When government spending increases by $5 billion and the MPC = .8, in the first round of the spending multiplier process, spending increases by $20 billion.
The spending multiplier is the amount by which GDP will increase for each unit increase in government spending. It is calculated as 1/(1-MPC), where MPC is the marginal propensity to consume. In this case, MPC = .8, so the spending multiplier is 1/(1-.8) = 5.
Therefore, when government spending increases by $5 billion, the total increase in spending in the economy will be $5 billion multiplied by the spending multiplier of 5, which equals $25 billion. However, the initial increase in spending is only $5 billion, hence the increase in the first round of the spending multiplier process is $20 billion.
In summary, when government spending increases by $5 billion and the MPC = .8, the initial increase in spending is $5 billion, but the total increase in the first round of the spending multiplier process is $20 billion.
To know more about marginal propensity to consume visit:
https://brainly.com/question/31517852
#SPJ11
a ball that is dropped from a window hits the ground in 7 seconds. how high is the window? (give your answer in feet; note that the acceleration due to gravity is 32 ft/s.)
The ball was dropped from a window that is 784 feet high. To determine the height of the window from which the ball was dropped, we can use the formula for free fall: h = 0.5 * g * t²
The formula for free fall is : h = 0.5 * g * t² ,
where h is the height, g is the acceleration due to gravity (32 ft/s²), and t is the time it takes to hit the ground (7 seconds).
Given below the steps to calculate how high the window is :
So, the ball was dropped from a window that is 784 feet high.
To learn more about dropped : https://brainly.com/question/24746268
#SPJ11
the value of the sum of squares due to regression, ssr, can never be larger than the value of the sum of squares total, sst. True or false?
True. The sum of squares due to regression (ssr) represents the amount of variation in the dependent variable that is explained by the independent variable(s) in a regression model. On the other hand, the sum of squares total (sst) represents the total variation in the dependent variable.
In fact, the coefficient of determination (R-squared) in a regression model is defined as the ratio of ssr to sst. It represents the proportion of the total variation in the dependent variable that is explained by the independent variable(s) in the model. Therefore, R-squared values range from 0 to 1, where 0 indicates that the model explains none of the variations and 1 indicates that the model explains all of the variations.
Understanding the relationship between SSR and sst is important in evaluating the performance of a regression model and determining how well it fits the data. If SSR is small relative to sst, it may indicate that the model is not a good fit for the data and that there are other variables or factors that should be included in the model. On the other hand, if ssr is large relative to sst, it suggests that the model is a good fit and that the independent variable(s) have a strong influence on the dependent variable.
Learn more about regression model here:
https://brainly.com/question/14983410
#SPJ11
Let N = 9 In The T Statistic Defined In Equation 5.5-2. (A) Find T0.025 So That P(T0.025 T T0.025) = 0.95. (B) Solve The Inequality [T0.025 T T0.025] So That Is In The Middle.Let n = 9 in the T statistic defined in Equation 5.5-2.
(a) Find t0.025 so that P(−t0.025 ≤ T ≤ t0.025) = 0.95.
(b) Solve the inequality [−t0.025 ≤ T ≤ t0.025] so that μ is in the middle.
For N=9 (8 degrees of freedom), t0.025 = 2.306. The inequality is -2.306 ≤ T ≤ 2.306, with μ in the middle.
Step 1: Identify the degrees of freedom (df). Since N=9, df = N - 1 = 8.
Step 2: Find the critical t-value (t0.025) for 95% confidence interval. Using a t-table or calculator, we find that t0.025 = 2.306 for df=8.
Step 3: Solve the inequality. Given P(-t0.025 ≤ T ≤ t0.025) = 0.95, we can rewrite it as -2.306 ≤ T ≤ 2.306.
Step 4: Place μ in the middle of the inequality. This represents the middle 95% of the T distribution, where the population mean (μ) lies with 95% confidence.
To know more about population mean click on below link:
https://brainly.com/question/30727743#
#SPJ11
1. Which circle does the point (-1,1) lie on?
O (X2)2 + (y+6)2 - 25
0 (x-5)2 + (y+2)2 = 25
0 (x2)2 + (y-2)2 = 25
0 (x-2)2 + (y-5)2 = 25
The given options can be represented in the following general form:
Circle with center (h, k) and radius r is expressed in the form
(x - h)^2 + (y - k)^2 = r^2.
