Answers
Answer:
Most stable: 2,3-dimethylpent-2-ene > (E)-3,4-dimethylpent-2-ene > (Z)-3,4-dimethylpent-2-ene > 2-methyl-3-methylenepentane : Least stable
Explanation:
Treatment of NaOH with (R)-3-bromo-2,3-dimethylpentane results in the elimination of HBr. Each H atoms present on each [tex]\beta[/tex]-carbon atoms can be eliminated result in the formation of four possible products: (1) 2,3-dimethylpent-2-ene, (2) (E)-3,4-dimethylpent-2-ene, (3) (Z)-3,4-dimethylpent-2-ene and (4) 2-methyl-3-methylenepentane.
The stability of these alkenes depends on the number of hyperconjugative H atoms present with respect to the double bond. In accordance with this, 2,3-dimethylpent-2-ene is the most stable alkene (11-hyperconjugative H atoms). Then, 3,4-dimethylpent-2-ene is the second most stable alkene (7-hyperconjugative H atoms). Among (E)-3,4-dimethylpent-2-ene and (Z)-3,4-dimethylpent-2-ene, (E)-3,4-dimethylpent-2-ene is more stable due to it's less sterically hindered structure. 2-methyl-3-methylenepentane is the least stable alkene (3-hyperconjugative H atoms).
So, decreasing order of stability of alkenes from most stable to least stable:
2,3-dimethylpent-2-ene > (E)-3,4-dimethylpent-2-ene > (Z)-3,4-dimethylpent-2-ene > 2-methyl-3-methylenepentane
Three bromo As just a result of the nucleophilic substitution mechanism, 2,4 dimethylpentane generates a racemic mix containing both the r and s forms of the molecule.
In the first, sluggish phase, a two-degree cation with a positive charge is produced at carbon 3, and then it undergoes rearrangement to a 3-degree carbocation at carbon 2 either from the side. So because carbocation only has 6 electrons in its outermost shell, it is sp2 hybridized and thus planar in structure. In step two then occurs, as well as the attack of the -OH group, as the -OH (hydroxyl) group can strike from either side (top or bottom), leading to the formation of a racemic mixture of 2,4 dimethyl pentane-2-ol.This quantity of alpha-hydrogens in an alkyl group can be used to determine its stability. The greater the number of alpha-hydrogens inside an alkene, the overall larger the number of hyperconjugated structures, and thus the greater the stability. Due to the obvious symmetrical structure of a trans-isomer, whenever the amount of alpha-hydrogens is the same, the trans-alkene isomer is much more stable than that of the cis-alkene isomer.Please find the attached file.
Learn more about the 3-Bromo-2,3-dimethylpentane:
brainly.com/question/7139334
Related Questions
How many grams of dipotassium succinate trihydrate (K2C4H4O4·3H2O, MW = 248.32 g/mol) must be added to 660.0 mL of a 0.0577 M succinic acid solution to produce a pH of 5.869 ? Succinic acid has pKa values of 4.207 (pKa1) and 5.636 (pKa2).
Answers
Answer:
the amount of grams of dipotassium succinate trihydrate K₂C₄H₄O₄·3H₂O = 41.798g
Explanation:
Given that:
The volume of [tex]K_2C_4H_4O_4.3H_2O[/tex] = 660.mL
The molarity of succinic acid = 0.0577 M
The pH of the solution = 5.869
The pKa₁ = 4.207
The pKa₂ = 5.636
The pKa₂ is required to be used for the determination of given that succinic acid is dissociated twice.
