in the program.

ii. Input: It is also important to specify inputs for your program. Inputs are basically data supplied to the program in order to perform a task. Valid inputs are defined in the program.

iii. Output: Many times, when inputs are supplied to a program the resulting effects are shown in the outputs. The way the output will be is defined in the program.

iv. Process: This involves the method by which inputs are being mapped into outputs. The process implements the functionality of the program by converting inputs into their corresponding outputs. The process is defined in the program.

Compile code is not a requirement in defining what a program is to do. It just allows the source code of the program to be converted into a language that the machine understands.

Answer:

True

Explanation:

It is always possible and feasible for a programmer to come up with test cases that run through every possible path in a program is a "true statement" or the first option. It is very natural for a programmer/developer to come up with test that will run through every possible outcome in a program. Doing so will help the developer find things that might cause problems with the program in later time.

Hope this helps.

The answer to the question about the feasibility of a programmer to always come up with test cases that run through every possible path in a program is:

This refers to the set of actions which a programmer performs to find out if his software or program passes the system requirements in order to work properly.

With this in mind, we can see that while in some cases, it is possible for the programmer to come up with test cases, but it is not feasible in all cases as there can be hardware error which a virtual machine cannot solve.

Read more about test cases here:
https://brainly.com/question/26108146

Answer:

Following are the code to this question:

def data(a):#defining method data that accepts parameter

   print (a)#print parameter value

def data(b):#defining method data that accepts parameter

   print (b)#print parameter value

x=input("enter value: ")#defining variable x that5 input value from user

print(data(x))#call method data

Output:

enter value: hello..

hello..

None

Explanation:

Answer:

The Encryption solution that best prevents a competitor from receiving confidential information is the SSL(secure Socket Layer) Or TLS(Transport Layer Security).

Explanation:

Solution:

From my own perspective the encryption solution that i will use that prevents s a competitor from receiving confidential information and justify the recommendation is the SSL(secure Socket Layer) Or TLS(Transport Layer Security).

This is because in this case we have to share data confidentially (information need to be hidden from Unauthorized  security access. also these provides the Transport Layer security that we needed in above example above.

The purpose of these protocol is to provide server and client authentication, Data confidentiality,and Data integrity (protected from unauthorized change). Application Layer client/server program such as HTTP that uses the service of TCP can encapsulate their data in SSL Packets.

SSL (Secure Socket Layer): is defined as the normal technology for protecting an internet connection secure and defend any sensitive data that is being sent between two systems, and not allowing criminals from reading and changing any information sent, including potential personal details.

TLS (Transport Layer security): It is a procedure that allows  data integrity  and privacy over Internet communications.

Answer:

The program is written in python and it doesn't make use of any comment;

(See explanation section for line by line explanation)

def getN(num):

     fact = 1

     for i in range(1, 1 + num):

           fact = fact * i

     print("Factorial: ",fact)

num = int(input("Number: "))

if num < 0:

     print("Invalid")

else:

     getN(num)

Explanation:

The function getNum is defined here

def getN(num):

Initialize the result of the factorial to 1

     fact = 1

Get an iteration from 1 to the user input number

     for i in range(1, 1 + num):

Multiply each number that makes the iteration

           fact = fact * i

Print result

     print("Factorial: ",fact)

Ths line prompts user to input number

num = int(input("Number: "))

This line checks if user input is less than 0; If yes, the program prints "Invalid"

if num < 0:

     print("Invalid")

If otherwise, the program calls the getN function

else:

     getN(num)

Answer:

This program is written using Python Programming language,

The program doesn't make use of comments (See explanation section for line by line explanation)

Program starts here

print("Enter elements into the list. Enter 0 to stop")

newlist = []

b = float(input("User Input: "))

while not b==0:

    newlist.append(b)

    b = float(input("User Input: "))

newlist.sort()

print("Largest element is:", newlist[-1])

Explanation:

This line gives the user instruction on how to populate the list and how to stop

print("Enter elements into the list. Enter 0 to stop")

This line creates an empty list

newlist = []

This line enables the user to input numbers; float datatype was used to accommodate decimal numbers

b = float(input("User Input: "))

The italicized gets input from the user until s/he enters 0

while not b==0:

    newlist.append(b)

    b = int(input("User Input: "))

This line sorts the list in ascending order

newlist.sort()

The last element of the sorted list which is the largest element is printed using the next line

print("Largest element is:", newlist[-1])

Answer:

the answer is A avoid drinking 10 Tips to Avoid Driving Drunk

Explanation:

Give someone your keys. Find someone trustworthy who isn't drinking and hand over your keys for the night. ...

Don't drink on an empty stomach. ...

Know your body and pace yourself. ...

Take public transit. ...

Spend the night. ...

Wait an hour or two. ...

Stop drinking 90 minutes before you plan to leave. ...

Take the night off from drinking. hope this helps you :)

Answer:

Flowchart.

