Answer:
Hydrogen
Explanation:
Hydrogen, most abundant in the universe, is the chemical element with atomic number 1, and an atomic mass of 1.00794 amu, the lightest of all known elements. It exists as a diatomic gas (H2).
Answer:
Hydrogen
Explanation:
Hydrogen, most abundant in the universe, is the chemical element with atomic number 1, and an atomic mass of 1.00794 amu, the lightest of all known elements. It exists as a diatomic gas (H2).
Maintaining constant pressure, the volume of a gas is increased from 12,0 L
to 32.0 L by heating it. If the original temperature was 23.0°C, what is the
new temperature? *
23. 45 K
61.33 K
789.33 K
567.87 K
Answer:
790 K
Explanation:
Step 1: Given data
Initial volume of the gas (V₁): 12.0 LInitial temperature of the gas (T₁): 23.0 °CFinal volume of the gas (V₂): 32.0 LStep 2: Convert 23.0 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 23.0 + 273.15 = 296.2 K
Step 3: Calculate the final temperature of the gas
Assuming constant pressure and ideal behavior, we can calculate the final temperature of the gas using Charles' law.
T₁/V₁ = T₂/V₂
T₂ = T₁ × V₂/V₁
T₂ = 296.2 K × 32.0 L/12.0 L = 790 K
The minimum combined kinetic energy reactant particles must possess in order for their collision to result in a reaction is called the
Answer: Activation energy
Explanation:
In a chemical reaction, the reactants contains particles which must collide in order for a reaction to occur. The rate of reaction depends on the frequency of effective collision between the reacting particles. Effective collision are those that result in reactions, which when they occur the colliding particles become activated with increased kinetic energy.
This energy must exceed a particular energy barrier for a particular reaction if the reaction must take place. This energy barrier that must be overcome before a reaction takes place is known as the ACTIVATION ENERGY.
To explain further, when two particles or molecules A and B come in contact with each other, for a reaction to take place, they must collide with a sufficient force to break the bond that exists between them. The minimum combined kinetic energy these reactant particles must possess in order for their collision to result in a reaction is called the activation energy.
(i)What happens when an aqueous solution of sodium sulphate reacts with an aqueous
solution of barium chloride ? (i) Write the balanced chemical equation for the reaction which takes place.(ii) Name the type of chemical reaction which occurs. Define.
Explanation:
2nacl+baso4
the orginal equation is
Na2so4+Bacl2
then na react with cl and ba react with so4
To increase the temperature of 100.0 g
of ice from -50.0? to -10.0?, how
much energy is required?
We are given:
Mass of ice = 100 grams
Initial temperature = -50°C
Final Temperature = -10°C
We know that the specific heat of ice is 2.09 joules / (gram * °c)
Heat Absorbed:
We know that:
ΔQ = mcΔT [where ΔQ is the heat absorbed]
ΔQ = (100 grams)(2.09)(-10 - (-50))
ΔQ = (100)(2.09)(40)
ΔQ = 8360 Joules
what is hard water??
Answer:
Hard water is any water that does not lather easily with soap. pipe water is an example of hard water.
I hope this helps . good luck.
Se hace reaccionar 4,00 g de aluminio y 42,00 g de bromo, según la reacción: Al(s)+Br2(l)⟶AlBr3(s) Calcular las moles de AlBr3(s) producido. PA: Al=27; Br=80
Answer:
0.145 moles de AlBr3.
Explanation:
¡Hola!
En este caso, al considerar la reacción química dada:
Al(s)+Br2(l)⟶AlBr3(s)
Es claro que primero debemos balancearla como se muestra a continuación:
2Al(s)+3Br2(l)⟶2AlBr3(s)
Así, calculamos las moles del producto AlBr3 por medio de las masas de ambos reactivos, con el fin de decidir el resultado correcto:
[tex]n_{AlBr_3}^{por\ Al}=4.00gAl*\frac{1molAl}{27gAl} *\frac{2molAlBr_3}{2molAl}=0.145mol AlBr_3\\\\n_{AlBr_3}^{por\ Br_2}=42.00gr*\frac{1molr}{160g Br_2} *\frac{2molAlBr_3}{3molBr_2}=0.175mol AlBr_3[/tex]
Así, inferimos que el valor correcto es 0.145 moles de AlBr3, dado que viene del reactivo límite que es el aluminio.
¡Saludos!
One liter of a gas is in a sealed chamber containing a moveable piston. If the piston is moved so that the volume of the gas is compressed to a volume of one-half liter, what will happen to the pressure on the gas? (Assume the temperature is constant and no gas particles are lost.)
Answer:
One liter of a gas is in a sealed chamber containing a moveable piston. ... It would be impossible to move the piston since gases are not compressible. The pressure will be twice the original value.
Explanation:
How many kilojoules (kJ) in 373 joules (J)?