Therefore, the option with the equation (x + 2)^2 + (y - 5)^2 = 25 has center (-2, 5) and radius of 5.
Let us plug in the point (-1, 1) in the equation:
(-1 + 2)^2 + (1 - 5)^2 = 25(1)^2 + (-4)^2 = 25.
Thus, the point (-1, 1) does not lie on the circle
(x + 2)^2 + (y - 5)^2 = 25.
In conclusion, the point (-1, 1) does not lie on the circle
(x + 2)^2 + (y - 5)^2 = 25.
To know more about Circle visit:
https://brainly.com/question/12930236
#SPJ11
test the series for convergence or divergence. [infinity] n2 8 6n n = 1
The series converges by the ratio test
How to find if series convergence or not?We can use the limit comparison test to determine the convergence or divergence of the series:
Using the comparison series [tex]1/n^2[/tex], we have:
[tex]lim [n\rightarrow \infty] (n^2/(8 + 6n)) * (1/n^2)\\= lim [n\rightarrow \infty] 1/(8/n^2 + 6) \\= 0[/tex]
Since the limit is finite and nonzero, the series converges by the limit comparison test.
Alternatively, we can use the ratio test to determine the convergence or divergence of the series:
Taking the ratio of successive terms, we have:
[tex]|(n+1)^2/(8+6(n+1))| / |n^2/(8+6n)|\\= |(n+1)^2/(8n+14)| * |(8+6n)/n^2|[/tex]
Taking the limit as n approaches infinity, we have:
[tex]lim [n\rightarrow \infty] |(n+1)^2/(8n+14)| * |(8+6n)/n^2|\\= lim [n\rightarrow \infty] ((n+1)/n)^2 * (8+6n)/(8n+14)\\= 1/4[/tex]
Since the limit is less than 1, the series converges by the ratio test.
Learn more about series convergence or divergence
brainly.com/question/15415793
#SPJ11
(6 points) let s = {1,2,3,4,5} (a) list all the 3-permutations of s. (b) list all the 5-permutations of s.
(a) The 3-permutations of s are:
{1,2,3}
{1,2,4}
{1,2,5}
{1,3,2}
{1,3,4}
{1,3,5}
{1,4,2}
{1,4,3}
{1,4,5}
{1,5,2}
{1,5,3}
{1,5,4}
{2,1,3}
{2,1,4}
{2,1,5}
{2,3,1}
{2,3,4}
{2,3,5}
{2,4,1}
{2,4,3}
{2,4,5}
{2,5,1}
{2,5,3}
{2,5,4}
{3,1,2}
{3,1,4}
{3,1,5}
{3,2,1}
{3,2,4}
{3,2,5}
{3,4,1}
{3,4,2}
{3,4,5}
{3,5,1}
{3,5,2}
{3,5,4}
{4,1,2}
{4,1,3}
{4,1,5}
{4,2,1}
{4,2,3}
{4,2,5}
{4,3,1}
{4,3,2}
{4,3,5}
{4,5,1}
{4,5,2}
{4,5,3}
{5,1,2}
{5,1,3}
{5,1,4}
{5,2,1}
{5,2,3}
{5,2,4}
{5,3,1}
{5,3,2}
{5,3,4}
{5,4,1}
{5,4,2}
{5,4,3}
(b) The 5-permutations of s are:
{1,2,3,4,5}
{1,2,3,5,4}
{1,2,4,3,5}
{1,2,4,5,3}
{1,2,5,3,4}
{1,2,5,4,3}
{1,3,2,4,5}
{1,3,2,5,4}
{1,3,4,2,5}
{1,3,4,5,2}
{1,3,5,2,4}
{1,3,5,4,2}
{1,4,2,3,5}
{1,4,2,5,3}
{1,4,3,2,5}
{1,4,3,5
To know more about permutations refer here:
https://brainly.com/question/30649574
#SPJ11
Let a belong to a ring R. let S= (x belong R such that ax = 0) show that s is a subring of R
S satisfies all the conditions of being a subring of R, and we can conclude that S is indeed a subring of R.
