The most stable carbocation would be formed by t-butyl bromide alkyl halide. Carbocation stability is typically correlated with the number of methyl groups connected to the core carbon.
What in chemistry is a halide?Chemical substances called halides include halogens. There are halides in nature, and some of them, like salts and acids, are necessary for maintaining human existence. Halides are present in minerals, living things, and plants. Table salt, or NaCl, is the most popular halide.
What does halide group mean?The sodium, salt, and hydrochloric acid salts make up the group of minerals known as halides. This category of minerals includes the crystals halite, sylvite, and carnallite, which only include chloride with petrogenic significance. Rock salt, also known as halite (NaCl), is the crystalline form of sodium chloride.
To know more about halide visit:
https://brainly.com/question/28384269
#SPJ4
for each half-reaction, which is a correct equation for an oxidation reaction? al(s) ---> al3 (aq) 3 e- na (aq) ---> na(s) e-
Al metal is converted into an aluminum ion with an oxidation number of +3, and hydrogen in water or KOH is reduced from an oxidation number of +1 to zero in hydrogen gas.
Aluminum is reduced as a result of an increase in electrons due to a decrease in the oxidation number. 4. Cu0 is the oxidized reducing agent, and Al3+ is the oxidizing agent. The Half-Reaction approach is one technique for balancing redox reactions.
Learn more about aluminum,
https://brainly.com/question/12751230
#SPJ4
if the enthalpy released in a reaction is -220 kj/mol, what is the heat released when .25 moles of the substance a reacts?
The amount of heat released is -55 kJ which can be calculated using the number of moles and the enthalpy of vaporization.
At constant pressure, the amount of heat that is released or absorbed is identical to the enthalpy change.
It can be expressed as follows:
q= ΔHvap
Here, q represents the heat change and ΔHvap represents the enthalpy change.
The amount of heat released can be calculated as follows:
q= ΔHvap×n
q=(-220 kJ/mol)×0.25 mol
q=-55 kJ
Therefore, the amount of heat released is -55 kJ.
To learn more about heat check the link below:
https://brainly.com/question/13439286
#SPJ4
After completion of the citric acid cycle, most of the usable energy from the original glucose molecule is in the form of __________.
A. acetyl CoA
B. ATP
C. CO2
D. FADH2
E. NADH
After completion of the citric acid cycle, most of the usable energy from the original glucose molecule is in the form of B. ATP
The most basic kind of sugar, monosaccharides only have one kind of sugar molecule. The simplest sugar is glucose, which is also your body's primary energy source. In tests to determine blood sugar levels, sugar is measured. Fructose and galactose, two more monosaccharides, are converted into glucose via metabolism ( 1 , 2 ). For instance, ATP is necessary for both breathing and keeping your heart beating. As well as assisting in the synthesis of lipids and nerve impulses, ATP also facilitates the entry and exit of certain molecules from cells. Even some living things, including bioluminescent creatures like jellyfish and fireflies, use ATP to create light!
Learn more abut ATP here:
https://brainly.com/question/14637256
#SPJ4
Some cats have bobtails, which are short, stumpy tails that result from an inherited, recessive genotype (tt). Normal length tails are dominant in cats (tt, tt). When a cat with a bobtail is crossed with a cat that is heterozygous for normal tail length, what is the likelihood that the offspring will have a bobtail? 75% 50% 25% 0%.
When a cat with a bobtail (tt) is crossed with a cat that is heterozygous for normal tail length (Tt), the offspring will have the following genotypes: 50% will be Tt (normal tail length) and 50% will be tt (bobtail). This is because the heterozygous cat (Tt) carries one dominant allele (T) for normal tail length and one recessive allele (t) for bobtail. So, the likelihood that the offspring will have a bobtail is 50%. Therefore, the correct option is option 2.
Heterozygous refers to a genetic condition in which an individual carries two different alleles for a particular gene. Each gene in an organism typically has two alleles, one inherited from each parent. If an organism has two different alleles for a specific gene, it is considered heterozygous for that gene.
In this case, one allele is dominant and expresses its trait, while the other allele is recessive and remains hidden in the presence of the dominant allele. The term "heterozygous" contrasts with "homozygous," where an individual has two identical alleles for a particular gene.
Thus, the ideal selection is option 2.
