Answers
Answer:
See the explanation
Explanation:
In this case, we have to remember that in the monochlorination products we only have to add one "Cl" with this in mind, we can have several options.
a) 1-chloro-2,2-dimethylbutane
b) (R)-3-chloro-2,2-dimethylbutane
c) (S)-3-chloro-2,2-dimethylbutane
d) 1-chloro-3,3-dimethylbutane
Additionally, from these 4 molecules, we will have 2 enantiomers. (R)-3-chloro-2,2-dimethylbutane and (S)-3-chloro-2,2-dimethylbutane.
See figure 1
I hope it helps!
There four distinct monochlorinated products and two of them contain an asymmetric carbon atom.
Free radicals refers to chemical species that posses an odd number of electrons. An asymmetric carbon atom is a carbon atom that is bonded to four different groups.
When 2,2-dimethylbutane is subjected to free-radical chlorination, four distinct monochlorinated products are possible and two of these contain asymmetric carbon atoms.
The four distinct monochlorinated products are;
1-chloro-2,2-dimethylbutane (R)-3-chloro-2,2-dimethylbutane (S)-3-chloro-2,2-dimethylbutane 1-chloro-3,3-dimethylbutane
Learn more: https://brainly.com/question/9743981
Related Questions
all compounds are neutral true or false
Answers
Answer:
Even all compounds are neutral.
Explanation:
Some of them exhibit polarity. Because of the difference in electron affinity of the constituent atoms, the shared electrons are pulled towards the atom with high affinity to electrons.
Tubes through which water flows as it is brought from 0.8 MPa, 150C to 240C at essentially constant pressure in the boiler of a power plant. The total mass flow rate of the water is 100 kg/s. Combustion gases passing over the tubes cool from 1067 to 547C at essentially constant pressure. The combustion gases can be modeled as air as an ideal gas. There is no significant heat transfer from the boiler to its surroundings. Surrounding (dead state) temperature and pressure are given as 25C and 1 atm, respectively. Determine i) the exergetic efficiency of the boiler ii) rate of exergy destruction as kW iii) mass flow rate of the combustion gases as kg/s
Answers
Answer:
The correct answer is i) 50.2 % ii) 13440.906 kW and iii) 71.986 kg/s.
Explanation:
In order to find the mass flow rate of the combustion of gases, there is a need to use the energy balance equation:
Mass of water × specific heat of water (T2 -T1)w = mass of gas × specific heat of gas (T2-T1)g
100 × 4.18 × [(240 + 273) - (150 + 273)] = mass of gas × 1.005 × [(1067+273) - (547+273)]
Mass of gas = 71.986 kg/s
The entropy generation of water can be determined by using the formula,
(ΔS)w = mass of water × specific heat of water ln(T2/T1)w
= 100 × 4.18 ln(513/423)
= 80.6337 kW/K
Similarly the entropy generation of water will be,
(ΔS)g = mass of gas × specific heat of gas ln(T2/T1)g
= 71.986 × 1.005 ln (820/1340)
= -35.53 kW/K
The rate of energy destruction will be,
Rate of energy destruction = To (ΔS)gen
= T₀ [(ΔS)w + (ΔS)g]
= (25+273) [80.6337-53.53)
Rate of energy destruction = 13440.906 kW
The availability of water will be calculated as,
= mass of water (specific heat of water) [(T₁-T₂) -T₀ ln T₁/T₂]
= 100 × 4.8 [(513-423) - 298 ln 513/423]
= 13591.1477 kW
The availability of gas will be calculated as,
= mass of gas (specific heat of gas) [(T₁-T₂) - T₀ ln T₁/T₂]
= 71.986 × 1.005 × [(1340-820) - 298 ln 1340/820]
= 27031.7728 kW
The exergetic efficiency can be calculated as,
= Gain of availability / loss of availability
= 13591.1477/27031.7728
= 0.502
The exergetic efficiency is 50.2%.
The lock-and-key model and the induced-fit model are two models of enzyme action explaining both the specificity and the catalytic activity of enzymes. Following are several statements concerning enzyme and substrate interaction. Indicate whether each statement is part of the lock-and-key model, the induced-fit model, or is common to both models.
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate.
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex.
c. Enzyme active site has a rigid structure complementary
d. Substrate binds to the enzyme through noncovalent interactions
Answers
Answer:
The lock-and-key model:
c. Enzyme active site has a rigid structure complementary
The induced-fit model:
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate.
