Answer:
[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]
Explanation:
Hello there!
In this case, for these equilibrium problems it is firstly necessary to know the balanced reaction at equilibrium:
H2((g) + I2(g) ⇋ 2HI(g)
Next, by means of the law of mass action, it turns out possible for us to write the required and correct expression for the equilibrium constant by considering the concentrations and the coefficients in the aforementioned reaction:
[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]
Best regards!
A 1.om sample of dry air at
at 25°c at 786mmHg contains 0.925g Nitrogen Plus other gases including oxygen, argon and carbon dioxide. what is the partial pressure of Na with the air sample.
Answer:
Is the question not supposed to be what is the partial pressure of Nitrogen not Sodium
A sample of chlorine gas has a volume of 0.30 L at 273 K and 1 atm pressure. What temperature (in ∘C) would be required to increase the volume to 1.0 L ?
Answer:
[tex]T_2=637\°C[/tex]
Explanation:
Hello there!
In this case, considering this problem as pressure constant, since the change is exhibited in temperature and volume only, it is possible for us to use the Charles' law as shown below:
[tex]\frac{V_2}{T_2}=\frac{V_1}{T_1}[/tex]
Thus, by solving for the final temperature, we obtain:
[tex]T_2=\frac{T_1V_2}{V_1}\\\\T_2=\frac{273K*1L}{0.30L}\\\\T_2=910K-273\\\\T_2=637\°C[/tex]
Best regards!
A compound is found to contain 37.32 % phosphorus , 16.88 % nitrogen , and 45.79 % fluorine by
mass.
Question 1: The empirical formula for this compound is :
Question 2: The molar mass for this compound is 82.98 g/mol.
The Molecular formula for this compound is:
Answer: 1. The empirical formula is [tex]PNF_2[/tex]
2. The molecular formula is [tex]PNF_2[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of P = 37.32 g
Mass of N = 16.88 g
Mass of F = 45.79 g
Step 1 : convert given masses into moles.
Moles of P =[tex]\frac{\text{ given mass of P}}{\text{ molar mass of P}}= \frac{37.32g}{31g/mole}=1.20moles[/tex]
Moles of N =[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{16.88g}{14g/mole}=1.20moles[/tex]
Moles of F =[tex]\frac{\text{ given mass of F}}{\text{ molar mass of F}}= \frac{45.79g}{19g/mole}=2.41moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For P = [tex]\frac{1.20}{1.20}=1[/tex]
For N = [tex]\frac{1.20}{1.20}=1[/tex]
For F =[tex]\frac{2.41}{1.20}=2[/tex]
The ratio of P: N: F= 1: 1: 2
Hence the empirical formula is [tex]PNF_2[/tex]
The empirical weight of [tex]PNF_2[/tex]= 1(31)+1(14)+2(19)= 82.98 g.
The molecular weight = 82.98 g/mole
Now we have to calculate the molecular formula.
[tex]n=\frac{\text{Molecular weight}}{\text{Equivalent weight}}=\frac{82.98}{82.98}=1[/tex]
The molecular formula will be=[tex]1\times PNF_2=PNF_2[/tex]
What is the value of the equilibrium constant K ?
Answer:
K = 0.0209
Explanation:
K = [tex]\frac{[H_{2}][I_{2}]}{[2HI]^{2}}[/tex]
K = [tex]\frac{[4.35 x 10^{-2} ][2.79 x 10^{-2} ]}{[0.241]^{2} }[/tex]
K = 0.0208958
K = 0.0209
g At elevated temperatures, molecular hydrogen and molecular bromine react to partially form hydrogen bromide: H 2 (g) Br 2 (g) 2HBr (g) A mixture of 0.682 mol of H 2 and 0.440 mol of Br 2 is combined in a reaction vessel with a volume of 2.00 L. At equilibrium at 700 K, there are 0.516 mol of H 2 present. At equilibrium, there are ________ mol of Br 2 present in the reaction vessel.
Answer: At equilibrium , there are 0.274 moles of [tex]Br_2[/tex]
Explanation:
Moles of [tex]H_2[/tex] = 0.682 mole
Moles of [tex]Br_2[/tex] = 0.440 mole
Volume of solution = 2.00 L
Initial concentration of [tex]H_2[/tex] = [tex]\frac{0.682}{2.00}=0.341 M[/tex]
Initial concentration of [tex]Br_2[/tex] = [tex]\frac{0.440}{2.00}=0.220 M[/tex]
Equilibrium concentration of [tex]H_2[/tex] = [tex]\frac{0.516}{2.00}=0.258 M[/tex]
The given balanced equilibrium reaction is,
[tex]H_2(g)+Br_2(g)\rightleftharpoons 2HBr(g)[/tex]
Initial conc. 0.341 M 0.220 M 0 M
At eqm. conc. (0.341-x) M (0.220-x) M (2x) M
Given : (0.341-x) M = 0.258 M
x= 0.083 M
Thus equilibrium concentartion of [tex]Br_2[/tex] = (0.220-0.083) M = 0.137 M
Thus moles of [tex]Br_2[/tex] at equilibrium = [tex]0.137M\times 2.00L=0.274mol[/tex]
At equilibrium , there are 0.274 moles of [tex]Br_2[/tex]
how many ions does magnesium phosphite have? how many of those are anions? please explain thought process.
