what volume of a 4.41 mm na3po4na3po4 solution should you use to make 1.70 ll of a 2.81 mm na3po4na3po4 solution? what volume of a 4.41 solution should you use to make 1.70 of a 2.81 solution? 0.923 ll 2.67 ll 21.1 ll 1.08 l

Given:[tex]247 ${{cm}^{3}}$[/tex]. We need to convert it to in³ using the conversion factor [tex]$1~in=2.54~cm$[/tex] .Solution: We have been given that,[tex]1 $in = 2.54$ $cm$[/tex] Let the volume in cubic inches be cubic inches.

Then, 247 cubic centimeters will be converted to cubic inches by multiplying by[tex]$\frac{1~in}{2.54~cm}$[/tex] since 2.54 cm = 1 in. Therefore, we have:[tex]$$x~in^{3}= 247~cm^{3}\times\frac{1~in^{3}}{(2.54~cm)^{3}}$$[/tex]To simplify this, we can use the fact that [tex]$1~in=2.54~cm$ so that $(2.54~cm)^{3}=1~in^{3}$.$$x~in^{3}=\frac{247~cm^{3}}{(2.54~cm)^{3}}$$[/tex]Evaluate this on a calculator to obtain the value of in cubic inches. This is given as follows:[tex]$$x~in^{3} = 15.06~in^{3}$$[/tex]

Therefore, $247$ cubic centimeters is equivalent to $15.06$ cubic inches. We can verify this by reversing the conversion.

To know more about conversion factor  visit:

brainly.com/question/1014744

#SPJ11

The NEC (National Electrical Code) Table 250.66 is used for sizing grounding electrode conductors and bonding jumpers between electrodes in the grounding electrode system.

The NEC (National Electrical Code) Table is a collection of tables included in the National Electrical Code, which is a standard set of guidelines and regulations for electrical installations in the United States. The NEC is published by the National Fire Protection Association (NFPA) and is widely adopted as the benchmark for safe electrical practices.

This table provides guidelines and requirements for determining the appropriate size of conductors and jumpers based on the type and size of the grounding electrodes used in an electrical system. It takes into account factors such as the type of material, the length, and the specific application to ensure proper grounding and bonding in accordance with the NEC standards. It is essential to consult the specific edition of the NEC for accurate and up-to-date information.

To know more about NEC (National Electrical Code)

brainly.com/question/32316986

#SPJ11

The option that is consistent with the principles of green chemistry when comparing different methods for synthesizing a target compound is small %AE and large E-factor. Correct answer of this question is Option A

This is because Green Chemistry is all about developing processes and techniques that are environmentally safe and sustainable. The %AE or the percent atom economy refers to the amount of atoms present in a product that are useful in making the target compound.

On the other hand, E-factor or the environmental factor measures the total amount of waste created in the process of making the target compound. So, it is evident that Green Chemistry focuses on the efficient use of materials and reducing waste.

When comparing different methods for synthesizing a target compound, a small %AE and a large E-factor is consistent with the principles of green chemistry. This is because a small %AE means that fewer reactants are wasted in the process. The E-factor, however, measures the amount of waste generated during the production of the target compound. A large E-factor means that more waste is produced, which is not sustainable.

Thus, Green Chemistry focuses on maximizing the atom economy and minimizing waste production during the synthesis of the target compound. Therefore, a small %AE and a large E-factor is the option that is consistent with the principles of green chemistry when comparing different methods for synthesizing a target compound. Correct answer of this question is Option A

Know more about green chemistry here:

https://brainly.com/question/31862654

#SPJ11

If A₂ is the limiting reactant, then the moles of excess B₂ remaining will be y - (3x).
If B₂ is the limiting reactant, then the moles of excess A₂ remaining will be x - (y/3).

The given reaction is A₂ + 3B₂ -> 2 AB₃.

To determine the limiting reactant, we need to compare the number of moles of A₂ and B₂ present in the mixture.

Let's assume that there are x moles of A₂ and y moles of B₂ in the mixture.

According to the reaction, 1 mole of A₂ reacts with 3 moles of B₂ to produce 2 moles of AB₃.

So, for x moles of A₂, we would need 3x moles of B₂ to react completely.

Now, let's compare the moles of A₂ and B₂ in the mixture:

- If y > 3x, then B₂ is the limiting reactant because we have more moles of B₂ than required to react with A₂ completely.
- If y < 3x, then A₂ is the limiting reactant because we have more moles of A₂ than required to react with B₂ completely.
- If y = 3x, then both A₂ and B₂ are in stoichiometric ratio and neither is the limiting reactant.