Common to both The lock-and-key model and The induced-fit model:
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex.
d. Substrate binds to the enzyme through non-covalent interactions
Explanation:
Generally, the catalytic power of enzymes are due to transient covalent bonds formed between an enzyme's catalytic functional group and a substrate as well as non-covalent interactions between substrate and enzyme which lowers the activation energy of the reaction. This applies to both the lock-and-key model as well as induced-fit mode of enzyme catalysis.
The lock and key model of enzyme catalysis and specificity proposes that enzymes are structurally complementary to their substrates such that they fit like a lock and key. This complementary nature of the enzyme and its substrates ensures that only a substrate that is complementary to the enzyme's active site can bind to it for catalysis to proceed. this is known as the specificity of an enzyme to a particular substrate.
The induced-fit mode proposes that binding of substrate to the active site of an enzyme induces conformational changes in the enzyme which better positions various functional groups on the enzyme into the proper position to catalyse the reaction.
1. Determine whether the following hydroxide ion concentrations ([OH−]) correspond to acidic, basic, or neutral solutions by estimating their corresponding hydronium ion concentrations ([H3O+] using the ion product constant of water (Kw).
Kw = [H3O+][OH−] = [1×10−7 M][1×10−7 M] = 1×10−14 M
Hydronium ion concentration [H3O+] Solution condition
Greater than 1×10−7 M Acidic
Equal to 1×10−7 M Neutral
Less than 1×10−7 M Basic
Drag the appropriate items to their respective bins.
1. [OH−] = 6×10−12 M
2. [OH−] = 9×10−9 M
3. [OH−] = 8×10−10 M
4. [OH−] = 7×10−13 M
5. [OH−] = 2×10−2 M
6. [OH−] = 9×10−4 M
7. [OH−] = 5×10−5 M
8. [OH−] = 1×10−7 M
A. Acidic
B. Neutral
C. Basic
2. A solution has [H3O+] = 5.2×10−5M . Use the ion product constant of water
Kw=[H3O+][OH−]
to find the [OH−] of the solution.
3. A solution has [OH−] = 2.7×10−2M . Use the ion product constant of water
Kw=[H3O+][OH−]
to find the [H3O+] of the solution.
Answers
Answer:
Question 1.
1. [OH−] = 6×10−12 M is less than 1 * 10⁻⁷, therefore is acidic.
2. [OH−] = 9×10−9 M is less than 1 * 10⁻⁷, therefore is acidic.
3. [OH−] = 8×10−10 M is less than 1 * 10⁻⁷, therefore is acidic.
4. [OH−] = 7×10−13 M is less than 1 * 10⁻⁷, therefore is acidic.
5. [OH−] = 2×10−2 M is greater than 1 * 10⁻⁷, therefore is basic.
6. [OH−] = 9×10−4 M is greater than 1 * 10⁻⁷, therefore is basic.
7. [OH−] = 5×10−5 M is greater than 1 * 10⁻⁷, therefore is basic.
8. [OH−] = 1×10−7 M is equal to 1 * 10⁻⁷, therefore is neutral
Question 2:
[OH⁻] = 1.92 * 10⁻⁸ M
Question 3:
[H₃O⁺] = 3.70 * 10⁻¹¹ M
Explanation:
The ion product constant of water Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M² is a constant which gives the product of the concentrations of hydronium and hydroxide ions of dissociated pure water. The concentrations of the two ions are both equal to 1 * 10⁻⁷ in pure water.
A solution that has [OH⁻] greater than 1 * 10⁻⁷ is basic while one with [OH⁻] less than 1 * 10⁻⁷ is acidic.
1. [OH−] = 6×10−12 M is less than 1 * 10⁻⁷, therefore is acidic.
2. [OH−] = 9×10−9 M is less than 1 * 10⁻⁷, therefore is acidic.
3. [OH−] = 8×10−10 M is less than 1 * 10⁻⁷, therefore is acidic.
4. [OH−] = 7×10−13 M is less than 1 * 10⁻⁷, therefore is acidic.
5. [OH−] = 2×10−2 M is greater than 1 * 10⁻⁷, therefore is basic.
6. [OH−] = 9×10−4 M is greater than 1 * 10⁻⁷, therefore is basic.
