when this enzyme catalyze the reaction, the activation energy barrier changes by 27.6 kj/mol for the forward rate constant. how will the activation energy barrier change for the reverse rate constant in this catalyzed reaction?

If there is exactly one molecule of solute in one liter of solution, the concentration is 66x10^-24 M.

The term might or might not include ions that fit this specification depending on the context. A molecule is a grouping of two or more atoms that are held together by the chemical bonds that act as attractive forces. Two or more atoms of the same or different element that are joined together to form a molecule are referred to as molecules. A molecule can be heteronuclear, which is a chemical compound made up of more than one element, like water, or homonuclear, which implies it is made up of atoms of one chemical element, like oxygen (O2) (H2O).

Subtract the empirical formula mass from the molar mass of the compound. The outcome must be a whole number or a number that is very close to a whole number. Divide the whole number from step 2 by each subscript in the empirical formula. The molecular equation is the end result.

A mole is defined as6.02x10^23 particles, or molecules in this case. Utilize this connection as a conversion factor:

(One mole/6.02x10^23 molecules)

When there is only one molecule present, use the following conversion factor to determine the solute's moles:

(1 molecule) / (1 mole) / (6.02x10^23 molecules) = 1.66 x 1024 moles.

When the molecules cancel, only moles are left.

The number of moles of a solute per liter is concentration by definition. Divide the 1.66x10^-24 moles by the 1.0L volume to get the following result:

1.66x10-241.66x10^-24 molar, or 1.66x10^-24 M, is the result of dividing 1.66x10^-24 moles of solute by 1.0 liter.

To know more about Molecule visit:

https://brainly.com/question/1446104

#SPJ4

If the mass of the magnesium oxide collected is 0.224 g then the 0.296g solid magnesium is E) Limiting reagent

Limiting reagent is a term used in chemistry to describe a reactant that is completely used up in a reaction in which it is involved and therefore this reagent determines when the reaction stops.

Magnesium burns brightly because the reaction releases a lot of heat. Because of this exothermic reaction, magnesium gives two electrons to oxygen, forming the product which is powdery magnesium oxide.

The reaction of magnesium with oxygen can be illustrated as follows;

[tex]2Mg + O_{2} ---- > 2MgO[/tex]

As per the reaction, 2 moles of magnesium react with 1 mole of oxygen therefore magnesium produces less magnesium oxide as compared to oxygen and thus is the limiting reagent in this reaction.

Although a part of your question is incorrect, you might be referring to this question:

A 0.296 g piece of solid magnesium reacts with gaseous oxygen from the atmosphere to form solid magnesium oxide. In the laboratory, a student weighs the mass of the magnesium oxide collected from this reaction as 0.224 g The 0.296 g solid magnesium is the

Choose one:

O A actual yield

O B theoretical yield

O C excess reagent

O D. percent yield

O E limiting reagent

To learn more about limiting reagents; click here:

https://brainly.com/question/26905271

#SPJ4

17/10 cups of flour would it take to make 1 cake.

It is given that,

A recipe calls for 17/2 cups of flour to make 5 cakes.

We need to find the no of cups of flor require to make 1 cake.

5 cakes = 17/2 cups of floor

1 cup =

[tex]=\frac{17}{2}.\frac{1}{5} \\=\frac{17}{10}[/tex]

Therefore, 17/10 cups of floor are needed to make 1 cake.

To learn more about cups of flour from the given link.

https://brainly.com/question/1955459

#SPJ4

The precipitate that will be formed at the end of the reaction would be Barium sulphate.

Solubility is the new bond formation between the solute molecules and the solvent molecules. In terms of quantity, solubility is the maximum concentration of solute that dissolves in a known concentration of solvent at any given temperature.

We need to consider each ionic compound (both the reactants and the possible products) in light of the solubility rules. If a compound is soluble, we use the (aq) label with it, indicating that it dissolves. If a compound is not soluble, we use the (s) label with it and assume that it will precipitate out of solution

Barium chloride and potassium sulfate are both ionic compounds. We would expect them to undergo a double displacement reaction with each other.

