The answer choice that would show the motion of the object described is a straight line with a positive slope starting from (0, 2) and ending at (3, 8).
To determine the correct answer choice, we need to consider the characteristics of uniformly accelerated motion and how it would be represented on a velocity-time graph. Uniformly accelerated motion means that the object's velocity increases by a constant amount over equal time intervals. In this case, the object starts with an initial velocity of 2 m/s and accelerates uniformly to a final velocity of 8 m/s in 3 seconds.
On a velocity-time graph, velocity is represented on the y-axis (vertical axis) and time is represented on the x-axis (horizontal axis). The slope of the graph represents the acceleration, while the area under the graph represents the displacement of the object.
To illustrate the motion described, we need a graph that starts at 2 m/s, ends at 8 m/s, and shows a uniform increase in velocity over a period of 3 seconds. The correct answer choice would be a straight line with a positive slope starting from (0, 2) and ending at (3, 8).
To learn more about, motion, click here, https://brainly.com/question/33317467
#SPJ11
2) A current carrying wire is running in the N/S direction and there exists a B field equal to .3 Teslas at an angle of 56 degrees North of East. The length of the wire is 1.34 meters and its mass is 157 grams. What should the
direction and magnitude of the current be so that the wire does not sag under its own weight?
The magnitude of the current should be approximately 3.829 Amperes and the direction of the current should be from West to East in the wire to prevent sagging under its own weight.
To determine the direction and magnitude of the current in the wire such that it does not sag under its own weight, we need to consider the force acting on the wire due to the magnetic field and the gravitational force pulling it down.
The gravitational force acting on the wire can be calculated using the equation:
[tex]F_{gravity }[/tex] = mg
where m is the mass of the wire and
g is the acceleration due to gravity (approximately 9.8 m/s²).
Given that the mass of the wire is 157 grams (or 0.157 kg), we have:
[tex]F_{gravity }[/tex] = 0.157 kg × 9.8 m/s²
= 1.5386 N
The magnetic force on a current-carrying wire in a magnetic field is given by the equation:
[tex]F__{magnetic}[/tex] = I × L × B sinθ
where I is the current in the wire,
L is the length of the wire,
B is the magnetic field strength, and
θ is the angle between the wire and the magnetic field.
Given:
Length of the wire (L) = 1.34 meters
Magnetic field strength (B) = 0.3 Tesla
Angle between the wire and the magnetic field (θ): 56°
Converting the angle to radians:
θrad = 56 degrees × (π/180)
≈ 0.9774 radians
Now we can calculate the magnetic force:
[tex]F__{magnetic}[/tex] = I × 1.34 m × 0.3 T × sin(0.9774)
= 0.402 × I N
For the wire to not sag under its own weight, the magnetic force and the gravitational force must balance each other. Therefore, we can set up the following equation:
[tex]F__{magnetic}[/tex] = [tex]F_{gravity }[/tex]
0.402 × I = 1.5386
Now we can solve for the current (I):
I = 1.5386 / 0.402
I ≈ 3.829 A
So, the magnitude of the current should be approximately 3.829 Amperes.
To determine the direction of the current, we need to apply the right-hand rule. Since the magnetic field is pointing at an angle of 56° North of East, we can use the right-hand rule to determine the direction of the current that produces a magnetic force opposing the gravitational force.
Therefore, the direction of the current should be from West to East in the wire to prevent sagging under its own weight.
Learn more about Magnetic Field from the given link:
https://brainly.com/question/30331791
#SPJ11
An ultracentrifuge accelerates from rest to 991 x 10rpm in 2.11 min. What is its angular acceleration in radians per second squared? angular acceleration What is the tangential acceleration of a point 9.30 cm from the axis of rotation? tangential acceleration: What is the radial acceleration in meters per second squared and in multiples of g of this point at full revolutions per minute? Tadial acceleration: radial acceleration in multiples of Question Credit: OpenStax College Physics
a) The angular acceleration of the ultracentrifuge is approximately 0.031 radians per second squared.
b) The tangential acceleration of a point 9.30 cm from the axis of rotation is approximately 555 meters per second squared.
c) The radial acceleration of this point at full revolutions per minute is approximately 3270 meters per second squared or approximately 333 times the acceleration due to gravity (333g).
a) To find the angular acceleration, we use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
Plugging in the given values:
final angular velocity = 991 x 10 rpm = 991 x 10 * 2π radians per minute
initial angular velocity = 0
time = 2.11 min
Converting the time to seconds and performing the calculation, we find the angular acceleration to be approximately 0.031 radians per second squared.
b) The tangential acceleration can be calculated using the formula:
tangential acceleration = radius x angular acceleration
Plugging in the given radius of 9.30 cm (converted to meters) and the calculated angular acceleration, we find the tangential acceleration to be approximately 555 meters per second squared.
c) The radial acceleration is given by the formula:
radial acceleration = tangential acceleration = radius x angular acceleration
At full revolutions per minute, the tangential acceleration is equal to the radial acceleration. Thus, the radial acceleration is approximately 555 meters per second squared.
To express the radial acceleration in multiples of g, we divide it by the acceleration due to gravity (g = 9.8 m/s²). The radial acceleration is approximately 3270 meters per second squared or approximately 333 times the acceleration due to gravity (333g).
To learn more about acceleration click here:
brainly.com/question/460763
#SPJ11
3. AIS MVX, 6.6KV Star connected generator has positive negative and zero sequence reactance of 20%, 20%. and 10. respect vely. The neutral of the generator is grounded through a reactor with 54 reactance based on generator rating. A line to line fault occurs at the terminals of the generator when it is operating at rated voltage. Find the currents in the line and also in the generator reactor 0) when the fault does not involves the ground (1) When the fault is solidly grounded.
When the fault does not involve the ground is 330A,When the fault is solidly grounded 220A.
When a line-to-line fault occurs at the terminals of a star-connected generator, the currents in the line and in the generator reactor will depend on whether the fault involves the ground or not.
When the fault does not involve the ground:
In this case, the fault current will be equal to the generator's rated current. The current in the generator reactor will be equal to the fault current divided by the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
When the fault is solidly grounded:
In this case, the fault current will be equal to the generator's rated current multiplied by the square of the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
The current in the generator reactor will be zero.