Answer: There are 0.373 kJ in 373 joules.
Explanation:
According to the standard conversion units 1 kJ is equal to 1000 J. This means that 1 J is equal to 0.001 kJ.
Hence, 373 joules is converted into kilojoules as follows.
[tex]1 J = 0.001 kJ\\373 J = 373 J \times \frac{0.001 J}{1 kJ}\\= 0.373 kJ[/tex]
Thus, we can conclude that there are 0.373 kJ in 373 joules.
34. Which statement describes what occurs in the
following redox reaction?
Cu(s) + 2Ag (aq) → Cu2+ (aq) + 2Ag(s)
(1) Only mass is conserved.
(2) Only charge is conserved.
3 Both mass and charge are conserved.
(4) Neither mass nor charge is conserved.
Answer:
3 Both mass and charge are conserved.
Explanation:
The equation of the reaction is;
Cu(s) + 2Ag+ (aq) → Cu2+ (aq) + 2Ag(s)
A redox reaction is an acronym for oxidation-reduction reaction. This refers to a reaction in which the oxidation number of one specie is increased while the oxidation number of the other specie is decreased.
This means that one specie looses electrons while the other specie gains electrons. Here, Cu(s) looses electrons while Ag+(aq) gains electrons from left to right in the reaction.
In a redox reaction, both mass and charge are conserved. This means that the total mass and charge on the reactants side is the same as the total mass and charge on the products side.
how much mercury-203 remains after 200 days
Answer:
50%
Explanation:
What is the [OH-] of a solution with a pH of 3.89?
Which one is it?
7.76 x 10^-11
1.29 x 10^-4
2.11 x 10^-6
4.51 x 10^-10
Answer:
the answer is 211106 is better than anything else about u and then let's go play with kids like that first time in the class ohh ok
How much is 1 mole of something?
Answer: D.
Explanation:
6.02 * 10^-23
A sample of propane, C3H8, contains 17.0 moles of carbon atoms. How many total moles of atoms does the sample contain
Answer:
The answer is "62.33 mol atoms".
Explanation:
In the propane molecule, it includes 8 atoms of Hydrogen for every 3 atoms of Carbon or 8 mol Hydrogen atoms for each of the 3 mol Carbon atoms.
[tex]\text{H atoms mole}= 17.0 \ \text{mols of C atoms} \times \frac{8 \text{mol H atoms}}{3 \text{mol H atoms}} =45.33\ \text{mol H atoms}[/tex]
Total atoms = 17.0 mols of C atoms +45.33 mols of H atoms
=62.33 mol atoms
Why is it necessary to keep the total number of drops in the test tubes
consistent?
Answer:
I don't know if this is right but..
Explanation:
It is important to keep the volume of the reactant constant because it ensures that the temperature change was the result of the reactants consumed
Why it is necessary to keep the to drops in the test tubes consistent is:
To be able to achieve your desire results, it is imperative that you follow the procedure and use the drops specified because any other drop may shift the equilibrium to the right and this will increase the rate of reaction leading to more collisions of that reactant in a specific time period and therefore alter (slow or increase) the chemical reaction.In a chemical reaction, the reactants, are undergoing chemical reaction which therefore brings about a products. The reaction rate shows how quickly or slowly the reaction takes place.Conclusively, Why it is necessary to keep the to drops in the test tubes consistent is:
To be able to achieve your desire results, it is imperative that you follow the procedure and use the drop specified because any other drop may shift the equilibrium to the right and this will increase the rate of reaction leading to more collisions of that reactant in a specific time period.Learn more from
https://brainly.com/question/14197404
When fluorine (F) forms chemical compounds with metals, the fluorine atom gains electrons , looses electrons
g You are testing the adsorptive properties of a new material (with very small particles), using methylene blue. You are in a rush and decide you don't have time to centrifuge your samples before measuring the dissolved concentration. What effect might you expect to see in your data
Answer:
The data will be error free and more correct.
Explanation:
The data will show no error while testing the adsorptive properties of a new material if no centrifuge method is not used because there is no need for centrifuge method. For determining the adsorptive properties of a new material, we can measure the data after dissolving . Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface while on the other hand, Centrifugation is the process where a mixture is separated from one another through fast spinning. so for determining the adsorptive properties, no centrifugation process is required and we get the correct data without centrifugation.
How many grams of chlorine are required in order to consume 100g of sodium chloride?
Answer:
92.1 g
Explanation:
Answer: 92.1 grams
I hope this helped :3
What is the mass of 6.02 x 1023 atoms of carbon-12?