BaCl2 + K2SO4  BaSO4 + 2 KCl

By examining the solubility rules we see that, while most sulfates are soluble, barium sulfate is not. Because it is insoluble in water we know that it is the precipitate. As all of the other substances are soluble in water we can rewrite the equation.

BaCl2(aq) + K2SO4(aq)  BaSO4(s) + 2 KCl(aq)

To know more about precipitate

https://brainly.com/question/18109776

#SPJ4

The answer to this question will be = True

The process behind the conversion of a solid state to a liquid state is called melting and the process behind it is called Enthalpy of Fusion or Heat of Fusion, when heat energy is added to any solid the particles inside it start to expand due to the heat of fusion and the particles lose their solid property and due to the expansion of molecules of solid, it changes into a liquid.

Hybridization in ethylene molecule (C2H4) occurs due to the overlapping of the two 2s atomic orbitals as well as one 2p atomic orbital of the two carbon atoms.

This overlapping produces four identical sp hybrid orbitals, each containing one electron from each carbon atom. Hybridization allows the bonding between the two carbon atoms, forming the carbon-carbon double bond. The sp2 hybridization of the carbon atoms results in the formation of a linear shape of the ethylene molecule.

The two unhybridized p atomic orbitals of the two carbon atoms lie perpendicular to each other. This results in the formation of a π bond between the two carbon atoms, as the electrons in the two unhybridized p orbitals can move freely between the two carbon atoms.

The linear shape of the ethylene molecule is due to the fact that the two sp2 hybrid orbitals of the two carbon atoms are oriented in opposite directions and are parallel to each other. The two hydrogen atoms are bonded to the carbon atoms through single covalent bonds, forming the carbon-hydrogen single bonds.

To know more about sp hybridization, click below:

https://brainly.com/question/13598024

#SPJ4

The chemical equations of the following compounds shows their respective pH. Chemical equations are given below.

Chemical Equations

A equation that consists of reactants, products and an arrow showing the direction of reaction is known as a chemical equation. The equation is said to be balanced chemical equation when the number of atoms of all the molecules is equal on both sides of the equation.

For Al(NO₃)₃

Al(NO₃)₃ + H₂O → Al³⁺ + 3NO₃⁻

Al³⁺ + 6H₂O ⇄ Al(H₂O)₆³⁺

Al(H₂O)₆³⁺ + H₂O ⇄ Al(OH)(H₂O)₅²⁺ + H₃O⁺

pH > 7

For Zn(NO₃)₂

Zn(NO₃)₂ → Zn²⁺ + 2NO₃⁻

Zn(H₂O)₆³⁺ + H₂O ⇄ Zn(OH)(H₂O)₅²⁺ + H₃O⁺

pH < 7

For NH₄NO₃

NH₄NO₃ → NH₄⁺ + NO₃⁻

NH₄⁺ + H₂O ⇄ NH₃ + H₃O⁺

pH < 7

Learn more about balanced chemical equation from the link given below.

https://brainly.com/question/11852878

#SPJ4

The 156 grams of water that were created when 2.9 moles if ethanol were burned.

Drugs, plastics, varnishes, polishes, plasticizers, etc. cosmetics are all made with ethanol. Ethanol is utilized in medicine as an antidote for glycol or methanol overdose as well as a topical antiinfective.

Intoxication with ethanol is frequent in older adolescents and adults. A child's toxic dosage is 3 mg/dL, but an adult's hazardous dose is 5 mg/dL. Children are more likely than adults to get hypoglycemia after a single intake.

C₂H₅OH + 3O₂ ⇒2CO₂ + 3 H₂O

Given

Took ethanol moles = 2.9

Since 1 mole of ethanol produces 1 mole of water = 54gram

2.9 mole of ethanol produces = 2.9 x 54 g

= 156 gram of water.

To know more about Ethanol visit:

https://brainly.com/question/19653906

#SPJ4

Neutralization is a chemical reaction in which acid and a base react quantitatively with each other. The product obtained here is salt and water. It is even called as a double replacement reaction.

How can we calculate volume after neutralization process?

KHC8H4O4 is potassium hydrogen phthalate (KHP).

The balanced equation for the reaction:

KHC8H4O4 + NaOH ==> KNaC8H4O4 + HOH

So, the stoichiometry is 1 moles NaOH needed for 1 mole of KHP.