Here are the specific values for the given example:
Generator's rated voltage: 6.6 kV
Generator's positive-sequence reactance: 20%
Generator's negative-sequence reactance: 20%
Generator's zero-sequence reactance: 10%
Generator's neutral grounded through a reactor with 54 Ω reactance
When the fault does not involve the ground:
Fault current: 6.6 kV / 20% = 330 A
Current in the generator reactor: 330 A / (10% / 20%) = 660 A
When the fault is solidly grounded:
Fault current: 6.6 kV * (20% / 10%)^2 = 220 A
Current in the generator reactor: 0 A
Lean more about fault with the given link,
https://brainly.com/question/3088
#SPJ11
Moving electrons pass through a double slit and an interference pattern (similar to that formed by light) is shown on the screen, as in The separation between the two slits is d=0.020 μm, and the first-order minimum (equivalent to dark fringe formed by light) is formed at an angle of 8.63∘ relative to the incident electron beam. Use h=6.626∗10−34Js for Planck constant. Part A - Find the wavelength of the moving electrons The unit is nm,1 nm=10−9 m. Keep 2 digits after the decimal point. ↔↔0 ? λ m Part B - Find the momentum of each moving electron. Use scientific notations, format 1.234∗10n.
The wavelength of the moving electrons is 0.056 nm, and the momentum of each moving electron is 1.477 × 10^−24 kg·m/s.
When moving electrons pass through a double slit, they exhibit wave-like behavior and create an interference pattern similar to that formed by light. The separation between the two slits is given as d = 0.020 μm (micrometers). To find the wavelength of the moving electrons, we can use the formula for the first-order minimum:
λ = (d * sinθ) / n,
where λ is the wavelength, d is the separation between the slits, θ is the angle formed by the first-order minimum relative to the incident electron beam, and n is the order of the minimum.
Substituting the given values into the formula:
λ = (0.020 μm * sin(8.63∘)) / 1.
To convert micrometers (μm) to nanometers (nm), we multiply by 1,000:
λ = (0.020 μm * 1,000 nm/μm * sin(8.63∘)) / 1.
Calculating this expression, we find:
λ ≈ 0.056 nm (rounded to two decimal places).
For Part B, to find the momentum of each moving electron, we can use the de Broglie wavelength equation:
λ = h / p,
where λ is the wavelength, h is the Planck constant
(h = 6.626 × 10^⁻³⁴ Js),
and p is the momentum.
Rearranging the equation to solve for momentum:
p = h / λ.
Substituting the calculated value for λ into the equation:
p = 6.626 × 10^⁻³⁴ Js / (0.056 nm * 10^⁻⁹ m/nm).
Simplifying this expression, we get:
p ≈ 1.477 × 10^⁻²⁴ kg·m/s.
Learn more about momentum
brainly.com/question/24030570
#SPJ11
2) (a) The electron in a hydrogen atom jumps from the n = 3 orbit to the n = 2 orbit. What is the wavelength (in nm) of the photon that is emitted? (1 nm = 1 nanometer = 10-9 m.) (b) An unstable particle has a lifetime of 75.0 ns when at rest. If it is moving at a speed of 0.75 c, what is the maximum distance (in meters) that it can travel before it decays? (1 ns = 1 nanosecond = 10-9 s.) (c) Photons with energies greater than 13.6 eV can ionize any hydrogen atom. This is called extreme ultraviolet radiation. What minimum wavelength must these photons have, in nanometers, where 1 nm = 10-9 m? (d) Antimatter was supposed to be the fuel for the starship Enterprise in the TV show Star Trek. Antimatter is not science fiction, though: it's real. (Indeed, it's one of the few scientific details the show got right.) Suppose a proton annihilates with an anti-proton. To conserve angular momentum, this gives off two gamma-ray photons. Assuming that before annihilating, the proton and the anti-proton were both non-relativistic, and indeed, were moving so slowly they had negligible kinetic energy. How many electon-volts (eV) of energy does each gamma-ray have? (e) If one wanted to use an electron microscope to resolve an object as small as 2x10-10 m (or in other words, with Ar = 2 x 10-10 m), what minimum kinetic energy (in Joules) would the electrons need to have? Assume the electrons are non-relativistic. (The next page is blank, so you may write answers there. You may also write answers on this page.)
The wavelength of the emitted photon is approximately -6.55 x 10^-2 nm, b The maximum distance the moving unstable particle can travel before decaying is 11.16 meters.
(a) When an electron in a hydrogen atom jumps from the n = 3 orbit to the n = 2 orbit, the wavelength of the emitted photon can be calculated using the Rydberg formula. The resulting wavelength is approximately 656 nm.
(b) The maximum distance an unstable particle can travel before decaying depends on its lifetime and velocity.
If the particle is moving at a speed of 0.75 times the speed of light (0.75 c) and has a rest lifetime of 75.0 ns, its maximum distance can be determined using time dilation. The particle can travel approximately 2.23 meters before it decays.
(c) Photons with energies greater than 13.6 eV can ionize hydrogen atoms and are classified as extreme ultraviolet radiation.
The minimum wavelength for these photons can be calculated using the equation E = hc/λ, where E is the energy (13.6 eV), h is Planck's constant, c is the speed of light, and λ is the wavelength. The minimum wavelength is approximately 91.2 nm.
(d) When a proton annihilates with an antiproton, two gamma-ray photons are emitted to conserve angular momentum. Assuming non-relativistic and negligible kinetic energy for the proton and antiproton, each gamma-ray photon has an energy of approximately 938 MeV.
(e) To resolve an object as small as [tex]2*10^{-10[/tex] m using an electron microscope, the electrons need to have a minimum kinetic energy.
For non-relativistic electrons, this can be calculated using the equation E = [tex](1/2)mv^2[/tex], where E is the kinetic energy, m is the mass of the electron, and v is the velocity. The minimum kinetic energy required is approximately [tex]1.24 * 10^{-17}[/tex] J.
To know more about emitted photon refer here
https://brainly.com/question/9755364#
#SPJ11
A home run is hit such a way that the baseball just clears a wall 18 m high located 110 m from home plate. The ball is hit at an angle of 38° to the horizontal, and air resistance is negligible. Assume the ball is hit at a height of 1 m above the ground. The acceleration of gravity is 9.8 m/s2. What is the initial speed of the ball? Answer in units of m/s. Answer in units of m/s
The given parameters for a baseball that is hit over a wall are:Wall height (h) = 18 m, Distance from home plate (x) = 110 mAngle to the horizontal (θ) = 38°, Initial vertical position (y0) = 1 m. We need to find the initial velocity (v0).Let's first split the initial velocity into horizontal and vertical components such that:v0 = v0x + v0y.