7. [OH−] = 5×10−5 M is greater than 1 * 10⁻⁷, therefore is basic.
8. [OH−] = 1×10−7 M is equal to 1 * 10⁻⁷, therefore is neutral
Question 2:
Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[OH⁻] = 1 * 10⁻¹⁴ M²/ [H₃O⁺]
[OH⁻] = 1 * 10⁻¹⁴ M²/5.2*10⁻⁵ M
[OH⁻] = 1.92 * 10⁻⁸ M
Question 3:
Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[H₃O⁺][OH⁻] = 1 * 10⁻¹⁴
[H₃O⁺] = 1 * 10⁻¹⁴ M²/ [OH⁻]
[H₃O⁺] = 1 * 10⁻¹⁴ M²/ 2.7 * 10⁻² M
[H₃O⁺] = 3.70 * 10⁻¹¹ M
The amount of calcium in a 15.0-g sample was determined by converting the calcium to calcium oxalate, CaC2O4. The CaC2O4 weighed 40.3 g. What is the percent of calcium in the original sample
Answers
Answer:
128 gram of CaC2O4 contains 40 gram of Calcium
40.3 gram of CaC2O4 cotnains = 40*40.3/128 = 12.59 gram of Calcium
out of 15 gram 12.59 gram is Calcaim that means around 50% of orginal sample has Calcium
A sample of chlorine gas starting at 686 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 507.6 mL. What was the initial volume of the chlorine gas container if the process was performed at constant temperature
Answers
Answer:
The initial volume of the chlorine gas [tex]V1=733.28mL[/tex]
Explanation:
Given:
P1= 686mmHg
P2= 991mmHg
V2= 5076mL
V1=?
According to Boyle's law which states that at a constant temperature, the pressure on a gas increases as it's volume decreases.
It can be expressed as : P1V1 = P2V2
Where P1 is the initial pressure
P2= final pressure
V1= initial volume
V2 = final volume
[tex]V1= (P2V2)/P1[/tex]
V1= (991mmHg*507.6mL)/686mmHg
V1=503031.6/686
[tex]V1=733.28mL[/tex]
Therefore, The initial volume of the chlorine gas [tex]V1=733.28mL[/tex]
The partial Lewis structure that follows is for a hydrocarbon molecule. In the full Lewis structure, each carbon atom satisfies the octet rule, and there are no unshared electron pairs in the molecule. The carbon-carbon bonds are labeled 1, 2, and 3.
A) How many hydrogen atoms are in the molecule?
B) Rank the carbon-carbon bonds in order of increasing bond length.
C) Which carbon-carbon bond is the strongest one?
Answers
Answer:
A) How many hydrogen atoms are in the molecule?
In the presence of a strong base, the following reaction between (CH3)3CCl and OH- occurs: (CH3)3CCl + OH- → (CH3)3COH + Cl- Studies have suggested that the mechanism for the reaction takes place in 2 steps: Step 1) (CH3)3CCl → (CH3)3C+ + Cl- (slow) Step 2) (CH3)3C+ + OH- → (CH3)3COH (fast) What is the rate law expression for the overall reaction? Group of answer choices
Answers
Answer:
D. rate = k [(CH3)3CCl]
Explanation:
(CH3)3CCl + OH- → (CH3)3COH + Cl-
The mechanisms are;
Step 1)
(CH3)3CCl → (CH3)3C+ + Cl- (slow)
Step 2)
(CH3)3C+ + OH- → (CH3)3COH (fast)
In kinetics, the slowest step is the ratee determining step.
For a given reaction;
A → B + C, the rate law expression is given as;
rate = k [A]
In this problem, from step 1. The rate expression is;
rate = k [(CH3)3CCl]
When 1-iodo-1-methylcyclohexane is treated with NaOCH2CH3 as the base, the more highly substituted alkene product predominates. When KOC(CH3)3 is used as the base, the less highly substituted alkene predominates. Give the structures of the two products and offer an explanation.
Answers
Answer:
See explanation
Explanation:
In this case, we have 2 types of reactions. [tex]CH_3CH_2ONa[/tex] is a strong base but only has 2 carbons therefore we will have less steric hindrance in this base. So, the base can remove hydrogens that are bonded on carbons 1 or 6, therefore, we will have a more substituted alkene (1-methylcyclohex-1-ene).
