What's the purpose of a curtain drain?

What's The Purpose Of A Curtain Drain?

Answers

Answer 1
A French drain, sometimes called a curtain drain, is a simple system with no moving parts -- gravity removes excess water from problem areas in your yard. Give gravity a chance to do its job by making sure your French drain design has the proper slope from beginning to end.
Answer 2

Answer:

A French drain, or curtain drain, removes excess surface water so you won't need hip boots to cut the grass. A French drain, sometimes called a curtain drain, is a simple system with no moving parts -- gravity removes excess water from problem areas in your yard.


Related Questions

Discuss on forced convection heat transfer with real examples.

Answers

Answer:

forced convection

Explanation:

When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.

The process of refining specification involves
O defining the initial design.
O presenting the finished product to a client.
deciding whether or not to continue with a project.
O adjusting outcomes and making pragmatic changes.

Answers

Answer:

I'm not sure but I'm pretty sure it the second one (btw I'm sorry if this didn't help) :/

Why does a
generally decrease
with increasing
bond energy?

Answers

Answer:

What is the real meaning of this questions

Answer:

what whatwhat whatwhat the town hall meeting at the office in the morning and I can get you a new one for the kids

Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.

Answers

C Torque. Hope it helps

pretty ako hjshjs ok.

Answers

Answer:

wala naman pong pic po wala kahit walang pic magan da parin

type the correct answer in the box Spell all words correctly
Damien wants to study the effect on a material's elasticity after it is submerged in water for varying durations. What type of graphical tool should
holin
Damien can stucty how the material behaves when immersed by using a
Curve

Answers

Damien can study how the material behaves when immersed by using a; Stress - Strain Curve

To determine the elasticity of a material, we need to find the elastic modulus because the elastic modulus is what quantifies the elasticity of the material.

Now, formula for elastic modulus is;

E = stress/strain

Now, to study the effect on a material's elasticity after it is submerged in water for varying durations, since elasticity is based on the stress and strain on the material, we need to draw a graph of stress vs strain which is also called a stress - strain curve.

The stress strain curve is a graphical tool that helps us know to know the amount of load a material can take before it will stretch and break.

Read more about stress - strain curves at; https://brainly.com/question/22394570

A positively charged electric has a charge of 2 Coulombs. If 12.5x10^18 free electrons are added to it, what will be the net charge on the said dielectric?

Answers

The net charge on the said dielectric is 0

1C = 6.25 * 10¹⁸ electrons; hence:

-12.5x10¹⁸ free electrons = (-12.5x10¹⁸ free electrons * (1C/ 6.25 * 10¹⁸ electrons))

-12.5x10¹⁸ free electrons = -2 C

A positively charged electric has a charge of 2 Coulombs, hence:

Q₁ = 2C

12.5x10¹⁸ free electrons are added to it, hence:

Q₂ = -2C

[tex]Net\ charge(Q_{net})=Q_1+Q_2=2C+(-2C)=0[/tex]

Hence the net charge on the said dielectric is 0

Find out more at: https://brainly.com/question/10464929

Which of the following classes of biomaterials would be most appropriate for fabricating an artificial tendon, a tissue that must sustain substantial deformation at low forces and quickly regain its original dimensions after stress release? Why ?

(a) Metals
(b) Ceramics
(c) Polymers

Answers

B is the correct answer
B. Is the right answer hope this help

variable head permeability ?

Answers

Answer:

The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.

Explanation:

As
is the rate (in time and distance) at which that force
is a twisting or turning force,
is produced
(
Select one:
O A. Torque; horsepower; torque
OB. Torque; horsepower; horsepower
O C. Horsepower; torque; horsepower
O D. Horsepower; torque; torque
Clear my choice

Answers

Answer:

C

Explanation:

As horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.

What is horsepower?

Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.

To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.

Thus, as horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.  

To learn more about horsepower, refer to the link below:

https://brainly.com/question/12260337

#SPJ2

In the figure, particle 1 of mass m1 = 3.1 kg slides rightward along an x axis on a frictionless floor with a speed of 5.0 m/s. When it reaches x = 0, it undergoes a one-dimensional elastic collision with stationary particle 2 of mass m2 = 4.6 kg. When particle 2 then reaches a wall at xw = 79 cm, it bounces from the wall with no loss of speed. At what position on the x-axis does particle 2 then collide with particle 1?