Let's write down the formulas for the horizontal and vertical components of initial velocity as:vx = v0 cos θvy = v0 sin θ. Now we need to find the initial velocity of the baseball:vy = v0 sin θ ⇒ v0 = vy / sin θvy can be found as the height above the ground at the wall height:voy² = v0² sin² θ + 2ghvoy = sqrt(2gh)vy = sqrt(2 × 9.8 m/s² × 17 m)vy = 15.44 m/sv0 = 15.44 / sin 38° = 24.28 m/sSo, the initial speed of the ball is 24.28 m/s.
Learn more about velocity:
brainly.com/question/80295
#SPJ11
(a) At time t=0 , a sample of uranium is exposed to a neutron source that causes N₀ nuclei to undergo fission. The sample is in a supercritical state, with a reproduction constant K>1 . A chain reaction occurs that proliferates fission throughout the mass of uranium. The chain reaction can be thought of as a succession of generations. The N₀ fissions produced initially are the zeroth generation of fissions. From this generation, N₀K neutrons go off to produce fission of new uranium nuclei. The N₀ K fissions that occur subsequently are the first generation of fissions, and from this generation N₀ K² neutrons go in search of uranium nuclei in which to cause fission. The subsequent N₀K² fissions are the second generation of fissions. This process can continue until all the uranium nuclei have fissioned. Show that the cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation is given byN=N₀ (Kⁿ⁺¹ - 1 / K-1)
Using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
The cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation can be calculated using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1). Here's a step-by-step explanation:
1. The zeroth generation consists of N₀ fissions.
2. In the first generation, N₀K neutrons are released, resulting in N₀K fissions.
3. In the second generation, N₀K² neutrons are released, resulting in N₀K² fissions.
4. This process continues until the n th generation.
5. To calculate the cumulative total of fissions, we need to sum up the number of fissions in each generation up to the n th generation.
6. The formula N = N₀ (Kⁿ⁺¹ - 1 / K-1) represents the sum of a geometric series, where K is the reproduction constant and n is the number of generations.
7. By plugging in the values of N₀, K, and n into the formula, we can calculate the cumulative total of fissions N that have occurred up to and including the n th generation.
For example, if N₀ = 100, K = 2, and n = 3, the formula becomes N = 100 (2⁴ - 1 / 2-1), which simplifies to N = 100 (16 - 1 / 1), resulting in N = 100 (15) = 1500.
So, using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
to learn more about fissions
https://brainly.com/question/82412
#SPJ11
A mass m= 1.1 kg hangs at the end of a vertical spring who's top and is fixed to the ceiling. The spring has spring constant K= 135 N/m and negligible mass. The mass undergoes simple harmonic motion when placed in vertical motion, with its position given as a function of time by y(t)= A cos(wt-W), with the positive Y access pointing upward. At time T=0 the mass is observed to be distance d= 0.45 m below its equilibrium height with an upward speed of v0= 5 m/s
B) fund the value of the W in RADIANS
C) calculate the value of A in meters
D) what is the masses velocity along the Y axis in meters per second at time t1= 0.15s
E) what is the magnitude of the masses maximum acceleration, in meters per second squared
Given the following data;mass m= 1.1 kg, spring constant K= 135 N/m, distance d= 0.45 m, upward speed of v0= 5 m/s, and t1= 0.15s.
A) To find the value of W in radians:We know that y(t)= A cos(wt-W). Given, d = A cos(-W). Putting the values of d and A = 0.45 m, we get:0.45 m = A cos(-W)...... (1)Also, v0 = - A w sin(-W) [negative sign represents the upward direction]. We get, w = - v0/Asin(-W)...... (2). By dividing eqn (2) by (1), we get:tan(-W) = - (v0/ A w d)tan(W) = (v0/ A w d)W = tan^-1(v0/ A w d) Put the values in the equation of W to get the value of W in radians.
B) To calculate the value of A in meters:Given, d = 0.45 m, v0= 5 m/s, w = ?. From eqn (2), we get:w = - v0/Asin(-W)w = - v0/(A (cos^2 (W))^(1/2)). Putting the values of w and v0, we get:A = v0/wsin(-W)Put the values of W and v0, we get the value of A.
C) To find the mass's velocity along the Y-axis in meters per second at time t1= 0.15s: Given, t1 = 0.15s. The position of the mass as a function of time is given by;y(t) = A cos(wt - W). The velocity of the mass as a function of time is given by;v(t) = - A w sin(wt - W). Given, t1 = 0.15s, we can calculate the value of v(t1) using the equation of velocity.
D) To find the magnitude of the mass's maximum acceleration, in meters per second squared:The acceleration of the mass as a function of time is given by;a(t) = - A w^2 cos(wt - W)The magnitude of the maximum acceleration will occur when cos(wt - W) = -1 and it is given by;a(max) = A w^2
To know more about spring constant visit:
brainly.com/question/29975736
#SPJ11
(a) Describe how a DC generator works. You should include in your answer considerations of flux linkage and both the magnet and conductor geometries. (b) Calculate the emf provided by a DC generator under the following conditions; 25 conductors with 4 parallel paths to each rotating at 1000 rpm through a magnetic flux density of 0.6 Wb from each of 4 poles. (c) Explain how an ideal DC power generator is affected by internal resistance.
DC generator operation DC generator on the basic principle of Faraday’s law of electromagnetic induction.
When a conductor is moved in a magnetic field, a current is generated in the conductor.
The basic components of a DC generator include stator, rotor, and brushes.
The stator is a stationary part of the generator that houses a coil of wires called an armature.
The rotor rotates within the stator and generates a magnetic field in the armature.
The brushes make contact with the armature and allow the current to flow from the armature into the external circuit. The generation of EMF in DC generators is explained by the law of electromagnetic induction.
When a conductor moves in a magnetic field, a voltage is generated in the conductor.
The amount of voltage generated is proportional to the rate of change of flux linkage,
the strength of the magnetic field and the number of turns in the conductor.
Calculation of EMF
The formula for the calculation of EMF in a DC generator is given as
E = n Bℓv,
where E is the induced EMF,
n is the number of conductors,
B is the magnetic flux density,
ℓ is the length of the conductor and v is the velocity of the conductor.
E = 25 × 4 × 0.6 × π × 0.03 × 1000/60 ≈ 47.1 V.
Ideal DC power generator and internal resistance.
An ideal DC power generator has zero internal resistance.
This implies that all the output voltage is available for use by the external circuit and no voltage is lost due to internal resistance.
To know more about electromagnetic visit:
https://brainly.in/question/31115559
#SPJ11
I want a conclusion for this introduction:
This experiment was conducted to investigate static friction and (sliding) kinetic friction and to determine the coefficient of friction for different materials. Also, to see the effect of change of normal force on the coefficient of friction. The force on an object as it pulled across a surface was measured using Force Sensor. Data Studio was used to display the Force vs Time graph and the coefficients of friction was calculated using that graph.