Using Henderson-HasselBalch Equation,
[tex]PH =pKa + log\dfrac{[Salt]}{[Acid]}[/tex]
we know that :
The volume of [tex]K_2C_4H_4O_4[/tex] = 660.mL
The molarity of succinic acid = 0.0577 M
number of moles = Molarity [tex]\times[/tex] Volume (liters)
number of moles = 0.0577 [tex]\times[/tex] 0.660 L
number of moles = 0.038082 mol
The balanced chemical reaction for this equation can be expressed as follows:
[tex]K_2C_4H_4O_4+C_4H_4O_4^{2-} \longleftrightarrow 2KC_4H_4O_4^-[/tex]
Here, the number of moles of [tex]K_2C_4H_4O_4= C_4H_4O_4^{2-}[/tex]
number of moles of [tex]2KC_4H_4O_4^-[/tex] = 2 × 0.038082 mol
number of moles of [tex]2KC_4H_4O_4^-[/tex] = 0.076164 mol
From the Henderson-HasselBalch Equation,
[tex]pH =pKa + log\dfrac{[Salt]}{[Acid]}[/tex]
[tex]pH =pKa_2 + log\dfrac{[K_2C_4H_4O_4]}{[KC_4H_4O_4^-]}[/tex]
[tex]pH =pKa_2 + log\dfrac{n_{K_2C_4H_4O_4}}{n_{KC_4H_4O_4^-}}[/tex]
[tex]5.869 =5.636+ log \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]
[tex]0.233= log \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]
[tex]10^{0.233}= \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]
[tex]1.710015315= \dfrac{n_{K_2C_4H_4O_4}}{0.076164 }[/tex]
[tex]1.710015315 \times 0.076164= n_{K_2C_4H_4O_4[/tex]
[tex]n_{K_2C_4H_4O_4}= 0.1302416[/tex]
SInce; the number of moles of [tex]K_2C_4H_4O_4= C_4H_4O_4^{2-}[/tex]
[tex]n_{C_4H_4O_4^{2-}} =[/tex]( 0.1302416 + 0.038082) mol
[tex]n_{C_4H_4O_4^{2-}} =[/tex] 0.1683236 mol
The grams of dipotassium succinate trihydrate = numbers of moles of dipotassium succinate trihydrate × Molar mass
The grams of dipotassium succinate trihydrate = 0.1683236 mol × 248.32 g/mol
The grams of dipotassium succinate trihydrate = 41.798g
Thus , the amount of grams of dipotassium succinate trihydrate K₂C₄H₄O₄·3H₂O = 41.798g
Mass of the condensed unknown liquid: 0.3175 g Temperature of the water bath: 99.00 oC Pressure of the gas: 748.2 mmHg Volume of the flask (volume of the gas): 145.0 mL Given : Kelvin = t oC + 273.15 1 L = 1000 mL 1 atm = 760 mmHg Gas constant: R = 0.08206 atm L / mole K; Ideal Gas Law: PV = nRT 1. What is the pressure of the gas in atm? (1 points) 2.
Answers
Answer:
1. 0.98 atm
Explanation:
The following data were obtained from the question:
Mass of unknown liquid (m) = 0.3175 g
Temperature (T) = 99 °C
Pressure (P) = 748.2 mmHg
Volume (V) = 145.0 mL
Gas constant (R) = 0.08206 atm.L/Kmol
1. Determination of the pressure in atm.
760 mmHg = 1 atm
Therefore,
748.2 mmHg = 748.2/760 = 0.98 atm
Therefore, the pressure in atm is 0.98 atm.
1. Methanol is a high-octane fuel used in high performance racing engines. 2 CH3OH(l) + 3O2(g) → 2CO2(g) + 4 H20(g) a) Calculate ∆H० and ∆S० using thermodynamic data, and then ∆G
Answers
Answer:
The reaction given in the question is:
2CH₃OH (l) + 3O₂ (g) ⇒ 2CO₂ (g) + 4H₂O (g)
The values of ΔH°formation and ΔS° of the reactants and products given in the reaction based on the thermodynamics data is:
ΔH°formation values of CH3OH (l) is -238.4 kJ/mol, CO2(g) is -393.52 kJ/mol, H2O (g) is -241.83 kJ/mol and O2 (g) is 0.
The S° values of CH3OH (l) is 127.19 J/molK, CO2(g) is 213.79 J/molK, H2O (g) is 188.84 J/moleK, and O2 (g) is 205.15 J/molK.
Now the values of ΔH° and ΔS° are,
ΔH°rxn = 2 * ΔH°formation CO2 (g) + 4 * ΔH°formation H2O (g) - 2*ΔH°formation CH3OH (l)
ΔH°rxn = 2 * (-393.52) + 4 (-241.83) -2 * (-238.4)
ΔH°rxn = -1277.56 kJ/mole
ΔS°rxn = 2 * S° CO2 (g) + 4 * S° H2O (g) - 2*S° CH3OH (l) - 3 * S° O2 (g)
ΔS°rxn = 2 * 213.79 + 4 * 188.84 - 2 * 127.19 - 3*205.15
ΔS°rxn = 313.11 J/mole/K
Now the formula for calculating ΔG°rxn is,
ΔG°rxn = ΔH°rxn - TΔS°rxn
ΔG°rxn = -1277.56 * 1000 J/mole - 298 * 313.11 J/mole
ΔG°rxn = -1370.86 kJ/mol
Draw the structure of 1,4-hexanediamine.
Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced TemplateTowbars. The single bond is active by default. Include all hydrogen atoms.
View Available Hint(s)
Answers
Answer:
1,4-hexanediamine contains two [tex]-NH_{2}[/tex] functional groups.
Explanation:
1,4-hexanediamine is an organic molecule which contains two [tex]-NH_{2}[/tex] functional groups at C-1 and C-4 position.
The longest carbon chain in 1,4-hexanediamine contains six carbon atoms.
Molecular formula of 1,4-hexanediamine is [tex]C_{6}H_{16}N_{2}[/tex].
1,4-hexanediamine used as a bidentate ligand in organometallic chemistry.
The structure of 1,4-hexanediamine is shown below.
Balance this equation: __ UO2(s) + __ HF(ℓ) → __ UF4(s) + __ H2O(ℓ) Though you would not normally do so, enter the coefficient of "1" if needed. UO2(s) HF(ℓ) UF4(s) H2O(ℓ)
Answers
Answer:
The balanced equation is given below:
UO2(s) + 4HF(l) —› UF4(s) + 2H2O(l)
The coefficients are: 1, 4, 1, 2
Explanation:
UO2(s) + HF(l) —› UF4(s) + H2O(l)
The above equation can be balance as follow:
There are 2 atoms of O on the left side and 1 atom on the right side. It can be balanced by writing 2 in front of H2O as shown below:
UO2(s) + HF(l) —› UF4(s) + 2H2O(l)
There are 4 atoms of F on the right side and 1 atom on the left side. It can be balanced by writing 4 in front of HF as shown below:
UO2(s) + 4HF(l) —› UF4(s) + 2H2O(l)
Now, the equation is balanced.
The coefficients are: 1, 4, 1, 2.
For the following reaction at equilibrium, which gives a change that will shift the position of equilibrium to favor formation of more products? 2NOBr(g) 2NO(g) + Br 2(g), ΔHº rxn = 30 kJ/mol
Answers
Answer:
Based on the given reaction, it is evident that the reaction is endothermic as indicated by a positive sign of enthalpy of reaction. Thus, it can be stated that the favoring of the forward reaction will take place by upsurging the temperature of the reaction mixture.
Apart from this, based on Le Chatelier’s principle, any modification in the quantity of any species is performed at equilibrium and the reaction will move in such an orientation so that the effect of the change gets minimized. Therefore, a slight enhancement in the concentration of the reactant will accelerate the reaction in the forward direction and hence more formation of the product takes place.
Fill in the blanks
1. the ____ atoms of the ____ groups and the hydrogen atoms attached to the ____ atoms form ____.
(answer choices; nitrogen, carbon, a-helices or b-pleated sheets, carbonyl, globular of firbrous structures, oxygen, amino, random coil, thiol)
2. In the a helix, hydrogen bonds form between the ____ oxygen atom and the ____ hydrogen atom of a peptide bond in _____. In the B-pleasted sheet, hydrogen bonds form between the ____ oxygen atom and the ____ hydrogen atom of a peptide bond in ____.
(answer choices; parallell sections of a long polypeptide chain, the next amino acid unit, carboxyl, the next turn of the helical chain, thiol, amino, carbonyl)
Answers
Answer:
1. oxygen; carbonyl; nitrogen; α-helices or β-pleated sheets
2. carbonyl; amino; the next turn of the helical chain; carbonyl; amino; parallel sections of a long polypeptide chain.
Explanation:
The secondary structure of proteins is of two major conformations, the α helix and β conformations which are very stable.
1. The oxygen atoms of the carbonyl groups and the hydrogen atoms attached to the nitrogen atoms form α-helices or β-pleated sheets.
2. In the α-helix, hydrogen bonds form between the carbonyl oxygen atom and the amino hydrogen atom of a peptide bond in the next turn of the helical chain. In the β-pleated sheet, hydrogen bonds form between the carbonyl oxygen atom and the amino hydrogen atom of a peptide bond in parallel sections of a long polypeptide chain.
A four carbon chain; the second carbon is also single bonded to CH3. Spell out the full name of the compound
Answers
Answer:
This description shows a methyl group.