For the [tex]KOC(CH_3)_3[/tex] we have more steric hindrance. So, we can remove only the hydrogens from carbon 7 and we will produce a less substituted alkene (methylenecyclohexane).
See figure 1
I hope it helps!
The reason for the dramatic decline in the number of measles cases from the 1960s to 2010 in the United States was because the vaccine
Answers
Answer:
It was because the vaccine generated actively acquired immunity, that is, inoculation of a portion of the measles virus so that the body forms the antibodies for a second contact and thus can destroy it without triggering the pathology.
Explanation:
Vaccines are methods of active acquired immunity since the antibody is not passively inoculated, it is manufactured by the body with a physiological process once part of the virus is inoculated.
The measles virus most of all affected the lives of infants or newborn children with severe rashes and high fevers that led to death.
Cl2 + F2 → ClF3, 5. How many moles of Cl2 are needed to react with 3.44 moles of F2? 6. How many grams of ClF3 form when 0.204 moles of F2 react with excess Cl2? 7. How many grams of ClF3 form from 130.0 grams of Cl2 when F2 is in excess? 8. How many grams of F2 are needed to react with 3.50 grams of Cl2?
Answers
Answer:
5) 1.147 moles Cl2
6) 12.57 grams ClF3
7) 339.10 grams ClF3
8) 5.63 grams F2
Explanation:
Step 1: Data given
Number of moles F2 = 3.44 moles
Molar mass F2 = 38.00 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles F2
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 3.44 moles F2 we'll need 3.44/3 = 1.147 moles Cl2
Step 1: Data given
Number of moles F2 = 0.204 moles
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles ClF3
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 0.204 moles F2 we'll have 2/3 * 0.204 = 0.136 moles
Step 4: Calculate mass ClF3
Mass ClF3 = Moles ClF3 * molar mass ClF3
Mass ClF3 = 0.136 moles * 92.448 g/mol
Mass ClF3 = 12.57 grams ClF3
Step 1: Data given
Mass of Cl2 = 130.0 grams
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles Cl2
Moles Cl2 = mass Cl2 / molar mass Cl2
Moles Cl2 = 130.0 grams / 70.9 g/mol
Moles Cl2 = 1.834 moles
Step 4: Calculate moles
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 1.834 moles Cl2 e'll have 2*1.834 = 3.668 moles ClF3
Step 5: Calculate mass ClF3
Mass ClF3 = Moles ClF3 * molar mass ClF3
Mass ClF3 = 3.668 moles * 92.448 g/mol
Mass ClF3 = 339.10 grams ClF3
Step 1: Data given
Mass of Cl2 = 3.50 grams
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles Cl2
Moles Cl2 = Mass Cl2 / molar mass Cl2
Moles Cl2 = 3.50 grams / 70.9 g/mol
Moles Cl2 = 0.0494 moles
Step 4: Calculate moles F2
For 1 mol Cl2 we need 3 moles F2
For 0.0494 moles we need 3*0.0494 = 0.1482 moles
Step 5: Calculate mass F2
Mass F2 = moles F2 * molar mass F2
Mass F2 = 0.1482 moles * 38.00 g/mol
Mass F2 = 5.63 grams F2
When an automobile engine starts, the metal parts immediately begin to absorb heat released during the combustion of gasoline. How much heat will be absorbed by a 165 kg iron engine block as the temperature rises from 15.7°C to 95.7°C? (The specific heat of iron is 0.489 J/g·°C.)
Answers
Answer:
H = 4,034,250 J
Explanation:
Mass, m = 165kg = 165,000g (Converting to grams)
Initial temperature = 15.7°C
Final temperature = 95.7°C
Temperature change, ΔT = 95.7 - 15.7 = 50°C
Specific heat capacity, c = 0.489 J/g·°C
Heat = ?
All the parameters are related with the equation below;
H = m * c * ΔT
H = 165000 * 0.489 * 50
H = 4,034,250 J
What is an ion?
A. An atom that has lost or gained 1 or more electrons
O B. An atom that has lost or gained 1 or more neutrons
O C. An atom that has lost or gained 1 or more protons
D. An atom that differs in mass from another atom of the same
element
Answers
Answer:
An ion is an atom that has lost or gained one or more electrons.
Explanation:
Ions are positively or negatively charged atoms of elements. This is because they can give, take, or share electrons with other elements to encourage the formation of chemical bonds.