Learn more about Heterozygous trait, here:
https://brainly.com/question/29793113
#SPJ12
According to the collision model, why does increasing the temperature increase the rate of a reaction?.
As temperature rises, more collisions with sufficient energy can take place, triggering the reaction due to increase in the kinetic energy. This concept is predicted by Collission theory. Collision theory helps scientists predict the rate of various chemical reactions. Collision theory helps scientists predict the rate of various chemical reactions. According to this theory, the number of successful collisions is related to the speed or rate of the chemical reaction
What is collision model?
The collision model states that a chemical reaction can only happen when reactant molecules, atoms, or ions meet with enough kinetic energy and in the right direction.
The main requirement for a collision model is that for a reaction to occur, the reactant particles (atoms or molecules) must collide and interact with each other in some way. This idea is used to explain many of the observations made about chemical kinetics.
To know more about collision model, check out https://brainly.com/question/1409456
#SPJ4
equal volumes of equimolar aqueous solutions of sodium sulfite and hydroiodic acid are mixed. what net ionic equation describes this system ?
Na₂S₂O₃(aq) + 2HCl(aq) → 2NaCl(aq) + H₂O(l) + SO₂(g) + S(s). A light yellow precipitate develops as the process continues.
What does the chemistry term "equation" mean?Reaction equation are symbolic depictions of chemical reactions where the reactants and products are stated in relation to the following chemical formulae.
Equation and response are what?What is an equations and a chemical reaction? In a chemical change, bonds between molecules of the reagent are destroyed and new bonds between molecules of the product are established to create a new substance. A chemical formula is nothing more than a statement of fact that represents how reactants generate products.
To know more about Equation visit:
https://brainly.com/question/28818520
#SPJ4
a sample of gas at is collected above water. the atmospheric pressure that day istorr. what is the partial pressure of the dry gas in mmhg?
The partial pressure of the dry gas is 739.3 mmhg.
Dalton's law of partial pressure states that the total pressure equals to the sum of partial pressure of individual gases
PTotal = PH2 + PWater
Hence it is common that the pressure of hydrogen gas is less because we have also account pressure due to vapor pressure of water. In some cases we will also include partial pressure correction term, so that
PTotal = PH2 + PWater becomes
PTotal = PH2 + PWater + Pcorrection
At 21 ^0C water vapor pressure = 18.7 torr
PTotal = PH2 + PWater
758 torr = PH2 + 18.7 torr
PH2 = 758 - 18.7 = 739.3 torr
PH2 = 739.3 mmhg
To learn more about pressure visit:https://brainly.com/question/12971272
#SPJ4
draw two lewis structures (one of which contains only single bonds) for the phosphate ion, po43–. which is the more important structure according to formal charge rules? multiple choice question. the more important structure contains a double bond, resulting in a formal charge of zero on p, 0 on the doubly bonded o, and –1 on other o atoms. the more important structure contains a double bond, resulting in a formal charge of zero on p, –1 on the doubly bonded o, and 0 on other o atoms. the more important structure contains all single bonds, resulting in a formal charge of 1 on p, and –1 on the o atoms. the more important structure contains all single bonds, resulting in a formal charge of 0 on p, and –1 on the o atoms.
Extra crucial systems incorporate a double bond, ensuing in a formal price of 0 on P, zero at the double-bonded O, and -1 on different O atoms.
Bond length or bond distance is defined due to the common distance among nuclei of bonded atoms in a molecule. it's miles a transferable belonging of a bond between atoms of consistent kinds, surprisingly independent of the relaxation of the molecule.
The bond period is defined due to the equilibrium distance between the nuclei of bonded atoms in a molecule. the larger the size of the atom, the longer the bond duration.
The longest bond is considered to be a carbon-carbon bond, found in diamonds. Its length is 154 pm. The carbon atoms bonded via covalent bonds.
Learn more about Bond length here:-brainly.com/question/20910787
#SPJ4
What is the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298K?
According to the ideal gas law, the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298 K is 11,149.074 L.
What is ideal gas law?The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.
Substituting the values in the above equation V= 4.5×8.314×298/1=11,149.074 L.
Thus, the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298 K is 11,149.074 L.
Learn more about ideal gas law,here:
https://brainly.com/question/13821925
#SPJ1
a reaction is half complete after 20 minutes. after 40 minutes, the reaction is twothirds complete. when will the reaction be 90% complete?