Explanation:
Which best describes the total mass of a sample of water when it condenses
from a liquid to a gas?
A. The mass is less because the water molecules get closer together
and take up more space.
B. The mass is the same because the decrease in energy equals the
increase in the number of molecules.
C. The mass is the same because water molecules are not created or
destroyed during a phase change.
D. The mass is greater after water condenses because the mass of
the molecules increases.
Answers
Answer:
Its C I hopefully help you
If phosphorus (P) has 4 naturally occurring isotopes, phosphorus-29(32.7.%), phosphorus-30(48.03%), phosphorus-31(18.4%), and phosphorus-33 (0.87%), what is its average r.a.m.?
Answers
The Average atomic mass of phosphorus is 29.9.
What is Average atomic mass ?The average atomic mass (sometimes called atomic weight) of an element is the weighted average mass of the atoms in a naturally occurring sample of the element.
Average masses are generally expressed in unified atomic mass units (u), where 1 u is equal to exactly one-twelfth the mass of a neutral atom of carbon-12.
An element can have differing numbers of neutrons in its nucleus, but it always has the same number of protons.
The versions of an element with different neutrons have different masses and are called isotopes.
The average atomic mass for an element is calculated by summing the masses of the element’s isotopes, each multiplied by its natural abundance on Earth i.e,
Average atomic mass of P = ∑(Isotope mass) (its abundance)
∴ Average atomic mass of P = (P-29 mass) (its abundance) + (P-30 mass)(its abundance) + (P-31 mass) (its abundance) + (P-33 mass) (its abundance)
Abundance of isotope = % of the isotope / 100.
∴ Average atomic mass of P = (29)(0.327) + (30)(0.4803) + (31)(0.184) + (33)(0.0087) = 29.88 a.m.u ≅ 29.9 a.m.u.
Hence , The Average atomic mass of phosphorus is 29.9.
Learn more about Average atomic mass here ;
https://brainly.com/question/21025876
#SPJ1
A compound is found to contain 18.28 % phosphorus , 18.93 % sulfur , and 62.78 % chlorine by mass. To answer the question, enter the elements in the order presented above. QUESTION 1: The empirical formula for this compound is . QUESTION 2: The molar mass for this compound is 169.4 g/mol. The molecular formula for this compound is
Answers
Answer:
1. EF = PSCl₃; 2. MF = PSCl₃
Explanation:
1. Empirical formula
The empirical formula is the simplest whole-number ratio of atoms in a compound.
The ratio of atoms is the same as the ratio of moles.
So, our first job is to calculate the molar ratio of P:S:Cl.
Assume 100 g of the compound.
(a) Calculate the mass of each element.
Then we have 18.28 g P, 18.93 g S, and 67.28 g Cl.
(b) Calculate the moles of each element
[tex]\text{Moles of P} = \text{18.28 g C} \times \dfrac{\text{1 mol P}}{\text{30.97 g P}} = \text{0.5902 mol P}\\\\\text{Moles of S} = \text{18.93 g S} \times \dfrac{\text{1 mol S}}{\text{32.06 g S }} = \text{0.5905 mol S}\\\\\text{Moles of Cl} = \text{62.78 g Cl} \times \dfrac{\text{1 mol Cl}}{\text{35.45 g Cl }} = \text{1.771 mol Cl}[/tex]
(c) Calculate the molar ratio of the elements
Divide each number by the smallest number of moles
P:S:Cl = 0.5902:0.5905:1.898 = 1:1.000:3.000 ≈ 1:1:3
(d) Write the empirical formula
EF = PSCl₃
The empirical formula for this compound is PSCl₃.
2. Molecular formula
(a) Calculate the ratio of the molecular and empirical formula masses
n = (169.4 u)/(169.40 u) = 1.000 ≈ 1
(b) Calculate the molecular formula
MF = (EF)ₙ = (EF)₁ = PSCl₃
The molecular formula for this compound is PSCl₃.
This pluton occurs deep in Earth and does not cause any changes to the surface of Earth . True or False
Answers
Answer:
The given statement is false.
Explanation:
However, if the pluton exists beneath the ground, this could be conveniently shown in the illustration something from the peak such pluton appears convex in form resembling a lopolith and perhaps diapir, which would be a particular form of statistically significant pluton recognized as the sill.Mostly from the figure it could also be shown that subsurface sheets are lined or curved, throughout the pluton mold. And therefore it is inferred that such a pluton creates adjustment to something like the ground atmosphere by altering the form of the levels above it.So that the given is incorrect.