Protons are what decide the chemical identity of the element. So, for example, if an atom has 11 protons, we know that will be a Sodium (Na) atom. A loss or gain of protons completely changes the chemical identity of the element and it will then become another element.
Electrons are what give an atom a neutral electrical charge (if that atom has the number of protons and neutrons normally described for the element - otherwise, a discrepancy or gain in neutrons is referred to as an isotope and declares that ions have nothing to do with the mass of an element).
With this information, you can realize that neutrons and protons have nothing to do with ions and you can confirm that ions are atoms that have lost or gained one or more electrons.
What is the net ionic equation of the reaction of MgSO4 with Ba(NO3)2 ?
Answers
Answer:
Ba(+2)(aq) + SO4(-2)(aq) -----> BaSO4(s)
Explanation:
Take a look at the attachment below;
A certain mass of carbon reacts with 9.53 g of oxygen to form carbon monoxide. ________ grams of oxygen would react with that same mass of carbon to form carbon dioxide, according to the law of multiple proportions.
Answers
Answer: 9.53 *2= 19.06
Explanation:
The law of multiple proportions states that if two elements combines to form more than one compound the ratio of masses of the second element which combines to the fixed mass of the first element will always be the ratios of the small whole numbers.
in case of carbon monoxide, mass of carbon will be the same of mass of oxygen.
But in case of carbon dioxide, if carbon is 9.53 units then oxygen will be twice as that of carbon.
CO2, so 9.53*2= 19.06 grams of oxygen will combine with 9.53 grams of carbon to form carbon dioxide.
need helpp asapp please
Answers
Answer:
B. None of these
Explanation:
Sulfur has less ionization energy than phosphorus because sulfur has a pair of electron in its 3p subshell that increases electron repulsion in sulfur and sulfur electrons can easily remove from its sub-level.
While, there are no electron pairs in 3p subshell of phosphorus, therefore it requires more energy to remove an electron from 3p subshell.
Hence, the reason is electron repulsion and the correct answer is B.
What is the coefficient for oxygen in the balanced equation? C 5H 12 + ? O2 → ? CO2 + ? H2O. 2 4 5 6 8
Answers
Answer:
8
Explanation:
When you balance the entire equation, you should get:
C5H12 + 8O2 ---> 5CO2 + 6H2O
In the diagram below, particles of the substance are moving from the liquid phase to the gas phase at the same rate as they move from the gas phase to the liquid phase. A number of balls are loosely packed in the bottom of a container, beneath a line across the middle of the container, and a few balls above the line. 2 balls below the line have arrows pointing upward through the centerline; a few of the balls above the line have arrows pointing down through the centerline. The gas and liquid are at equilibrium. a high vapor pressure. a low vapor pressure. zero vapor pressure.
Answers
Answer:
The gas and liquid is in equilibrium.
Explanation:
liquids within a container undergoes state change, changing into gas. If this container is left open, these gases will escape into the external environment. In a situation in which the container is closed, the molecules that leave the liquid surface as gas will eventually condense on contact with the cover wall and change back into the liquid state. Some of these gases will reenter the liquid surface. At first, more of the liquid is transformed into gas and escape into the space above the liquid surface. Eventually, the available space becomes saturated with vapor, and then some of the gases start entering the liquid phase at the same rate as the liquid enters the gas phase. At this stage, the gas and liquid phase now exists in equilibrium.
can a kind human being help me with this table at least only with the first burning fire wood someone please
Answers
Answer:
See below
Explanation:
* Burning fire wood is given to be our first option. Now burning tends to be a property of wood, and it does effect the chemical compositions of it. Wood, in the presence of fire / oxygen, turns into ash and carbon dioxide.
* Decomposition is recognized as a chemical change, and heating copper carbonate is a perfect example of decomposition. When energy is added to this chemical process, the copper carbonate decomposes into copper oxide.
* Mixing sodium chloride solution and silver nitrate solution. When this reaction takes place, a white precipitate of AgCl is formed. And of course, this is a chemical reaction.
* When acids or bases come in contact with citric acid, the pH degree changes much. Due to this, carbon dioxide bubbles are formed.
* When eggs are fried they absorb the heat in the pan. Doing so the egg starts to curl a bit, resulting in the formation of new particles.