A reaction is half complete after 20 minutes. after 40 minutes, the reaction is two thirds complete. the reaction be 90% complete is 180 minutes.
the half life expression is given as :
1 / [A] = 1 / [A]o + kt
[A] is the concentration of reactant at time t. The starting reactant concentration is 1 M.
t1/2 = 1 / k[A]o
20 min = 1 / k(1)
k = 0.050 min
1 / [A] = 1 / [A]o + kt
1 / [A] = 1 / 1 + ( 0.050 × 40 min)
[A] = 0.33 M
this means the reaction is two third complete. when the reaction is 90 % and [A] = 0.100 M. then,
1 / [A] = 1 / [A]o + kt
1 / 0.100 M = 1 / 1 + ( 0.050 ) t
t = 9 / 0.050
t = 180 min
Thus the time is 180 min.
To learn more about half life here
https://brainly.com/question/24710827
#SPJ4
if the sample of chips used to make the filtrate weighed 75.5 kg , how much nacl nacl is present in one serving (155 gg ) of chips?
The amount of table salt in one serving or 155g of chips is 0.608g if the sample of chips used to make the filtrate weighed 75.5 kg.
By undergoing titration by Mohr's method with AgNO₃ and KCl, The chemical reaction is given by,
AgNO3(aq) + NaCl(aq) --> AgCl(s) + NaNO3(aq)
No moles of KCI are given by W/G.M.Wt
= 0.5/74.55
= 0.006707 moles of KCI
Then, from the reaction,
no of moles of KCI = no of moles of AgNO₃
Therefore,
molarity of AgNO₃ = no of moles/volume in L
= 0.006707/0.0625
= 0.107312M
47.2 ml of AgNO₃ solution to precipitate all of the chlorides.
Then, no of moles of Cl⁻ = molarity x volume in L
On substituting,
= 0.107312*0.0472
= 0.005065 moles
no of moles of Cl⁻ = no of moles of NaCl
mass of NaCl = no of moles of NaCl x gram molar mass of NaCl
= 0.005065 x 58.5
= 0.2963g of NaCl
155/75.5. = 2.05298013 chips
2.05298013x 0.2963 = 0.608298013 g
Therefore, 0.608g of NaCl is in 115g of chips.
To know more about food chemistry, click below:
https://brainly.com/question/29517724
#SPJ4
choose the aqueous solution with the lowest vapor pressure. these are all solutions of nonvolatile solutes and you should assume ideal van't hoff factors where applicable.
highest product of vant hoff factor and molality will give most lower in vapor pressure
because it depends directly on both
d option is true
vant hoff factor=3 (3ions)
3*0.06=0.18 will be highest so it is true
A substance that does not readily evaporate is referred to as a nonvolatile solute. Additionally, it does not increase the vapor pressure of the solution when dissolved in a solvent. What exactly is a nonvolatile liquid then? High melting points and low vapor pressure are characteristics of nonvolatile liquids.
learn more about nonvolatile liquids here:
https://brainly.com/question/24180437
#SPJ4
What happens to the temperature of a mixture of ice and liquid water as heat is applied at a constant rate?.
The mixture's temperature rises as the ice melts and then keeps rising at the same rate after all of the ice has melted.
What happens to the temperature of an ice water mixture when it is heated up while the ice and water are still present?Up until all of the bonds keeping the molecules in a crystal structure have been broken, nothing can be done to raise the kinetic energy of the molecules in the liquid state. So long as there is ice to melt, the temperature doesn't change. When water is heated to boiling, the same process takes place.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
a mixture of neon and helium gases, at a total pressure of 798 mm hg, contains 3.93 grams of neon and 0.228 grams of helium. what is the partial pressure of each gas in the mixture?