To show that S is a subring of R, we need to verify the following three conditions:
1. S is closed under addition: Let x, y belong to S. Then, we have ax = 0 and ay = 0. Adding these equations, we get a(x + y) = ax + ay = 0 + 0 = 0. Thus, x + y belongs to S.
2. S is closed under multiplication: Let x, y belong to S. Then, we have ax = 0 and ay = 0. Multiplying these equations, we get a(xy) = (ax)(ay) = 0. Thus, xy belongs to S.
3. S contains the additive identity and additive inverses: Since R is a ring, it has an additive identity element 0. Since a0 = 0, we have 0 belongs to S. Also, if x belongs to S, then ax = 0, so -ax = 0, and (-1)x = -(ax) = 0. Thus, -x belongs to S.
Therefore, S satisfies all the conditions of being a subring of R, and we can conclude that S is indeed a subring of R.
To know more about subrings refer here :
https://brainly.com/question/14099149#
#SPJ11
If you made 35. 6g H2O from using unlimited O2 and 4. 3g of H2, what’s your percent yield?
and
If you made 23. 64g H2O from using 24. 0g O2 and 6. 14g of H2, what’s your percent yield?
The percent yield of H2O is 31.01%.
Given: Amount of H2O obtained = 35.6 g
Amount of H2 given = 4.3 g
Amount of O2 given = unlimited
We need to find the percent yield.
Now, let's calculate the theoretical yield of H2O:
From the balanced chemical equation:
2H2 + O2 → 2H2O
We can see that 2 moles of H2 are required to react with 1 mole of O2 to form 2 moles of H2O.
Molar mass of H2 = 2 g/mol
Molar mass of O2 = 32 g/mol
Molar mass of H2O = 18 g/mol
Therefore, 2 moles of H2O will be formed by using:
2 x (2 g + 32 g) = 68 g of the reactants
So, the theoretical yield of H2O is 68 g.
From the question, we have obtained 35.6 g of H2O.
Therefore, the percent yield of H2O is:
Percent yield = (Actual yield/Theoretical yield) x 100
= (35.6/68) x 100= 52.35%
Therefore, the percent yield of H2O is 52.35%.
Given: Amount of H2O obtained = 23.64 g
Amount of H2 given = 6.14 g
Amount of O2 given = 24.0 g
We need to find the percent yield.
Now, let's calculate the theoretical yield of H2O:From the balanced chemical equation:
2H2 + O2 → 2H2O
We can see that 2 moles of H2 are required to react with 1 mole of O2 to form 2 moles of H2O.
Molar mass of H2 = 2 g/mol
Molar mass of O2 = 32 g/mol
Molar mass of H2O = 18 g/mol
Therefore, 2 moles of H2O will be formed by using:
2 x (6.14 g + 32 g) = 76.28 g of the reactants
So, the theoretical yield of H2O is 76.28 g.
From the question, we have obtained 23.64 g of H2O.
Therefore, the percent yield of H2O is:
Percent yield = (Actual yield/Theoretical yield) x 100
= (23.64/76.28) x 100= 31.01%
Therefore, the percent yield of H2O is 31.01%.
To know more about percent yield visit:
https://brainly.com/question/17042787
#SPJ11
The scores earned on the mathematics portion of the SAT, a college entrance exam, are approximately normally distributed with mean 516 and standard deviation 1 16. What scores separate the middle 90% of test takers from the bottom and top 5%? In other words, find the 5th and 95th percentiles.
The scores earned on the mathematics portion of the SAT, a college entrance exam, are approximately normally distributed with mean 516 and standard deviation 1 16. The scores that separate the middle 90% of test takers from the bottom and top 5% are 333.22 and 698.78, respectively.
Using the mean of 516 and standard deviation of 116, we can standardize the scores using the formula z = (x - μ) / σ, where x is the score, μ is the mean, and σ is the standard deviation.
For the 5th percentile, we want to find the score that 5% of test takers scored below. Using a standard normal distribution table or calculator, we find that the z-score corresponding to the 5th percentile is approximately -1.645.
-1.645 = (x - 516) / 116
Solving for x, we get:
x = -1.645 * 116 + 516 = 333.22
So the score separating the bottom 5% from the rest is approximately 333.22.
For the 95th percentile, we want to find the score that 95% of test takers scored below. Using the same method, we find that the z-score corresponding to the 95th percentile is approximately 1.645.
