Where is the Quick Search capability found in Access 2016?




AutoCorrect menu



Record Navigation bar



Find and Replace dialog box



Datasheet Totals options

Answer:

The programming language is not stated. To answer this question, I'll make use of python programming language.

The following units of conversions is used in this program

1 quarter = $0.25

1 dime = $0.10

1 nickel = $0.05

1 penny = $0.01

$1 = 100 cents

This program makes use of few comment (See explanation for line by line explanation)

Having listed the above, the program is as follows:

#prompt user for inputs

quarters = int(input("Number of Quarters: "))

dimes = int(input("Number of Dimes: "))

nickels = int(input("Number of Nickels: "))

pennies = int(input("Number of Pennies: "))

#Convert coins to dollars

dollar = 0.25 * quarters + 0.10 * dimes + 0.05 * nickels + 0.01 * pennies

print("Dollar Equivalent")

print(str(round(dollar,2))+" dollars")

cent = dollar * 100

print("Cent Equivalent")

print(str(round(cent,2))+" cents")

Explanation:

This first line is a comment

#prompt user for inputs

This line prompts user for value of quarters in the jar

quarters = int(input("Number of Quarters: "))

This line prompts user for value of dimes in the jar

dimes = int(input("Number of Dimes: "))

This line prompts user for value of nickels in the jar

nickels = int(input("Number of Nickels: "))

This line prompts user for value of pennies in the jar

pennies = int(input("Number of Pennies: "))

Using the coin conversion listed in the answer section, the user inputs is converted to dollars in the next line

dollar = 0.25 * quarters + 0.10 * dimes + 0.05 * nickels + 0.01 * pennies

The string "Dollar Equivalent" is printed using the next line

print("Dollar Equivalent")

This line prints the dollar equivalent of the converted coins

print(str(round(dollar,2))+" dollars")

Using the coin conversion listed in the answer section, the user inputs is converted to cents in the next line

cent = dollar * 100

The string "Cent Equivalent" is printed using the next line

print("Cent Equivalent")

This line prints the cent equivalent of the converted coins

print(str(round(cent,2))+" cents")

Please note that the dollar and cent equivalents are rounded to two decimal places. Even though, it's not a requirement of the program, it's a good programming practice

Answer:

The programming language is not stated;

For this, I'll answer your question using c++ programming language

The program does not make use of comments (See explanation for further details)

From the sample run, the input numbers are integer; So, this program assumes that all input will be integer...

Program starts here

#include<iostream>

using namespace std;

int main()

{

cout<<"Enter six numbers: ";

int Arr[6];

for(int i = 0;i<6;i++)

{

 cin>>Arr[i];

}

bool flag = true;

for(int i = 0;i<6;i++)  

{

for(int j = i;j<6;j++)

{

 if(Arr[i]>Arr[j])

 {

  flag = false;

 }

}

}

string isAscending;

if(flag)

{

isAscending = "True";

}

else

{

isAscending = "False";

}

cout<<isAscending;

return 0;

}

Explanation:

cout<<"Enter six numbers: ";  -> This line prompts the user for input

int Arr[6]; -> The input is stored in an array; This line declares the array

The following for loop iteration is used to iterate through the array

for(int i = 0;i<6;i++)

{

 cin>>Arr[i];  -> This line accepts user input

}

bool flag = true;  -> A boolean variable is initialized to true

The following nested loop checks if numbers are in ascending order

for(int i = 0;i<6;i++)  

{

for(int j = i;j<6;j++)

{

 if(Arr[i]>Arr[j])  -> This particular if statement checks if a number is greater than the next number

 {

  flag = false;  -> If yes, the boolean variable is changed to false

 }

}

}  - > The nested loop ends here

string isAscending  = "True";  -> Here, isAscending is declared as string

if(flag)  If boolean variable flag is true; i

{

isAscending = "True";  "True" is assigned to isAscending

}

else  -> Otherwise; if boolean variable flag is no longer true; i.e if it's false