Answers

Answer:

We use Eq 9−67 and 9−68 to find the velocities of the particles after their first collision (at x=0 and t=0 )

ν

1f

m

1

+m

2

m

1

+m

2

ν

1i

=

0.30kg+0.40kg

0.30kg−0.40kg

(2.0m/s)=−0.29m/s

ν

2f

=

m

1

+m

2

2m

1

ν

1i

=

0.30kg+0.40kg

2(0.30kg)

(2.0m/s)=1.7m/s .

At a rate of motion of 1.7m/s,2x

w

=140cm (the distance to the wall and back to x=0 ) will be traversed by particle 2 in 0.82s . At t=0.82s , particle 1 is located at

x=(−2/7)(0.82)=−23cm ,

and particle 2 is " gaining " at a rate of (10/7)m/s leftward ; this is their relative velocity at that time . Thus , this "gap" of 23cm between them will be closed after an additional time of (0.23m)/(10/7m/s)=0.16s has passed . At this time (t=0.82+0.16=0.98s) the two particles are at x=(−2/7)(0.98)=−28cm

Explanation:


How is a scale model different from other types of models?
It is made with clay.
It includes many engineers' ideas.
It maintains correct spatial relations.
It is the last type of godel created in the design process

Answers

Answer:

A scale model is a representation or copy of an object that is larger or smaller than the actual size of the object being represented. Very often the scale model is smaller than the original and used as a guide to making the object in full size.

Explanation:

Answer:

C.) It maintains correct spatial relations

Explanation:

Ong that's the answer

Twisting force is known as: A. thrust.
B. horsepower.
C. torque.
D. energy

Answers

C. Torque. Hope this helps!!!!!!!!

A nut driver is a variation of a socket wrench, true?

Answers

Answer:

TRUE

Explanation:

Answer: True

Explanation: Nut drivers are sockets that can be snapped on or permanently fixed to a screwdriver-type handle.

Warning danger ahead sign

Answers

Answer: okiiiii

Explanation:

Answer

Ok

Explanation

Read an integer from the user repeatedly, until the user enters a negative number. use for loop (C programming)​

Answers

Answer:

go on then

Explanation:

. What is wrought iron? Discuss in brief its chemical composition, properties and applications.​

Answers

Answer:

Wrought iron is an iron alloy with very low carbon content with respect to cast iron.

Explanation:

It is soft, ductile, magnetic, and has high elasticity and tensile strength. It can be heated and reheated and worked into various shapes.

Answer:

Wrought iron is an ferrous metal with a very low amount of carbon (less than 0.08%) compared to cast iron (2% or more). It is a semi-molten mass of iron with a fibrous sheath (up to 2% by weight), giving it a "grain" similar to wood grain, visible when bent or bent to the point of fracture. Wrought iron, malleable, easy to draw, corrosion resistant and easy to weld. Explanation:

Determine the location of the maximum bending moment. In the formula, w is the rate of load increase in lb ft and l is the length (in ft) of the beam. calculus

Answers

https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/

A live load on a house includes the
A.Weight of snow or rain
B.Furnishings
C.Pressure of the earth against the foundation
D.Built-in cabinets

Answers

Answer:

D

Explanation:

Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.

Answers

The correct answer is C. Torque

A cylindrical work part has a diameter and a height of both as 6cm. The coefficient of friction at the die work interface is 0.10. The work metal has a strength coefficient of 270MPa, yield strength of 110MPa, and a strain hardening exponent of 0.15. Determine the instantaneous force in N at a height of 4cm

Answers

the answer to this question: 4.50

Technician A states that about 33% of the heat energy created is wasted by being dumped straight out
of the exhaust to the atmosphere. Technician B states that 33% is wasted by internal friction and from
radiating off hot engine components straight to the atmosphere. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither Anor B

Answers

Heat energy is the known to be a product of the movement of tiny particles called atoms, molecules or ions. The true statement is by Technician A.

Internal combustion engine is dependent on the heat of combustion so as to make torque to move the vehicle and power the system.

A lot of heat made during combustion is not often used productively and therefore need to be removed to avoid overheating of the engine.

The heat energy that is not used for is wasted in three ways: They are:

About 33% is wasted by being dumped straight out of the exhaust to the atmosphere. About 33% is wasted by the cooling system, which prevents overheating of the engine components. About 5% is wasted by internal friction and from radiating off of hot engine components straight to the atmosphere.