To find the moles of AB3 that can form, we look at the stoichiometric ratio of the reaction.

Since 1 mole of A₂ reacts with 3 moles of B₂ to produce 2 moles of AB₃, we can say that the moles of AB₃ formed will be 2 times the moles of A₂ or B₂, whichever is the limiting reactant.

To find the moles of excess reactant remaining, we need to subtract the moles of the limiting reactant used from the total moles of that reactant in the mixture.

If A₂ is the limiting reactant, then the moles of excess B₂ remaining will be y - (3x).
If B₂ is the limiting reactant, then the moles of excess A₂ remaining will be x - (y/3).

Remember to calculate the moles of AB₃ formed and the moles of excess reactant remaining based on the limiting reactant.

Learn more about stoichiometric ratio  at https://brainly.com/question/6907332

#SPJ11

3.1 Differentiation between weak and strong acid:Acids are classified into two types; strong acids and weak acids. The primary distinction between these two is their ability to dissociate in water.

Strong acids are those that can completely dissociate in water to produce H+ ions while weak acids only partially dissociate in water.5.2.1 Weak acid A weak acid is a type of acid that only partially ionizes in water to produce H+ ions. This means that in an aqueous solution, weak acids have a lower concentration of hydrogen ions and a higher concentration of acid molecules. As a result, weak acids have a lower pH than strong acids.

Examples of weak acids include acetic acid and formic acid.5.2.2 Strong acid Strong acid is an acid that is capable  in water to produce H+ ions. When these acids dissolve in water, they completely break apart into their respective ions, giving a higher concentration of hydrogen ions. Strong acids have a low pH because of the abundance of hydrogen ions present.

To know more about classified visit:

brainly.com/question/33446476

#SPJ11

The list of functional groups shown on the protected amine is amide, imide, ester. The correct option is A.

Functional groups are a group of atoms within a molecule that determines the chemical and physical properties of that molecule. The protected amine refers to the intermediate that has been obtained by removing the initial protecting group. The removal of the protecting group reveals the amino group, which can be functionalized using other organic reactions.

The amide functional group is characterized by the presence of a carbonyl group attached to an amine group, i.e., -CO-NH2. The imide functional group is characterized by a cyclic compound with two carbonyl groups in the ring.

Ester is characterized by the functional group R-CO-O-R', in which an ester bond is formed by the reaction between a carboxylic acid and an alcohol. Hence, the list of functional groups shown on the protected amine is amide, imide, ester.

Learn more about Ester from the given link:

https://brainly.com/question/32098100

#SPJ11

The change in conditions to go from a gas to a solid is cooling or reducing pressure. The correct answer is option c.

Pressure is defined as the force exerted per unit area. The SI unit of pressure is Pascal.

When a gas is cooled, its molecules lose kinetic energy and move more slowly, which allows them to come closer together and form a solid.

Reducing pressure also allows gas molecules to come closer together and form a solid, as there is less space for them to move around.

Whereas, increasing heat or pressure would have the opposite effect, as they would increase the kinetic energy of gas molecules and cause them to move farther apart, which would make it more difficult for them to form a solid.

Therefore, the correct answer is option (c) cooling or reducing pressure is the condition to go from a gas to a solid.

Learn more about pressure here:

https://brainly.com/question/18431008

#SPJ4

The price of the popular soft drink is more in 0.500 L container than in 24 oz. container.

The correct answer is option B. 0.500 L container.

The price of a popular soft drink is $0.98 for 24.0 fl. oz (fluid ounces) or $0.78 for 0.500 L.

Given that 1 qt. is equal to 32 fl.oz, 1 L is equal to 33.814 fl.oz, and 1 qt is equal to 0.94635 L.

In this case, the quantity of a particular soft drink in a 24 oz. container and a 0.500 L container is to be determined.

Let x be the amount of soft drink in the 24 oz container.

Then, the amount of soft drink in 0.500 L container can be given by 0.500 L * (33.814 fl.oz/1 L) = 16.907 fl.oz.

Thus, we have 32 fl.oz is equal to 0.94635 L or 1 qt.

Therefore, we can say 24.0 fl. oz is equal to (24/32) qt = 0.75 qt.

Hence, the amount of soft drink in the 24 oz. container is 0.75 qt.

Now we can calculate the price per qt as follows:Price of 24 oz. container = $0.98Price per qt. = $0.98/0.75 qt= $1.307/ qt.

Similarly, let y be the amount of soft drink in the 0.500 L container.

