Answer:
2. A 3.C
Explanation:
1. Calculate how many moles of glycine are in a 130.0-g sample of glycine.2. Calculate the percent nitrogen by mass in glycine.
Answer:
[tex]n=1.732mol[/tex]
[tex]\% N=18.7\%[/tex]
Explanation:
Hello!
In this case, since the molecular formula of glycine is C₂H₅NO₂, we realize that the molar mass is 75.07 g/mol; thus, the moles in 130.0 g of glycine are:
[tex]n=130.0g*\frac{1mol}{75.07 g}\\\\ n=1.732mol[/tex]
Furthermore, we can notice 75.07 grams of glycine contains 14.01 grams of nitrogen; thus, the percent nitrogen turns out:
[tex]\% N=\frac{14.01}{75.07}*100\% \\\\\% N=18.7\%[/tex]
Best regards!
Is snow organic or inorganic?
Answer:
snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.
Explanation:
I hope I helped!!
Plz mark me brainliest it would really make my day!
Answer:
I think its organic unless we are talking about this snow storm then no
When a chemical reaction is run in aqueous solution inside a calorimeter, the temperature change of the water (and Ccal) can be used to calculate the enthalpy change for the reaction. Here, we will study the reaction of hydrochloric acid with sodium hydroxide in the calorimeter from problem 3. Equal volumes (50.0 mL) of 1.00 M sodium hydroxide and 1.00 M hydrochloric acid are mixed.
HCl+NaOH→NaCl+H2O
1. What is the total change in enthalpy (in Joules) for the reaction?
2. Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 j
Answer:
The total change in enthalpy for the reaction is - 81533.6 J/mol
Explanation:
Given the data in the question;
Reaction;
HCl + NaOH → NaCl + H₂O
Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 J
Moles of NaOH = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
Moles of HCl = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
so, 0.0500 moles of H₂O produced
Volume of solution = 50.mL + 50.mL = 100.0 mL
Mass of solution m = volume × density = 100.0mL × 1.0 g/mL = 100 g
now ,
Heat energy of Solution q= (mass × specific heat capacity × temp Δ) + Cal
we know that; The specific heat of water(H₂O) is 4.18 J/g°C.
so we substitute
q_soln = (100g × 4.18 × ( 28.0 °C - 21.2 °C) ) + 1234.28
q_soln = 2842.4 + 1234.28
q_soln = 4076.68 J
Enthalpy change for the neutralization is ΔH[tex]_{neutralization}[/tex]
ΔH[tex]_{neutralization}[/tex] = -q_soln / mole of water produced
so we substitute
ΔH[tex]_{neutralization}[/tex] = -( 4076.68 J ) / 0.0500 mol
ΔH[tex]_{neutralization}[/tex] = - 81533.6 J/mol
Therefore, the total change in enthalpy for the reaction is - 81533.6 J/mol
Indicate whether each structure is aromatic, nonaromatic, or antiaromatic. Assume planarity. Compound A is a 5 membered heterocyclic ring containing two pi bonds. On one of the pi bonds is a sulfur with one lone pair and a positive charge. There is an N H group between the two pi bonds with one lone pair. Compound B is a 6 membered ring with three pi bonds. One of the ring atoms is a protonated oxygen with one lone pair. Compound C is an 8 membered ring with a double bond between carbons 2 and 3, between carbons 5 and 6 and between carbons 7 and 8. There is a positive charge on carbon 4 and a negative charge and lone pair on carbon 1. Compound D is a 7 membered ring with three pi bonds. In between two alkenes is a boron attached to a hydrogen. Comppound E is a 7 membered ring with three pi bonds. In between two alkenes is a negative charge with a lone pair.
Answer:
this some next level stuff homie
Explanation:
imma just guess 7?
The thing being described is shaped like a ring with five parts. Inside the ring, there are two special types of bonds. This has a sulfur that is positively charged and has one unshared pair, also it has an NH group with one unshared pair.