Learn more from

https://brainly.com/question/14566159

binary classification algorithm

Answers

Answer:

What is this exactly?

Explanation:

If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.

Engineer It A water heater is a tank in which cold water is heated. Cold water flows into the tank to keep it full. A heating element warms the water inside the tank. The heated water can then be sent to hot water faucets in a building. Assume that a water heater design requires the hottest water possible to be sent to hot water faucets in a building. Where would be the best place for the hot water outlet pipe to be attached to the tank: the top, the middle, or the bottom of the tank? Explain your answer.

Answers

Answer:

i think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top

Explanation:

I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

What is Heater?

The process of transforming electrical current into heat energy is known as electric heating. An electrical resistor serves as the heating element in an electric heater, and heat is generated there when an electric current flows through it.

This procedure is frequently utilized in a wide range of domestic applications. from using an electric burner to prepare food, a kettle to boil water, and of course, house heating.

With one significant exception—they don't rely on a boiler and a system of pipes to produce the heat—electric heaters and radiators function exactly like your central heating radiators that are plumbed in.

Therefore, I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

To learn more about Heating, refer to the link:

https://brainly.com/question/1429452

#SPJ2

what is Agriculture and Environmental Engineering ​

Answers

Answer:

Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.

As an engineer you are responsible for selecting and procuring pump for your water distribution system. After some background study you selected and purchased an 1160 rpm Taco 4013 FI and CI series pumps with a 12.75 impeller diameter (for details see the ppt slides for the pump chapter). After procuring the pump you realize that you should have purchased a similar pump but with a 2000 rpm.

Required:
a. What will be your approach to handle this situation?
b. How would you prepare a performance curve at 2000 rpm?

Answers

In this picture there is answer…..

How does science and technology address the problems of the society?

Answers

Answer:

By ads online video (sorry if this doesn't help

Answer:

Through science and technology, we have solved many of humanity's problems, including hunger (at least in the Western world) with farming technologies and curing diseases through medical technologies. Inventions such as dishwashers, washing machines, and artificial lights have saved us immense amounts of time.

Explanation:

Science can not solve all of our problems. While scientific understanding can help battle things like disease, hunger, and poverty when applied properly, it does not do so completely and automatically. Furthermore, there are many areas of life where science can have little impact.

List the crops that can be used dibbler .

Answers

Answer:

A dibber or dibble or dibbler

Explanation:

A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber

Differentiate between strain hardening exponent and strain rate sensitivity ​

Answers

Whaaaaaaaaaaaaaaaaaaaaaaaaaaatttttttttttttttttttttt


Which of the following is a Dashboard Scoreboard for alignment of the business where information is constantly flowing through the Tiers so immediate actions can be taken?

Answers

Answer:

What is a dashboard?

A dashboard is an information management tool used to track KPIs, metrics, and key data points that are relevant to your business, department, or a specific process. Dashboards aggregate and visualize data from multiple sources, such as databases, locally hosted files, and web services. Dashboards allow you to monitor your business performance by displaying historical trends, actionable data, and real-time information.

Dashboards actually take their name from automobile dashboards and they are used in much the same way. For the sake of an analogy, let’s look at a car. There may be hundreds of processes that impact the performance of your vehicle if you look under the hood. Your car’s dashboard summarizes this using visualizations so you can focus on what matters most: safely driving your vehicle.

For businesses, there are hundreds of processes that impact your performance if you look ‘under the hood’, so to speak. And with a wealth of data made available these days, managing and extracting value from it can be difficult. Simplifying data analysis and distribution through tools like dashboards is a way to help businesses rev their engines and make smarter, better, faster data-driven decisions.

And a well designed dashboard levels up your approach to information management. Everyone in the business, regardless of role, has questions about your company performance, whether it be campaign performance, new wins, or churn rate. Dashboards bring everyone (and your metrics) together in one place to answer these questions.