A mixture of neon and helium gases, at a total pressure of 798 mm hg, contains 3.93 grams of neon and 0.228 grams of helium. the partial pressure of each gas in the mixture is neon = 6146.46 mmHg and helium = 175.56 mmHg.
given that :
total pressure = 798 mmHg
mass of neon = 3.93 g
mass of helium = 0.228 g
moles of neon = mass / molar mass
= 3.93 / 20
=0.196 mol
moles of helium = 0.228 / 4 = 0.057 mol
total moles = 0.253
mole fraction of neon = 0.196 / 0.253
= 0.77
mole fraction of helium = 0.057 / 0.253 = 0.22
the partial pressure of neon = mole fraction × total pressure
= 0.77 × 798
= 614.46 mmHg
the partial pressure of the helium = mole fraction × total pressure
= 0.22 × 798
= 175.56 mmHg
To learn more about partial pressure here
https://brainly.com/question/29309951
#SPJ4
remediation of indoor air pollution problems involve modifications of box model parameters that result in concentration reductions. for example, reduction of the source rate directly reduces concentration. what do ventilation and the use of air cleaners have in common with respect to the box model?
They both reduce the residence time of pollutants ventilation and the use of air cleaners have in common with respect to the box model.
Any chemical or energy that is put into the environment and has unintended effects or negatively impacts the use of a resource is considered a pollutant or new entity. These can be created either naturally (such as minerals or extracted chemicals like oil) or artificially (due to human activity) (i.e. manufactured materials or byproducts from biodegradation). When pollutants are present at levels that have a major negative influence on the environment or public health, they become pollutants.
By altering the rate of animal or plant species' growth, or by affecting people's amenities, comfort, health, or property values, a pollution may cause long-term or short-term damage. Because they biodegrade, some contaminants won't last very long in the environment.
Learn more about pollutants here:
https://brainly.com/question/1578728
#SPJ4
Is the following statement TRUE or FALSE? The major organic of the following reaction is optically active. 1. BH 3. THE 2. H2O2, NaOH O True O False
True : The major organic of the following reaction is optically active. 1. BH 3. THF 2. H2O2 4.NaOH .
What is Optically active compound?The compounds which have the property to move(rotate) the plane of polarization of plane polarized lights is termed as Optically active compound. The compound that rotate the plane clockwise (to the right) are termed as dextrorotatory.
What is Plane of polarization?
Plane of polarization indicates to the direction in which linearly polarized lights are polarized.
Hence, True : The major organic of the following reaction is optically active. 1. BH 3. THF 2. H2O2 4.NaOH .
To know more about Optically active visit
https://brainly.com/question/15892094
#SPJ4
Can someone help me? If you pass an electric current through an iron nail, you will create an electromagnet. This magnet will pick up small objects, thus demonstrating that electrical energy can be converted into mechanical energy. Is there a way to use this principle to create a motor?
Only when an electric current is running through the coil of insulated wire that is wrapped around the iron nail will it behave like a magnet. The iron nail loses its magnetism when the electric current in the coil is stopped.
What is electric current ?An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume.
An electromagnet is a magnet that consists of a piece of steel or iron encircled by a coil. When an electric current is run through the coil, the metal turns magnetic.
Thus, The iron nail loses its magnetism when the electric current in the coil is stopped.
To learn more about electric current, follow the link;
https://brainly.com/question/2264542
#SPJ1
true or false: the outer orbitals of a halogen are further from the nucleus and are thereby more polarizable.
False, A halogen's outer orbitals are more polarizable since they are located further from the nucleus.
What commonalities in the halogens' electron configuration are there?You'll see that the outer shells of the atoms fluorine and chlorine both have seven electrons. All the halogens share that property of having seven electrons. All of them are only one electron short of having complete shells.
Why is it challenging to take an electron out of a halogen?Ionization force It is the amount of energy needed to separate one mole of gaseous atoms from one mole of electrons. Non-metals called halogens have seven valence electrons. Due to their lack of a tendency to lose electrons, halogens have exceptionally high ionization energies.
Learn more about Ionization here:
https://brainly.com/question/28385102
#SPJ4
the bond angle marked a in the following molecule is about . question 24 options: a) 109.5 b) 180 c) 60 d) 120 e) 90
The bond angle marked a in the following molecule is about 120. The atomic configuration of a molecule in three dimensions is known as molecular geometry.
Bond lengths, bond angles, torsional angles, and any other geometrical factors that affect each atom's position are all included in this, along with the molecule's overall form. In a complex molecule or ion, the angle between two orbitals that contain bonding electron pairs, or bonds, that are arranged around the centre atom is referred to as the bond angle.