Then, the amount of soft drink in 0.500 L container is 0.500 L.

Now, we can calculate the price per qt for 0.500 L container as follows:Price of 0.500 L container = $0.78Price per qt. = $0.78/(0.500 L/0.94635 L/qt)= $1.483/qt.

The correct answer is option B. 0.500 L container.

For more such questions on soft drink

https://brainly.com/question/29992680

#SPJ8

The carbon concentration of an iron-carbon alloy just below the eutectoid can be determined using the lever rule and it is calculated to be 0.0002.

The lever rule is a mathematical expression used to calculate the fractions of two phases in an alloy based on their compositions. In this case, we are given that the fraction of total ferrite is 0.9. The total ferrite fraction is the fraction of ferrite plus the fraction of cementite (which is the other phase in the eutectoid alloy). Since the eutectoid alloy contains 0.022% carbon, we can assume that the fraction of cementite is 1 - 0.9 = 0.1.

Using the lever rule, we can write the equation:
Fraction of ferrite = (Carbon concentration - Carbon concentration of cementite) / (Carbon concentration of ferrite - Carbon concentration of cementite)

Since the carbon concentration of ferrite is 0.022% and the carbon concentration of cementite is 6.7%, we can substitute these values into the equation:

0.9 = (Carbon concentration - 6.7%) / (0.022% - 6.7%)

Simplifying the equation, we get:

0.9 * (0.022% - 6.7%) = Carbon concentration - 6.7%

Solving for the carbon concentration, we find:

Carbon concentration = 0.9 * (0.022% - 6.7%) + 6.7%

= 0.0002

Therefore, the carbon concentration of the iron-carbon alloy just below the eutectoid, for which the fraction of total ferrite is 0.9, can be calculated using the lever rule.

More on carbon concentration: https://brainly.com/question/14881743

#SPJ11

Lines that run north and south on the earth's surface are known as Latitude lines and Longitude lines. These lines are both imaginary circles that circle the earth. Latitude and longitude lines are used by scientists and navigators to determine locations on the earth's surface.

These lines are used to pinpoint an exact location on the earth's surface. Latitude and longitude lines on the Earth's surface.

A. Latitude lines are horizontal lines that run from east to west. These lines are measured in degrees north or south of the equator.

B. Longitude lines are vertical lines that run from north to south. These lines are measured in degrees east or west of the prime meridian.

C. The equator is an imaginary line that circles the earth, dividing it into the northern and southern hemispheres.

D. The Prime Meridian is an imaginary line that runs from the North Pole to the South Pole and is perpendicular to the equator.

2. Degrees of latitude and longitude can be divided into Degrees of latitude and longitude can be divided into minutes and seconds as well. Since a degree is a pretty large measurement, it is usually divided into smaller units called minutes. Minutes are divided even further into seconds.

A. One degree of latitude is divided into 60 minutes, which are further divided into 60 seconds.

B. One degree of longitude is also divided into 60 minutes, which are further divided into 60 seconds.

C. Hours and days are not used to divide degrees of latitude and longitude because they are not small enough units to be useful.

To know more about pinpoint visit:

https://brainly.com/question/10605161

#SPJ11

The chemical formulas for the following binary ionic compounds are a. Zinc chloride: The chemical formula of zinc chloride is ZnCl2.b. Iron (III) oxide:

The chemical formula of Iron (III) oxide is Fe2O3.c.Aluminium nitrate: The chemical formula of aluminium nitrate is Al(NO3)3.

To write the chemical formula for binary ionic compounds, follow the steps given below:

Step 1: Write the symbol and charge of the cation. A cation is an ion that has lost an electron

Step 2: Write the symbol and charge of the anion. An anion is an ion that has gained an electron.

Step 3: Balance the charges. The total positive charge of the cations must equal the total negative charge of the anions.

Step 4: Write the chemical formula by writing the symbol of the cation followed by the symbol of the anion.

To know more about Binary Ionic Compounds visit:

https://brainly.com/question/1502766

#SPJ11

The IUPAC name of SeBr is selenium bromide.

N₂O, the IUPAC name of this compound is dinitrogen monoxide.

The naming of binary compounds adheres to a set of regulations under the IUPAC system. In the case of binary nonmetal compounds, the element names and the necessary prefixes denoting the number of atoms present are usually included in the compound name.

SeBr is a chemical compound in which "Se" stands for the element selenium and "Br" for the element bromine. We utilize the names of the individual elements to call this compound, and we add the proper prefixes to denote the number of atoms.