Answer:
We can simply refer to the cation in the ionic compound as magnesium. Phosphorus, Pstart text, P, end text, is a group 15 element and therefore forms 3- anions.
Explanation:
Because it is an anion, we add the suffix -ide to its name to get phosphide as the name of the ion.
Use the following Balanced Equation to complete the question: 2 Al + 6 HBr → 2 AlBr3 + 3 H2
If you have 10 moles of Al how many moles of H2 can be produced?
*Will give Brainly!*
Calculate the moles of argon gas at STP in 33 L. Round answer to 2 significant figures.
Answer:
1.5 mol
Explanation:
Step 1: Given data
Volume of argon gas: 33 LStandard temperature: 273.15 KStandard pressure: 1 atmStep 2: Calculate the moles corresponding to 33 L of argon at standard temperature and pressure (STP)
At STP, 1 mole of argon gas occupies 22.4 L.
33 L × 1 mol/22.4 L = 1.5 mol
Titrations provide a method of quantitatively measuring the concentration of an unknown solution.
a. Trueb. False
Answer: True
Explanation:
Titration is a quantitative technique where a solution of known concentration is used to determine the concentration of an unknown solution. The titrant (the known solution) is added from a burette to a known quantity of the the unknown solution until the reaction is complete.
By knowing the volume of titrant, we can determine the concentration of the unknown.
Thus the statement Titrations provide a method of quantitatively measuring the concentration of an unknown solution is True .
Convert 5.28 x 1019 molecules of C6H1206 to grams.
Answer:
[tex]m=0.0158g[/tex]
Explanation:
Hello there!
In this case, it is possible to comprehend these mass-particles problems by means of the concept of mole, molar mass and the Avogadro's number because one mole of any substance has 6.022x10²³ particles and have a mass equal to the molar mass.
In such a way, for C₆H₁₂O₆, whose molar mass is about 180.16 g/mol, the referred mass would be:
[tex]m=5.28x10^{19}molecules*\frac{1mol}{6.022x10^{23}molecules}*\frac{180.16g}{1mol}\\\\m=0.0158g[/tex]
Best regards!
Which salt preparation uses a burette and a pipette
potassium chloride from potassium hydroxide and hydrochloric acid
gases are really _______ and molecules are full of _______, bouncing around constantly
Answer:Gases are really spread out and the atoms and molecules are full of energy - , bouncing around constantly.
Explanation:
The process of breaking a compound down into its elements is called
rearrangement
recombination
decomposition
dessication
A solution contains 1.817 mg of CoSO4 (155.0 grams/mole) per mL. Calculate the volume (in mL) of 0.009795 M Zn2 needed to titrate the excess complexing reagent after the addition of 70.00 mL of 0.009005 M EDTA to a 20.00 mL aliquot of the Co2 solution.
Answer:
85.952 ml [tex]Zn^2^+[/tex] needed to titrate the excess complexing reagent .
Explanation:
Lets calculate
After addition of 80 ml of EDTA the solution becomes = 20 + 70 = 90 ml
As the number of moles of [tex]CoSO_4[/tex] =[tex]\frac{Given mass }{molar mass}[/tex]
=[tex]\frac{1.817}{155}[/tex]
=0.01172
Molarity = [tex]\frac{no. of moles}{volume of solution}[/tex]
=[tex]\frac{0.01172}{20}[/tex]
=0.000586 moles
Excess of EDTA = concentration of EDTA - concentration of CoSO4
= 0.009005 - 0.000586
= 0.008419 M
As M1V1 ( Excess of EDTA ) = M2V2 [tex](Zn^2^+)[/tex]
[tex]0.008419\times100ml=0.009795\times V2[/tex]
[tex]V2=\frac{0.008419\times100}{0.009795}[/tex]
V2 =85.952 ml
Therefore , 85.952 ml [tex]Zn^2^+[/tex] needed to titrate the excess complexing reagent .
why is space cold ???
Because the space is ultimate thermos.