Explanation:

Structured Systems Analysis and Design (SSAD) is a methodology and a systems technique of analyzing and designing of information systems.

This system uses several tools to design various components such as dataflow diagram, conceptual data model, flowchart, etc.

In the given scenario, the tool that will be used by the system would be a flowchart.

A flowchart is a diagram that represents a systematic flow of a process. In SSAD, flowchart is used to illustrate the logical steps to be taken in a process but it does not show data elements and associations.

So, the correct answer is flowchart.

Answer:

I am writing a Python program:

def string_type(string):

   if string=="":  //if the string is empty

       return "empty"

   elif string.count(".")>1:  #if the period sign occurs more than once in string

       if string.count("\n"):  #checks if the new line occurs in the string

           return "page"  #if both the above cases are true then its a page

       return "paragraph"  # if the period sign condition is true then its a para

   elif string.count(" ")>=1:  #if no of spaces in string occur more than once

       return "sentence"  #returns sentence

   elif len(string)==1:  # if length of the string is 1 this

       return "character"  #returns character

   else:  #if none of the above conditions is true then its a word

       return "word" #returns word

Explanation:

def string_type(string):  this is the definition of method string_type which takes a string as argument and determines whether the type of string is a word, paragraph, page, sentence or empty.

if string=="" this if condition checks if the string is empty. If this condition is true then the method returns "empty"

elif string.count(".")>1  This condition checks if the string type is a paragragh

string.count(".")>1   and if string.count("\n") both statements check if the string type is a page.

Here the count() method is used which is used to return the number of times a specified string or character appears in the given string.

Suppose the string is "Paragraphs need to have multiple sentences. It's true.\n However, two is enough. Yes, two sentences can make a paragraph."

The if condition first checks if count(".")>1 which means it counts the occurrence of period i.e. "." in the string. If the period occurs more than once this means it could be a page. But it could also be a paragraph so in order to determine the correct string type another if statement if string.count("\n") inside elif statement determines if the string is a page or not. This statement checks the number of times a new line appears in the string. So this distinguishes the string type paragraph from string type page.

elif string.count(" ")>=1: statement determines if the string is a sentence. For example if the string is "i love to eat apples." count() method counts the number of times " " space appears in the string. If the space appears more than once this means this cannot be a single word or a character and it has more than one words. So this means its a sentence.

  elif len(string)==1:  this else if condition checks the length of the string. If the length of the string is 1 this means the string only has a single character. Suppose string is "!" Then the len (string) = 1 as it only contains exclamation mark character. So the method returns "character" . If none of the above if and elif conditions evaluates to true then this means the string type is a word.

Answer:

def string_type(string):

  if string=="":  //if the string is empty

      return "empty"

  elif string.count(".")>1:  #if the period sign occurs more than once in string

      if string.count("\n"):  #checks if the new line occurs in the string

          return "page"  #if both the above cases are true then its a page

      return "paragraph"  # if the period sign condition is true then its a para

  elif string.count(" ")>=1:  #if no of spaces in string occur more than once

      return "sentence"  #returns sentence

Explanation:

Question:

The technology environment would include studies of:

A) family changes

B) social engineering

C) information technology

D) minimum wage laws

E) customer service

Answer:

The correct answer is Information Technology (C)

Explanation:

Information and communications technology (ICT) or Information Technology. Whenever the technology environment is under discourse, these are usually the predominant subject matter.

It doesn't come as a surprise given that we live in an information age. An era of the internet of things. If we are tending towards an era where every equipment and even most biological species will give off and receive data, then a technology environment is really predominantly IT.

Cheers!

Answer:

Here is the Python code.

import csv  

inputfile = input("Enter name of the file: ")

count = {}

with open(inputfile, 'r') as csvfile:

 csvfile = csv.reader(csvfile)

 for line in csvfile:

   for words in line:

     if words not in count.keys():

       count[words] = 1

     else:

         count[words] + 1

   print(count)

Explanation:

I will explain the code line by line.

import csv   here the css is imported in order to read the file using csv.reader() method

inputfile = input("Enter name of the file: ")  This statement takes the name of the input file from the user

count = {}  this is basically a dictionary which will store the words in the file and the number of times each word appears in the file.

with open(inputfile, 'r') as csvfile:  This statement opens the inputfile using open() method in read mode. This basically opens the input file as csv type

 csvfile = csv.reader(csvfile)  This statement uses csv.reader() method to read the csv file contents.

for line in csvfile:  This outer for loop iterates through each line of the file

for words in line:  This inner loop iterates through each word in the line

if words not in count.keys():  This if condition checks if the word is not in the dictionary already. The dictionary holds key value pair and keys() method returns a list of all the keys of dictionary

count[words] = 1  if the word is not present already then assign 1 to the count dictionary

co unt[words] + 1 if the word is already present in dictionary increment count of the words by 1. Suppose the input file contains the following words:

hello,cat,man,hey,dog,boy,Hello,man,cat,woman,dog,Cat,hey,boy

Then because of co unt[words] + 1 statement if the word appears more than once in the file, then it will not be counted. So the output will be:

{' cat': 1, ' man': 1, ' dog': 1, ' woman': 1, ' Hello': 1, ' hey': 1, ' boy': 1, 'hello': 1, ' Cat': 1}

But if you want the program to count those words also in the file that appear more than once, then change this co unt[words] + 1 statement to:  

count[words] = count[words] + 1

So if the word is already present in the file its frequency is increased by 1 by incrementing 1 to the count[words]. This will produce the following output:

{' Cat': 1, ' cat': 2, ' boy': 2, ' woman': 1, ' dog': 2, ' hey': 2, ' man': 2, ' Hello': 1, 'hello': 1}  

You can see that cat, boy, dog and hey appear twice in the file.                    

print(count) This statement prints the dictionary contents with words and their frequencies.

The program with its output is attached.

The program is an illustration of file manipulations.

File manipulations involve reading from and writing into files.

The program in Python, where comments are used to explain each line is as follows:

#This imports csv module

import csv  

#This initializes a dictionary

kounter = {}

#This gets input for the file name

fname = input("Filename: ")

#This opens and iterates through the file

with open(fname, 'r') as cfile:

   #This reads the csv file

   cfile = csv.reader(cfile)

   #This iterates through each line

   for line in cfile:

       #This iterates through each word on each line

       for words in line:

           #This counts the occurrence of each word

           if words not in kounter.keys():

               kounter[words] = 1

           else:

               kounter[words] + 1

#This prints the occurrence of each word

print(kounter)

Read more about similar programs at:

https://brainly.com/question/14468239

Answer:

(a). as the combination of IP address and port number to allow an application within a computer to set up a connection with another application in another computer without ambiguity.

Explanation:

The explanation is in the answer.

Answer:

deployment phase

Explanation:

This specific scenario belongs to the deployment phase of the hardware lifecycle. This phase is described as when the purchased hardware and software devices are deployed to the end-user, and systems implemented to define asset relationships. Meaning that everything is installed and set up for the end-user to be able to use it correctly.

Answer:

d) 0 1 1 2

The above piece of code prints the Fibonacci series.

Explanation:

def a(n):

   if n == 0:

       return 0

   elif n == 1:

       return 1

   else:

       return a(n-1)+a(n-2)

for i in range(0,4):

   print(a(i),end=" ")

Answer:

Here are the stub functions get_user_num() and compute_avg()

def get_user_num():

   print('FIXME: Finish get_user_num()')

   return -1  

def compute_avg(user_num1, user_num2):

   print('FIXME: Finish compute_avg()')

   return -1

Explanation:

A stub is a small function or a piece of code which is sometimes used in program to test a function before its fully implemented. It can also be used for a longer program that is to be loaded later. It is also used for a long function or program that is remotely located. It is used to test or simulate the functionality of the program.  

The first stub for the function get_user_num() displays FIXME: Finish get_user_num() and then it returns -1.

The seconds stub for the function compute_avg() displays the FIXME: Finish compute_avg() and then it returns -1.

Here with each print statement, there is function name after this FIXME: Finish line. The first function name is get_user_num and the second is compute_avg().

Next the function get_user_num() is called twice and function compute_avg() followed by a print statement: print('Avg:', avg_result) which prints the result. So the program as a whole is given below:

def get_user_num():

   print('FIXME: Finish get_user_num()')

   return -1  

def compute_avg(user_num1, user_num2):

   print('FIXME: Finish compute_avg()')

   return -1  

user_num1 = 0  # the variables are initialized to 0

user_num2 = 0

avg_result = 0  

user_num1 = get_user_num()  #calls get_user_num method

user_num2 = get_user_num()

avg_result = compute_avg(user_num1, user_num2)  

print('Avg:', avg_result)

The method get_user_num() is called twice so the line FIXME: Finish get_user_num() is printed twice on the output screen. The method compute_avg() is called once in this statement avg_result = compute_avg(user_num1, user_num2)   so the line FIXME: Finish compute_avg() is printed once on the output screen. Next the statement print('Avg:', avg_result) displays Avg: -1. You can see in the above program that avg_result = compute_avg(user_num1, user_num2)   and compute_avg function returns -1 so Avg= -1. The program along with the produced outcome is attached.

Answer:

Bare metal DB systems

Explanation:

Oracle Call Interface OCI is comprehensive system which is native C language interface to Oracle Database for custom applications. The bare metal database system requires more compute node processing power. Customers are not given OS logons or SYSDBA in Oracle autonomous applications which prevents phishing attacks.

Answer:

Option A (Implementing a site-to-site VPN for server access) seems to be the correct choice.

Explanation:

Other choices are not related to the given instance. So that Option A would be the right one.