There is only one selenium atom and one bromine atom in this compound, hence neither element needs a prefix. As a result, the substance is known as "selenium bromide."

Compound name in the IUPAC system is governed by a set of regulations. Prefixes for binary nonmetal compounds give the total number of atoms of each component.

In the case of N₂O, there are two nitrogen atoms and one oxygen atom in the molecule.

When there are two nitrogen atoms present, the prefix "di-" is used to signify this. Thus, the "N₂" component of the molecule is referred to as "dinitrogen."

Since the oxygen atom is presumptively monoatomic, the prefix "mono-" is not necessary.

When all the pieces are put together, the substance N₂O is known as "dinitrogen monoxide."

To know more about IUPAC:

https://brainly.com/question/28886448

#SPJ4

1. To calculate the number of nanograms equivalent to 0.0078 mg, you need to multiply 0.0078 mg by the conversion factor of 1,000,000 ng/mg. The result is 7,800 nanograms (ng). 2. To convert 300 decigrams (dg) to micrograms (μg), you need to multiply 300 dg by the conversion factor of 100 μg/dg. The result is 3,000 micrograms (μg).

1. To calculate the number of nanograms equivalent to 0.0078 mg, conversion factors and the relationship between milligrams and nanograms need to be used. Direct calculation from milligrams to nanograms is not possible without considering the appropriate conversion factors.

To convert milligrams to nanograms, we need to consider the conversion factor: 1 milligram (mg) is equal to 1,000,000 nanograms (ng). By multiplying 0.0078 mg by the conversion factor (1,000,000 ng/mg), we can determine the equivalent value in nanograms.

0.0078 mg is equal to 7,800 nanograms (ng). The conversion from milligrams to nanograms requires the use of appropriate conversion factors, as the units differ by six orders of magnitude. It is essential to employ the correct conversion factors when converting between different units of measurement.

2. 300 decigrams (dg) is equal to 3,000 micrograms (μg).

To convert decigrams to micrograms, we need to consider the conversion factor: 1 decigram (dg) is equal to 100 micrograms (μg). By multiplying 300 dg by the conversion factor (100 μg/dg), we can determine the equivalent value in micrograms.

300 decigrams is equal to 3,000 micrograms. The conversion from decigrams to micrograms requires the use of the appropriate conversion factor, where decigrams are multiplied by 100 to obtain micrograms. Conversion factors play a crucial role in accurately converting between different units of measurement.

To know more about nanograms click here:

https://brainly.com/question/31261482

#SPJ11

Solvolysis is the process of reacting an organic compound with a solvent, especially one that has a high dielectric constant.

When bromomethyl cyclopentane undergoes solvolysis in methanol, a complex product mixture of the following five compounds is obtained. Here's a proposed mechanism to account for these products:

Firstly, the bromine atom present in bromomethyl cyclopentane gets replaced by a methanol molecule. As a result, a carbocation is formed in the first step.

Step 1: Bromomethyl cyclopentane + Methanol → Carbocation + Hydrogen bromide

Step 2: the carbocation undergoes attack by a methanol molecule. This attack can occur in two different positions, leading to two different products.

                  Step 2a: Carbocation + Methanol → Compound 1

                   Step 2b: Carbocation + Methanol → Compound 2

Step 3: the carbocation is attacked by a molecule of methanol to form an intermediate. The intermediate then undergoes a shift of the C-C bond, resulting in two more compounds.

                  Step 3a: Carbocation + Methanol → Intermediate → Compound 3

                  Step 3b: Carbocation + Methanol → Intermediate → Compound 4

Finally, the intermediate undergoes another methanol molecule attack, leading to the formation of the final product.

Step 4: Intermediate + Methanol → Compound 5T

Therefore, this is the mechanism proposed to account for the five products obtained from the solvolysis of bromomethyl cyclopentane in methanol.

Learn more about solvolysis:

https://brainly.com/question/29555642

#SPJ11

1. An atom with 2 protons and 4 neutrons: Helium-6

2. An atom with 4 protons and 4 neutrons: Beryllium-8

3. An atom with protons and 7 neutrons: Varies depending on the number of protons

4. An atom with 8 protons and 6 neutrons: Oxygen-14

The atoms mentioned are Helium-6, Beryllium-8, and Oxygen-14.

Helium-6 consists of 2 protons and 4 neutrons. It is an isotope of helium, a noble gas. Beryllium-8 has 4 protons and 4 neutrons and is an isotope of beryllium, an alkaline earth metal. On the other hand, an atom with protons and 7 neutrons does not have a specific name without knowing the number of protons. The combination of protons and neutrons determines the identity of an element. Finally, Oxygen-14 has 8 protons and 6 neutrons, making it an isotope of oxygen, a nonmetallic element commonly found in the Earth's atmosphere.