1.645 = (x - 516) / 116
Solving for x, we get:
x = 1.645 * 116 + 516 = 698.78
So the score separating the top 5% from the rest is approximately 698.78.
Therefore, the scores that separate the middle 90% of test takers from the bottom and top 5% are 333.22 and 698.78, respectively.
Read more about SAT.
https://brainly.com/question/9087649
#SPJ11
how many integers from 1 through 999 do not have any repeated digits?
There are 648 integers from 1 through 999 that do not have any repeated digits.
To solve this problem, we can break it down into three cases:
Case 1: Single-digit numbers
There are 9 single-digit numbers (1, 2, 3, 4, 5, 6, 7, 8, 9), and all of them have no repeated digits.
Case 2: Two-digit numbers
To count the number of two-digit numbers without repeated digits, we can consider the first digit and second digit separately. For the first digit, we have 9 choices (excluding 0 and the digit chosen for the second digit). For the second digit, we have 9 choices (excluding the digit chosen for the first digit). Therefore, there are 9 x 9 = 81 two-digit numbers without repeated digits.
Case 3: Three-digit numbers
To count the number of three-digit numbers without repeated digits, we can again consider each digit separately. For the first digit, we have 9 choices (excluding 0). For the second digit, we have 9 choices (excluding the digit chosen for the first digit), and for the third digit, we have 8 choices (excluding the two digits already chosen). Therefore, there are 9 x 9 x 8 = 648 three-digit numbers without repeated digits.
Adding up the numbers from each case, we get a total of 9 + 81 + 648 = 738 numbers from 1 through 999 without repeated digits. However, we need to exclude the numbers from 100 to 199, 200 to 299, ..., 800 to 899, which each have a repeated digit (namely, the digit 1, 2, ..., or 8). There are 8 such blocks of 100 numbers, so we need to subtract 8 x 9 = 72 from our total count.
Therefore, the final answer is 738 - 72 = 666 integers from 1 through 999 that do not have any repeated digits.
To know more about integers visit:
brainly.com/question/15276410
#SPJ11
2. consider the integral z 6 2 1 t 2 dt (a) a. write down—but do not evaluate—the expressions that approximate the integral as a left-sum and as a right sum using n = 2 rectanglesb. Without evaluating either expression, do you think that the left-sum will be an overestimate or understimate of the true are under the curve? How about for the right-sum?c. Evaluate those sums using a calculatord. Repeat the above steps with n = 4 rectangles.
a) The left-sum approximation for n=2 rectangles is:[tex](1/2)[(2^2)+(1^2)][/tex] and the right-sum approximation is:[tex](1/2)[(1^2)+(0^2)][/tex]
b) The left-sum will be an underestimate of the true area under the curve, while the right-sum will be an overestimate.
c) Evaluating the left-sum approximation gives 1.5, while the right-sum approximation gives 0.5.
d) The left-sum approximation for n=4 rectangles is:[tex](1/4)[(2^2)+(5/4)^2+(1^2)+(1/4)^2],[/tex] and the right-sum approximation is: [tex](1/4)[(1/4)^2+(1/2)^2+(3/4)^2+(1^2)].[/tex]
(a) The integral is:
[tex]\int (from 1 to 2) t^2 dt[/tex]
(b) Using n = 2 rectangles, the width of each rectangle is:
Δt = (2 - 1) / 2 = 0.5
The left-sum approximation is:
[tex]f(1)\Delta t + f(1.5)\Delta t = 1^2(0.5) + 1.5^2(0.5) = 1.25[/tex]
The right-sum approximation is:
[tex]f(1.5)\Delta t + f(2)\Deltat = 1.5^2(0.5) + 2^2(0.5) = 2.25[/tex]
(c) For the left-sum, the rectangles extend from the left side of each interval, so they will underestimate the area under the curve.
For the right-sum, the rectangles extend from the right side of each interval, so they will overestimate the area under the curve.
Using a calculator, we get:
∫(from 1 to 2) t^2 dt ≈ 7/3 = 2.3333
So the left-sum approximation is an underestimate, and the right-sum approximation is an overestimate.