What is the percent composition of sulfur in SO2?
OA
32.1 g
(32.1 g + 16.0 g + 16.0 g)
x 100%
32.1 g
O B.
x 100%
(16.0 g + 16.0 g)
O c.
(32.1 g + 16.0 g + 16.0 g)
X 100%
32.1 g
(32.1 g)(6.02 x 102)
O D.
100 g
Answers
Answer:
5 .04 percent.
Explanation:
it is also known as sulfur dioxide. so it's 5.0.4 percent.
Your question is incomplete. Read below to find the content.
0.4 % is the percent composition of sulfur in SO2.
How is SO2 prepared from sulfur?In the laboratory, sulfur dioxide is prepared by the reaction of metallic sulfite or a metallic bisulfite with dilute acid. For example, a reaction between the dilute sulphuric acid and sodium sulfite will result in the formation of SO2.
What do you mean by percentage composition?The percentage composition of a given compound is defined as the ratio of the amount of each element to the total amount of individual elements present in the compound multiplied by 100. Here, the quantity is measured in terms of grams of the elements present.
Learn more about percentage composition here: https://brainly.com/question/26150306
#SPJ2
The NMR spectrum of your final compound will contain extra peaks that were not present in your starting material. For what hydrogen nuclei do those peaks occur?
Answers
Answer:
The peaks are registered from tetramethyl silane (TMS)
Explanation:
Tetramethyl silane (TMS) is used as internal reference in proton nmr (H NMR) spectrometry.
Its peak is usually registered at about a 2.0 chemical shift means that the hydrogen atoms which caused that peak need a magnetic field two millionths less than the field needed by TMS to produce resonance. This is not affected by the chemical shift of the sample analysed.
I hope this helped.
Natural atom of the same element may have the same _________?
A)proton
B)neutron
C)electron
D)All
Answers
Answer:B
Explanation:
Answer: i think it is c
Explanation: i checked my textbook.
In this experiment, you will analyze your sample by TLC by spotting pure benzophenone and your product and eluting with 5:1 hexanes/ethyl acetate. Choose the statement that BEST describes what you should observe for a successful experiment.
A) The benzophenone in the standard and reaction samples should travel the farthest and will have the same Rf value. No unreacted benzhydrol should be observed at a lower Rf value.
B) The benzophenone in the standard and reaction samples should travel the least and will have the same Rf value. No unreacted benzhydrol should be observed at a higher Rf value.
C) The benzophenone in the standard and reaction samples should travel the farthest and will have the same Rf value. Unreacted benzhydrol should be observed at a lower Rf value.
D) The benzophenone in the standard and reaction samples should travel the farthest and will have the different Rf values. No unreacted benzhydrol should be observed at a lower Rf value.
Answers
Answer:
The correct answer is statement A.
Explanation:
In a media comprising 20 percent ethyl acetate/hexane, as the benzophenone is non-polar, so it will travel farther with high Rf value. On the other hand, as benzohydrol is a polar molecule, therefore, it should be at lower Rf value and will not rise in the given media.
For an experiment to be successful, there should not be any unreacted benzohydrol to be left in the experimental system. The benzophenone in the reaction as well as the standard samples should exhibit similar Rf value.
The benzophenone in the standard and reaction samples should travel the farthest and will have the same Rf value. No unreacted benzhydrol should be observed at a lower Rf value to analyze by TLC.
What is TLC ?In synthetic chemistry, thin-layer chromatography (TLC) is a method that is frequently used to identify compounds, assess their purity, and monitor the progress of a reaction. Additionally, it enables the solvent system for a specific separation problem to be optimized.
The foundation of TCL is the adsorption-based separation theory. The separation depends on how sensitive different chemicals are to the stationary and mobile phases.
TLC, or thin layer chromatography, is a technique for isolating the components of mixtures before analysis. TLC can be used to identify compounds, ascertain their identities, and ascertain the purity of a compound.
Thus, option A is correct.
To learn more about TLC, follow the link;
https://brainly.com/question/14393140
#SPJ2
18. Sucralose contains which two functional groups: (2 points)
A) benzene
B) halogen
C) carboxyl
D) hydroxy!
Answers
Answer:
The correct answer is option B and D, that is, halogen (chlorine) and hydroxyl.
