When a certain capacitor carries charge of magnitude Q on each of its plates, it stores energy Ep. In order to store twice as much energy, how much charge should it have on its plates

Answer:

15amps

Explanation:

V=IR

I=V/R

I = 120/8

I = 15 amps

Answer:

Coriolis force is a type of force of inertia that acts on objects that is in motion within a frame of reference that rotates with respect to an inertial frame. Due to the rotation of the earth, circulating air is deflected result of the Coriolis force, instead of the air circulating between the earth poles and the equator in a straight manner. Because of the effect of the Coriolis force,  air movement deflects toward the right in the Northern Hemisphere and toward the left in the Southern Hemisphere, eventually taking a curved path of travel.

Speed = (distance) / (time)

Speed = (1,233 mile) / (2.4 hour)

Speed = 513.75 mile/hour

Speed = (513.75 mi/hr) x (1609.344 meter/mi) x (1 hr / 3600 sec)

Speed = (513.75 x 1609.344 / 3600) (mile-meter-hour/hour-mile-second)

Speed = 229.7 meter/second

Answer: If we have equilibrium, the magnitude must be zero.

Explanation:

If the charges are in equilibrium, this means that the total charge is equal to zero.

And as the charges must be homogeneously distributed in the rod, we can conclude that the electric field within the rod must be zero, so the magnitude of the electric field must be zero

Answer:

  p₁ = - p₂

the moment value of the two particles is the same, but its direction is opposite

Explanation:

When a nucleus divides spontaneously, the moment of the nucleic must be conserved, for this we form a system formed by the initial nucleus and the two fragments of the fission, in this case the forces during the division are internal and the moment is conserved

initial instant. Before fission

               p₀ = 0

since they indicate that the nucleus is at rest

final moment. After fission

             [tex]p_{f}[/tex] = m₁ v₁ + m₂ v₂

             p₀ = p_{f}

             0 = m₁ v₁ + m₂v₂

             m₁ v₁ = -m₂ v₂

              p₁ = - p₂

this indicates that the moment value of the two particles is the same, but its direction is opposite

Complete question:

A force F is applied to the block as shown (check attached image). With an applied force of 1.5 N, the block moves with a constant velocity.

Approximately what applied force is needed to keep the box moving with a constant velocity that is twice as fast as before? Explain

Answer:

The applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N

Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the initially applied force.

Explanation:

Given;

magnitude of applied force, F = 1.5 N

Apply Newton's second law of motion;

F = ma

[tex]F = m(\frac{v}{t} )\\\\F = \frac{m}{t} v\\\\Let \ \frac{m}{t} \ be \ constant = k\\F = kv\\\\k = \frac{F}{v} \\\\\frac{F_1}{v_1} = \frac{F_2}{v_2}[/tex]

The applied force needed to keep the box moving with a constant velocity that is twice as fast as before;

[tex]\frac{F_1}{v_1} = \frac{F_2}{v_2} \\\\(v_2 = 2v_1, \ and \ F_1 = 1.5N)\\\\\frac{1.5}{v_1} = \frac{F_2}{2v_1} \\\\1.5 = \frac{F_2}{2}\\\\F_2 = 2*1.5\\\\F_2 = 3 N[/tex]

Therefore, the applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N

Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the applied force.

Answer:

(c) always equal to the weight of the liquid displaced.

Explanation:

Archimedes principle (also called physical law of buoyancy) states that when an object is completely or partially immersed in a fluid (liquid, e.t.c), it experiences an upthrust (or buoyant force) whose magnitude is equal to the weight of the fluid displaced by that object.

Therefore, from this principle the best option is C - always equal to the weight of the liquid displaced.

Answer:

D). Uranus.

Explanation:

Jovian planets are described as the planets which are giant balls of gases and located farthest from the sun which primarily include Jupiter, Saturn, Uranus, and Neptune.

As per the question, 'Uranus' is the jovian planet that would have the most extreme seasonal changes as its tilted axis leads each season to last for about 1/4 part of its 84 years orbit. The strong tilted axis encourages extreme changes in the season on Uranus. Thus, option D is the correct answer.