(d) Using n = 4 rectangles, the width of each rectangle is:
Δt = (2 - 1) / 4 = 0.25
The left-sum approximation is:
[tex]f(1)\Delta t + f(1.25)\Delta t + f(1.5)\Delta t + f(1.75)\Delta t = 1^2(0.25) + 1.25^2(0.25) + 1.5^2(0.25) + 1.75^2(0.25) = 1.5625[/tex]The right-sum approximation is:
[tex]f(1.25)\Delta t + f(1.5)\Delta t + f(1.75)\Delta t + f(2)Δt = 1.25^2(0.25) + 1.5^2(0.25) + 1.75^2(0.25) + 2^2(0.25) = 2.0625.[/tex]
Using a calculator, we get:
[tex]\int (from 1 to 2) t^2 dt \approx 7/3 = 2.3333[/tex]
So the left-sum approximation is still an underestimate, but it is closer to the true value than the previous approximation.
The right-sum approximation is still an overestimate, but it is also closer to the true value than the previous approximation.
For similar question on rectangles.
https://brainly.com/question/27035529
#SPJ11
A bag of pennies weighs 711.55 grams. Each penny weighs 3.5 grams. About how many pennies are in the bag? *
Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.
To find out the number of pennies in a bag that weighs 711.55 grams, we need to divide the total weight by the weight of each penny. We know that each penny weighs 3.5 grams,
therefore: Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)
Therefore, there are about 203 pennies in the bag. To summarize the answer in a long answer format, we can write: We can find the number of pennies in the bag by dividing the total weight of the bag by the weight of each penny. Given that each penny weighs 3.5 grams, we can find out the number of pennies by dividing 711.55 grams by 3.5 grams.
Therefore, Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)
Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.
To know more about number visit:
https://brainly.com/question/3589540
#SPJ11
A survey asks a group of students if they buy CDs or not. It also asks if the students own a smartphone or not. These values are recorded in the contingency table below. Which of the following tables correctly shows the expected values for the chi- square homogeneity test? (The observed values are above the expected values.) CDs No CDs Row Total 23 14 37 Smartphone No Smartphone Column Total 14 22 36 37 36 73 Select the correct answer below: CDs No CDs No CDs Row Total 23 14 37 Smartphone 18.8 18.2 14 22 36 No Smartphone | 18.2 17.8 Column Total 37 36 73 CDs No CDs Row Total 23 14 37 Smartphone 19.8 16.2 14 22 36 No Smartphone 20.2 15.8 Column Total 37 36 73 CDs No CDs Row Total 23 14 37 Smartphone 20.8 17.2 14 22 36 No Smartphone 16.2 15.8 Column Total 37 36 73 O CDs No CDs No CDs Row Total 23 14 37 Smartphone 20.8 19.2 14 22 36 No Smartphone 16.2 16.8 Column Total 37 36 73
The correct answer is: CDs No CDs Row Total 23 14 37 Smartphone 20.8 19.2 14 22 36 No Smartphone 16.2 16.8 Column Total 37 36 73 using contingency table.
This table shows the expected values for the chi-square homogeneity test. These values were obtained by calculating the expected frequencies based on the row and column totals and the sample size. The observed values are compared to the expected values to determine if there is a significant association between the two variables (buying CDs and owning a smartphone) using contingency table.
A statistical tool used to show the frequency distribution of two or more categorical variables is a contingency table, sometimes referred to as a cross-tabulation table. It displays the number or percentage of observations for each set of categories for the variables. Using contingency tables, you may spot trends and connections between several variables.
Learn more about contingency table here:
https://brainly.com/question/30407883
#SPJ11
An open-top box with a square bottom and rectangular sides is to have a volume of 256 cubic inches. Find the dimensions that require the minimum amount of material.
The dimensions that require the minimum amount of material for the open-top box are:
Length = 8 inches, Width = 8 inches, Height = 4 inches.
What are the dimensions for minimizing material usage?To find the dimensions that minimize the amount of material needed, we can approach the problem by using calculus and optimization techniques. Let's denote the length of the square bottom as "x" inches and the height of the box as "h" inches. Since the volume of the box is given as 256 cubic inches, we have the equation:
Volume = Length × Width × Height = x² × h = 256.
To minimize the material used, we need to minimize the surface area of the box. The surface area consists of the bottom area (x²) and the combined areas of the four sides (4xh). Therefore, the total surface area (A) is given by the equation:
A = x² + 4xh.