What is the structureCompound B is a substance that is made up of two or more different elements or molecules.
The thing being described has a ring with six members and three pi bonds. It has an oxygen atom with an extra proton and one extra electron. This substance is not aromatic.
Read more about aromatic here:
https://brainly.com/question/30624539
#SPJ6
What mass of Iron (III) acetate will be produced when 1.50 grams of iron reacts in acetic acid?
Fe + H(C2H3O2) ® Fe(C2H3O2)3 + H2
Answer:
Fe + H(C2H3O2) ........
Excess silver(I) nitrate was added to a 8.500 g mixture containing some amount of barium chloride, and 7.123 g of silver chloride was obtained. The unbalanced equation is
AgNO3 + BaCl2(aq) --> Ba(NO3)2(aq) + AgCl(s).
What is the mass% of BaCl2 in the mixture?
Answer:
60.88%
Explanation:
The balanced equation of the reaction is given as;
2 AgNO3 (aq) + BaCl2 (aq) → 2 AgCl (s) + Ba(NO3)2 (aq)
Since AgNO3 is in excess, the limiting reactant is BaCl2. From the reaction;
1 mol of BaCl2 produces 2 mol of AgCl
Converting to masses;
Mass = Number of mol * Molar mass
BaCl2;
Mass = 1 * 208.23 g/mol = 208.23 g
AgCl;
Mass = 2 * 143.32 g/mol = 286.64 g
208.23 g BaCl2 produces 286.64 g of AgCl
x g BaCl2 produces 7.123 g of AgCl
Solving for x;
x = 7.123 * 208.23 / 286.64 = 5.1745 g
Mass percent = Mass / Total mass of Mixture * 100
Mass Percent = 5.1745 / 8.500 = 0.6088 * 100 = 60.88%
does a mole of hydrogen have the same mass as a mole of oxygen? explain your answer
Put the following elements in order of increasing atomic number:
1. Strontium
2. Fluorine
3. Terbium
4. Zirconium
5. Iodine
6. Europium
7. Gallium
8. Aluminum
Answer:
Here is the answer ⬆️⬆️⬆️⬆️⬆️⬆️⬆️
The order of the given elements in increasing atomic number is given as F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
What is atomic number?The atomic number of an element in periodic table is the number of electrons in its neutral atom. Elements are arranged in periodic table in an increasing order of atomic number from left to right.
An atom is composed of electrons, protons and neutrons. Protons are positively charged and electrons are negatively charged particles and they are equal in an atom. Thus, the total negative charge is neutralised by the negative charges.
The order for the given elements in periodic table in an increasing atomic number is F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
To find more on atomic number, refer here:
https://brainly.com/question/14190064
#SPJ2
Prokaryotic cell division is a___________process involving onc chromosom.
A. simple
B. complex
C. unusual
Answer:
It’s is a simple
Explanation:the prokaryotic cell involves a simple process which intern involves one chromosom
does warm air or cool air hold more humidity.
Answer:
warm
Explanation:
You dissolve 0.64 g of potassium chloride (KCl) in 725 ml of water.
What is the molarity of the solution?
(From the periodic table: 1 mol K = 39.10 g; 1 mol Cl = 35.453 g)
Enter the value rounded to three decimal places with no units
Will give BRAINLEST
Answer:
0.012 M
Explanation:
Step 1: Given and required data
Mass of KCl (m): 0.64 gVolume of water (V): 725 mL (We will assume it is equal to the volume of the solution)Molar mass of KCl (M): 74.553 g/molStep 2: Calculate the moles (n) of solute (KCl)
We will use the following expression.
n = m/M = 0.64 g / (74.553 g/mol) = 8.6 × 10⁻³ mol
Step 3: Calculate the molar concentration (C) of the solution
The molarity is equal to the moles of solute divided by the liters of solution.
C = 8.6 × 10⁻³ mol/0.725 L = 0.012 M
the Rockies and the Appalachians are two major mountain ranges in the United States. Which type of plate movement caused these mountain ranges to form
Answer:
Convergent
Explanation:
I don't know whether this is one of your answers but It is convergent because convergent boundaries are when two plates collide against each other which can create mountains and volcanos.