A molecule is a collection of two or more atoms bonded together by the attractive forces known as chemical bonds; depending on the context, this definition may or may not contain ions. The number of atoms that make up a molecule might vary. If there are multiple atoms, they may all be the same atom or they may all be different.
the complete question is:
The bond angle marked a in the following molecule (H4C2O2N) is about.
learn more about bond angle here
https://brainly.com/question/14089750
#SPJ4
list all possible downward transitions for an electron in the 3d state. remember the selection rules!
All possible downward transitions for an electron in the 3d state are 1s 2s 2p 3s and 3p
In chemistry, the transition state of a chemical reaction is a particular configuration along the reaction coordinate. It is usually defined as the state corresponding to the highest potential energy along this reaction coordinate. It is often marked with the double dagger
In an atom, electrons can transition up or down depending on whether they absorb energy or emit energy. Electrons naturally want to be in the lowest possible energy state.
In an atom, electrons can transition up or down depending on whether they absorb energy or emit energy. Electrons naturally want to be in the lowest possible energy state.
Downward transitions would be possible to any lower energy level than the one the electron starts in, so all possible downward transitions for an electron in the 3d state are 1s 2s 2p 3s and 3p.
To know more about downward transitions
https://brainly.com/question/17998935
#SPJ4
Compared to the particles in a hardened lava sample the particles in a liquid lava sample.
Compared to the particles in a hardened lava sample the particles in a liquid lava sample are moving faster.
Lava is a mixture of the elements silicon, oxygen, aluminum, iron, magnesium, calcium, sodium, potassium, phosphorus, and titanium, as well as other elements in very minute amounts. Consider reading the background material in Minerals, Magma, and Volcanic Rocks. Lava is a liquid that solidifies into rock when it cools. BACKGROUND: On the surface of the earth, lava is a liquid form of molten rock. Extreme heat inside the Earth's crust causes lava to develop, which then explodes to create volcanoes. Geothermal energy can be extracted and used in a variety of ways because it can be found on the Earth's surface in various forms (such as dry heat, steam vents, lava, and geysers).
Learn more about lava here:
https://brainly.com/question/15393639
#SPJ4
A electrolytic cell is set up as was done in this experiment but with a different metal. An average current of 144.2 mA is delivered for 16 minutes and 39 seconds. The cathode gains 0.1427 g in mass. If there are two moles of electrons transferred per mole of the metal, what is the molar mass of the metal?
The molar mass of the metal is 191.1g/mol.
Solution:
Since the formula for faraday's law of electrolysis is given by
Since m = 0.1427g, I = 144.2mA = 144.2mA *(1A/1000mA) = 0.1442 A= 0.1442C/s, t = 16min39s = 16min*(60s/1min) = 960+39 = 999 second Z = 2e-mol
Now put all values in the above formula
0.1427 g = (0.1442 C*999s*M*1 mole e-*1 mol/96485C*s*2e-mol)
M = (0.1427g*96485*2/0.1442*999*1)
M = 191.1538 g/mol = 191.1g/mol
Therefore the molar mass of metal will be 191.1g/mol.
For chemical elements that do not have isolated molecules such as carbon and metals, the molar mass is instead calculated by dividing by the number of atomic moles. Molar mass is defined as the mass in grams of one mole of a substance. The unit of molar mass is gram/mole, abbreviated g/mol.
Learn more about The molar mass here:- https://brainly.com/question/837939
#SPJ4
Volume of the unknown AgNO3 solution =52.500 mL Mass of AgCl (s) 0.0143321 g (initial) 0.214981 g (final) Mole of AgCl = 0.00149999 Calculate mole and mass of AgNO3 in the 10 mL unknown solution based on the following reaction equation: NaCllaq) AgNO3aq) NaNO3aq) AgCl(s) Mole of AgNO3 in the 10 mL unknown solution Mass of AgNO3 in the 10 mL unknown solution Calculate mass of AgNO3 in the original unknown solution based on its volume Mass of AgNO3 in the original unknown solution Post Lab Assignments 1.A gravimetric analysis is done with an unknown sample containing MgSO4. A 0.5020-g solid mixture is dissolved in water and treated with an excess of Ba(NO3)2, resulting in the precipitation of 0.6168 g of BaS04 MgSO4(aq)+Ba(NO3)2(aq) _BaSO4(s)+Mg(NO3)2(a What is the mass of MgSO4 in the mixture?
The mass of AgNO₃ in 52.50g of the solution is 1.2485g.