{

isAscending = "False"; -> "False" is assigned to isAscending

}

cout<<isAscending;  -> The corresponding value of isAscending is printed

The complete program that reads 6 numbers and assigns True to variable isAscending if the numbers are in ascending order is as follows;

number = 0

list1 = []

while number < 6:

    x = input("enter six number: ")

    number += 1

    list1.append(x)

if sorted(list1)==list1:

    print("True")

else:

    print("False")

The code is written in python

learn more on python here: https://brainly.com/question/26104476

Answer: The answer is A: MFA

Answer:

Let f be a function  

a) f(n) = n²  

b) f(n) = n/2  

c) f(n) = 0  

Explanation:  

a) f(n) = n²  

This function is one-to-one function because the square of two different or distinct natural numbers cannot be equal.  

Let a and b are two elements both belong to N i.e. a ∈ N and b ∈ N. Then:

                               f(a) = f(b) ⇒ a² = b² ⇒ a = b  

The function f(n)= n² is not an onto function because not every natural number is a square of a natural number. This means that there is no other natural number that can be squared to result in that natural number.  For example 2 is a natural numbers but not a perfect square and also 24 is a natural number but not a perfect square.  

b) f(n) = n/2  

The above function example is an onto function because every natural number, let’s say n is a natural number that belongs to N, is the image of 2n. For example:

                               f(2n) = [2n/2] = n  

The above function is not one-to-one function because there are certain different natural numbers that have the same value or image. For example:  

When the value of n=1, then

                                  n/2 = [1/2] = [0.5] = 1  

When the value of n=2 then  

                                   n/2 = [2/2] = [1] = 1  

c) f(n) = 0

The above function is neither one-to-one nor onto. In order to depict that a function is not one-to-one there should be two elements in N having same image and the above example is not one to one because every integer has the same image.  The above function example is also not an onto function because every positive integer is not an image of any natural number.

Answer:

The answer is The Cache Sets (S) = 32, Tag bits (t)=24, Set index bits(s) = 5 and Block offset bits (b) = 3

Explanation:

Solution

Given Data:

Physical address = 32 bit (memory address)

Cache size = 1024 bytes

Block size = 8 bytes

Now

It is a 4 way set associative mapping, so the set size becomes 4 blocks.

Thus

Number of blocks = cache size/block size

=1024/8

=128

The number of blocks = 128

=2^7

The number of sets = No of blocks/set size

=128/4

= 32

Hence the number of sets = 32

←Block ←number→

Tag → Set number→Block offset

←32 bit→

Now, =

The block offset = Log₂ (block size)

=Log₂⁸ = Log₂^2^3 =3

Then

Set number pc nothing but set index number

Set number = Log₂ (sets) = log₂³² =5

The remaining bits are tag bits.

Thus

Tag bits = Memory -Address Bits- (Block offset bits + set number bits)

= 32 - (3+5)

=32-8

=24

So,

Tag bits = 24

Therefore

The Cache Sets = 32

Tag bits =24

Set index bits = 5

Block offset bits = 3

Note: ←32 bits→

Tag 24 → Set index  5→Block offset 3

Answer:

Hello your question lacks the required options

A) Business impact analysis plan

B) Business continuity plan

C) Disaster recovery plan

D) Recovery point plan

answer : Disaster recovery plan ( c )

Explanation:

The Disaster recovery  plan is a comprehensive creation of a system/set procedures of recovery of the IT infrastructure from potential threats of a company. especially when the interruption is caused by a disaster, accident or an emergency.

The shutting down of the sever due to overheating and not able to restart for Business is an interruption in a critical business process and the plan to direct the recovery for this single server should be the " Disaster recovery plan"

Answer:

During a traceroute, the router decreases the Time To Live values of the packet sent from the traceroute by one during routing, discards the packets whose Time To Live values have reached zero, returning the ICMP error message ICMP time exceeded.