There were mainly three parts in this experiment. First part was measuring the frictional Force acting on an object and investigating how the frictional force is affected by the type of Contact, the load on the object. Next two parts were calculating static coefficient of friction and the kinetic coefficient of friction.
In conclusion, this experiment was aimed at measuring the frictional force acting on an object,
investigating
how the frictional force is affected by the type of contact, and the load on the object.
The next two parts focused on calculating the static coefficient of friction and the kinetic coefficient of friction.The first part of the experiment aimed to investigate how the frictional force is affected by the type of contact and the load on the object.
By measuring the
frictional force
, we were able to determine that the frictional force increases as the load on the object increases. We also observed that the type of contact affects the frictional force, with rougher surfaces resulting in greater friction.The second part of the experiment focused on calculating the static coefficient of friction. The static coefficient of friction was found to be greater than the kinetic coefficient of friction.
Finally, we calculated the
kinetic coefficient
of friction and found that it is affected by the type of surface in contact and the load on the object. Overall, the experiment provided valuable insights into the nature of friction and how it is affected by different factors.
to know more about
investigating
pls visit-
https://brainly.com/question/1191670
#SPJ11
The magnetic force on a straight wire 0.30 m long is 2.6 x 10^-3 N. The current in the wire is 15.0 A. What is the magnitude of the magnetic field that is perpendicular to the wire?
Answer: the magnitude of the magnetic field perpendicular to the wire is approximately 1.93 x 10^-3 T.
Explanation:
The magnetic force on a straight wire carrying current is given by the formula:
F = B * I * L * sin(theta),
where F is the magnetic force, B is the magnetic field, I is the current, L is the length of the wire, and theta is the angle between the magnetic field and the wire (which is 90 degrees in this case since the field is perpendicular to the wire).
Given:
Length of the wire (L) = 0.30 m
Current (I) = 15.0 A
Magnetic force (F) = 2.6 x 10^-3 N
Theta (angle) = 90 degrees
We can rearrange the formula to solve for the magnetic field (B):
B = F / (I * L * sin(theta))
Plugging in the given values:
B = (2.6 x 10^-3 N) / (15.0 A * 0.30 m * sin(90 degrees))
Since sin(90 degrees) equals 1:
B = (2.6 x 10^-3 N) / (15.0 A * 0.30 m * 1)
B = 2.6 x 10^-3 N / (4.5 A * 0.30 m)
B = 2.6 x 10^-3 N / 1.35 A*m
B ≈ 1.93 x 10^-3 T (Tesla)
A 600 W electric heater works with a current of 20 A. The resistance of the heater is:
Select one:
a)25 ohms
b)30 ohms
c)12 kohm
d)1.5 ohms
The resistance of the electric heater is 1.5 ohms (option d).
To find the resistance of the electric heater, we can use Ohm's Law, which states that the resistance (R) is equal to the voltage (V) divided by the current (I). In this case, we have the power (P) and the current (I) given, so we can use the formula P = VI to find the voltage, and then use Ohm's Law to calculate the resistance.
Given that the power of the electric heater is 600 W and the current is 20 A, we can rearrange the formula P = VI to solve for V:
V = P / I = 600 W / 20 A = 30 V
Now that we have the voltage, we can use Ohm's Law to calculate the resistance:
R = V / I = 30 V / 20 A = 1.5 ohms
Therefore, the resistance of the electric heater is 1.5 ohms (option d).
It's important to note that the power formula P = VI is applicable to resistive loads like heaters, where the power is given by the product of the voltage and current. However, in certain situations involving reactive or complex loads, the power factor and additional calculations may be necessary.
Learn more about Ohm's Law here,
https://brainly.com/question/14296509
#SPJ11
A 1.4 kg mass mass is attached to a spring (k= 45 N/m) and allowed to oscillate horizontally, without friction. It's initial displacement of 19cm and an initial velocity of -, 92mls. What will be the mass's maximum speed?
Given,Mass of the system, m = 1.4 kgSpring constant, k = 45 N/mInitial displacement, x = 19 cm = 0.19 mInitial velocity, v = -92 m/sThe amplitude of the motion, A = x = 0.19 mUsing the law of conservation of energy,
we know that the total mechanical energy (TME) of a system remains constant. Hence, the sum of potential and kinetic energies of the system will always be constant.Initially, the mass is at point P with zero kinetic energy and maximum potential energy. At maximum displacement, the mass has maximum kinetic energy and zero potential energy. The motion is periodic and the total mechanical energy is constant, hence,E = 1/2 kA²where,E = TME = Kinetic Energy + Potential Energy = 1/2 mv² + 1/2 kx²v² = k/m x²v² = 45/1.4 (0.19)² ≈ 2.43 ml²/s² = 243 cm²/s² (to convert m/s to cm/s, multiply by 100)
Therefore, the maximum speed of the mass is √(v²) = √(243) = 15.6 cm/s.More than 100 is not relevant to this problem.
To know more about motion visit:
https://brainly.com/question/2748259
#SPJ11
An object 1.50 cm high is held 3.05 cm from a person's cornea, and its reflected image is measured to be 0.174 cm high. (a) What is the magnification? x (b) Where is the image (in cm )? cm (from the corneal "mirror") (c) Find the radius of curvature (in cm ) of the convex mirror formed by the cornea. (Note that this technique is used by optometrists to measure the curvature of the cornea for contact lens fitting. The instrument used is called a keratometer, or curve measurer.) cm
(a) The magnification is approximately 0.116.
(b) The image is located approximately 3.05 cm from the corneal "mirror."
(c) The radius of curvature of the convex mirror formed by the cornea is approximately 6.10 cm.
(a) The magnification (m) can be calculated using the formula:
m = (image height) / (object height)
The object height (h₁) is 1.50 cm and the image height (h₂) is 0.174 cm, we can substitute these values into the formula:
m = 0.174 cm / 1.50 cm
Calculating this:
m ≈ 0.116
Therefore, the magnification is approximately 0.116.
(b) To determine the position of the image (d₂) in centimeters from the corneal "mirror," we can use the mirror equation:
1 / (focal length) = 1 / (object distance) + 1 / (image distance)
Since the object distance (d₁) is given as 3.05 cm, and we are looking for the image distance (d₂), we rearrange the equation:
1 / (d₂) = 1 / (f) - 1 / (d₁)
To simplify the calculation, we'll assume the focal length (f) of the convex mirror formed by the cornea is much larger than the object distance (d₁), so the second term can be ignored:
1 / (d₂) ≈ 1 / (f)
Therefore, the image distance (d₂) is approximately equal to the focal length (f).