Hydrogen chloride dissolved in water yields hydrochloric acid. What is the
molar concentration of HCl if 3.65 g of hydrogen chloride is dissolved in 500 mL of
water?
Answer:
1500ml
Explanation:
molarity=3.65⋅g36.5⋅g⋅mol−1500⋅mL×10−3⋅L⋅mL−1=0.200⋅mol⋅L−1
Atoms in the same GROUP have the same...
A . Size
B. Temperature
C. Number of energy levels
D. Reactivity
Answer:
reactivity
Explanation:
for example atoms in group 7 react by gaining 1 electron to become stable but they do not have the same number of energy levels
Suppose that scientists want to study a feature of the galaxy that is very far away. They decide to use a telescope that observes high-energy gamma rays. Explain why this would be a good choice.
Answer & Explanation:
Gamma rays are the most energetic form of electromagnetic radiation. By observing the distant galaxy at gamma-rays, scientists can search for new physics, test theories, and perform experiments that are not possible in earth-bound laboratories.
Considering change of state descriptions, select the name of the change of state for when energy is absorbed. Group of answer choices sublimation freezing condensation deposition
Answer: Sublimation
Explanation:
Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.
Freezing is a process in which a liquid changes into solid phase when allowed to cool.
Condensation is a process in which a gas changes into liquid phase when allowed to cool.
Deposition is a process in which a gas deposits as solid phase when allowed to cool.
Thus change of state where energy is absorbed is sublimation.
Plzz help me well mark brainliest if you are correct
Answer:
A. non renewable energy sources cannot be used over again and renewable energy sources can be used again
Answer:
A. Nonrenewable energy sources cannot be used over again. Renewable energy sources can be used again.
Explanation:
In what industry do fertilizers and pesticides wash off and contaminate water supplies?Construction Oil Transportation Agriculture
Answer:
The answer is agriculture.
Explanation:
Answer: Agriculture
Explanation:
I got it right on my exam
What is orbit? A. An increase in centripetal motion and mass friction. B. Resistance of an object to avoid friction. C. Gravity causing a curved path as an object tries to go straight. D. How well an object floats.
Answer:
C. gravity causing a curved path as an object tries to go straight.
What's the bond between two atoms of hydrogen?
Answer:There is a iin dipole attraction between two hydrogen atom
Explanation:
The same atoms have the ion dipole attraction between them the same atoms repel each other
A student in the lab accidentally poured 45 mL of water into a graduated cylinder containing 15 mL of 3.0 M HCL. What is the concentration of the new solution?
Answer:
The correct approach is "1 M".
Explanation:
The given values are:
Volume of HCL,
V₁ = 45 ml
In prepared solution,
V₂ = 15 ml
Concentration,
C₁ = ?
C₂ = 3.0 M
As we know,
⇒ [tex]V_1C_1=V_2C_2[/tex]
or,
⇒ [tex]C_1=\frac{V_2C_2}{V_1}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{15\times 3}{45}[/tex]
⇒ [tex]=\frac{45}{45}[/tex]
⇒ [tex]=1 \ M[/tex]
When P4O10(s) reacts with H2O(l) to form H3PO4(aq) , 453 kJ of energy are evolved for each mole of P4O10(s) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.
Answer:
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
Explanation:
A thermochemical reaction is one in which the amount of heat gained/evolved is written as part of the reaction equation.
A thermochemical equation helps us to judge whether an equation is endothermic or exothermic. For an endothermic reaction, ΔH is positive while for an exothermic reaction ΔH is negative.
Since, the reaction of one mole of P4O10(s) with H2O(l) to form H3PO4(aq) evolves 453 kJ of energy for each mole of P4O10(s) that reacts. Then we can write;
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
visible light travels from place to place as a
Answer:
Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.
Explanation:
What is it called when a gas turns into a liquid
Answer:
condensation
Explanation:
The process of a gas becoming a liquid is called condensation.
☁️ Answer ☁️
Condensation
"Condensation is the name of the process through which gas turns into a liquid. Three common states of matter exist: solids, liquids and gases. Matter, however, can change its state with the addition or subtraction of energy. The energy is usually in the form of heat. "
Hope it helps.
Have a nice day noona/hyung.
__Zn+__HCI → _ZnCl2 + __H2
Answer:
1Zn+ 2HCI → 1ZnCl2 + 1H2
please help me out!! 10 points <3
Answer:it’s b
Explanation:I took. The test and got 100
Answer:
a- i know the other person said that it was b but i looked it but and it seems to be A. whoops-
Explanation:
A gas has a volume of 10 L at 200 K and a pressure of 1.5 atm . What would the volume of the gas be at 300 K and 2atm of pressure ?
Answer:
jeyjeyjetnetney
Explanation:
thmrhmrhmrum