Explanation:

Traceroute performs a route tracing function in a network. It is a network diagnostic commands that shows the path followed, and measures the transit delays of packets across an Internet Protocol (IP) network, from the source to the destination, and also reports the IP address of all the routers it pinged along its path. During this process, the traceroute sends packets with Time To Live values that increases steadily from packet to packet; the process is started with Time To Live value of one. At the routers, the Time To Live values of the packets is gradually decreased by one during routing, and the packets whose Time To Live values have reached zero are discarded, returning the ICMP error message ICMP Time Exceeded

Answer:

Following are the statement is given below

if(updateDirection ==1) // check condition

{

++numUsers; // increments the value

}

else

{

--numUsers; // decrement the value

}

Explanation:

Following are the description of statement

Answer:

- Transform binary or unary M:N relationship or associative entity with its own key.

Explanation:

Transform binary relation is described as the method through which a decimal can easily be converted into binary while the unary relationship is described as a relationship in which both the two participants occurs from the same entity.

In the given case, 'transform binary or unary M:N relationship' can be created using 'the primary key linked with the relationship plus any non-key aspects of the relationship and the primary keys of the related entities' as it displays the existence of a relationship between the occurrences of a similar set of the entity i.e. associative entity here.

Answer:

This is the complete question:

for i ∈ {1,2,3,4,5,6} do  beep  

for j ∈ {1,2,3,4} do  beep  

for k ∈ {1,2,3} do

    for l ∈ {1,2,3,4,5} do beep  

for m ∈ {1,2,3,4} do  beep

Explanation:

I will explain the algorithm line by line.

for i ∈ {1,2,3,4,5,6} do  beep  

This statement has a for loop and i variable that can take the values from 1 to 6. As there are 6 possible values for i so the beep statement gets executed 6 times in this for loop.

for j ∈ {1,2,3,4} do  beep  

This statement has a for loop and j variable that can take the values from 1 to 4. As there are 4 possible values for j so the beep statement gets executed 4 times in this for loop.

for k ∈ {1,2,3} do

    for l ∈ {1,2,3,4,5} do beep  

There are two statements here. The above statement has a for loop and k variable that can take the values from 1 to 3. As there are 3 possible values for k so the beep statement gets executed 3 times in this for loop. The below statement has a for loop and l variable that can take the values from 1 to 5. As there are 5 possible values for l so the beep statement gets executed 5 times in this for loop. However these statement work like an inner and outer loop where the outer loop is k and inner one is l which means 1 gets executed for each combination of values of k and l. As there are three values for k and 5 possible values for l so the combinations of values of k and l is 15 because 3 * 5 = 15. Hence the beep statement gets executed 15 times.

for m ∈ {1,2,3,4} do  beep

This statement has a for loop and m variable that can take the values from 1 to 4. As there are 4 possible values for m so the beep statement gets executed 4 times in this for loop.

Now lets take the sum of all the above computed beeps.

for i = 6 beeps

for j = 4 beeps

for k and l possible combinations = 15 beeps

for m = 4 beeps

total beeps = 6 + 4 + 15 + 4 = 29 beeps

Answer:

Explanation:

Firstly, declare the necessary variables and initialize them with zero (Line 4-8). Next create a Scanner object to get user input for score (Line 10). Create a while loop by using the counter as limit (Line 12). In the while loop, prompt user to input a number between 1 - 100 (Line 13-14). Create another while loop to check the input must be between 1 - 100 or it will print invalid message and ask for user input again (Line 15-19).

Next, create an if-else statement to check if the current score is equal or above 60. If so print pass if not print fail (Line 21-27). At the same time increment the fail and pass counter.

Create another two if statement to get the current highest and lowest score and assign them to highest and lowest variables, respectively (Line 29-35).

Increment the counter by one before proceeding to the next loop to repeat the same process (Line 37).

At last, print the required output after finishing the while loop (Line 40-43).

Answer:

Your answer can be found in the explanation below.

Explanation:

GSM is the abbreviation for Global System for Mobile communication. Its purpose is to transmit voice and data services over a range. It is a digital cellular technology.

PLMN is the abbreviation for Public Land Mobile network. It is defined as the wireless communication service or combination of services rendered by a telecommunication operator.

The plmn consists of technologies that range from Egde to 3G to 4G/LTE.