How many CaF are in a 1.7x10^25 please I need help fast!!
28 mol CaF
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 1.7 × 10²⁵ molecules CaF
[Solve] moles CaF
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 1.7 \cdot 10^{25} \ molecules \ CaF(\frac{1 \ mol \ CaF}{6.022 \cdot 10^{23} \ molecules \ CaF})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 28.2298 \ moles \ CaF[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
28.2298 mol CaF ≈ 28 mol CaF
How many atoms are in phosgene
Answer:
3 atoms
Explanation:
there is one calcium and two chlorine
In the lab activity, the reaction rate was determined by the appearance of a product. However, the reaction rate can also be determined by the disappearance of a reactant. Rate =Δ[product]/Δt or rate−Δ[reactant]Δt. In each situation below, you are given a rate measured by the appearance of one component of the reaction and are asked to predict the rate of appearance or disappearance of another component, based on logic and stoichiometric relationships.
For example, if the reaction is as follows:
A+2B⟶products
For every mole of A that is used, 2 moles of B are used so the rate of disappearance of B is twice the rate of the disappearance of A.
This may be expressed as:
rate=−Δ[B]/Δt=−2[A]/Δt , N2(g)+3H2(g)⟶2NH3(g)
The reaction rate is measured as 0.032 M NH3/s. Determine the rate of disappearance of N2 and the rate of disappearance of H2. Explain how you arrived at your answers.
Answer: Rate of disappearance of [tex]N_2[/tex]= 0.032 M/s
Rate of disappearance of [tex]H_2[/tex] = 0.096 M/s
Explanation:
Rate law says that rate of a reaction is directly proportional to the concentration of the reactants each raised to a stoichiometric coefficient determined experimentally called as order.
[tex]N_2(g)+3H_2(g)\rightarrow 2NH_3(g)[/tex]
The rate in terms of reactants is given as negative as the concentration of reactants is decreasing with time whereas the rate in terms of products is given as positive as the concentration of products is increasing with time.
Rate in terms of disappearance of [tex]N_2[/tex] = [tex]-\frac{1d[N_2]}{dt}[/tex]
Rate in terms of disappearance of [tex]H_2[/tex] = [tex]-\frac{1d[H_2]}{3dt}[/tex]
Rate in terms of appearance of [tex]NH_3[/tex] = [tex]\frac{1d[NH_3]}{2dt}[/tex]
Rate = [tex]-\frac{1d[N_2]}{dt}=-\frac{1d[H_2]}{3dt}=\frac{1d[NH_3]}{2dt}[/tex]
Given : = 0.032 M/s
Rate of disappearance of =
Rate of disappearance of [tex]H_2[/tex] = [tex]-\frac{d[H_2]}{dt}=3\times 0.032M/s=0.096M/s[/tex]
What type of reaction
the following chemical reaction?
2C2H4O2 → C4H6O3 + H2O
Which of the following destroys the marine ecosystem?
A. fishpond C. dynamite fishing
B. reclamation D. constructing man-made sanctuaries
Answer:
The correct one is dynamite fishing
At room temperature, CsF is expected to be:______.
a. a soft solid.
b. a conducting solid.
c. a gas.
d. a brittle solid.
e. a liquid.
Answer:
d. a brittle solid.
Explanation:
Hello!
In this case, since cesium fluoride is widely known as an ionic compound due to the large electronegativity difference, it is possible to discard a. due to its crystalline structure, b. because conducting solids are metals, c. because ionic compounds are not likely to be gases and e. because even when it is soluble in water, the problem is not referring to an aqueous solution; therefore, the answer is d. a brittle solid.
Best regards!