Explanation:

Other Questions
When different sequences of operations are required for creating small batches of different products, the type of design or layout used is the a. process layout. b. product layout. c. quota layout. d. output layout. e. product design. Even though human proteins are made from only 20 different amino acids, there are thousands of differen proteins found in human cells. What allows for so much variation in the proteins? Can someone help me with this part? Please How many solutions does this equation have? -3s + 10 = 7s Use the function g(x)=11 to find the following valuesg(-3) I'm going to give 50 points and brainliest answer if you tell me where mr.beast are. Why does the fungus: Phytophthora infestans, attack potato crops? 13. During the industrial revolution, where did people move to? How were conditions in the factories? How did industrialization change the way people lived? A gold doubloon 6.1 cm in diameter and 2.0 mm thick is dropped over the side of a pirate sheep. When it comes to rest on the ocean floor at a depth of 770 m, how much has its volume changed? simple past e past perfect 1.They ... (do) nothing before they met me. *a)hadn't donec)haven't doned)have did2.. I thanked him for what he ... (do). *a)has doneb)had donec)had do3.They ... (clean) the room before I ... (call) them. *a)had cleaned - callb)have cleaned - calledc)had cleaned - called4.He ... (tell) us the story of this life before he died. *a)had telledb)had toldc)has told5.He ... (tell) me her name after she ... (leave). *a)told - had leftb)tell - had leavedc)told - has left6.After the students ... (finish) the test the teacher left the room.a)had finishedb)have finishedc)had finish 7.We ... (hear) a strange noise yesterday. *a)have heardb)heardchad heard8.She posted the letter after she ... (write) it. *a)has writtenb)have writtenc)had written9.After they ... (go), I sat down and rested. *a)wentb)had gonec)have gone maitenant on considre un carr ABCD dont l'aire est 6,25 dm au carr quelle est la mesure de son ct AB justifier. questin suivante a.quelle est l'aire en dm au carr de chacun des carr de depart b.quelle est l'aire du nouveau carr obtenu. question6.on veut maitenant trouver la longueure exacte du ct du carr reconstitu sachant que son aire est 2dm au carr on recherche donc un nombre positif x tel que x x =x au carr =2 en faisant differents essais proposer une valeur dcimal pour x puis 7 que peut-ton conclure. The following items were selected from among the transactions completed by Sherwood Co. during the current year:Mar.1Purchased merchandise on account from Kirkwood Co., $225,000, terms n/30.31Issued a 30-day, 8% note for $225,000 to Kirkwood Co., on account.Apr.30Paid Kirkwood Co. the amount owed on the note of March 31.Jun.1Borrowed $600,000 from Triple Creek Bank, issuing a 45-day, 6% note.Jul.1Purchased tools by issuing a $50,000, 60-day note to Poulin Co., which discounted the note at the rate of 6%.16Paid Triple Creek Bank the interest due on the note of June 1 and renewed the loan by issuing a new 30-day, 7% note for $600,000. (Journalize both the debit and credit to the notes payable account.)Aug.15Paid Triple Creek Bank the amount due on the note of July 16.30Paid Poulin Co. the amount due on the note of July 1.Dec.1Purchased equipment from Greenwood Co. for $280,000, paying $80,000 cash and issuing a series of ten 9% notes for $20,000 each, coming due at 30-day intervals.22Settled a product liability lawsuit with a customer for $40,000, payable in January. Accrued the loss in a litigation claims payable account.31Paid the amount due to Greenwood Co. on the first note in the series issued on December 1.Required:1.Journalize the transactions. Refer to the Chart of Accounts for exact wording of account titles. Assume a 360-day year.2.Journalize the adjusting entry for each of the following accrued expenses at the end of the current year (refer to the Chart of Accounts for exact wording of account titles):a. Product warranty cost, $65,000.b. Interest on the nine remaining notes owed to Greenwood Co. Assume a 360-day year. Reescribe cada oracin utilizando los signos de puntuacin necesarios. Recuerda escribir letra mayscula donde corresponda. despus del examen salimos juntos a almorzar 2^x+2=4081Solve the following exponential equation I need help with these questions. Thanks! Which phrase from the first stanza of "The Raven" creates the most suspense by making a question appear in the minds of the speaker and reader? Once upon a midnight dreary, while I pondered, weak and weary While I nodded, nearly napping suddenly there came a tapping. What does Paul mean when he tells the people at home this is really the only thing: just to sit quietly, like this (168)?Paul means that he believes peace and safety are valuablePaul means that he believes strength, courage, and resourcefulness are valuable.Paul means that he believes stability, kindness, and happiness are valuable.Paul means that he believes family, friends, and country are valuable. Ufbufbioaerubvfbiahffbbeaifhfia help me the difference of 3 times a number and 2 times that same number is 80.what is the number Factor x3 7x2 5x + 35 by grouping. What is the resulting expression?