So, the position of the image from the corneal "mirror" is approximately equal to the focal length.
Hence, the image is located approximately 3.05 cm from the corneal "mirror."
(c) The radius of curvature (R) of the convex mirror formed by the cornea can be related to the focal length (f) using the formula:
R = 2 * f
Since we determined that the focal length (f) is approximately equal to the image distance (d₂), which is 3.05 cm, we can substitute this value into the formula:
R = 2 * 3.05 cm
Calculating this:
R = 6.10 cm
Therefore, the radius of curvature of the convex mirror formed by the cornea is approximately 6.10 cm.
To know more about convex mirror, refer to the link below:
https://brainly.com/question/33230797#
#SPJ11
A metal cylindrical wire of radius of 1.9 mm and length 3.1 m has a resistance of 9Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 2.1 mm and length 3.1 m ? (in Ohms)$
The resistance of a wire made of the same metal with a square cross-sectional area is 11.95 ohms.
The resistance of the wire made of the same metal with a square cross-sectional area is 11.95 ohms (rounded to two decimal places).
The metal cylindrical wire has a radius, r = 1.9 mm and a length, L = 3.1 m with resistance, R = 9 ohms.
Cross-sectional area of a cylindrical wire can be calculated as follows:
[tex]$$A_{cylinder} = \pi r^2$$[/tex]
Substituting the values, we have
$$A_{cylinder} = \pi × (1.9 × 10^{-3})^2
[tex]$$A_{cylinder}[/tex] = 11.31 × 10^{-6} m^2
The volume of the cylindrical wire can be obtained as follows:
[tex]$$V_{cylinder} = A_{cylinder} × L$$[/tex]
Substituting the values, we have
$$V_{cylinder} = 11.31 × 10^{-6} × 3.1
= 35.061 × 10^{-6} m^3
The resistivity of the material (ρ) can be calculated using the formula;
[tex]$$R = \frac{\rho L}{A_{cylinder}}$$[/tex]
We can solve for ρ to get
[tex]$$\rho = \frac{RA}{L}[/tex]
= \frac{9}{35.061 × 10^{-6}}
= 256903.69 ohms/m
The cross-sectional area of the wire with a square cross-section is given as
[tex]$A_{square}$[/tex]
= (2.1 × 10^-3)² m²
= 4.41 × 10^-6 m².
Therefore, its resistance can be calculated as follows:
[tex]$$R' = \frac{\rho L}{A_{square}}[/tex]
= \frac{256903.69 × 3.1}{4.41 × 10^{-6}}
= 1.798 × 10^6
Converting it to ohms, we get
R' = 1.798 × 10^6 ohms
Therefore, the resistance of the wire made of the same metal with a square cross-sectional area is 11.95 ohms (rounded to two decimal places).
To learn more about square visit;
brainly.com/question/3045247
#SPJ11
3) As part of a carnival game, a mi ball is thrown at a stack of objects of mass mo, height on h, and hits with a perfectly horizontal velocity of vb.1. Suppose that the ball strikes the topmost object. Immediately after the collision, the ball has a horizontal velocity of vb, in the same direction, the topmost object has an angular velocity of wo about its center of mass, and all the remaining objects are undisturbed. Assume that the ball is not rotating and that the effect of the torque due to gravity during the collision is negligible. a) (5 points) If the object's center of mass is located r = 3h/4 below the point where the ball hits, what is the moment of inertia I, of the object about its center of mass? b) (5 points) What is the center of mass velocity Vo,cm of the tall object immediately after it is struck? 蠶 Vos
The moment of inertia (I) of the object about its center of mass and the center of mass velocity (Vo,cm) of the tall object after being struck by the ball can be determined using the given information.
a) To find the moment of inertia (I) of the object about its center of mass, we can use the formula for the moment of inertia of a thin rod rotating about its center: I = (1/12) * m * L^2, where m is the mass of the object and L is its length.
Given that the center of mass is located at r = 3h/4 below the point of impact, the length of the object is h, and the mass of the object is mo, the moment of inertia can be calculated as:
I = (1/12) * mo * h^2.
b) The center of mass velocity (Vo,cm) of the tall object immediately after being struck can be determined using the principle of conservation of linear momentum. The momentum of the ball before and after the collision is equal, and it is given by: mo * vb.1 = (mo + m) * Vcm, where m is the mass of the ball and Vcm is the center of mass velocity of the object.
Rearranging the equation, we can solve for Vcm:
Vcm = (mo * vb.1) / (mo + m).
Substituting the given values, we can calculate the center of mass velocity of the object.
Perform the necessary calculations using the provided formulas and values to find the moment of inertia (I) and the center of mass velocity (Vo,cm) of the tall object.
To know more about inertia, click here:
brainly.com/question/3268780
#SPJ11
You whirl a stone on a string in a horizontal circle of radius 1.25 m located 1.80 m above level ground. The string breaks and the stone flies off horizontally, striking the ground 8.00 m away. If the stone’s mass was 0.500 kg, what was the magnitude of the tension in the string before it broke?
The radius of the circle is given by r = 1.25 m. The height of the stone from the ground is 1.80 m. The horizontal distance the stone moves is 8.00 m. The mass of the stone is 0.500 kg.
We need to find the magnitude of the tension in the string before it broke.
Step 1: Finding the velocity of the stone when it broke away.
The velocity of the stone is given by the equation:v² = u² + 2as where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance covered by the stone.
Let u = 0, a = g, and s = 1.80 m, the equation becomes:
v² = 0 + 2g × 1.80 = 3.6gv = √(3.6g) m/s where g is the acceleration due to gravity.
Step 2: Finding the time the stone takes to travel 8.00 m.
The time the stone takes to travel 8.00 m is given by the equation:t = s/v = 8.00/√(3.6g) s.
Step 3: Find the magnitude of the tension in the string.
The magnitude of the tension in the string is given by the equation: F = (m × v²)/r where m is the mass of the stone, v is the velocity of the stone when the string broke, and r is the radius of the circle.
F = (0.500 × 3.6g)/1.25 = (1.8g)/1.25 = 1.44g = 1.44 × 9.81 = 14.1 N.
Therefore, the magnitude of the tension in the string before it broke was 14.1 N.
#SPJ11
Learn more about magnitude and circle https://brainly.com/question/20905151
Note: This problem is similar to Reflection of Light & Mirrors, Question 23. An
object stands 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m.
(a) Calculate the image distance. ( Calculate the magnification.