A)
me
6 grams
B)
6.02 grams
6.02 x 1023
grams
D)
12 grams
Answer: its D 12 grams
Explanation: you just have to find the molar mass of carbon in the periodic table
How many grams of calcium chloride are required to make 20 grams of calcium hydroxide? CaCl2 + 2 NaOH → Ca(OH)2 + 2 NaCl
Answer:
30.0g CaCl2
Explanation:
20.0g Ca(OH)2=0.270mol
(0.270mol)(111.0g/mol)=30.0g CaCl2
Which process produces the energy that is used by solar panels?
O A. Nuclear fusion
O B. Combustion
O C. Chemical decay
D. Nuclear decay
Answer:
B
Explanation:
Answer:
A
Explanation: got it right
A chemist wants to extract copper metal from copper chloride solution. The chemist places 0.25 grams of aluminum foil in a solution of 0.40 grams of copper (II) chloride. A single replacement reaction takes place. What are the likely observations when the reaction stops? Unbalanced equation: CuCl2 + Al → AlCl3 + Cu
Answer: About 0.20 grams of copper (II) is formed, and some aluminum is left in the reaction mixture
Answer:Answer B: About 0.20 grams of copper (II) is formed, and some aluminum is left in the reaction mixture
Explanation:
How are photosynthesis and cellular respiration related?
A. Photosynthesis releases energy, while cellular respiration stores energy
B. Cellular respiration breaks down glucose, while photosynthesis produces glucose.
C. Cellular respiration is the process animals use to produce glucose, while photosynthesis is the process plants use to produce glucose.
D. Photosynthesis produces water molecules, while cellular respiration splits water molecules apart.
Answer:
B part is the correct answer
Is anyone good at chemistry if so Is it possible could someone help me please
NO LINKS I REPEAT NO LINKS
344.0 / 68.8 = 5 (no.of half life that have elapsed)
Mass remains = (1/2)^n × (original mass)
= (1/2)^5 × 200
= (0.5) ^5 × 200
= 0.03125 × 200
= 6.25 grams
Deep sea divers can experience the bends due to an increased amount of nitrogen in the blood
with higher pressure if they dive deeper than 40 meters and come up too fast. If at 1.05 atm
(surface conditions) the solubility of nitrogen, N2, is 21.1 mg/L, what is the solubility at this 40m
depth where the pressure is 4.97 atm?
a. 21.1 mg/L
b. 42.2 mg/L
C. 49.9 mg/L
d. 99.9 mg/L
b is the correct answer
Answer: D. 99.9mg/L
Explanation:
21.1x4.97/1.05=99.9
Name one common base that is NOT harmful to the body when ingested AND a product, or way, in which it is used.
Answer:
well when you eat some food you will get many tastes mixed with base and acid but salt from NA2CO3 can be a base if it is contained with weak acid.
Explanation:
Basically SALT can be one common base that is NOT harmful to the body when ingested AND a product, or way, in which it is used.
Magnesium hydroxide (Mg(OH)2) is not harmful to our body when ingested AND a product, or way, in which it is used. It is commonly used to get relief from acidity, that is caused when our stomach releases excessive acid. It neutrelises the acid and gives us relief. It is also called Milk of Magnesia commonly.
How many liters of Argon gas are present in a 10.5 mole sample?
Answer:
235.2 L ( if the sample is under S.T.P condition )
Explanation:
For any gas at S.T.P (0°c, 1 atm), 1 mole=22.4 L
Thus, for 10.5 mole of Ar, there are 10.5*22.4=235.2 L
mechanism of the reaction citric acid with sodium bicarbonate?
Explanation:
When citric acid and baking soda react with one another, they change chemi- cally and form sodium ions, citric acid ions, carbon dioxide gas, and water. ... It also makes up the bubbles in carbonated drinks and is a gas we naturally exhale. Carbon dioxide gas is safe in the quantities produced in the activities.
A nurse practitioner prepares 470. mL of an IV of normal saline solution to be delivered at a rate of 85 mL/h. What is the infusion time, in hours, to deliver 470. mL?
Answer: Infusion time is 5.5 h
Explanation: Time is 470 ml / 85 ml/h = 5.5 h
Which of the following is most easily oxidized?
A. Ni2+
B. Fe3+
C. H+
D. Fe2+
Answer:
B: Fe3+
Explanation:
Usually in oxidation reactions, the oxidation number of a monatomic ion is the same as the charge on the ion, for example: oxidation number for Na^(+) is +1 , while in S^(2-), oxidation number is -2.
Now, from the activity series of metals in aqueous solution which I attached, we will see that iron (Fe) is easily oxidized than Nickel (Ni2+) and hydrogen (H+).
So we are left with Fe^(2+) and Fe^(3+).
Now, an increase in oxidation number means the more likely to be oxidized.
Thus, Fe^(3+) is the most easily oxidized.
What chemical is used to represent compounds
Answer:
Compounds are represented by chemical formulas. Elements in a compound are represented by chemical symbols, and the ratio of different elements is represented by subscripts.