Answer:

A)    θ = 28.1º , B)         v = 2.47 m / s

Explanation:

A) The angle of the ramp can be found using trigonometry

         sin θ = y / L

         Φ = sin⁻¹ y / L

         θ = sin⁻¹ (115/244)

         θ = 28.1º

B) For this pate we can use the relationship between work and kinetic energy

       W =ΔK

where the work is

       W = -fr x

the negative sign is due to the fact that the friction force closes against the movement

Lavariacion of energy cineta is

         ΔEm = ½ m v² - mgh

        -fr x = ½ m v² - m gh

the friction force has the equation

         fr = very N

at the highest part there is no speed and we take the origin from the lowest part of the ramp

To find the friction force we use Newton's second law. Where one axis is parallel to the ramp and the other is perpendicular

Axis y . perpendicular

            N- Wy = 0

            cos tea = Wy / W

            Wy = W cos treaa

             N = mg cos tea

we substitute

- (very mg cos tea) x = ½ m v²2 - mgh

            v2 = m (gh- very g cos tea x)

   let's calculate

           v = Ra (9.8 0.80 - 0.2 9.8 0.0 cos 28.1)

           v = RA (7.84 -1.729)

           v = 2.47 m / s

Answer:

I₂/I₁ = 0.53

Explanation:

During the motion the angular momentum of the skater remains conserved. Therefore:

Angular Momentum of Skater Before Pulling Arms = Angular Momentum of Skater After Pulling Arms

L₁ = L₂

but, the formula for angular momentum is:

L = Iω

Therefore,

I₁ω₁ = I₂ω₂

I₂/I₁ = ω₁/ω₂

where,

I₁ = Initial Moment of Inertia

I₂ = Final Moment of Inertia

ω₁ = Initial Angular Velocity = 3.14 rad/s

ω₂ = Final Angular velocity = 5.94 rad/s

Therefore,

I₂/I₁ = (3.14 rad/s)/(5.94 rad/s)

I₂/I₁ = 0.53

Answer:

14.79 kgm/s

Explanation:

Data provided in the question

Let us assume the mass of baseball =  m = 0.145 kg

The Initial velocity of pitched ball = [tex]v_i[/tex] = 47 m/s

Final velocity of batted ball in the opposite direction = [tex]v_f[/tex]= -55m/s

Based on the above information, the change in momentum is

[tex]\Delta P = m(v_f -v_i)[/tex]

[tex]= 0.145 kg(-55m/s - 47m/s)[/tex]    

= 14.79 kgm/s

Hence, the magnitude of the change in momentum of the ball is 14.79 kg m/s

Answer:

The sun will be located near the Gemini constellation at sunset

Explanation:

(a) Find the magnitude of the angular acceleration of the wheel.

(b) Find the angle in radians through which it rotates in this time interval.

Now we convert rad to angle

The angle in radians = 27.9°

Answer:

Cost = $ 1.48

Cost = $ 0.005

Cost = $ 0.38

Explanation:

given data

electrical transmission varies = $0.070/kWh to $0.258/kWh

average value = $0.110/kWh

solution

when leaving a 40-W porch light on for two weeks while you are on vacation so cost will be

first we get here energy consumed that is express as

E = Pt    .................1

here E is Energy Consumed and Power Delivered is P and t is time

so power is here 0.04 KW and t = 2 week = 336 hour

so

put value in 1 we get

E = 0.04 × 336

E = 13.44 KWh

so cost will be as

Cost = E × Unit Price    .............2

put here value and we get

Cost = 13.44 × 0.11

Cost = $ 1.48

and

when you making a piece of dark toast in 3.00 min with a 970-W toaster

so energy consumed will be by equation 1 we get

E = Pt

power is = 0.97 KW and time = 3 min = 0.05 hour

put value in equation 1 for energy consume

E = 0.97 × 0.05 h

E = 0.0485 KWh

and we get cost by w\put value in equation 2 that will be

cost =  E × Unit Price

cost = 0.0485 × 0.11

Cost = $ 0.005

and

when drying a load of clothes in 40.0 min in a 5.20 x 10^3-W dryer

from equation 1 we get energy consume

E = Pt

Power Delivered = 5.203 KW and time = 40 min = 0.67 hour

E = 5.203 × 0.67

E = 3.47 KWh

and

cost will by put value in equation 2

Cost = E × Unit Price

Cost = 3.47 × 0.11

Cost = $ 0.38

Answer:

14.1 m/s

Explanation:

From the question,

μk = a/g...................... Equation 1

Where μk = coefficient of kinetic friction, a= acceleration of the skier, g = acceleration due to gravity.

make a the subject of the equation

a = μk(g).................. Equation 2

Given: μk = 0.160, g = 9.8 m/s²

Substitute into equation 2

a = 0.16(9.8)

a = 1.568 m/s²

Using,

F = ma

Where F = force, m = mass.