PLMN consists of different services to its mobile subscribers or users but for the purpose of this question, i will be pointing out just 5 of them alongside its definitions.

1. Emergency calls services to fire or police: Plmn provides us with the option to make emergency calls in the event of any accident or fire incident, etc.It is available on devices either when locked or unlocked.

2. Voice calls to/from other PLMN: This entails the putting of calls across to persons we cannot reach very quickly. PLMN helps to connect persons through its network of from other networks thus making communication easier.

3. Internet connectivity: PLMN provieds us with internet services through wifi or bundles that enable us have access to the internet as well as help us communicate with people and loved ones over a distance. Internet service are possble either on GPRS or 3G or 4G networks.

4. SMS service: SMS means short messaging service. This is also know as text messages. PLMN allows us to be able to send short messages to people as oppposed to mails. It is mostly instant and can be sent or recieved from the same PLMN or others.

5. MMS service: Multimedia messaging service whose short form is MMS ccan be descibed as the exchange of heavier messages such as a picture or music or document but not from an email. It is availabel for use from one PLMN to another.

Cheers.

Answer:

B. 640,000 bits

Explanation:

From the given question,

The voice line has 24 channels with each having the capacity for 1 telephone conversation with the size of 8 bits and 8, 000 samples/second.

Thus for a 10 seconds clip, the rate = 8 000 × 10

                                                           = 80 000

The rate is 80 000 samples/second.

The size of the storage in bits = rate ×8 bits

                                                  = 80 000 × 8

                                                  = 640 000 bits

Therefore, the size of the storage required for storing the video clip on disk is 640 000 bits.

Answer:

c. role- or function-specific.

Explanation:

The Security Configuration Wizard was  firstly used by Microsoft in its development of the Windows Server 2003 Service Pack 1. It provides guidance to network security administrators, secure domain controllers, firewall rules and reduce the attack surface on production servers.

Security Configuration Wizard saves any changes that are made as a role- or function-specific security policy which can be used as a baseline and applied to other servers in the network.

After checking the Group policy by an administrator, any changes made as a role- or function-specific security policy by the Security Configuration Wizard (SCW) is used as a baseline and can be applied either immediately or sometimes in the future to other servers in the network after testing it in a well secured environment.

Basically, the Microsoft Security Configuration Wizard (SCW) typically help administrators in running the following;

1. Role-Based Service Configuration.

2. Registry settings.

3. Network and Firewall Security settings.

4. Auditing Policy settings.

Answer:

The cout<<numInsects<<""; statement should be placed before numInsects = numInsects * 2;  in the while loop.

Explanation:

Your program gives the following output:

16  32  64  128

However it should give the following output:

8  16  32  64

Lets see while loop to check what you did wrong in your program:

The while loop checks if numInsects is less than 100. It is true as numInsects =8 which is less than 100.

So the body of while loop executes. numInsects = numInsects * 2;  statement in the body multiplies the value of numInsects i.e 8 with 2 and then cout << numInsects << " ";  prints the value of numInsects  AFTER the multiplication with 2 is performed. So 8 is not printed in output but instead 16 (the result of 8*2=16) is printed as the result of first iteration.

So lets change the while loop as follows:

while (numInsects < 100) {

cout << numInsects << " ";

numInsects = numInsects * 2;

Now lets see how it works.

The while loop checks if numInsects is less than 100. It is true as numInsects =8 which is less than 100

So the body of while loop executes. cout << numInsects << " "; first prints the value of numInsects i.e. 8. Next numInsects = numInsects * 2;  multiplies the value of numInsects i.e 8 with 2. So first 8 is printed on the output screen. Then the multiplication i.e. 8*2=16 is performed as the result of first iteration. So now value of numInsects becomes 16.

Next the while loop condition numInsects < 100 is again checked. It is true again as 16<100. Now cout << numInsects << " "; is executed which prints 16. After this, the multiplication is again performed and new value of numInsects becomes 32 at second iteration. This is how while loops continues to execute.

So this while loop stops when the value of numInsects exceeds 100.