Learn more about isotopes.
brainly.com/question/27475737

#SPJ11

A pure titanium cube with an edge length of 2.84 inches contains approximately 2.107 x 10²⁵ titanium atoms.

To calculate the number of titanium atoms in the cube, we need to determine the volume of the cube and then convert it to the number of atoms using Avogadro's number.

First, let's convert the edge length of the cube from inches to centimeters:

1 inch = 2.54 cm

2.84 inches = 2.84 * 2.54 cm = 7.2136 cm

Next, let's calculate the volume of the cube:

Volume = (Edge length)³ = (7.2136 cm)³ = 373.409 cm³

Now, we can calculate the mass of the titanium cube using its density:

Mass = Density * Volume = 4.50 g/cm³ * 373.409 cm³ = 1675.8395 g

Next, we need to determine the molar mass of titanium (Ti):

Molar mass of Ti = 47.867 g/mol

Now, let's calculate the number of moles of titanium:

Number of moles = Mass / Molar mass = 1675.8395 g / 47.867 g/mol = 35.001 mol

Finally, we can calculate the number of titanium atoms using Avogadro's number:

Number of atoms = Number of moles * Avogadro's number = 35.001 mol * 6.022 x 10²³ atoms/mol ≈ 2.107 x 10²⁵ atoms

Therefore, the pure titanium cube contains approximately 2.107 x 10²⁵ titanium atoms.

To know more about edge length refer here :    

https://brainly.com/question/8315348#

#SPJ11                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

Therefore, the correct option is: an action potential would be created, and it would propagate in both directions down the axon (both toward the axon hillock and the axon terminal).

If an electrode were inserted into the middle of an axon halfway between the axon hillock and the axon terminal, and a depolarizing stimulus was triggered to bring that area of the axon to −60mV, an action potential would be created, but it would propagate in both directions down the axon (both toward the axon hillock and the axon terminal).The middle of an axon is a region that contains ion channels that allow ions to pass through when triggered.

An action potential is triggered once there is a depolarization of the membrane potential, and this spreads out in a wave-like manner to the axon terminal. This would result in the movement of the depolarization wave in both directions from the point where the electrode was inserted. Since the depolarization wave moves in both directions, the action potential created will be propagated to both the axon terminal and axon hillock.

to know more about membrane visit:

https://brainly.com/question/28592241

#SPJ11

Factor = molecular mass/empirical formula mass = 44.05/88.11 = 0.5Multiply the subscripts in the empirical formula by the factor to get the molecular formula.C4H9O2 × 0.5 = C3H6O2 Therefore, the molecular formula of the compound is C3H6O2.

The molecular formula of a compound with a per cent composition of C is 54.53%, H 9.15%, O 36.32%, and a molecular mass of 44.05 amu is C3H6O2.

The per cent composition of a compound is the percentage of each element present in a compound. The molecular formula is the formula showing the actual number of each type of atom in a molecule.

Follow these steps to calculate the molecular formula:

Calculate the empirical formula of the compound using the per cent composition and the molecular mass of the compound.

Divide the molecular mass of the compound by the empirical formula mass to find the factor by which the empirical formula should be multiplied to get the molecular formula.

Use the factor found in step 3 to multiply each of the subscripts in the empirical formula to get the molecular formula.

Example:C = 54.53/12.01 = 4.54H = 9.15/1.008 = 9.06O = 36.32/16.00 = 2.27

So the empirical formula of the compound is C4H9O2. The empirical formula mass is (4 x 12.01) + (9 x 1.008) + (2 x 16.00) = 88.11 amu.

Divide the molecular mass by the empirical formula mass to find the factor by which the empirical formula should be multiplied to get the molecular formula.

to know more about molecular formula here:

brainly.com/question/29435366

#SPJ11

The given formula is Eminimum= Φ = hνthreshold where Eminimum represents the minimum energy required to eject an electron from a metal surface, Φ is the work function of the metal, h is Planck's constant and νthreshold is the threshold frequency of the metal.

Given, Φ = 5.00 × 10⁻¹⁹ J. Therefore, Eminimum = Φ = 5.00 × 10⁻¹⁹ J.

The energy of a photon, E can be calculated from E = hν where h is Planck's constant and ν is the frequency of the photon.