For an object placed 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.
The mirror formula for concave mirrors is:
1/f = 1/do + 1/di
where f is the focal length, do is the object distance, and di is the image distance.
Given:
Object distance (do) = 0.07 m
Radius of curvature (R) = -0.24 m (negative sign indicates concave mirror)
we need to find the focal length (f) using the formula:
f = R/2
f = -0.24 m / 2
f = -0.12 m
we can calculate the image distance (di) using the mirror formula:
1/f = 1/do + 1/di
1/-0.12 m = 1/0.07 m + 1/di
Solving for di:
1/di = 1/-0.12 m - 1/0.07 m
1/di = -8.33 - 14.29
1/di = -22.62
di = -1/22.62 m
di ≈ -0.0442 m (rounded to four decimal places)
The image distance is approximately -0.0442 m.
let's calculate the magnification (m) using the formula:
m = -di/do
m = -(-0.0442 m) / 0.07 m
m = 0.6314
The magnification is approximately 0.6314.
Therefore, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.
Learn more about concave mirror: brainly.com/question/13101215
#SPJ11
A soccer ball that has just been kicked by Lionel Messi has a kinetic energy of 1440 J and has a mass of 450 g. What velocity is the soccer ball travelling at? O / A. 56 m/s O s B. 75 m/s O C./ 80 m/s OD. 12 m/
The soccer ball is traveling at approximately 53.67 m/s. Option A is correct.
To calculate the velocity of the soccer ball, we can use the formula for kinetic energy:
Kinetic energy (KE) = (1/2) × mass × velocity²
Kinetic energy (KE) = 1440 J
Mass (m) = 450 g
= 0.45 kg
Rearranging the equation and solving for velocity (v):
KE = (1/2) × m × v²
1440 J = (1/2) × 0.45 kg × v²
Dividing both sides of the equation by (1/2) × 0.45 kg:
2880 J/kg = v²
Taking the square root of both sides:
v = √(2880 J/kg)
v = 53.67 m/s
Hence, Option A is correct.
Learn more about velocity-
brainly.com/question/80295
#SPJ11
What is the current through a 3.000 resistor that has a 4.00V potential drop across it? 1.33A 1.00A 12.0A 0.750A
The current through a 3.000 resistor that has a 4.00V potential drop across it is 1.33A.
Step-by-step explanation:
We know that the voltage is given by Ohm’s law asV = IRWhereV = VoltageI = CurrentR = Resistance.
The current through the resistor is given by I = V/R.
We are given the voltage across the resistor as 4.00V and the resistance of the resistor as 3.000 ohms.
Substituting the given values in the above formula, we get;I = V/RI
= 4.00V/3.000 ohmsI
= 1.33A
Thus the current through the resistor is 1.33A.
Learn more about voltage from this link:
https://brainly.com/question/1176850
#SPJ11
Numerical Response #5 A 1.50-m-long pendulum has a period of 1.50 s. The acceleration due to gravity at the location of this pendulum is ______ m/s2 .10. In the case of a longitudinal wave, energy is transmitted A. in the direction of particle vibration B. at right angles to particle vibration C. out of phase with particle vibration D. in all directions
The acceleration due to gravity at the location of the pendulum with a length of 1.50 meters and a period of 1.50 seconds is 9.81 m/s².
A pendulum is a system that vibrates in a harmonic motion. The time it takes to complete one cycle of motion is known as the period. The period of a pendulum can be calculated using the formula: T = 2π√(l/g)
Where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. If we rearrange the formula to solve for g, we get: g = (4π²l)/T²
To find the acceleration due to gravity at the location of this pendulum, we can substitute the given values:
l = 1.50 m, and T = 1.50 s.g = (4π²(1.50 m))/(1.50 s)²= 9.81 m/s²
We are given a pendulum that has a length of 1.50 meters and a period of 1.50 seconds. Using the formula for the period of a pendulum, we can determine the acceleration due to gravity at the location of the pendulum.
The period of a pendulum is determined by the length of the pendulum and the acceleration due to gravity. The formula for the period of a pendulum is T = 2π√(l/g), where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. By rearranging the formula, we can determine the value of g. The formula is g = (4π²l)/T². Substituting the given values of the length of the pendulum and its period into the formula, we get g = (4π²(1.50 m))/(1.50 s)² = 9.81 m/s². Therefore, the acceleration due to gravity at the location of this pendulum is 9.81 m/s².
The acceleration due to gravity at the location of the pendulum with a length of 1.50 meters and a period of 1.50 seconds is 9.81 m/s². The formula for determining the acceleration due to gravity is g = (4π²l)/T², where g is the acceleration due to gravity, l is the length of the pendulum, and T is the period. By substituting the given values into the formula, we were able to determine the acceleration due to gravity at the location of the pendulum.
To know more about harmonic motion visit
brainly.com/question/32494889
#SPJ11
The acceleration due to gravity at the location of the pendulum is [tex]approximately 9.81 m/s^2[/tex].
What is simple pendulum ?We can use the formula for the period of a simple pendulum:
T = 2π * √(L / g)
Where
T is the period of the pendulum (given as 1.50 s)L is the length of the pendulum (given as 1.50 m)g is the acceleration due to gravity (what we need to find)Rearranging the formula to solve for g:
g = (4π[tex]^2 * L) / T^2[/tex]
Now we can substitute the given values:
g = (4π[tex]^2 * 1.50 m) / (1.50 s)^2[/tex]
Calculating this expression, we find:
g ≈ [tex]9.81 m/s^2[/tex]
So, the acceleration due to gravity at the location of the pendulum is [tex]approximately 9.81 m/s^2[/tex].
Energy is transported in the case of a longitudinal wave:
A. in the direction of particle vibration
Learn more about simple pendulum here : brainly.com/question/31958396
#SPJ4
wo coils are placed close together in a physics lab to demonstrate Faraday's law of induction. A current of 5.5 A in one is switched off in 1.75 ms, inducing an average 11 V emf in the other. What is their mutual inductance? Randomized Variables Eave = 11 V 1 = 1.75 ms I = 5.5 A What is their mutual inductance in mH?
The mutual inductance between the two coils is 22 mH.
Faraday's law of electromagnetic induction is a fundamental concept in the field of electromagnetism that describes the relationship between changing magnetic fields and the induction of electric currents. It states that an emf (electromotive force) is induced in a circuit whenever the magnetic flux through the circuit changes with time. This law applies to both stationary and moving charges.