Answer:

Explanation:

To explain how the Optimal Huffman code works we draw the Huffman tree for the set of symbols and the leaves of the tree are symbols

Note; the right and left moves on the tree starting from the root of the tree to the leaves contain 1 and 1

Also each letter in the tree has a code word from the the root to each letter and the code is called ; Huffman codes.

h : 0

g : 10

f  : 110

e : 1110

d : 11110

c : 111110

b : 1111110

a : 11111110

attached is the Huffman tree

Answer & Explanation:

To print 10 on a line and each number separated by space; you make the following modifications.

print(str(i)+" ",end=' ')

str(i)-> represents the actual number to be printed

" "-> puts a space after the number is printed

end = ' ' -> allows printing to continue on the same line

if(count == 10):

     print(' ')

The above line checks if count variable is 10;

If yes, a blank is printed which allows printing to start on a new line;

The modified code is as follows (Also, see attachment for proper indentation)

count = 0

for i in range(100,201):

     if(i%6 == 0 and i%5!=0) or (i%5 ==0 and i%6!=0):

           print(str(i)+" ",end=' ')

           count = count + 1

           if(count == 10):

                 print(' ')

                 count = 0

Answer:

The question seem incomplete as the list is not given and the programming language is not stated;

To answer this question, I'll answer this question using Python programming language and the program will allow user input.

Input will stop until user enters 0

The program is as follows

newlist = []

print("Input into the list; Press 0 to stop")

userinput = int(input("User Input:"))

while not userinput == 0:

     newlist.append(userinput)

     userinput = int(input("User Input:"))

is_ascending = "True"

i = 1

while i < len(newlist):  

     if(newlist[i] < newlist[i - 1]):  

           is_ascending = "False"

     i += 1

print(newlist)

print(is_ascending)

Explanation:

This line declares an empty list

newlist = []

This line prompts gives instruction to user on how to stop input

print("Input into the list; Press 0 to stop")

This line prompts user for input

userinput = int(input("User Input:"))

This next three lines takes input from the user until the user enters 0

while not userinput == 0:

     newlist.append(userinput)

     userinput = int(input("User Input:"))

The next line initialized "True" to variable is_ascending

is_ascending = "True"

The next 5 line iterates from the index element of the list till the last to check if the list is sorted

i = 1

while i < len(newlist):  

     if(newlist[i] < newlist[i - 1]):  

           is_ascending = "False"

     i += 1

The next line prints the list

print(newlist)

The next line prints the value of is_ascending

print(is_ascending)

Answer:

C- To name files and folders

Explanation:

This answer was marked correct on my Cengage quiz.

A file manager is used for all of the following except to name files and folders.

In conclusion, the correct option is C.

Read related link on:

https://brainly.com/question/20341219

Answer:

d. Port mirror

Explanation:

Port mirroring is a method to monitor network traffic and it is used in the Intrusion Detection Systems. It is also called Switched Port Analyzer and is used to analyse the network errors. This technique basically copies the network packets and sends or transmits these copied packed from one port to another in a network device such as a switch. This means that this technique is used to copy the network packets from one switch port and send the copy of these packets to another port where these packets are monitored. This is how it analyses the network errors and incoming traffic for irregular behavior and also this can be done without affecting the normal operation of the switch and other network processes. It is simple, inexpensive and easy to establish and use. The most important advantage of using mirrored ports is that it catches the traffic on several ports at once or can capture all of the network traffic.

Answer:

The overview of the given question is described in the explanation segment below.

Explanation:

The number of casualties has occurred in recent years. The following are indeed the assaults:

Arbitrary Remote Code execution attacks:

It's also a very hazardous assault. Unsanitary working on implementing that used operating system including user actions could enable an attacker to execute arbitrary functions mostly on system files.

Sites become targeted with such a DOS assault that will cause them inaccessible whether they close the account to an offender who threatens them.

Prevention: We could protect this by preventing the call from additional assessment by the user. We will disinfect input validation if we transfer values to devise calls. The input data is permitted to transfer on requests, it should have been strictly regulated although restricted to a predetermined system of principles.