Molar mass of KHP = 204 g/mol

Thus, volume after neutralization process is

= 1.800 g KHP x 1 mole KHP/204 g

= 0.00882 moles

It will take 0.00882 moles of NaOH to neutralize this.

To know more about neutralization, click on https://brainly.com/question/23008798

#SPJ4

The correct lewis dot symbol for the chloride ion Cl⁻ is given as follows :    

            ..

          : Cl :⁻

             °°

The chlorine atomic number is 17. The chlorine is place in the group 17 and the period 3 in the periodic table. the electronic configuration oif chlorine is given as :

₁₇Cl = [ Ne ] 3s² 3p⁵

The electrons present in the outer most shell in the chlorine is 7. in the chlorine ion Cl⁻ means one extra electron is added to the chlorine and this shows by the negative charge and the symbol for chlorine ion is Cl⁻ . the lewis dot structure is given above.

To learn more about lewis dot here

https://brainly.com/question/25453559

#SPJ4

This leads to the decreasing the volume will shift equilibrium in the direction of products.

Chemical equilibrium is the condition in which the reactants and products are both present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. In a state of neutral equilibrium, when an external force is applied, the line connecting the earth's centre and the centre of gravity falls within the base of the body.

A product is anything that can be provided to a market in order to satiate a customer's need or desire. It can be an item, a system, or a service that is made accessible for consumer usage in response to consumer demand. An insurance policy is an example of an intangible product because it can only be understood through indirect perception.

learn more about equilibrium here

https://brainly.com/question/8983535

#SPJ4

Nitromethane, ch3no2 has a nitrogen atom with sp2 hybridization.

With the chemical formula CH3NO2, nitromethane, or just "nitro," is an organic molecule. The simplest organic nitro compound is this one. It is a polar liquid that is frequently used in extractions, as a reaction medium, and as a cleaning solvent in a range of industrial applications. It is frequently employed in the production of insecticides, explosives, textiles, and coatings as an intermediate in organic synthesis. In a variety of motorsports and pastimes, including Top Fuel drag racing and the miniature internal combustion engines used in radio-controlled, control-line, and free-flight model aircraft, nitromethane is utilized as a fuel additive. This is called Nitromethane.

To learn more about Nitromethane visit here;

https://brainly.com/question/19578949

#SPJ4

The reaction of Sodium hydroxide and Tin(iv) acetate is as follows:

Sodium Hydroxide + Tin(IV) Acetate = Sodium Acetate + Tin(IV) Hydroxide

NaOH + Sn(C2H3O2)4 = C2H3NaO2 + Sn(OH)4

Balanced Chemical Equation:

4NaOH + Sn(C2H3O2)4 → 4C2H3NaO2 + Sn(OH)4

What is an Aqueous solution?

An aqueous solution is one in which water serves as the solvent. It is also known as a water-based solution. Many common chemical substances are dissolved in water, and these are called aqueous solutions. Examples of aqueous solutions include saltwater, vinegar, and sugar water.

What is Sodium hydroxide?

Sodium hydroxide, also known as lye or caustic soda, is a white, solid crystalline substance used in a number of industrial and household applications. It is a strong base that is highly soluble in water and can be used to adjust the pH of a solution. It is also used in the manufacture of soaps, detergents, and cleaning products.

What is Tin(IV)?

Tin(IV) is the chemical name for tin, which is a chemical element with the atomic number of 50. It is a silvery-white, malleable metal that is used in a variety of applications, including alloys, solders, and some electronics.

To know more about Sodium hydroxide,

LINK- https://brainly.com/question/29509565

CODE- #SPJ4

Moving from left to right across a period in the periodic table results in a decrease in metallic character. This happens because atoms are more willing to take electrons in order to fill a valence shell.

An electron in an atom's outer shell is known as a valence shell, and if the outer shell is open, the valence electron can take part in the formation of a chemical bond. One valence electron from each atom in the link is contributed to form a shared pair in a single covalent bond. The chemical characteristics of an element can be influenced by valence shell density.