NaCl + AgNO₃ = AgCl + NaNO₃
(10ml unknown)
Initial moles of AgCl
Mass/Molar mass
= 0.01433219/143.32 g/mol
= 1x 10⁻⁴ mol
Initial final moles of AgCl = 0.2149819/143.32 g/mol
= 1.5X 10⁻³ mol
So, Moles of AgCl are obtained by the reaction.
= 1.5×10⁻³ - 1x10⁻⁴
= 1.4 X 10⁻³ mol
from reacting stoichiometry
Moles of AgCl = Moles of AgNO₃
So, Moles of AgNO₃ in the 10ml of unknown solution = Moles of AgCl formed
= 1.4 x 10⁻³ mol
Mass of AgNO₃ in 10ml of an unknown solution
= Moles X Molar mass
= 1.4x 10⁻³ mol X 169.87 g/mol
= 0.237828g
= 0.247g
To learn more about moles and molar mass,
https://brainly.com/question/26416088
#SPJ4
where does the ring oxygen come from when converting a fisher projection for an aldehyde into a haworth structure?
The O from carbon 5 becomes the O in the ring when converting a fisher projection for an aldehyde into a haworth structure.
Once you know a few strategies, changing a Fischer projection to a Haworth projection is not too difficult.
If the OH is on the right side of the Fischer for C-2, C-3, and C-4, it will be lower in the Haworth. If it is on the Fischer's left side, it will be higher up in the Haworth.
Draw the C-5 CH₂OH pointing up if the sugar is D.
Draw the C-1 OH pointing downward for the alpha for D-sugars (and up for the beta)
To further understand the stereochemistry on the ring, a bond rotation on the C5 carbon is helpful. A bond rotation is accomplished by switching any three groups on a carbon. We'll therefore do the following three "moves":
H → OH
CH₂OH, OH
CH₂OH→ H
The C5-OH is no longer pointing downward after rotation; it is now to the side. Because of the tetrahedral structure of the carbon, I depicted the bond in the picture below as "dashed." I further dashed the C2-C1 bond.
This gives us the opportunity to depict the C5-OH attacking the carbonyl carbon and rupturing the C1-O pi link to generate a new O-C1 single bond.
We now have one of two rings after proton transfer, which we can represent as Haworth projections.
Hence, The O from carbon 5 becomes the O in the ring.
To learn more about Fischer projection refer- https://brainly.com/question/16906404
#SPJ4
Metal carbonyls, which have the general formula M(CO)x (x can be various possible subscripts depending on the particular metal used), are important intermediates in the purification and reactivity of transition metals. Consider the following synthesis of an unknown metal carbonyl, with the indicated equilibrium constant. M (s) + x CO (g) --> M(CO)x (g) Kp = 0.133 If you add an unknown amount of the metal and carbon monoxide gas to an empty reaction flask, and at equilibrium the pressure of carbon monoxide is 2.28 atm and metal carbonyl is 7.80 atm, what was the initial pressure of carbon monoxide that you added?
Metal carbonyls are characterized as volatile, low-melting-point compounds. They are created from the compound Mx(Co)y, which upon heating breaks down into metal and carbon monoxide. Contact with the skin can make them toxic.
In some cases, such as in nickel tetracarbonyl (Ni(CO)4), these complexes are homoleptic and only contain CO ligands, but more frequently, metal carbonyls are heteroleptic and contain a variety of ligands. Mononuclear metal carbonyls have a single metal atom at their core.
Learn more about the Mononuclear
brainly.com/question/28304567
#SPJ4
Which gas law can be used to calculate the pressure of hydrogen gas collected over water.
The overall pressure inside the container must equal the amount of the pressure of the gas we collected as well as the water vapor, according to Dalton's Law of Partial Pressures.
What is hydrogen gas?Hydrogen, a clean fuel, can replace methane, generally known as natural gas. It is expected to make up around 75% of the known universe mass and is the most common chemical element. Hydrogen atoms are abundant in waters, plants, animals, including, of course, human beings on this planet. The letters H and atomic number 1 stand for the chemical element hydrogen. Hydrogen is the lightest element. Hydrogen is typically a gas with the formula H2 composed of diatomic molecules. It is extremely flammable, non-toxic, tasteless, colorless, and odorless.