Injection attack:

The object of the Injection Attack seems to be to delete vital information from the server. Throughout the list, we have such a user, a code, as well as a lot of several other essential stuff. Assailants are taking vital data and doing the wrong stuff. This can have an impact on the web site or software application interface the SQL.

Prevention: Parameterized functions require developers must specify all of the SQL code, and afterward move the question in-parameter, allowing the server to distinguish between some of the code as well as the information. By decreasing the privilege allocated to each database. White list data validation has been used to prevent abnormal information.

Zero-day attack:

It corresponds to something like a vulnerability flaw undisclosed to the user. The security vulnerability becomes infected with malware. The attackers have access to inappropriate details.

Prevention: The organizations are releasing the patch fixes the found holes. The updated plugin is also a preventive tool.

Buffer overflow attack:

This is indeed a major security threat to the accuracy of the data. This overflow happens since more information becomes set to either a specified size than even the buffer could accommodate. Adjoining program memory is compromised. During that time, the attacker was indeed running obfuscated code. Two key forms of such attack are provided below:

Prevention: Standard library features, including such strcpy, should indeed be avoided. Standard testing should be performed to identify as well as resolve overflow.

Answer:

This function (along with the main)is written using python progrmming language.

The function is written using for loop;

This program does not make use comments (See explanation section for detailed line by line explanation)

def is_prime(num):

    if num == 1:

         print(str(num)+" is not prime")

    else:

         for i in range(2 , num):

              if num % i == 0:

                   print(str(num)+" is not prime because it can b divided by "+str(i)+" and "+str(int(num/i))+" with no remainder")

                   break;

         else:

              print(str(num) + " is prime because only 1 and "+str(num)+" divide it with no remainder")

num = int(input("Number: "))

is_prime(num)

Explanation:

This line defines the function is_prime

def is_prime(num):

The italicize line checks if the user input is 1; If yes it prints 1 is not prime

    if num == 1:

         print(str(num)+" is not prime")

If the above conditional statement is not true (i.e. if user input is greater than 1), the following is executed

    else:

The italicized checks if user input is primer (by using for loop iteration which starts from 2 and ends at the input number)

         for i in range(2 , num):

              if num % i == 0:

This line prints if the number is not a prime number and why it's not a prime number

                   print(str(num)+" is not prime because it can b divided by "+str(i)+" and "+str(int(num/i))+" with no remainder")

                   break;

If otherwise; i.e if user input is prime, the following italicized statements are executed

         else:

              print(str(num) + " is prime because only 1 and "+str(num)+" divide it with no remainder")

The function ends here

The main begins here

num = int(input("Number: "))  This line prompts user for input

is_prime(num) This line calls the defined function

Answer:

Hello your question lacks some parts attached is the complete question and the solution is written in the explanation

Explanation:

VHDL CODE::::::

VHDL Code for RAM Design:

library IEEE;

use IEEE.STD_LOGIC_1164.ALL;

use IEEE.STD_LOGIC_ARITH.ALL;

use IEEE.STD_LOGIC_UNSIGNED.ALL;

entity RAM_32Bits is

port (

Clk: in std_logic;

CS: in std_logic;

RW: in std_logic;

Address: in std_logic_vector(3 downto 0);

Data_In: in std_logic_vector(31downto 0);

Data_Out: out std_logic_vector(31downto 0);

)

end entity RAM_32Bits;

architecture RAM_32 of RAM_32Bits is

// Declare Memory Array

type RAM is array (3 downto 0) of std_logic_vector(31 downto 0);

signal mem_array: ram;

// Signal Declaration

signal read_addr: std_logic_vector (3 downto 0);

begin

process (Clk)

begin

if (Clk’event and Clk=’1’) then

if (CS=’1’ and RW=’1’) then

ram(conv_integer(Address)) <= Data_In;

endif;

if (CS=’1’ and RW=’0’) then

read_addr <= Address;

endif;

else

read_addr <= read_addr;

endif;

endprocess

Data_Out <= ram[conv_integer(read_addr)];

end architecture RAM_32;

Answer:

A bandwidth is the maximum rate of transfer of data across a given path

Latency refers to the delay of data to travel or move between a source and destination

An example of a high bandwidth and high latency network is the Satellite Internet connectivity.