The chemical elements are arranged in rows and columns on what is known as the periodic table, or table of the elements. It is commonly regarded as an icon of chemistry and is used extensively in physics, chemistry, and other sciences. Chemical properties of elements in the same group on the periodic table are similar.

learn more about valence shell here

https://brainly.com/question/20861869

#SPJ4

Fatty acid molecules with single bonds between some carbons and double bonds between some carbons are Saturated and unsaturated fatty acids.

A fatty acid is an aliphatic carboxylic acid having a saturated or unsaturated chain that is used in chemistry, notably in biochemistry.

The majority of fatty acids that are found in nature contain an unbranched chain with an even number of carbon atoms, ranging from 4 to 28.

Saturated, monounsaturated, polyunsaturated, and trans fats are the four main categories of fatty acids. An elevated risk of coronary heart disease is linked to trans fats and saturated fatty acids.

To learn more about fatty acid refer :

https://brainly.com/question/17352723

#SPJ4

If 61. 3 g ions cl2 react to excess pcl3 to generate 119. 3 g of pcl5, the percent yield again for combination pcl3(g) Plus cl2(g) pcl5(g) will be 66.3%.

The meaning of percent yield is?

The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield. Actual Yield / Percent Yield Theory Yield) = 100% There are various reasons why a chemical reaction's actual yield could be lower than its theoretical yield; these will be covered in more detail in subsequent stories of the course.

Is a high or low yield preferable?

A low-yield bond is preferable for investors seeking a nearly risk-free investment or for those who are hedging their mixed portfolio by holding some of it in low-risk securities. The

Briefing:

Theoretical yield = 61.3 g Cl2 ( 1 mol / 70.9 g) ( 1 mol PCl5 / 1 mol Cl2 ) ( 208.2 g / 1 mol ) = 180.01 g PCl5

Percent yield = 119.3 g / 180.01 g x100 = 66.3%

To know more about percent yield visit:

https://brainly.com/question/26430784

#SPJ4

The initial potassium hydroxide solution has a molarity of 0.57M.

Step 1: Acidic HNO3 + KOH Solution

To locate nitric acid moles:

(1.12 mol/L x (0.0468 L) = 0.052 mol HNO3

To locate KOH moles:

KOH's molarity is determined by the formula (0.0279 L)(x) = 0.0279x mol KOH.

Although we are unable to precisely calculate the moles of KOH added, we do know that adding basic KOH to acidic HNO3 still produces an acidic solution, indicating that about 0.052 moles of KOH were added. To completely neutralize the 0.052 mol of acid, step 2 will add the last moles of -OH.

Step 2: Ba neutralizes the Solution (OH)

2

[tex]Ba(OH)_{2}[/tex] mole detection:

0.018 mol  [tex]Ba(OH)_{2}[/tex] is equal to (0.0190 L)(0.968mol/L).

To calculate the moles of -OH in 0.018 mol of Ba(OH)

2 0.018 mol Ba (OH)

0.036 mol -OH is equal to 2 times (2 mol -OH / 1 mol [tex]Ba(OH)_{2}[/tex]).

It is neutralized in this stage. Remember that by incorporating 1 mol of [tex]Ba(OH)_{2}[/tex], we actually incorporate 2 molar equivalents of -OH. We attain neutralization after 0.036 mol of -OH has been added.

Neutralization: The formula is (moles of HNO3) - (moles of -OH)

= 0 (0.052 mol) - (0.0279x + 0.036)

= 0 0.016 = 0.0279x

x = 0.57 M.

To learn more about molarity, refer:-

https://brainly.com/question/8732513

#SPJ4

Toilet bowl cleaner contain hydrochloric acid, which dissolves calcium carbonate in a toilet bowl. The mass of calcium carbonate dissolved is 5.28g.

To find out the mass, first write the balanced reaction. The balanced reaction between calcium carbonate and hydrochloric acid is

CaCO₃+2HCl→CaCl₂+H₂O+CO₂

The molar mass of HCl is 36g/mol. Hence, the number of moles for HCl is

moles=3.8 g×(1 mol/36 g)

moles=0.1055 mol

Using moles of HCl, find out moles of CaCO₃. Since mol to mol ratio for HCl to CaCO₃ is 2:1. Therefore, moles of CaCO₃ required is

0.1055 mol HCl×(1 mol CaCO₃/2 mol HCl)

=0.05275 mol CaCO₃

Convert the above moles in the mass. The molar mass of CaCO₃ is

Molar mass=[40+12+(3×16)]g/mol

=(40+12+48)g/mol

=100 g/mol

Hence, the mass of CaCO₃ is

mass=0.05275 mol CaCO₃×(100 g CaCO₃/1 mol CaCO₃)

=5.275 g CaCO₃

=5.28g CaCO₃

Therefore, the mass of calcium carbonate(CaCO₃) dissolved by 3.8g of HCl is 5.28g.