Explanation:
An artificial sweetener and sugar substitute is sucralose. It is noncaloric as the majority of the sucralose ingested does not get dissociated within the body. The generation of sucralose takes place by the chlorination of sucrose. It is about 300 to 1000 times sweeter in comparison to sucrose.
The consumption of sucralose is safe for both nondiabetics and diabetics, it is used in various food and beverage components due to non-caloric sweetener characteristics. It does not affect the levels of insulin and does not affect dental health. As it is produced by chlorination of sucrose, thus, the functional groups present in it are a halogen (chlorine) and a hydroxyl.
If a gas is initially at a pressure of nine ATM and a volume at 21 L at a temperature of 253K and the pressure is raise to 15 ATM and the temperature is raised to 302K what will be the resulting volume of the gas
Answers
Answer:
15.0L
Explanation:
p/v = constan
(9*21)/253 =(15v)/ 302
v = (9*21*302)/(15*253)
v=15.0
1. If a question states "The patching material costs NASA $306/in2 …", the conversion factor in this statement is: Recognizing — Equation statement: $306 = _____ ___________
Answers
Answer:
$306 = Cost of 1 square inch of the patching material in question.
$306 = 1 in²
Explanation:
The conversion factor is am expression that is used to prove the equivalence of some quantities with different units.
The conversion factor basically converts from one quantity to another.
For this question, the conversion factor given for the patching material is $306/in².
This means that the patching material costs $306 for every square inch, the equation for the conversion is thus
$306 = 1 in² of the patching material.
Hope this Helps!!!
if your acetic acid buret was still wet inside with deionized water when you filled it with acetic acid?
Answers
Answer:
The water would act as a base and would produce an undesired product of ethanol (CH3OH) through a dissociation reaction. If doing a titration reaction, it will likely yield inaccurate results.
Calculate the standard enthalpy change for the reaction at 25 ∘ C. Standard enthalpy of formation values can be found in this list of thermodynamic properties.HCl(g)+NaOH(s)⟶NaCl(s)+H2O(l)
Answers
Answer:
-179.06 kJ
Explanation:
Let's consider the following balanced reaction.
HCl(g) + NaOH(s) ⟶ NaCl(s) + H₂O(l)
We can calculate the standard enthalpy change for the reaction (ΔH°r) using the following expression.
ΔH°r = 1 mol × ΔH°f(NaCl(s)) + 1 mol × ΔH°f(H₂O(l)) - 1 mol × ΔH°f(HCl(g)) - 1 mol × ΔH°f(NaOH(s))
ΔH°r = 1 mol × (-411.15 kJ/mol) + 1 mol × (-285.83 kJ/mol) - 1 mol × (-92.31 kJ/mol) - 1 mol × (-425.61 kJ/mol)
ΔH°r = -179.06 kJ
Draw the Lewis structure of acetaldehyde (CH₃CHO) and then choose the appropriate pair of molecular geometries of the two central atoms.
a) tetrahedral/trigonal pyramidal.
b) trigonal planar / linear.
c) tetrahedral / trigonal planar.
d) trigonal/tetrahedral.
e) planar /trigonal planar.
Answers
Given that,
Draw the Lewis structure of acetaldehyde (CH₃CHO).
We know that,
The Lewis structure shows the number of electrons around an atom.
According to structure,
We need to find the molecular geometries of the two central atoms
Using molecular geometries
For first central atom,
Number of bond pair = 2
Here, double bond to O count as single bond
The number of lone pair is zero.
The geometry is Trigonal planar.
For second central atom,
Number of bond pair = 4
The number of lone pair is zero.
The geometry is tetrahedral
Hence, The molecular geometries of the two central atoms are trigonal planar and tetrahedral.
(d) is correct option.
The central carbon atoms in acetaldehyde have a tetrahedral geometry and a trigonal planar geometry respectively.
Acetaldehyde has two central carbon atoms. The Lewis structure of acetaldehyde shows the arrangement of electrons around the atoms in the compound. The lone pairs are shown as dots while the bond pairs are represented using a single dash.
The first central carbon atom in acetaldehyde has a tetrahedral geometry while the second central carbon atom in acetaldehyde has a trigonal planar geometry.
Learn more: https://brainly.com/question/7558603
Consider a triangle ABC like the one below. Suppose that C=83°, a = 43, and b = 44. Solve the triangle.