The minimum energy required to eject an electron from the surface of a metal is the same as the energy of a photon that has a frequency equal to the threshold frequency. For a photon to be able to eject an electron from the surface of the metal, its energy must be greater than or equal to the minimum energy required to eject an electron.

The frequency of a photon can be related to its wavelength (λ) using the formula c = λν where c is the speed of light. Rearranging this formula gives ν = c/λ.

Substituting ν into the formula E = hν gives E = hc/λ. Therefore, the minimum wavelength (λmin) of the electromagnetic radiation required to eject an electron is given by λmin = hc/Eminimum = hc/Φ.

The longest wavelength (λmax) of electromagnetic radiation that can eject an electron from the surface of a piece of metal is equal to twice the minimum wavelength, i.e., λmax = 2λmin. Therefore,

λmax = 2hc/Φ

Substituting the values of h, c and Φ, we get;

λmax = (2 × 6.626 × 10⁻³⁴ J s × 2.998 × 10⁸ m s⁻¹) / (5.00 × 10⁻¹⁹ J)

λmax = 2.66 × 10⁻⁷ m

Converting this value to nanometers gives,λmax = 266 nm

Therefore, the answer is 266 nm.

Learn more about electromagnetic radiation: https://brainly.com/question/29646884

#SPJ11

Volume of 0.55 M NaOH needed to reach the equivalence point in a titration of 56.0mL of 0.45 M HClO_4 is 45.8 mL

The balanced equation for the reaction between NaOH and HClO4 is:

HClO4 + NaOH -> NaClO4 + H2O

From the balanced equation, we can see that the stoichiometric ratio between HClO4 and NaOH is 1:1. This means that 1 mole of HClO4 reacts with 1 mole of NaOH.

First, let's calculate the number of moles of HClO4 in 56.0 mL of 0.45 M solution:

moles of HClO4 = volume (L) × concentration (M)

= 0.056 L × 0.45 M

= 0.0252 moles

Since the stoichiometric ratio between HClO4 and NaOH is 1:1, we need an equal number of moles of NaOH to reach the equivalence point. Therefore, we need 0.0252 moles of NaOH.

Now, we can calculate the volume of 0.55 M NaOH solution needed to provide 0.0252 moles:

volume (L) = moles / concentration (M)

= 0.0252 moles / 0.55 M

= 0.0458 L

Finally, we convert the volume from liters to milliliters:

volume (mL) = 0.0458 L × 1000 mL/L

= 45.8 mL

Therefore, approximately 45.8 mL of 0.55 M NaOH solution is needed to reach the equivalence point in the titration of 56.0 mL of 0.45 M HClO4.

To learn more about equivalence point :

https://brainly.com/question/30592456

#SPJ11

From the question;

1) The mass of the Fuchsin is 0.35 g

2) The mass of the sodium bisulphite 6.3 g

3) The mass of the HCl is 2.2 g

The mole allows chemists to relate the mass of a substance to the number of atoms or molecules it contains. The molar mass of a substance is the mass of one mole of that substance and is expressed in grams per mole.

We know that;

Number of moles = Concentration * volume

Number of moles = mass/Molar mass

Mass of fuchsin = 0.0015 * 0.7 * 338

= 0.35 g

Mass of the sodium bisulphite = 0.086 * 0.7 * 104

= 6.3 g

Mass of the Hydrochloric acid = 0.086 * 0.7 * 36.5

= 2.2 g

Learn more about moles:https://brainly.com/question/15209553

#SPJ4

The mass percentage of Ar in the flask can be calculated by dividing the partial pressure of Ar by the total pressure and multiplying by 100.

To find the mass percentage of Ar in the flask, we need to consider the partial pressure of Ar and the total pressure.

The mass percentage can be calculated by dividing the partial pressure of Ar by the total pressure and multiplying by 100. In this case, the flask contains 0.3 atm of N2 and 0.7 atm of Ar.

Since we only need the partial pressure of Ar, we can use 0.7 atm as the numerator. To find the total pressure, we sum the partial pressures of N2 and Ar, which gives us 0.3 atm + 0.7 atm = 1 atm.

Plugging these values into the formula, we can calculate the mass percentage of Ar in the flask.

The mass percentage of a component in a mixture can be determined by considering the partial pressure or partial volume of that component and the total pressure or total volume of the mixture.

This calculation is particularly useful in gas mixtures, where each component contributes to the overall pressure.

By knowing the partial pressure of a specific gas and the total pressure, we can determine the proportion or percentage of that gas in the mixture.

It's important to note that the calculation of mass percentage assumes ideal gas behavior and that the gases in the mixture do not interact with each other.