Make m the subject of the equation

m = F/a................... Equation 3

m = 160/1.568

m = 102.04 kg.

Note: The work done against air resistance by the skier+ work done against friction is equal to the kinetic energy after cross the patch.

Assuming the initial velocity of the skier to be zero

Fd+mgμ = 1/2mv²........................Equation 4

Where v = speed of the skier after crossing the patch, d = distance/width of the patch.

v = √2(Fd+mgμ)/m)................ Equation 5

Given: F = 160 N, m = 102.04 kg, d = 62 m, g = 9.8 m/s, μk = 0.16

Substitute these values into equation 5

v = √[2[(160×62)+(102.04×9.8×0.16)]/102.04]

v = √197.57

v = 14.1 m/s

v = 9.86 m/s

Answer:

a) The first arrow reaches a maximum height of 56.712 meters, whereas second arrow reaches a maximum height of 342.816 meters, b) Both arrows have a total mechanical energy at their maximum height of 201.720 joules.

Explanation:

a) The first arrow is launch in a parabolic way, that is, horizontal speed remains constant and vertical speed changes due to the effects of gravity. On the other hand, the second is launched vertically, which means that velocity is totally influenced by gravity. Let choose the ground as the reference height for each arrow. Each arrow can be modelled as particles and by means of the Principle of Energy Conservation:

First arrow

[tex]U_{g,1} + K_{x,1} + K_{y,1} = U_{g,2} + K_{x,2} + K_{y,2}[/tex]

Where:

[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Initial and final gravitational potential energy, measured in joules.

[tex]K_{x,1}[/tex], [tex]K_{x,2}[/tex] - Initial and final horizontal translational kinetic energy, measured in joules.

[tex]K_{y,1}[/tex], [tex]K_{y,2}[/tex] - Initial and final vertical translational kinetic energy, measured in joules.

Now, the system is expanded and simplified:

[tex]m \cdot g \cdot (y_{2} - y_{1}) + \frac{1}{2}\cdot m \cdot (v_{y, 2}^{2} -v_{y, 1}^{2}) = 0[/tex]

[tex]g \cdot (y_{2}-y_{1}) = \frac{1}{2}\cdot (v_{y,1}^{2}-v_{y,2}^{2})[/tex]

[tex]y_{2}-y_{1} = \frac{1}{2}\cdot \frac{v_{y,1}^{2}-v_{y,2}^{2}}{g}[/tex]

Where:

[tex]y_{1}[/tex]. [tex]y_{2}[/tex] - Initial and final height of the arrow, measured in meters.

[tex]v_{y,1}[/tex], [tex]v_{y,2}[/tex] - Initial and final vertical speed of the arrow, measured in meters.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

The initial vertical speed of the arrow is:

[tex]v_{y,1} = v_{1}\cdot \sin \theta[/tex]

Where:

[tex]v_{1}[/tex] - Magnitude of the initial velocity, measured in meters per second.

[tex]\theta[/tex] - Initial angle, measured in sexagesimal degrees.

If [tex]v_{1} = 82\,\frac{m}{s}[/tex] and [tex]\theta = 24^{\circ}[/tex], the initial vertical speed is:

[tex]v_{y,1} = \left(82\,\frac{m}{s} \right)\cdot \sin 24^{\circ}[/tex]

[tex]v_{y,1} \approx 33.352\,\frac{m}{s}[/tex]

If [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{y,1} \approx 33.352\,\frac{m}{s}[/tex] and [tex]v_{y,2} = 0\,\frac{m}{s}[/tex], the maximum height of the first arrow is:

[tex]y_{2} - y_{1} = \frac{1}{2}\cdot \frac{\left(33.352\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{9.807\,\frac{m}{s^{2}} }[/tex]

[tex]y_{2} - y_{1} = 56.712\,m[/tex]

Second arrow

[tex]U_{g,1} + K_{y,1} = U_{g,3} + K_{y,3}[/tex]

Where:

[tex]U_{g,1}[/tex], [tex]U_{g,3}[/tex] - Initial and final gravitational potential energy, measured in joules.

[tex]K_{y,1}[/tex], [tex]K_{y,3}[/tex] - Initial and final vertical translational kinetic energy, measured in joules.