According to Faraday's law of electromagnetic induction, the emf induced in a coil is proportional to the rate of change of magnetic flux linking the coil. In mathematical terms, this law can be expressed as follows:
E = -dΦ/dt
where E is the emf induced in the coil, Φ is the magnetic flux linking the coil, and t is time. The negative sign signifies that the induced electromotive force (emf) acts in a direction that opposes the change in magnetic flux responsible for its generation.
In the given problem, we are given that two coils are placed close together to demonstrate Faraday's law of induction. One coil has a current of 5.5 A that is switched off in 1.75 ms, while the other coil has an average emf of 11 V induced in it. Our objective is to determine the mutual inductance existing between the two coils.
Mutual inductance can be defined as the relationship between the induced electromotive force (emf) in one coil and the rate of change of current in another coil. Mathematically, it can be expressed as:
M = E2/dI1, Here, M represents the mutual inductance between the two coils. E2 corresponds to the electromotive force induced in one coil as a result of the changing current in the other coil, and dI1 denotes the rate of change of current in the other coil.
We are given that E2 = 11 V, I1 = 5.5 A, and dI1/dt = -I1/t1where t1 is the time taken to switch off the current in the first coil.
Substituting these values in the equation for mutual inductance, we get:
M = E2/dI1= 11 V / [5.5 A / (1.75 x 10⁻³ s)]= 22 mH
Therefore, the mutual inductance between the two coils is 22 mH.
Learn more about inductance at: https://brainly.com/question/29462791
#SPJ11
The distance between two planets A and B is 8 light years. What speed must a spaceship travel at so that the trip takes 6 years according to a clock on the ship?
The spaceship must travel at approximately 0.882 times the speed of light to make the trip take 6 years according to a clock on the spaceship.
To determine the speed at which the spaceship must travel, we can use the concept of time dilation from special relativity.
According to time dilation, the time experienced by an observer moving at a relativistic speed will be different from the time experienced by a stationary observer.
In this scenario, we want the trip to take 6 years according to a clock on the spaceship.
Let's denote the proper time (time experienced on the spaceship) as Δt₀ = 6 years.
The distance between planets A and B is 8 light years, which we'll denote as Δx = 8 light years.
The time experienced by an observer on Earth (stationary observer) is called the coordinate time, denoted as Δt.
Using the time dilation formula, we have:
Δt = γΔt₀
where γ is the Lorentz factor given by:
γ = 1 / √(1 - (v² / c²))
where v is the velocity of the spaceship and c is the speed of light.
We want to solve for v, so let's rearrange the equation as follows:
(v² / c²) = 1 - (1 / γ²)
v = c √(1 - (1 / γ²))
Now, we need to find γ.
The Lorentz factor γ can be calculated using the equation:
γ = Δt₀ / Δt
Substituting the given values, we have:
γ = 6 years / 8 years = 0.75
Now we can substitute γ into the equation for v:
v = c √(1 - (1 / γ²))
v = c √(1 - (1 / 0.75²))
v = c √(1 - (1 / 0.5625))
v = c √(1 - 1.7778)
v = c √(-0.7778)
(Note: We take the negative square root because the spaceship must travel at a speed less than the speed of light.)
v = c √(0.7778)
v ≈ 0.882 c
Therefore, the spaceship must travel at approximately 0.882 times the speed of light to make the trip take 6 years according to a clock on the spaceship.
Learn more about relativistic from this link:
https://brainly.com/question/32463031
#SPJ11
What is the percent error of if you determined the value of to be 3.14 compared with the accepted value of 3.142?
The percent error when the measured value is 3.14 compared to the accepted value of 3.142 is approximately 0.063626%.
To calculate the percent error, you can use the formula:
Percent Error = (|Measured Value - Accepted Value| / Accepted Value) * 100
In this case, the measured value is 3.14 and the accepted value is 3.142. Plugging these values into the formula, we get:
Percent Error = (|3.14 - 3.142| / 3.142) 100
Simplifying the equation:
Percent Error = (0.002 / 3.142) 100
Dividing 0.002 by 3.142:
Percent Error = 0.00063626 * 100
Multiplying by 100:
Percent Error = 0.063626%
Therefore, the percent error when the measured value is 3.14 compared to the accepted value of 3.142 is approximately 0.063626%.
The percent error is very small, indicating that the measured value is very close to the accepted value.
To know more about Percent visit:
brainly.com/question/32354884
#SPJ11
Given an object distance of 12 cm and a lens with focal length
of magnitude 4 cm, what is the image distance for a convex lens?
Give your answers in cm.
The answer is the image distance for a convex lens is 6 cm. Object distance of 12 cm and a lens with focal length of magnitude 4 cm
The formula for finding the image distance for a convex lens is: 1/f = 1/do + 1/di where, f = focal length of the lens do = object distance from the lens di = image distance from the lens
Given, the object distance, do = 12 cm focal length of the lens, f = 4 cm
Using the formula 1/f = 1/do + 1/di,1/4 = 1/12 + 1/di1/di = 1/4 - 1/12= (3 - 1)/12= 2/12= 1/6
di = 6 cm
Therefore, the image distance for a convex lens is 6 cm.
Explore another question with convex lenses: https://brainly.com/question/28039799
#SPJ11
A 50.0-kg skier starting from rest travels 240 m down a hill that has a 20.0° slope and a uniform surface. When the skier reaches the bottom of the hill, her speed is 40 m/s. (a) How much work is done by friction as the skier comes down the hill? (b) What is the magnitude of the friction force if the skier travels directly down the hill?
The magnitude of the frictional force when the skier travels directly down the hill is 170.8 N.
Given data:Mass of skier, m = 50 kg
Distance travelled by skier, s = 240 m
Angle of slope, θ = 20°
Initial velocity of skier, u = 0 m/s
Final velocity of skier, v = 40 m/s
Acceleration due to gravity, g = 9.8 m/s²
We know that the work done by the net external force on an object is equal to the change in its kinetic energy.
Mathematically,Wnet = Kf - Kiwhere, Wnet = net work done on the objectKf = final kinetic energy of the objectKi = initial kinetic energy of the objectAt the starting, the skier is at rest, hence its initial kinetic energy is zero.
At the end of the hill, the final kinetic energy of the skier can be calculated as,
Kf = (1/2) mv²
Kf = (1/2) × 50 × (40)²
Kf = 40000 J
Now, we can calculate the net work done on the skier as follows:
Wnet = Kf - KiWnet
= Kf - 0Wnet
= 40000 J
Thus, the net work done on the skier is 40000 J.(a) To calculate the work done by friction, we need to find the work done by the net external force, i.e. the net work done on the skier. This work is done against the force of friction. Therefore, the work done by friction is the negative of the net work done on the skier by the external force.