Additionally, the molar mass of N2 is needed to convert the partial pressure of N2 to a mass percentage.

By understanding these concepts, we can accurately determine the mass percentage of Ar in the flask based on the given partial pressures.

Learn more about mass percentage

brainly.com/question/32197511

#SPJ11

The amount of heat needed to boil 81.2 g of ethanol from a temperature of 31.4°C is 9.19 kJ.

Specific heat is a physical property that quantifies the amount of heat energy required to raise the temperature of a substance by a certain amount. It is defined as the amount of heat energy needed to raise the temperature of one unit mass of a substance by one degree Celsius (or one Kelvin).

The specific heat capacity (often simply called specific heat) is expressed in units of joules per gram per degree Celsius (J/g°C) or joules per gram per Kelvin (J/gK). It represents the heat energy required to raise the temperature of one gram of the substance by one degree Celsius or one Kelvin.

Specific heat is unique to each substance and depends on its molecular structure, composition, and physical state. Substances with higher specific heat require more heat energy to raise their temperature compared to substances with lower specific heat.

The heat required to raise the temperature of the ethanol is given as -

Q = m × C × ΔT

Where:

Q is the heat (in joules),

m is the mass of ethanol (in grams),

C is the specific heat capacity of ethanol (2.44 J/g°C), and

ΔT is the change in temperature (in °C).

Q = 81.2 g × 2.44 J/g°C × (boiling point - 31.4°C)

Q = 81.2 g × 2.44 J/g°C × (78.4°C - 31.4°C)

= 81.2 g × 2.44 J/g°C × 47.0°C

= 9185.53 J

Q = 9.19 kJ

Learn more about Specific heat, here:

https://brainly.com/question/31608647

#SPJ4

The arrow that most closely describes the question "the absorption with the lowest energy" is a downward-pointing arrow ↓.

In spectroscopy, particularly in electronic transitions, absorption refers to the process where a molecule or atom absorbs electromagnetic radiation, typically in the form of photons, causing the promotion of an electron from a lower energy level to a higher energy level. The energy difference between the two levels determines the energy of the absorbed photon.

When considering the absorption with the lowest energy, it implies that the absorbed photons have the lowest energy among the available energy levels. In this context, the downward-pointing arrow (↓) is used to represent the absorption of lower energy photons.

In spectroscopic diagrams or energy level diagrams, the upward-pointing arrow (↑) is typically used to represent the absorption of higher energy photons. However, since the question specifically asks for the absorption with the lowest energy, the appropriate arrow would be a downward-pointing arrow (↓).

Therefore, the arrow that most closely describes the question "the absorption with the lowest energy" is a downward-pointing arrow ↓.

Learn more about spectroscopy: https://brainly.com/question/28457917

#SPJ11

The specific gravity of the massive block of carbon used as an anode at Alcoa for smelting aluminum oxide to aluminum would be 2.21. The specific gravity is the weight of a given material compared to the weight of an equal volume of water.

The equation is:

specific gravity = weight in air ÷ (weight in air - weight in water).

Given that a massive block of carbon is used as an anode at Alcoa for smelting aluminum oxide to aluminum and weighs 154.40 pounds, the weight of the block in water is 78.28 pounds.

Hence, the specific gravity can be calculated by using the formula below:

specific gravity = weight in air ÷ (weight in air - weight in water)

The weight in air is equal to the mass of the block, which is 154.40 pounds.

Therefore, substituting the values into the formula,

specific gravity = 154.40 pounds ÷ (154.40 pounds - 78.28 pounds) = 2.21

Thus, the specific gravity of the massive block of carbon used as an anode at Alcoa for smelting aluminum oxide to aluminum is 2.21.

Learn more about specific gravity at https://brainly.com/question/9100428

#SPJ11

This is because if the dissociation rate is slow, more monomers will be formed as compared to dimers, which will elute first, and as the dissociation rate is slow, the equilibrium will shift towards the formation of monomers instead of the dimer.There would be no peaks if the association rate is the same as the dissociation rate as the dimeric protein would be in equilibrium.

When the dissociation (forward) and association (reverse) rates are slow, two peaks appear on the chromatogram, one corresponding to the dimer and one corresponding to the monomer. The monomer would elute first as compared to the dimer, if the dissociation and association rates are slow.

This is because as the dissociation rate is slow, more dimers will be formed, and as the dimeric protein is larger than the monomeric protein, it will take more time for the dimer to pass through the gel matrix.The expected results if the association rate is much faster than the dissociation rate are that there would only be one peak corresponding to the dimer. This is because if the association rate is fast, more dimers will be formed, and the fast association rate will push the equilibrium towards the dimer.