[tex]m \cdot g \cdot (y_{3} - y_{1}) + \frac{1}{2}\cdot m \cdot (v_{y, 3}^{2} -v_{y, 1}^{2}) = 0[/tex]

[tex]g \cdot (y_{3}-y_{1}) = \frac{1}{2}\cdot (v_{y,1}^{2}-v_{y,3}^{2})[/tex]

[tex]y_{3}-y_{1} = \frac{1}{2}\cdot \frac{v_{y,1}^{2}-v_{y,3}^{2}}{g}[/tex]

If [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{y,1} = 82\,\frac{m}{s}[/tex] and [tex]v_{y,3} = 0\,\frac{m}{s}[/tex], the maximum height of the first arrow is:

[tex]y_{3} - y_{1} = \frac{1}{2}\cdot \frac{\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{9.807\,\frac{m}{s^{2}} }[/tex]

[tex]y_{3} - y_{1} = 342.816\,m[/tex]

The first arrow reaches a maximum height of 56.712 meters, whereas second arrow reaches a maximum height of 342.816 meters.

b) The total energy of each system is determined hereafter:

First arrow

The total mechanical energy at maximum height is equal to the sum of the potential gravitational energy and horizontal translational kinetic energy. That is to say:

[tex]E = U + K_{x}[/tex]

The expression is now expanded:

[tex]E = m\cdot g \cdot y_{max} + \frac{1}{2}\cdot m \cdot v_{x}^{2}[/tex]

Where [tex]v_{x}[/tex] is the horizontal speed of the arrow, measured in meters per second.

[tex]v_{x} = v_{1}\cdot \cos \theta[/tex]

If [tex]v_{1} = 82\,\frac{m}{s}[/tex] and [tex]\theta = 24^{\circ}[/tex], the horizontal speed is:

[tex]v_{x} = \left(82\,\frac{m}{s} \right)\cdot \cos 24^{\circ}[/tex]

[tex]v_{x} \approx 74.911\,\frac{m}{s}[/tex]

If [tex]m = 0.06\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{max} = 56.712\,m[/tex] and [tex]v_{x} \approx 74.911\,\frac{m}{s}[/tex], the total mechanical energy is:

[tex]E = (0.06\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (56.712\,m)+\frac{1}{2}\cdot (0.06\,kg)\cdot \left(74.911\,\frac{m}{s} \right)^{2}[/tex]

[tex]E = 201.720\,J[/tex]

Second arrow:

The total mechanical energy is equal to the potential gravitational energy. That is:

[tex]E = m\cdot g \cdot y_{max}[/tex]

[tex]m = 0.06\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]y_{max} = 342.816\,m[/tex]

[tex]E = (0.06\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (342.816\,m)[/tex]

[tex]E = 201.720\,J[/tex]

Both arrows have a total mechanical energy at their maximum height of 201.720 joules.

Answer:

hand saws

power saws

Circular Saw

Explanation:

that is all that i know

Answer:

1) Φ=zero

2)  λ = 2π / k

3)   T = 2π / w

4)  v = w / k

Explanation:

The equation of a traveling wave is

     y = A sin (ka - wt + Ф)

Let's answer using this equation the different questions

1) we see that the equation given in the problem the phase is zero

2) wavelength

     k = 2π /λ

      λ = 2π / k

3) The perido

angular velocity is related to frequency

       w = 2π f

frequency and period are related

       f = 1 / T

       w = 2 π / T

        T = 2π / w

4) the wave speed is

         v = λ f

          λ = 2π / k

          f = w / 2π

          v = 2π /k  w /2π

           v = w / k

Answer:

The width is  [tex]Z = 0.0424 \ m[/tex]

Explanation:

From the question we are told that

    The width of the slit is [tex]d = 77.7 \mu m = 77.7 *10^{-6} \ m[/tex]

    The wavelength of the light is  [tex]\lambda = 721 \ nm[/tex]

      The position of the screen is  [tex]D = 2.83 \ m[/tex]

Generally angle at which the first minimum  of the interference pattern the  light occurs  is mathematically  represented as

        [tex]\theta = sin ^{-1}[\frac{m \lambda}{d} ][/tex]

Where m which is the order of the interference is 1

substituting values

       [tex]\theta = sin ^{-1}[\frac{1 *721*10^{-9}}{ 77.7*10^{-6}} ][/tex]

      [tex]\theta = 0.5317 ^o[/tex]

 Now the width of first minimum  of the interference pattern is mathematically evaluated as

       [tex]Y = D sin \theta[/tex]

substituting values

       [tex]Y = 2.283 * sin (0.5317)[/tex]

       [tex]Y = 0.02 12 \ m[/tex]

 Now the width of  the  pattern's central maximum is mathematically evaluated as

        [tex]Z = 2 * Y[/tex]

substituting values

      [tex]Z = 2 * 0.0212[/tex]

     [tex]Z = 0.0424 \ m[/tex]

Answer:

Explanation:

Find the average value of position x, momentump, and square of the mometum p2 for the ground and first excited states of the particle-in-a-box with mass m and box length L.