Father, I come to you worn and weary from the hard times I have walked through recently. I come to you seeking your shelter where I know I can find security and rest in your shadow. Father, you are mighty. I know my circumstances are no match for Your great power. Father I place a healing of these people that they feel a conviction in there heart that they would turn from there wicked way and turn to you father. IN JESUS NAME AMEN
Answer:
Fact: There’s only one letter that doesn’t appear in any U.S. state name
And that is Q
Explanation:
Titanium(IV) chloride decomposes to form titanium and chlorine, like this:
TiCl4(l) → Ti(s)+ 2Cl2(g)
At a certain temperature, a chemist finds that a reaction vessel containing a mixture of titanium(IV) chloride, titanium, and chlorine at equilibrium has the following composition:
Compound Amount
TiCl4 4.18g
Ti 1.32g
Cl2 1.08g
Required:
Calculate the value of the equilibrium constant for this reaction.
The full question is shown in the image attached to this answer
Answer:
6.2 * 10^-3
Explanation:
The reaction at equilibrium is as follows;
TiCl4(l) → Ti(s)+ 2Cl2(g)
We have to obtain the concentration of chlorine gas as follows;
[Cl2] = 1.08/70.91 g/mol × 5.2 L
[Cl2] = 0.079 M
Kc = [Cl2]^2
Kc = [ 0.079]^2
Kc = 6.2 * 10^-3
Iron-59 which is used to diagnose anaemia has a half life of 45days, what fraction of it is left in 90 days
Answer:
0.25 of the original
Explanation:
(0.5)^(90/45)
The fraction of iron-59 after 90 days is 0.25.
Iron-59 decays following first-order kinetics. Given the half-life ([tex]t_{1/2}[/tex]) of 45 days, we can calculate the rate constant (k) using the following expression.
[tex]k = \frac{ln2}{t_{1/2}} =\frac{ln2}{45day} = 0.015 d^{-1}[/tex]
For first-order kinetics, we can find the fraction of Fe ([Fe]/[Fe]₀) after and an elapsed time (t) of 90 days, using the following equation.
[tex]\frac{[Fe]}{[Fe]_0} =e^{-k \times t } = e^{-0.015 d^{-1} \times 90 d } \approx 0,25[/tex]
The fraction of iron-59 after 90 days is 0.25.
You can learn more about kinetics here:
https://brainly.com/question/2284525
Which of the following is evidence that a chemical
change is occurring?
a. Cherry drink mix is added to water and the resulting
solution is red.
b. A white powder is added to cool tap water in a beaker
and the beaker gets hot.
c. Water is added to coffee until the solution becomes
clear.
d. Water is added to sand and the sand looks darker
Answer:
c. water is added to coffe until the solution becomes clear
Answer:
c
Explanation:
Water is added to coffee until the solution becomes
clear.
How many moles are there in 2.30 x 1024 atoms of silver?
Answer:
Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).
Step 1
Use dimensional analysis to convert the number of atoms to moles.
1 mole atoms = 6.022 × 10²³ atoms
n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag
Step 2
Convert the moles of Ag to mass.
mass (m) = moles (n) × molar mass (M)
n(Ag) = 3.8193 mol Ag
M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag
m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures
The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.
Explanation:
The number of moles that are present is 2.3 × 10²⁴ atoms of silver are 3.8193 moles that can be determined using Avogadro's law.
The calculation for number of moles:One mole:
A mole is defined as 6.022 × 10²³ of some chemical unit, be it atoms, molecules, ions, or others.
1 mole = 6.022 × 10²³ atoms
n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms)
n(Ag) = 3.8193 mol Ag
Thus, the number of moles is 3.8193 moles.
Find more information about one mole here:
brainly.com/question/1358482
Both amines and amides are derivatives of
acetic acid
sodium hydroxide
ammonia
sodium chloride
Answer:
Ammonia
Explanation:
Both amines and amides are structurally similar to ammonia, the difference is the introduction of a carbon into the structure.
I need help plz quick on my homework its due at 11 i will give branliest to correct answer its on limiting reagents.