The expected results if the association rate is much slower than the dissociation rate are that there would be two peaks; one corresponding to the dimer and one corresponding to the monomer.

To know more about  protein visit:

https://brainly.com/question/31017225

#SPJ11

The total mass of mercury present in the concentration 0.250μg (micrograms) per liter of water in the lake is 0.0077 kg.

Convert the concentration of mercury to grams per liter:

Concentration = 0.250 μg/L = 0.250 × 10^-6 g/L

Surface area of the lake = 10.0 square miles = 25.9 square kilometers

Average depth of the lake = 39.0 feet = 1188.72 centimeters

Volume of the lake = Surface area × Average depth

= 25.9 square kilometers × 1188.72 cm

= 30,748,968,000 cm³

= 30,748,968 liters

Determine the total mass of mercury in the lake:

Mass = Concentration × Volume

= 0.250 × 10^-6 g/L × 30,748,968 liters

= 7.687242 grams

Total mass of mercury in the lake = 7.687242 grams / 1000

= 0.007687242 kilograms

The calculated mass is 0.0077 kilograms (or 7.69 grams)

Learn more about mass at: https://brainly.com/question/86444

#SPJ11

When the pH of a solution equals the pKa of a weak acid, the concentration of the acid (HA) and its conjugate base (A-) are equal. This is known as the half-equivalence point. At this point, the acid is half-dissociated and half-undissociated.

The equation for the dissociation of a weak acid is:

HA ⇌ H+ + A-

The equilibrium constant for this reaction is known as the acid dissociation constant (Ka). The pKa is the negative logarithm of the Ka:

pKa = -log(Ka)

At the half-equivalence point, the concentration of HA and A- are equal. Let x be the concentration of HA and A-. Then:

[H+] = x

[HA] = S0 - x

[A-] = x

The Ka expression for the dissociation of HA is:

Ka = [H+][A-]/[HA]

Substituting the values above, we get:

Ka = x^2 / (S0 - x)

Taking the negative logarithm of both sides, we get:

-pKa = -log(Ka) = -log(x^2 / (S0 - x))

Simplifying, we get:

pKa = log(S0 - x) - 2log(x)

At the half-equivalence point, x = S0/2, so:

pKa = log(S0/2) - 2log(S0/2) = log(S0/2) - log(S0) = -log(2)

Therefore, the pKa of the weak acid is equal to -log(2) = 0.301. We can use this value and the given intrinsic solubility (S0 = 0.02 M) to calculate the total solubility of the weak acid:

pH = pKa

=> [H+] = 10^-pH = 10^-0.301 = 0.498 M

=> [A-] = [HA] = 0.02/2 = 0.01 M (at the half-equivalence point)

=> Total solubility = [HA] + [A-] = 0.01 + 0.01 = 0.02 M

Therefore, the total solubility of the weak acid is 0.02 M when the pH of the solution equals the pKa of the weak acid.

#SPJ11

For more such questions , visit https://brainly.com/question/28202068

Toluene is brominated faster during an electrophilic substitution reaction because it is more reactive towards the bromine water solution compared to nitrobenzene.

The reaction occurs as follows: Toluene reacts with bromine water in the presence of a catalyst such as iron (III) bromide to produce an intermediate, bromotoluene. Bromotoluene then reacts with bromine water to produce the final product, dibromotoluene. The electrophilic substitution reaction proceeds through the formation of a carbocation intermediate in the presence of a catalyst such as FeBr3.

The intermediate then undergoes attack by the electrophile, which in this case is bromine water, to produce the final product. Nitrobenzene, on the other hand, is less reactive towards electrophilic substitution reactions due to the presence of the nitro group which has an electron-withdrawing effect. This makes the carbocation intermediate less stable and hence less reactive toward the electrophile.

Therefore, nitrobenzene is brominated slower compared to toluene.

Learn more about "toluene" :

https://brainly.com/question/31235432

#SPJ11

Unfortunately, there is no given structure of the starting material in your question. Therefore, I cannot provide the answer as it is incomplete. Kindly provide me with the necessary details to enable me to assist you better.

Here are some general guidelines to help you modify structures:1. You must ensure that there is no violation of the octet rule for any of the atoms.2. You can use the single bond tool to interconvert between double and single bonds.3.

If there are multiple possible products, identify the major product by considering the stability of the intermediates involved.

To know more about material  visit:

https://brainly.com/question/30503992

#SPJ11