Carry your intermediate computations to at least four decimal places, and round your answers to the nearest tenth.
If there is more than one solution, use the button labeled "or".
Answers
Answer:
Explanation:
In a triangle
a / sin A = b / sinB = c / sinC
Putting the values
43 / sin A = 44 / sinB
sinA / sinB = 43 / 44 = 1 / 1.023
A + B = 180 - 83 = 97
sinA / sin ( 97 - A ) = 1 / 1.023
sin 97 cos A - cos 97 sin A = 1.023 sin A
= .9925 cos A + .122 sin A = 1.023 sin A
.9925 cos A = .901 sin A
squaring
.985 cos²A = .8118 sin²A
.985 - .985 sin²A = .8118 sin²A
.985 = 1.7968 sin²A
sinA = .74
A = 47.73
B = 49.27
c / sin C = b / sin B
c = b sinC / sinB
= 44 x sin 83 / sin 49.27
= 44 x .9925 / .7578
= 57.62
Solid sodium oxide and gaseous water are formed by the decomposition of solid sodium hydroxide (NaOH) .
Write a balanced chemical equation for this reaction.
Answers
Answer:
2NaOH(s) → Na₂O(s) + H₂O(g)
Hope that helps.
Calculate the value of ΔG∘rxnΔGrxn∘ for the following reaction at 296 K. Ka = 2.9 × 10–8 and assume Ka does not change significantly with temperature. $$HClO(aq)+H2O(l) HClO−(aq)+H3O+(aq)
Answers
Answer:
[tex]\Delta G_{rxn}=42.7\frac{kJ}{mol}[/tex]
Explanation:
In this case, for the dissociation of hypochlorous acid, we know that the acid dissociation constant (Ka) is 2.9x10⁻⁸, which is related with the Gibbs free energy as shown below:
[tex]\Delta G_{rxn}=-RTln(K)[/tex]
But in this case K is just Ka, therefore, at 296 K, it turns out:
[tex]\Delta G_{rxn}=-8.314\frac{J}{mol*K}*296K*ln(2.9x10^{-8})\\\\\Delta G_{rxn}=42.7\frac{kJ}{mol}[/tex]
Such result, means that the reaction is nonspontaneous at the given temperature, it means it is not favorable (not easily occurring).
Best regards.
To determine the concentration of chloride ion (Cl-) in a 100 mL sample of ground water, a chemist adds a large enough volume of AgNO3 solution to precipitate all Cl- as AgCl. The mass of the resulting precipitate is 93.9 mg. What is the chloride ion concentration in milligrams of chloride per liter of ground water
Answers
Answer:
[tex][Cl^-]=232.3\frac{mgCl^-}{L}[/tex]
Explanation:
Hello,
In this case, we can represent the chemical reaction as:
[tex]Cl^-(aq)+AgNO_3(aq)\rightarrow AgCl(s)+NO_3^-(aq)[/tex]
In such a way, since the mass of the obtained silver chloride is 93.9 mg, we can compute the chloride ions in the ground water by using the following stoichiometric procedure whereas the molar mass of chloride ions and silver chloride are 35.45 g/mol and 143.32 g/mol respectively:
[tex]m_{Cl^-}=93.3mgAgCl*\frac{1mmolAgCl}{143.32mgAgCl}*\frac{1mmolCl^-}{1mmolAgCl} *\frac{35.45mgCl^-}{1mmolCl^-} =23.23mgCl^-[/tex]
Finally, for the given volume of water in liters (0.100L), we compute the required concentration:
[tex][Cl^-]=\frac{23.2mgCl^-}{0.100L}\\[/tex]
[tex][Cl^-]=232.3\frac{mgCl^-}{L}[/tex]
Best regards.
The concentration of chloride ions in the groundwater sample is 230 mg/L.
Calculation of chloride ion concentration:Based on the given information,
The mass of the resulting precipitate, that is, AgCl is 93.9 mg or 0.0939 g. The molar mass of AgCl is 143.2 g/mol.Now the number of moles of AgCl precipitate can be calculated as,
n = Given mass/Molar mass
Now putting the values we get,
[tex]n = \frac{0.939 g}{143.32 g/mol} \\n = 6.5 * 10^{-4}[/tex]
Thus, 6.5 × 10⁻⁴ moles of AgCl comprises 6.5 × 10⁻⁴ chloride ions. Therefore, 6.5 × 10⁻⁴ of chloride ions are present in the sample of 100 ml.