How is hydrogen gas made and its uses?High-Temperature Water Splitting: Chemical reactions that split water into hydrogen are fueled by high temperatures produced by solar concentrators or nuclear reactors. Photobiological Water Splitting: When water is consumed by microbes like green algae in the presence of sunshine, hydrogen is produced as a byproduct.
Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is currently most widely employed are fertilizer manufacturing and petroleum refining, with the developing markets of utilities and transportation.
To know more about Hydrogen Gas visit:
https://brainly.com/question/12494649
#SPJ4
what volume (in ml) of water must you add to 50.0 ml of a 0.600 m libr solution to produce a 0.145 m solution? assume the volumes are additive.
The formula MaVa=MbVb is used in this dilution problem. The initial 50.00 mL solution needs to be diluted from 0.600 M to 0.145 M by the addition of 0.597 mL.
How to solve?The formula MaVa=MbVb is used
Ma=0.600M
Va=50.00ml
Mb=0.145M
Vb=(50.00+Xml)
MaVa=MbVb
(0.600)(50.00)=(0.145)(50.00+X)
30.00-0.145=(50.00+X)
29.85/50.00=X
X=0.597 ml
When a solution is diluted, which of the following remains constant?When a solution is diluted, which of the following remains constant? Dilution has no effect on the solute concentration in a solution. The moles of the solute do not change when a solvent is added to a solution, but the concentration of the solution (in molarity and in all other units) and its volume do.
How do you dilute a solution's concentration?Taking a solution of higher concentration and gradually adding water until the desired concentration is obtained is a typical technique for creating a solution of a specific concentration. This process is called dilution.
Learn more about concentration here:
https://brainly.com/question/27548802
#SPJ4
if the final pressure is 1.76 atm , what was the initial pressure? express your answer in atmospheres.
The average reservoir pressure just before the initiation of a flame event, as well as the greatest normal operating pressure at a specific point in the system.
What is a good instance of pressure?
Holding a knife against a piece of fruit will demonstrate pressure in an easy way. It won't cut the surface of the fruit if you press the flat part of the knife against it. A sizable area is affected by the force (low pressure)
What are the many sorts of pressure?
The force applied physically to an object is referred to as pressure. Per unit area, the force is applied perpendicularly to the surfaces of the objects. The fundamental pressure formula is F/A. (Force per unit area). measure of pressure
Briefing:
W = 352 joule & n = 0.325 & T by kelvin = 22+273 = 295 K & Pf= 1.76
352 = (0.325 x 8.314 x 295)㏑(Pi/Pf)
∴㏑(Pi/Pf) = -352 / (0.325 x 8.314 x 295)
㏑(Pi/Pf) = - 0.44
Pi/Pf = 0.644
∴ Pi =1.76 x 0.644 = 1.13 atm
To know more about initial pressure visit:
https://brainly.com/question/28014782
#SPJ4
How much energy does it take to melt 50g of ice at 0°C?
Answer:
How much energy does it take to melt 50g of ice at 0°C?
The amount of energy required to melt 50g of ice at 0°C is approximately 334 Joules.
to what volume should you dilute 25ml of a 10m sulfuric acid solution to obtain a .150 m sulfuric acid solution
Solvent volume is 1642 ml. you create a.150 m sulfuric acid solutions by diluting 25 ml of a 10 m sulfuric acid solution.
Sulfuric acid: What is it?Oily liquid sulfuric acid is colorless. With the discharge of heat, it dissolves in water. It corrodes flesh and metals. On contact, it will scorch wood and the majority of other organic materials, although it is unlikely to start a fire.
What will happen if you get sulfuric acid on you?Sulfuric acid exposure can happen through consumption, skin contact, physical contact, breathing polluted air, and ingestion. Sulfuric acid can irritate the mouth and throat, burn your eyes, burn a hole in the gut if eaten, cause serious skin burns, and make breathing difficult if inhaled.
Briefing:Since this is a dilution question the equation to use is; C1V1=C2V2
C₁ = Initial concentration =10M
V₁ = Initial volume = 25ml
C₂ = Final concentration = 0.150M
V₂ = Final volume = ?
V₂ = C₁V₁/C₂
V₂ = 10.0M * 25 ml / 0.150m
V₂ = 1667 ml
Volume of solvent = 1667 - 25
=1642ml
To know more about sulfuric acid visit:
https://brainly.com/question/3645180
#SPJ4