We can solve for h in terms of x using the volume equation:
h = 256 / (x²).
Substituting this expression for h in terms of x into the surface area equation, we get:
A = x² + 4x(256 / (x²)).
Simplifying further, we obtain:
A = x² + 1024 / x.
To minimize A, we take the derivative of A with respect to x, set it equal to zero, and solve for x:
dA/dx = 2x - 1024 / x² = 0.
Solving this equation yields x = 8 inches. Plugging this value back into the equation for h, we find h = 4 inches.
Therefore, the dimensions that require the minimum amount of material are: Length = 8 inches, Width = 8 inches, and Height = 4 inches.
Learn more about Optimization techniques
brainly.com/question/28315344
#SPJ11
how many teenagers (people from ages 13-19) must you select to ensure that 4 of them were born on the exact same date (mm/dd/yyyy)? simplify your answer to an integer.
Assuming that there are 365 days in a year (ignoring leap years) and that all dates are equally likely, we can use the Pigeonhole Principle to determine the minimum number of teenagers needed to ensure that 4 of them were born on the same date.
There are 365 possible days in a year on which a person could be born. Therefore, if we select k teenagers, the total number of possible birthdates is 365k.
To guarantee that 4 of them were born on the exact same date, we need to find the smallest value of k for which 365k is greater than or equal to 4 times the number of possible birthdates. In other words:365k ≥ 4(365)
Simplifying this inequality, we get: k ≥ 4
Therefore, we need to select at least 4 + 1 = 5 teenagers to ensure that 4 of them were born on the exact same date.
To know more about "Pogeonhole Principle" refer here:
https://brainly.com/question/31687163#
#SPJ11
under what conditions will a diagonal matrix be orthogonal?
A diagonal matrix can only be orthogonal if all of its diagonal entries are either 1 or -1.
For a matrix to be orthogonal, it must satisfy the condition that its transpose is equal to its inverse. For a diagonal matrix, the transpose is simply the matrix itself, since all off-diagonal entries are zero. Therefore, for a diagonal matrix to be orthogonal, its inverse must also be equal to itself. This means that the diagonal entries must be either 1 or -1, since those are the only values that are their own inverses. Any other diagonal entry would result in a different value when its inverse is taken, and thus the matrix would not be orthogonal. It's worth noting that not all diagonal matrices are orthogonal. For example, a diagonal matrix with all positive diagonal entries would not be orthogonal, since its inverse would have different diagonal entries. The only way for a diagonal matrix to be orthogonal is if all of its diagonal entries are either 1 or -1.
Learn more about orthogonal here
https://brainly.com/question/30772550
#SPJ11
Show that the given set v is closed under addition and multiplication by scalars and is therefore a subspace of R^3. V is the set of all [x y z] such that 9x = 4ya + b = [ ] [ ] (Simplify your answer)
The scalar multiple [cx, cy, cz] satisfies the condition for membership in V. Therefore, V is closed under scalar multiplication.
To show that the set V is a subspace of ℝ³, we need to demonstrate that it is closed under addition and scalar multiplication. Let's go through each condition:
Closure under addition:
Let [x₁, y₁, z₁] and [x₂, y₂, z₂] be two arbitrary vectors in V. We need to show that their sum, [x₁ + x₂, y₁ + y₂, z₁ + z₂], also belongs to V.
From the given conditions:
9x₁ = 4y₁a + b ...(1)
9x₂ = 4y₂a + b ...(2)
Adding equations (1) and (2), we have:
9(x₁ + x₂) = 4(y₁ + y₂)a + 2b
This shows that the sum [x₁ + x₂, y₁ + y₂, z₁ + z₂] satisfies the condition for membership in V. Therefore, V is closed under addition.
Closure under scalar multiplication:
Let [x, y, z] be an arbitrary vector in V, and let c be a scalar. We need to show that c[x, y, z] = [cx, cy, cz] belongs to V.
From the given condition:
9x = 4ya + b
Multiplying both sides by c, we have:
9(cx) = 4(cya) + cb
This shows that the scalar multiple [cx, cy, cz] satisfies the condition for membership in V. Therefore, V is closed under scalar multiplication. Since V satisfies both closure conditions, it is a subspace of ℝ³.
To know more about scalar multiplication refer to
https://brainly.com/question/8349166
#SPJ11