Now the molar mass of chloride ion is 35.453 g/mol, the mass of chloride ion will be,
Mass = Mole × Molar mass
Mass = 6.5 × 10⁻⁴ moles × 35.453 g/mol
Mass = 0.0230 g or 23 mg
The volume of the groundwater sample is 100 ml or 0.1000 L.
Now the concentration of the chloride ions in the sample given is,
C = 23 mg/0.1000 L
C = 230 mg/L
Thus, the concentration of chloride ions in the groundwater sample is 230 grams per liter.
Find out more information about the calculations of concentrations here:
https://brainly.com/question/6547081
If the sugar concentration in a cell is 3% and the concentration in the cell’s environment is 5%, how can the cell obtain more sugar? {Hint: Sugar is polar and does not pass through the cell membrane easily.}
Select one:
a. Sugar can undergo facilitated diffusion through a channel protein, and no energy is required.
b. The cell must use active transport to pump the sugar in. Energy is required.
c. Sugar can diffuse straight through the phospholipid bilayer.
d. The cell CANNOT obtain more sugar. It is doomed.
Answers
!
The cell can obtain more sugar when the sugar undergo facilitated diffusion through a channel protein, and no energy is required.
FACILITATED DIFFUSION:
Facilitated diffusion is the process whereby molecules move across a cell through the help of carrier/channel proteins. Facilitated diffusion is a type of passive transport and hence, does not require energy to occur. This is because movement occurs down a concentration gradient (high to low). According to this question, the sugar concentration in a cell is 3% and the concentration in the cell’s environment is 5%. This means that the sugar can travel down a concentration gradient across the cell membrane. However, because sugar is a polar molecule and does not pass through the cell membrane easily, a carrier proteins is needed to aid its movement. Therefore, the cell can obtain more sugar when the sugar undergo facilitated diffusion through a channel protein, and no energy is required.Learn more at: https://brainly.com/question/18122054?referrer=searchResults
Suppose you have a container filled with air at 212 oF. The volume of the container 1.00 L, the pressure of air is 1.00 atm. The molecular composition of air is 79% N2 and 21% O2 for simplification. Calculate the mass of air and moles of O2 in the container.
Answers
Answer:
[tex]m_{air}=0.947g[/tex]
[tex]n_{O_2} =0.00686molO_2[/tex]
Explanation:
Hello,
In this case, we can firstly use the ideal gas equation to compute the total moles of the gaseous mixture (air) with the temperature in Kelvins:
[tex]T=212\°F=100\°C=373.15K\\\\n=\frac{PV}{RT}=\frac{1.00atm*1.00L}{0.082\frac{atm*L}{mol*K}*373.15K}\\ \\n=0.0327mol[/tex]
In such a way, since the molar mass of air is 28.97 g/mol, we can compute the mass of air with a single mass-mole relationship:
[tex]m_{air}=0.0327mol*\frac{28.97g}{1mol} =0.947g[/tex]
Finally, knowing that the 21% of the 0.0327 moles of air is oxygen, its moles turn out:
[tex]n_{O_2}=0.0327mol*\frac{0.21molO_2}{1mol} =0.00686molO_2[/tex]
Best regards.
What is/are the major organic product(s) of the following reaction, Question 2 options: A) CH3CH2CCH Br B) CH3CCCH3 Br C) CH2CH2 HCCH Br D) HCCCH2CH2Br E) HCCBr
Answers
Answer:
CH3CH2C≡CH
Explanation:
The particular reaction under study is known as the alkykation of acetylide ions. An acetylide ion can be alkykated using a suitable alkyl halide. The overall scheme of the reaction is;
CH≡C^- + RX -----> RC≡CH + X^-
This reaction is most effective when primary alkyl halides are used. It involves SN2 substitution of a halide in the alkyl halide by an acetylide ion. Secondary, tertiary or even bulky primary substrates are known to yield alkenes and alkynes owing to elimination by E2 mechanism.
A molecule of aluminum fluoride has one aluminum atom. How many fluorine atoms are present?
Answers
Answer:
3 fluorine atoms will be present
Answer:
3
Explanation:
The chemical formula of aluminum fluoride is AlF3. As you can see, there is a 1:3 ratio of aluminum atoms to fluorine atoms. Therefore, if a molecule of AlF3 has one aluminum atom, you know there must be 3 fluorine atoms present.
If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.