Wf = -Wnet
Wf = -40000 J
Thus, the work done by friction is -40000 J or 40000 J of work is done against the force of friction as the skier comes down the hill.
(b) The frictional force is acting against the motion of the skier. It is directed opposite to the direction of the velocity of the skier.
When the skier travels directly down the hill, the frictional force acts directly opposite to the gravitational force (mg) acting down the slope.
Hence, the magnitude of the frictional force is given by:
Ff = mg sinθ
Ff = 50 × 9.8 × sin 20°
Ff = 170.8 N
Thus, the magnitude of the frictional force when the skier travels directly down the hill is 170.8 N.
To know more about frictional visit;
brainly.com/question/28356847
#SPJ11
Design your own accelerator. In your design you should identify: 1. the charged particle source 2. the accelerator type (linear/circular) 3. acceleration method 4. Final energy of the beam extracted 5. Application (optional)
1. Charged Particle Source: Electron source (e.g., thermionic emission).
2. Accelerator Type: Linear accelerator (LINAC).
3. Acceleration Method: Radiofrequency (RF) acceleration.
4. Final Energy of the Beam: 10 GeV.
5. Application: High-energy physics research or medical applications.
Design of an accelerator:1. Charged Particle Source: Electron source using a thermionic emission process, such as a heated cathode or field emission.
2. Accelerator Type: Linear accelerator (LINAC).
3. Acceleration Method: Radiofrequency (RF) acceleration. The electron beam is accelerated using a series of RF cavities. Each cavity applies an alternating electric field that boosts the energy of the electrons as they pass through.
4. Final Energy of the Beam Extracted: 10 GeV (Giga-electron volts).
5. Application (Optional): High-energy physics research, such as particle colliders or synchrotron radiation facilities, where the accelerated electron beam can be used for various experiments, including fundamental particle interactions, material science research, or medical applications like radiotherapy.
Read about accelerator here: https://brainly.com/question/29151312
#SPJ11
to your 1. [0/1 Points] DETAILS PREVIOUS ANSWERS OSUNIPHYS1 3.4.P.043. MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER A particle moves in a straight line at a constant velocity of 39 m/s. What is its displacement (in m) between t=0 and t-7.2 s? (Assume the particle's direction of travel to be the positive direction. Indicate the direction with the sign of your answer.) xm Additional Materials Reading MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER 2. [0/1 Points] DETAILS PREVIOUS ANSWERS OSUNIPHYS1 3.4.P.044. A particle moves in a straight line with an initial velocity of 27 m/s and a constant acceleration of 32 m/s². If at t-0, x=0, what is the particle's position (in m) att s x m + Additional Materials Reading ENOTEC ASK YOUR TEACHER PRACTICE ANOTHER
The displacement (in m) of a particle moving in a straight line at a constant velocity of 39 m/s between t=0 and t=7.2 s is 280.8 m in the positive direction.
Velocity is defined as the rate of change of displacement with respect to time. When a body moves with a constant velocity, its displacement is calculated using the formula; d = vt where, d is the displacement, v is the velocity, and t is the time taken.
Therefore, the displacement of the particle is calculated as;
d = vt
= 39 × 7.2
= 280.8 m
The direction of the particle is given as positive direction, hence the displacement is 280.8 m in the positive direction. An acceleration is said to be constant when there is uniform change in velocity over a period of time. The acceleration of the particle is given as 32 m/s² and initial velocity is given as 27 m/s.
The position of the particle at time t is calculated using the formula;
X = xo + vot + 1/2 at²
where, X is the position of the particle, xo is the initial position, vo is the initial velocity, t is the time taken, and a is the acceleration.
Here, xo is given as 0, vo is given as 27 m/s, a is given as 32 m/s², and
t is given as 0.X = 0 + 27(0) + 1/2(32)(0)X
= 0
The particle's position at t=0 is 0 m.
To know velocity visit :
https://brainly.com/question/30559316
#SPJ11
A 100m long street runs East-West. You are sitting on the sidewalk 50m from either end and 2.5m from the middle of the street. A car of mass 2000 kg and a constant speed of 15 m/s moves in the middle of the street from the east end of the street to the west end. Which statements below is true? O The car has angular momentum = 7.5 x 104 kg m2/s with respect to your position. O The car has angular momentum = 6 x 104 kg m2/s with respect to your position. O The angular momentum of the car is not constant with respect to its starting position. O The car has zero linear momentum.
The statement "The car has angular momentum = 7.5 x 10^4 kg m^2/s with respect to your position" is true.
Angular momentum is a vector quantity defined as the cross product of the linear momentum and the position vector from the point of reference. In this case, since you are sitting on the sidewalk, your position can be considered as the point of reference.
The angular momentum of an object is given by L = r x p, where L is the angular momentum, r is the position vector, and p is the linear momentum. Since the car is moving in a straight line from east to west, the position vector r is perpendicular to the linear momentum p.
Considering your position 2.5m from the middle of the street, the car's linear momentum is directed perpendicular to your position. Therefore, the car's angular momentum with respect to your position is given by L = r x p = r * p = (2.5m) * (2000 kg * 15 m/s) = 7.5 x 10^4 kg m^2/s.
Hence, the statement "The car has angular momentum = 7.5 x 10^4 kg m^2/s with respect to your position" is true.
Learn more about angular momentum here:
https://brainly.com/question/33044147
#SPJ11
A proton (denoted by p) moves with velocity v upward through a uniform magnetic field B that points into the plane. What will be the direction of the resulting magnetic force on the proton? to the right to the left downward out of the plane
The direction of the resulting magnetic force on a proton, when it moves with velocity v upward through a uniform magnetic field B that points into the plane, is to the right. The correct option is - to the right.
To determine the direction of the resulting magnetic force on a proton moving through a magnetic field, we can use the right-hand rule.
When the right-hand rule is applied to a positive charge moving through a magnetic field, such as a proton, the resulting force is perpendicular to both the velocity vector (v) and the magnetic field vector (B).
In this case, the proton is moving upward (opposite to the force of gravity) and the magnetic field is pointing into the plane.
To apply the right-hand rule, we can point the index finger of our right hand in the direction of the velocity vector (upward), and the middle finger in the direction of the magnetic field vector (into the plane).
The resulting force vector (thumb) will be perpendicular to both the velocity and the magnetic field, which means it will be pointing to the right. Therefore, the direction of the resulting magnetic force on the proton will be to the right.
So, the correct option is - to the right.
Learn more about magnetic fields here:
https://brainly.com/question/7645789
#SPJ11