To know more about balanced reactions

https://brainly.com/question/29215391

#SPJ4

Heating the aspirin speeds up the reaction time. A vinegar-like smell is produced which is acetic acid.

Describe how aspirin is synthesized?

Salicylic acid and acetic acid can be combined to create aspirin in the presence of a catalyst that is also an acid. Together with the carboxyl group on acetic acid, the phenol group on salicylic acid produces an ester. Nevertheless, the yield of this reaction is little, and it is sluggish. The reaction is more faster and has a greater yield when acetic anhydride is used in place of acetic acid (since acetic anhydride is much more reactive than acetic acid).

To know more about aspirin, check out https://brainly.com/question/25794846

#SPJ4

A bonding electron is more likely to exist in the domain tagged by Box B because the oxygen nucleus has a stronger enchantment for electrons than the carbon nucleus.

What is Electron?

An electron is a negatively charged subatomic molecule. It can be either free, or confined to the nucleus of an atom. Electrons in atoms exist in spherical coat of several radii, representing energy levels.

What is nucleus?

The nucleus has been plainly described as a membrane-bound structure that includes the genetic article of a cell.

To know more about Electron, visit:-

https://brainly.com/question/13998346

#SPJ4

When 8.0 g of N₂H₄ (32 g mol⁻¹) and 92 g of N₂O₄ (92 g mol⁻¹) are mixed and react according to the equation above, the maximum mass of H₂O that can be produced is 9 g.

The equation of the reaction of N₂H₄ and N₂O₄ is given by,

2N₂H₄ (g) + N₂O₄ (g) ↔3N₂ (g) + 4H₂O (g)

Mass of N₂O₄ is given by = (2×14+4×16)                                            

                                          = 92 g            

Mass of N₂H₄ is given by = 2 (2×14+4)                                            

                                          = 64 g

As per the stochiometric equation, 64 g of N₂H₄ reacts with 92 g of N₂O₄  8 g of N₂H₄ reacts with

= 92/64 × 8 =11.5 g of N₂O₄

But the given amount of N₂O₄ is 92 g. So N₂H₄ acts as a limiting reagent.

64 g of N₂H₄ gives

4 × 18 = 72 g of water

8 g of N₂H₄ gives

72/64 × 8 = 9 g of water

The mass of water is 9g.

To know more about limiting reactants, click below:

https://brainly.com/question/24945784

#SPJ4

In all applications of the hydrogen electrode under standard circumstances, the metal hydrogen gas is formed.

Redox half cell is the foundation of the hydrogen electrode: 2 H+(aq) + 2 e− → H2 (g) A platinum electrode with platinization is the site of this redox process. Pure hydrogen gas is bubbled through the electrode after it has been immersed in an acidic solution. Both the reduced form and the oxidised form's concentration are kept at unity. An electrode with an assigned potential of zero to which all other electrode potentials are referred for comparison is typically made of platinum black on platinum and is over which a stream of hydrogen is bubbled when certain conditions are met.

For measurements of electrode potential, the hydrogen electrode is utilised as a reference. It is the most significant electrode for usage in aqueous solutions, theoretically. The reversible hydrogen electrode displays a potential that is thought to be zero at all temperatures in a solution of hydrogen ions with unit activity. Hydrogen is declared to have zero standard electrode potential.

To know more about Hydrogen Electrode visit:

https://brainly.com/question/28198248

#SPJ4

Dipoles are held together by the attraction between the opposingly charged ends of the different molecules for each other.

The positive end of one polar molecule and the negative end of another polar molecule are attracted to one another by dipole-dipole forces. Strengths of dipole-dipole forces per mole range from 5 kJ to 20 kJ.