Answer:4.2 6.4 6.7 9.5 5.5 3.8
Explanation:
In a technique used for surface analysis called auger electron spectroscopy (AES), electrons are accelerated toward a metal surface. These electrons cause the emissions of secondary electrons (called auger electrons) from the metal surface. The kinetic energy of the auger electrons depends on the composition of the surface. The presence of oxygen atoms on the surface results in auger electrons with a kinetic energy of approximately 520 eV .
Required:
What is the de Broglie wavelength of one of these electrons?
Answer:
the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m
Explanation:
Given the data in the question;
we know that; ( electron volt ) 1 eV = 1.602 × 10⁻¹⁹ J
so given that Kinetic Energy KE = 520 eV
KE = 520 × 1.602 × 10⁻¹⁹ = 8.3304 × 10⁻¹⁷ J
we know that;
Kinetic Energy = 1/2 × mv²
where m is the electron mass
and mass of electron is 9.109 × 10⁻³¹ kilograms
so
8.3304 × 10⁻¹⁷ = 1/2 × 9.109 × 10⁻¹⁷× v²
v = √[(8.3304 × 10⁻¹⁷) / (1/2 × 9.109 × 10⁻³¹)]
v = 1.3524 × 10⁷ m/s
speed of the electron v = 1.3524 × 10⁷ m/s
now, de Broglie equation;
wavelength λ = h / mv
where h is Planck constant ( 6.626 × 10⁻³⁴ m² kg / s )
so we substitute
wavelength λ = 6.626 × 10⁻³⁴ / ( 9.109 × 10⁻³¹ × 1.3524 × 10⁷)
wavelength λ = 5.3787 × 10⁻¹¹ m
Therefore, the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m
1
What is the name of Ba3(PO4)2?
O a. Tribarium Diphosphate
tof
O b. Triboron Diphosphate
O c. Boron Phosphate
O d. Barium Phosphate
Answer:
The answer is barium phosphate
3. Una piedra que se tira verticalmente hacia arriba se mueve según la
leys = 64y - 8t^2, si "s" se mide en pies (ft) y t en segundos, hallar:
a) SU posición y velocidad después de dos segundos y después de tres
segundos.
b) ¿Qué altura alcanzará?
c) ¿A qué distancia se moverá al cabo del cuarto segundo?
Answer:
Explanation:
Para mejor entendimiento, reeescribiremos la ley que pusiste:
S = 64t - 8t² (1)
De acuerdo al enunciado del problema, S tiene unidades de pie y t en segundos, por lo tanto, S, que se refiere a la posición o altura alcanza de la piedra, puede ser determinado usando esa expresión a tiempos específicos.
Para el calculo de velocidad usamos la siguiente expresión:
V = -g * t (2) g: 32.16 ft/s
Tomando en cuenta estas expresiones, veamos los valores de posición y velocidad:
a) Para t = 2 s
S = 64(2) - 8(2)²
S = 96 ft
V = -32.16 * 2
V = -64.32 ft/s
Para t = 3 s
S = 64(3) - 8(3)²
S = 120 ft
V = -32.16 * 3
V = -96.48 ft/s
b) Para saber la altura que alcanzará, usamos la expresión de altura máxima que es la siguiente:
Smáx = -V₀² / 2g (3)
Para el valor de la velocidad inicial, podemos asumir el valor de la velocidad dada por la formula de la ley S, que es 64. Esto porque al ser multiplicado por el valor del tiempo, queda en unidades de distancia, asi que este valor debe tener unidades de velocidad. Reemplazando este valor en la expresión:
Smáx = -(64)² / 2 * 32.16
Smáx = 63.68 ft
c) Para esta parte, usamos nuevamente la formula de la ley S, usando t = 4 s y listo:
S = 64(4) - 8(16)
S = 128 ft
Espero te sirva
who is the father of phycis
Galileo Galilei
hope it helps you
Answer:
Galileo Galilei is the father of Physics
I hope it helps ❤❤
What is the main FUNCTION of the digestive system?
What are some of the main organs of the digestive system?