Plz check attachment for answer.

Hope it's helpful

Answer:

in all cases with increasing temperature the density should decrease.

Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body,

Explanation:

Let's start for ya dream gas

        PV = nRT

Since it indicates that the pressure is constant, we see that the volume is directly proportional to the temperature.

The density of is defined by

        ρ = m / V

As we saw that volume increases with temperature, this is also true for solid materials, using linear expansion. Therefore in all cases with increasing temperature the density should decrease.

Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body, since all the radiation that falls on it is absorbed or emitted.

This type of construction has a characteristic curve where the maximum of the curve is dependent on the tempera, but independent of the material with which it is built, to explain the behavior of this curve Planck proposed that the diaconate in the cavity was not continuous but discrete whose energy is given by the relationship

             E = h f

By  the experiment "The student would have no injuries because he would know hydrochloric acid is dangerous and would be wearing gloves when using it. "

An experiment would be a technique used to confirm or deny a hypothesis, as well as assess the likelihood or effectiveness of something that has never been tried before.

Hydrochloric acid is a kind of compound in which hydrogen and chlorine element is present.

Maintain a safe distance between your hands and your body, mouth, eyes, as well as a face when utilizing lab supplies and chemicals.

By  the experiment "By  the experiment "The student would have no injuries because he would know hydrochloric acid is dangerous and would be wearing gloves when using it. "

To know more about experiment and hydrochloric acid

https://brainly.com/question/13770820

#SPJ3

Answer:

The speed of the arrow after passing through the target is 30.1 meters per second.

Explanation:

The situation can be modelled by means of the Principle of Linear Momentum, let suppose that the arrow and the target are moving on the same axis, where the velocity of the first one is parallel to the velocity of the second one. The Linear Momentum model is presented below:

[tex]m_{a}\cdot v_{a,o} + m_{t}\cdot v_{t,o} = m_{a}\cdot v_{a,f} + m_{t}\cdot v_{t,f}[/tex]

Where:

[tex]m_{a}[/tex], [tex]m_{t}[/tex] - Masses of arrow and target, measured in kilograms.

[tex]v_{a,o}[/tex], [tex]v_{a,f}[/tex] - Initial and final speeds of the arrow, measured in meters per second.

[tex]v_{t,o}[/tex], [tex]v_{t,f}[/tex] - Initial and final speeds of the target, measured in meters per second.

The final speed of the arrow is now cleared:

[tex]m_{a} \cdot v_{a,f} = m_{a} \cdot v_{a,o} + m_{t}\cdot (v_{t,o}-v_{t,f})[/tex]

[tex]v_{a,f} = v_{a,o} + \frac{m_{t}}{m_{a}} \cdot (v_{t,o}-v_{t,f})[/tex]

If [tex]v_{a,o} = 2.1\,\frac{m}{s}[/tex], [tex]m_{t} = 0.3\,kg[/tex], [tex]m_{a} = 0.0225\,kg[/tex], [tex]v_{t,o} = 2.10\,\frac{m}{s}[/tex] and [tex]v_{t,f} = 0\,\frac{m}{s}[/tex], the speed of the arrow after passing through the target is:

[tex]v_{a,f} = 2.1\,\frac{m}{s} + \frac{0.3\,kg}{0.0225\,kg}\cdot (2.10\,\frac{m}{s} - 0\,\frac{m}{s} )[/tex]

[tex]v_{a,f} = 30.1\,\frac{m}{s}[/tex]

The speed of the arrow after passing through the target is 30.1 meters per second.

Answer:

Explanation:

check this out and rate me

Answer:

producers make its own energy frominorganic substances.

Yes it does !  The so-called "boiling point" is the temperature at which Bromine liquid can change state and become Bromine vapor, if enough additional thermal energy is provided.  The boiling point is higher than room temperature.

Answer:

nvbnncbmkghbbbvvvvvvbvbhgggghhhhb

Explanation:

The collision forces are equal and opposite.  Therefore, the magnitudes are equal.