_______________________________________________________
I hope this gave you a start!
Consider the insoluble compound nickel(II) hydroxide , Ni(OH)2 . The nickel ion also forms a complex with cyanide ions . Write a balanced net ionic equation to show why the solubility of Ni(OH)2 (s) increases in the presence of cyanide ions and calculate the equilibrium constant for this reaction. For Ni(CN)42- , Kf = 1.0×1031 . Use the pull-down boxes to specify states such as (aq) or (s).
Answers
Answer: Equilibrium constant for this reaction is [tex]2.8 \times 10^{15}[/tex].
Explanation:
Chemical reaction equation for the formation of nickel cyanide complex is as follows.
[tex]Ni(OH)_{2}(s) + 4CN^{-}(aq) \rightleftharpoons [Ni(CN)_{4}^{2-}](aq) + 2OH^{-}(aq)[/tex]
We know that,
K = [tex]K_{f} \times K_{sp}[/tex]
We are given that, [tex]K_{f} = 1.0 \times 10^{31}[/tex]
and, [tex]K_{sp} = 2.8 \times 10^{-16}[/tex]
Hence, we will calculate the value of K as follows.
K = [tex]K_{f} \times K_{sp}[/tex]
K = [tex](1.0 \times 10^{31}) \times (2.8 \times 10^{-16})[/tex]
= [tex]2.8 \times 10^{15}[/tex]
Thus, we can conclude that equilibrium constant for this reaction is [tex]2.8 \times 10^{15}[/tex].
what type of matter is toluene
Answers
Answer:
is an organic chemical conpond
Benny Beaver wants to determine what dyesare present in his favorite sports drink. He analyzesa sample witha UV-visiblespectrophotometer and sees absorbance peaks at 415.2nm and 519.6nm. What colordyesare present in his drink
Answers
Answer:
At 415.2nm and 519.6nm, the dyes observed by the instrument are violet and green respectively.
Explanation:
In the electromagentic spectrum, visible wavelengths cover a range from approximately 400 to 800 nm. The colours of the spectrum range from red to violet (Red, Orange, Yellow, Green, Blue, Indigo and violet: a.k.a ROGBIV), in order of decreasing wavelength.
I hope this explanation would suffice.
A solid is dissolved in a liquid, and over time a solid forms again. How can
you confirm the type of change that took place?
A. Testing the new solid to show that its properties are the same as
the starting solid would confirm that a physical change took
place.
B. The solid dissolving in a liquid is confirmation that a chemical
change took place.
C. The solid forming from the liquid is confirmation that a physical
change took place.
D. Showing that the total mass of the solid and liquid changed would
confirm that a chemical change took place.
Answers
an auto of an element has 17 protons in its nucleus.a) write the electronic configuration of the atom.b)to what period and group does the element belong
Answers
Answer:
i hope it will help you
Explanation:
electronic configuration 1s²,2s,²2p^6,3s²3p^6,4s^1
as it has one electron in its valence shell so it is the member of group 1A(ALKALI METALS) and the number of shells is 4 so it is in period 4
A certain lightbulb containing argon at 1.20 atm and 18°C is
heated to 85°C at constant volume. Calculate its final pressure
(in atm).
Answers
Answer:
certain lightbulb containing argon at 1.20 atm and 18 0 C is heated to 85 0 C at constant volume. What is the final pressure of argon in the lightbulb (in atm)? P 1 T 1 P 2 T 2 ... Ideal Gas Equation 5.4 Charles' law: V T (at constant n and P ) ... Consider a case in which two gases, A and B , are in a container of volume V.
Explanation:
A weather balloon is inflated to a volume of 27.6 L at a pressure of 755 mmHg and a temperature of 29.9 ∘C. The balloon rises in the atmosphere to an altitude where the pressure is 385 mmHg and the temperature is -14.1 ∘C. Assuming the balloon can freely expand, calculate the volume of the balloon at this altitude.
Answers
Answer: The volume of the balloon at this altitude is 46.3 L
Explanation:
Combined gas law is the combination of Boyle's law, Charles's law and Gay-Lussac's law
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 755 mm Hg
[tex]P_2[/tex] = final pressure of gas (at STP) = 385 mm Hg
[tex]V_1[/tex] = initial volume of gas = 27.6 L
[tex]V_2[/tex] = final volume of gas = ?