When two dipolar molecules interact with each other over space, dipole-dipole interactions are the consequence. When this happens, one of the polar molecules' partially negative portion is drawn to the partially positive component of the second polar molecule.

Between molecules with permanent dipoles, there are dipole-dipole forces (i.e., polar molecules). These forces become stronger with increasing polarity for molecules with identical size and mass. Additionally, nonpolar molecules can develop dipoles as a result of polar molecules, producing dipole-induced dipole forces.

For more questions like Dipoles click the link below:

https://brainly.com/question/15571189

#SPJ4

As atom size grows, the bond dissociation energy of the halogen family decreases down the group.

The bond strength increases with bond length. A shorter bond results from a greater bond order for a given pair of atoms. The energy needed to dissolve a bond is known as the bond dissociation energy (BDE). The BDE is always positive since the production of a bond releases energy (H 0), but the breaking of a bond involves the intake of energy (H > 0). The weak attractive interactions that exist between the individual molecules of a molecular covalent material are known as intermolecular forces. The bond dissociation energy, or the amount of energy needed to dissolve a given covalent bond, is a measure of the bond's strength. molecules in a mole. Multiple bonds between the same atoms are more powerful than a single bond. I will have the weakest bond strength and F will have the strongest bond when it comes to electronegativity.

To learn more about dissociation please click on below link

https://brainly.com/question/20430933

#SPJ4

4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄ is the balanced equation.

First write the complete equation

LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄

Now balance the given equation

LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄

Reactant Side Product side

Li= 1 Li = 2

Br = 1 S = 1

Co = 1 Co = 1

S = 2 S = 1

O = 8 O = 4

We can see that there are 8 oxygen atom in yhe Reactant side and 4 in the product side. So multiply by 2 in the product side to balance the Oxygen atoms.

4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄

We can see that the given equation is now balanced.

Learn more about the Balanced equation here: https://brainly.com/question/26227625

QUESTION: Write the complete equation and also balanced the equation.

_LiBr + _ Co(SO₄)₂ --> _ + _

A chemical has hydroxyl groups as its main functional group, hence choice c is accurate. Probably an alcoholic beverage. The substance's primary functional group is a hydroxyl group.

Is referred to as either Alcohols or Carboxylic Acids. Because the hydroxyl group has a hydrophilic character, which means it draws water to itself, it dissolves readily in water. The specific group of atoms in molecules that are in charge of the molecules' distinctive chemical reactions is referred to as a functional group. The hydroxyl group is the functional group that has been provided to us, and its functional formula is -OH. Alcohol is the name given to a substance that contains hydroxyl groups. Hence the compound is alcohol.

Learn more about hydroxyl group here

https://brainly.com/question/23639315

#SPJ4

The coefficients in front of the reactions are cr =2 and  cl2 i= 3.

In chemistry, a solution is a special type of homogeneous mixture composed of two or greater materials. In this sort of mixture, a solute is a substance dissolved in another substance, called a solvent.

The solution is a homogeneous aggregate of 1 or extra solutes dissolved in a solvent. solvent: the substance in which a solute dissolves to supply a homogeneous aggregate. solute: the substance that dissolves in a solvent to produce a homogeneous combination.

The constituent debris of a solution is smaller than 10-9 meters in diameter. Constituent particles of a solution can not be visible to the eye. Solutions no longer scatter a beam of mild passing through it.

Learn more about the solution here:-https://brainly.com/question/17145398

#SPJ4

Yes, this statement is true that solubility curves are used to determine if a solution is unsaturated, saturated, or supersaturated at a specific pressure.

What do you mean by solubility curves?

The solubility of a solid in a given solvent is defined as the number of grams of the solute required to saturate 100g of the solvent at a particular temperature. The solubility of a given substance at a given temperature can be determined from its solubility curve. Solubility curve can be used to determine the amount of substance deposited when the solution is cooled. Solubilities of different substances at a particular temperature can be determined.

When any solid is in contact with its solution for sufficient time, then the solid will dissolve if the solution is not saturated or solid will grow at the expense of the solution if the solution is supersaturated. In any case, the solubility curve represents equilibrium conditions.

To know more about solubility curves from the given link:

https://brainly.com/question/19997465

#SPJ4