An example of a low bandwidth and latency network is the telephone system connection.

Explanation:

Solution

Bandwidth: Bandwidth determines how fast data can be transferred for example, how many bits/sec it can transport.

Latency: It refers to the delay or how long it takes for data to travel between it's source and destination.

An example of a high bandwidth and high latency network is the Satellite internet connection.

Satellite internet connection: This is responsible for the connectivity of several systems, it has a high bandwidth, since satellite are in space, due to distance it has a high latency.

So, satellite internet connection is compensated with high latency and high bandwidth.

An example of a low bandwidth and low latency network is the Telephony network.

Telephone/telephony internet connection: This connection does not have much data for transfer. it has low size audio files of which a low bandwidth range. also for both end or end users to understand and talk to each other, it has low latency.

An example of a network that exhibits high bandwidth but also high latency is Satellite internet connection.

An example of one that has both low bandwidth and low latency is telephony internet connection.

Based on the provided information, we can say that Satellite internet connection posses high bandwidth but also high latency because, the fastness of data transfer is based on the bandwidth and how the data to travel between it's source and destination is based on its latency.

We can conclude that telephony internet connection has low bandwidth and low latency because of low data transfer is required.

Learn more about bandwidth at;

https://brainly.com/question/11408596

All of the following are true about hacksaws, except a coarse hacksaw blade (one with fewer teeth) is better for cutting thick steel than a fine blade. The correct option is b.

A hacksaw is a saw with fine teeth that were originally and primarily used to cut metal. Typically, a bow saw is used to cut wood and is the corresponding saw.

Hacksaw is used by hand, it is a small tool for cutting pipes rods wood etc that is very common and homes and in shops. The different types of hacksaws. The main three types of hacksaws are course-grade hacksaws, medium-grade hacksaws, and fine-grade hacks. The difference is just for the quality, and the design of the blade.

Therefore, the correct option is b. Cutting thick steel is easier with a coarse hacksaw blade (one with fewer teeth) than a fine one.

To learn more about hacksaw, refer to the below link:

https://brainly.com/question/15611752

#SPJ2

Answer:

current_price = int(input("Enter the current price: "))

last_months_price = int(input("Enter the last month's price: "))

print("This house is $" + str(current_price))

print("The change is $" + str(current_price - last_months_price) + " since last month")

print("The estimated monthly mortgage is ${:.2f}".format((current_price * 0.051) / 12))

Explanation:

Ask the user to enter the current price and last month's price

Print the current price

Print the change in the price, subtract the last month's price from the current price

Print the estimated monthly mortgage, use the given formula to calculate, in required format

Answer:

for loop statement is not complete

Answer:

#include <iostream>

using namespace std;

int main()

{

   const int YEAR = 2050;

   int currentYear = 2020;

   int currentAge = 38;

   cout<<"You will be " << currentAge + (YEAR - currentYear) << " years old in " << YEAR;

   return 0;

}

Explanation:

Initialize the YEAR as a constant and set it to 2050

Initialize the currentYear as 2020, and currentAge as 38

Calculate and print the age in 2050 (Subtract the currentYear from the YEAR and add it to the currentAge)

Answer:

0.119

Explanation:

50 independent fair games

Mean will be 50/2 = 25

Standard deviation of the loosing probability is :

[tex]\sqrt{50*0.5*0.5}[/tex] * 10 = 33.536

we have to loose 33 times out of 50 games.

To find the approximate probability we use z- value table.

z value =  [tex]\frac{33-25}{3.35}[/tex]

z - value = 2.2659

Looking at the z-value table we get 0.119.

Answer:

Both b and c

Explanation:

Dotted Decimal notation is a presentation of numerical data which is expressed as decimal numbers separated by full stops. Dotted decimal notation expresses each eight bit sections of 32 bit numbers as decimal value. It provides convenient notation which is easy to understand by the people who are IT experts.