[tex]T_1[/tex] = initial temperature of gas = [tex]29.9^0C=(29.9+273)K=302.9K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]-14.1^0C=((-14.1)+273)K=258.9K[/tex]
Putting all the values we get:
[tex]\frac{755\times 27.6}{302.9}=\frac{385\times V_2}{258.9}[/tex]
[tex]V_2=46.3L[/tex]
Thus the volume of the balloon at this altitude is 46.3 L
Convert 150 K to degrees C.
Answers
Answer:
K = 150, C = - 123.15°
Explanation:
Kelvin = Celcius + 273.15 / 0 Kelvin = - 273.14 C
_____________________________________
Thus,
150 K = Celcius + 273.15,
150 - 273.15 = C,
C = -123.15 degrees
Solution, C = - 123.15°
Answer:
C=-123.15
Explanation:
This is easy
Do you think there is a limit to the size of Atoms scientist can make? prove with evidence.
Answers
Answer:
Yes, there is a limit to the size of atoms that scientists can make.
Explanation:
In the nucleus, atoms contain protons and neutrons. It is known that as the number of protons in the nucleus increases, the atom becomes unstable due to the repulsion of positively charged protons clumped together in the small space of the nucleus.
However, an attractive force exists between neutrons and protons which binds the nucleus together and minimizes repulsion between protons. Even neutrons have recently been found to slightly repel each other.
Several attempts made at synthesizing many very heavy elements lately have proved abortive because the elements only exist for a few fractions of a second owing to large repulsion between the particles in the nucleus.
This goes a long way to show that there is a limit to the number of protons and neutrons that can be assembled together to form a new nucleus. We cannot bring an unlimited number of nucleons together to form new atoms due to inter particle repulsive forces.
artaric acid, H2C4H4O6, has two acidic hydrogens. The acid is often present in wines and precipitates from solution as the wine ages. A solution containing an unknown concentration of the acid is titrated with NaOH. It requires 21.65 mL of 0.3500 M NaOH solution to titrate both acidic protons in 50.00 mL of the tartaric acid solution. You may want to reference (Pages 149 - 153) Section 4.6 while completing this problem. Part A Write a balanced net ionic equation for the neutralization reaction. Express your answer as a chemical equation including phases.
Answers
Answer:
2H⁺(aq) + + 2OH⁻(aq) → 2H₂O(l)
Explanation:
A acid that has two acidic hydrogens requires to moles of NaOH per mole of acid producing the salt of the acid and water.
If the acid is tartaric acid, H₂C₄H₄O₆, the reaction with NaOH is:
H₂C₄H₄O₆(aq) + 2NaOH(aq) → 2H₂O(l) + 2NaC₄H₄O₆(aq)
Now, ions in solution in the reaction are:
2H⁺(aq) + C₄H₄O₆²⁻(aq) + 2Na⁺(aq) + 2OH⁻(aq) → 2H₂O(l) + 2Na⁺(aq) +C₄H₄O₆²⁻(aq)
Thus, net ionic equation (Lisiting only the ions involved in the reaction) is:
2H⁺(aq) + + 2OH⁻(aq) → 2H₂O(l)When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are:
sulfur dioxide (g) + water (l) __________sulfurous acid (H2SO3) (g) + water (I)
Answers
Answer:
Sulfur dioxide + 2 ( water ) -----> sulfurous acid + water /
SO2 + 2 ( H2O ) -----> H2SO3 + H2O
Explanation:
This formula may not be right. Sulfur dioxide tends to react with water to produce sulfurous acid as per it's formula, but then again that chemical reaction need not be balanced. However, I will solve for either case here -
Sulfur dioxide + water -----> sulfurous acid,
Sulfur dioxide + water -----> sulfurous acid + water
_______________________________________________________
As I mentioned before, Sulfur dioxide + water -----> sulfurous acid is a chemical reaction that need not balancing as the number of each element present on the reactant and product side are the same. To help, let me rewrite this reaction -
SO2 + H2O -----> H2SO3,
Reactant | Product
Sulfur = 1, Sulfur = 1,
Oxygen = 3, Oxygen = 3,
Hydrogen = 2 Hydrogen = 2
And hence the equation is already balanced. Now let us consider the case we supposedly have at hand - Sulfur dioxide + water -----> sulfurous acid + water. Take a look at the attachment below;